blob: c9c99646309e6bfba09b0d6d823de37c0d3c51b7 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Kumar Gala47d41cc2009-02-05 20:40:57 -06002/*
Poonam Aggrwalb8cdd012011-01-13 21:39:27 +05303 * Copyright 2009-2011 Freescale Semiconductor, Inc.
Kumar Gala47d41cc2009-02-05 20:40:57 -06004 */
5
6#ifndef _ASM_CONFIG_H_
7#define _ASM_CONFIG_H_
8
Kumar Gala243be8e2011-01-19 03:05:26 -06009#ifdef CONFIG_MPC85xx
10#include <asm/config_mpc85xx.h>
11#endif
12
13#ifdef CONFIG_MPC86xx
14#include <asm/config_mpc86xx.h>
York Sun5614e712013-09-30 09:22:09 -070015#endif
16
York Sun7ac3cc22012-08-17 09:00:54 +000017#ifndef HWCONFIG_BUFFER_SIZE
18 #define HWCONFIG_BUFFER_SIZE 256
19#endif
20
Mike Frysingera16028d2009-11-03 11:35:59 -050021#define CONFIG_LMB
John Rigbyfca43cc2010-10-13 13:57:35 -060022#define CONFIG_SYS_BOOT_RAMDISK_HIGH
Mike Frysingera16028d2009-11-03 11:35:59 -050023
Kumar Gala87c90632009-02-05 20:40:58 -060024#ifndef CONFIG_MAX_MEM_MAPPED
Heiko Schocher98f705c2017-06-27 16:49:14 +020025#if defined(CONFIG_E500) || \
York Sund29d17d2011-08-26 11:32:44 -070026 defined(CONFIG_MPC86xx) || \
27 defined(CONFIG_E300)
Kumar Gala87c90632009-02-05 20:40:58 -060028#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
29#else
Stefan Roese2ede8792009-02-11 09:37:12 +010030#define CONFIG_MAX_MEM_MAPPED (256 << 20)
Kumar Gala87c90632009-02-05 20:40:58 -060031#endif
32#endif
33
Peter Tyserf732a752009-07-15 00:01:08 -050034/* Check if boards need to enable FSL DMA engine for SDRAM init */
35#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC)
36#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \
37 ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \
38 !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
Peter Tyser017f11f2009-06-30 17:15:40 -050039#define CONFIG_FSL_DMA
Kumar Gala47d41cc2009-02-05 20:40:57 -060040#endif
Peter Tyser017f11f2009-06-30 17:15:40 -050041#endif
42
Peter Tyser5ccd29c2009-10-23 15:55:47 -050043/*
44 * Provide a default boot page translation virtual address that lines up with
45 * Freescale's default e500 reset page.
46 */
47#if (defined(CONFIG_E500) && defined(CONFIG_MP))
48#ifndef CONFIG_BPTR_VIRT_ADDR
49#define CONFIG_BPTR_VIRT_ADDR 0xfffff000
50#endif
51#endif
52
Becky Brucef51cdaf2010-06-17 11:37:20 -050053/* Since so many PPC SOCs have a semi-common LBC, define this here */
54#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
55 defined(CONFIG_MPC83xx)
Dipen Dudhatd789b5f2011-01-20 16:29:35 +053056#if !defined(CONFIG_FSL_IFC)
Becky Brucef51cdaf2010-06-17 11:37:20 -050057#define CONFIG_FSL_LBC
58#endif
Dipen Dudhatd789b5f2011-01-20 16:29:35 +053059#endif
Becky Brucef51cdaf2010-06-17 11:37:20 -050060
Andy Fleming063c1262011-04-08 02:10:54 -050061/* The TSEC driver uses the PHYLIB infrastructure */
Zhao Qiang990d06b2018-02-07 10:01:56 +080062#if defined(CONFIG_TSEC_ENET) && defined(CONFIG_PHYLIB)
Andy Fleming063c1262011-04-08 02:10:54 -050063#include <config_phylib_all_drivers.h>
64#endif /* TSEC_ENET */
Andy Fleming063c1262011-04-08 02:10:54 -050065
Kumar Galac916d7c2011-04-13 08:37:44 -050066/* The FMAN driver uses the PHYLIB infrastructure */
Kumar Galac916d7c2011-04-13 08:37:44 -050067
Albert Aribaudf2a37fc2010-08-08 05:17:05 +053068/* All PPC boards must swap IDE bytes */
69#define CONFIG_IDE_SWAP_IO
70
Mario Six07d538d2018-08-06 10:23:36 +020071#if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_CLK_MPC83XX)
Thomas Chouf27445c2015-11-19 21:48:07 +080072/*
73 * TODO: Convert this to a clock driver exists that can give us the UART
74 * clock here.
75 */
76#define CONFIG_SYS_NS16550_CLK get_serial_clock()
77#endif
78
Peter Tyser017f11f2009-06-30 17:15:40 -050079#endif /* _ASM_CONFIG_H_ */