| Patrick Delaunay | 5f16f65 | 2018-07-09 15:17:22 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 | /* |
| 3 | * Copyright (C) STMicroelectronics 2017 - All Rights Reserved |
| 4 | * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. |
| 5 | */ |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "stm32mp157c-ed1.dts" |
| 9 | |
| 10 | / { |
| 11 | model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; |
| 12 | compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; |
| 13 | |
| 14 | }; |
| 15 | |
| 16 | &cec { |
| 17 | pinctrl-names = "default"; |
| 18 | pinctrl-0 = <&cec_pins_a>; |
| 19 | status = "okay"; |
| 20 | }; |
| 21 | |
| 22 | &i2c2 { |
| 23 | pinctrl-names = "default"; |
| 24 | pinctrl-0 = <&i2c2_pins_a>; |
| 25 | i2c-scl-rising-time-ns = <185>; |
| 26 | i2c-scl-falling-time-ns = <20>; |
| 27 | status = "okay"; |
| 28 | }; |
| 29 | |
| 30 | &i2c5 { |
| 31 | pinctrl-names = "default"; |
| 32 | pinctrl-0 = <&i2c5_pins_a>; |
| 33 | i2c-scl-rising-time-ns = <185>; |
| 34 | i2c-scl-falling-time-ns = <20>; |
| 35 | status = "okay"; |
| 36 | }; |
| 37 | |
| 38 | &qspi { |
| 39 | pinctrl-names = "default"; |
| 40 | pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; |
| 41 | reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; |
| 42 | #address-cells = <1>; |
| 43 | #size-cells = <0>; |
| 44 | status = "okay"; |
| 45 | |
| 46 | flash0: mx66l51235l@0 { |
| 47 | reg = <0>; |
| 48 | spi-rx-bus-width = <4>; |
| 49 | spi-max-frequency = <108000000>; |
| 50 | #address-cells = <1>; |
| 51 | #size-cells = <1>; |
| 52 | }; |
| 53 | |
| 54 | flash1: mx66l51235l@1 { |
| 55 | reg = <1>; |
| 56 | spi-rx-bus-width = <4>; |
| 57 | spi-max-frequency = <108000000>; |
| 58 | #address-cells = <1>; |
| 59 | #size-cells = <1>; |
| 60 | }; |
| 61 | }; |
| 62 | |
| 63 | &timers2 { |
| 64 | status = "disabled"; |
| 65 | pwm { |
| 66 | pinctrl-0 = <&pwm2_pins_a>; |
| 67 | pinctrl-names = "default"; |
| 68 | status = "okay"; |
| 69 | }; |
| 70 | timer@1 { |
| 71 | status = "okay"; |
| 72 | }; |
| 73 | }; |
| 74 | |
| 75 | &timers8 { |
| 76 | status = "disabled"; |
| 77 | pwm { |
| 78 | pinctrl-0 = <&pwm8_pins_a>; |
| 79 | pinctrl-names = "default"; |
| 80 | status = "okay"; |
| 81 | }; |
| 82 | timer@7 { |
| 83 | status = "okay"; |
| 84 | }; |
| 85 | }; |
| 86 | |
| 87 | &timers12 { |
| 88 | status = "disabled"; |
| 89 | pwm { |
| 90 | pinctrl-0 = <&pwm12_pins_a>; |
| 91 | pinctrl-names = "default"; |
| 92 | status = "okay"; |
| 93 | }; |
| 94 | timer@11 { |
| 95 | status = "okay"; |
| 96 | }; |
| 97 | }; |
| 98 | |
| 99 | &usbphyc { |
| 100 | status = "okay"; |
| 101 | }; |