blob: a128ee484145f306e1e994249626ef80ac915367 [file] [log] [blame]
Simon Glass1a736612016-02-29 15:25:39 -07001/*
2 * (C) Copyright 2000-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef BLK_H
9#define BLK_H
10
11#ifdef CONFIG_SYS_64BIT_LBA
12typedef uint64_t lbaint_t;
13#define LBAFlength "ll"
14#else
15typedef ulong lbaint_t;
16#define LBAFlength "l"
17#endif
18#define LBAF "%" LBAFlength "x"
19#define LBAFU "%" LBAFlength "u"
20
21/* Interface types: */
Simon Glass5ec4f1a2016-02-29 15:25:40 -070022enum if_type {
23 IF_TYPE_UNKNOWN = 0,
24 IF_TYPE_IDE,
25 IF_TYPE_SCSI,
26 IF_TYPE_ATAPI,
27 IF_TYPE_USB,
28 IF_TYPE_DOC,
29 IF_TYPE_MMC,
30 IF_TYPE_SD,
31 IF_TYPE_SATA,
32 IF_TYPE_HOST,
Simon Glass3ef85e32016-05-01 11:36:04 -060033 IF_TYPE_SYSTEMACE,
Simon Glass5ec4f1a2016-02-29 15:25:40 -070034
35 IF_TYPE_COUNT, /* Number of interface types */
36};
Simon Glass1a736612016-02-29 15:25:39 -070037
Simon Glass09d71aa2016-02-29 15:25:55 -070038/*
39 * With driver model (CONFIG_BLK) this is uclass platform data, accessible
40 * with dev_get_uclass_platdata(dev)
41 */
Simon Glass1a736612016-02-29 15:25:39 -070042struct blk_desc {
Simon Glass09d71aa2016-02-29 15:25:55 -070043 /*
44 * TODO: With driver model we should be able to use the parent
45 * device's uclass instead.
46 */
Simon Glass5ec4f1a2016-02-29 15:25:40 -070047 enum if_type if_type; /* type of the interface */
Simon Glassbcce53d2016-02-29 15:25:51 -070048 int devnum; /* device number */
Simon Glass1a736612016-02-29 15:25:39 -070049 unsigned char part_type; /* partition type */
50 unsigned char target; /* target SCSI ID */
51 unsigned char lun; /* target LUN */
52 unsigned char hwpart; /* HW partition, e.g. for eMMC */
53 unsigned char type; /* device type */
54 unsigned char removable; /* removable device */
55#ifdef CONFIG_LBA48
56 /* device can use 48bit addr (ATA/ATAPI v7) */
57 unsigned char lba48;
58#endif
59 lbaint_t lba; /* number of blocks */
60 unsigned long blksz; /* block size */
61 int log2blksz; /* for convenience: log2(blksz) */
62 char vendor[40+1]; /* IDE model, SCSI Vendor */
63 char product[20+1]; /* IDE Serial no, SCSI product */
64 char revision[8+1]; /* firmware revision */
Simon Glass09d71aa2016-02-29 15:25:55 -070065#ifdef CONFIG_BLK
Simon Glassb6694a32016-05-01 13:52:33 -060066 /*
67 * For now we have a few functions which take struct blk_desc as a
68 * parameter. This field allows them to look up the associated
69 * device. Once these functions are removed we can drop this field.
70 */
Simon Glass09d71aa2016-02-29 15:25:55 -070071 struct udevice *bdev;
72#else
Simon Glass1a736612016-02-29 15:25:39 -070073 unsigned long (*block_read)(struct blk_desc *block_dev,
74 lbaint_t start,
75 lbaint_t blkcnt,
76 void *buffer);
77 unsigned long (*block_write)(struct blk_desc *block_dev,
78 lbaint_t start,
79 lbaint_t blkcnt,
80 const void *buffer);
81 unsigned long (*block_erase)(struct blk_desc *block_dev,
82 lbaint_t start,
83 lbaint_t blkcnt);
84 void *priv; /* driver private struct pointer */
Simon Glass09d71aa2016-02-29 15:25:55 -070085#endif
Simon Glass1a736612016-02-29 15:25:39 -070086};
87
88#define BLOCK_CNT(size, blk_desc) (PAD_COUNT(size, blk_desc->blksz))
89#define PAD_TO_BLOCKSIZE(size, blk_desc) \
90 (PAD_SIZE(size, blk_desc->blksz))
91
Eric Nelsone40cf342016-03-28 10:05:44 -070092#ifdef CONFIG_BLOCK_CACHE
93/**
94 * blkcache_read() - attempt to read a set of blocks from cache
95 *
96 * @param iftype - IF_TYPE_x for type of device
97 * @param dev - device index of particular type
98 * @param start - starting block number
99 * @param blkcnt - number of blocks to read
100 * @param blksz - size in bytes of each block
101 * @param buf - buffer to contain cached data
102 *
103 * @return - '1' if block returned from cache, '0' otherwise.
104 */
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700105int blkcache_read(int iftype, int dev,
106 lbaint_t start, lbaint_t blkcnt,
107 unsigned long blksz, void *buffer);
Eric Nelsone40cf342016-03-28 10:05:44 -0700108
109/**
110 * blkcache_fill() - make data read from a block device available
111 * to the block cache
112 *
113 * @param iftype - IF_TYPE_x for type of device
114 * @param dev - device index of particular type
115 * @param start - starting block number
116 * @param blkcnt - number of blocks available
117 * @param blksz - size in bytes of each block
118 * @param buf - buffer containing data to cache
119 *
120 */
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700121void blkcache_fill(int iftype, int dev,
122 lbaint_t start, lbaint_t blkcnt,
123 unsigned long blksz, void const *buffer);
Eric Nelsone40cf342016-03-28 10:05:44 -0700124
125/**
126 * blkcache_invalidate() - discard the cache for a set of blocks
127 * because of a write or device (re)initialization.
128 *
129 * @param iftype - IF_TYPE_x for type of device
130 * @param dev - device index of particular type
131 */
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700132void blkcache_invalidate(int iftype, int dev);
Eric Nelsone40cf342016-03-28 10:05:44 -0700133
134/**
135 * blkcache_configure() - configure block cache
136 *
137 * @param blocks - maximum blocks per entry
138 * @param entries - maximum entries in cache
139 */
140void blkcache_configure(unsigned blocks, unsigned entries);
141
142/*
143 * statistics of the block cache
144 */
145struct block_cache_stats {
146 unsigned hits;
147 unsigned misses;
148 unsigned entries; /* current entry count */
149 unsigned max_blocks_per_entry;
150 unsigned max_entries;
151};
152
153/**
154 * get_blkcache_stats() - return statistics and reset
155 *
156 * @param stats - statistics are copied here
157 */
158void blkcache_stats(struct block_cache_stats *stats);
159
160#else
161
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700162static inline int blkcache_read(int iftype, int dev,
163 lbaint_t start, lbaint_t blkcnt,
164 unsigned long blksz, void *buffer)
Eric Nelsone40cf342016-03-28 10:05:44 -0700165{
166 return 0;
167}
168
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700169static inline void blkcache_fill(int iftype, int dev,
170 lbaint_t start, lbaint_t blkcnt,
171 unsigned long blksz, void const *buffer) {}
Eric Nelsone40cf342016-03-28 10:05:44 -0700172
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700173static inline void blkcache_invalidate(int iftype, int dev) {}
Eric Nelsone40cf342016-03-28 10:05:44 -0700174
175#endif
176
Simon Glass09d71aa2016-02-29 15:25:55 -0700177#ifdef CONFIG_BLK
178struct udevice;
179
180/* Operations on block devices */
181struct blk_ops {
182 /**
183 * read() - read from a block device
184 *
185 * @dev: Device to read from
186 * @start: Start block number to read (0=first)
187 * @blkcnt: Number of blocks to read
188 * @buffer: Destination buffer for data read
189 * @return number of blocks read, or -ve error number (see the
190 * IS_ERR_VALUE() macro
191 */
192 unsigned long (*read)(struct udevice *dev, lbaint_t start,
193 lbaint_t blkcnt, void *buffer);
194
195 /**
196 * write() - write to a block device
197 *
198 * @dev: Device to write to
199 * @start: Start block number to write (0=first)
200 * @blkcnt: Number of blocks to write
201 * @buffer: Source buffer for data to write
202 * @return number of blocks written, or -ve error number (see the
203 * IS_ERR_VALUE() macro
204 */
205 unsigned long (*write)(struct udevice *dev, lbaint_t start,
206 lbaint_t blkcnt, const void *buffer);
207
208 /**
209 * erase() - erase a section of a block device
210 *
211 * @dev: Device to (partially) erase
212 * @start: Start block number to erase (0=first)
213 * @blkcnt: Number of blocks to erase
214 * @return number of blocks erased, or -ve error number (see the
215 * IS_ERR_VALUE() macro
216 */
217 unsigned long (*erase)(struct udevice *dev, lbaint_t start,
218 lbaint_t blkcnt);
Simon Glasscd0fb552016-05-01 13:52:30 -0600219
220 /**
221 * select_hwpart() - select a particular hardware partition
222 *
223 * Some devices (e.g. MMC) can support partitioning at the hardware
224 * level. This is quite separate from the normal idea of
225 * software-based partitions. MMC hardware partitions must be
226 * explicitly selected. Once selected only the region of the device
227 * covered by that partition is accessible.
228 *
229 * The MMC standard provides for two boot partitions (numbered 1 and 2),
230 * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
231 *
232 * @desc: Block device to update
233 * @hwpart: Hardware partition number to select. 0 means the raw
234 * device, 1 is the first partition, 2 is the second, etc.
235 * @return 0 if OK, -ve on error
236 */
237 int (*select_hwpart)(struct udevice *dev, int hwpart);
Simon Glass09d71aa2016-02-29 15:25:55 -0700238};
239
240#define blk_get_ops(dev) ((struct blk_ops *)(dev)->driver->ops)
241
242/*
243 * These functions should take struct udevice instead of struct blk_desc,
244 * but this is convenient for migration to driver model. Add a 'd' prefix
245 * to the function operations, so that blk_read(), etc. can be reserved for
246 * functions with the correct arguments.
247 */
248unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
249 lbaint_t blkcnt, void *buffer);
250unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
251 lbaint_t blkcnt, const void *buffer);
252unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
253 lbaint_t blkcnt);
254
255/**
Simon Glass61392812017-04-23 20:02:05 -0600256 * blk_find_device() - Find a block device
257 *
258 * This function does not activate the device. The device will be returned
259 * whether or not it is activated.
260 *
261 * @if_type: Interface type (enum if_type_t)
262 * @devnum: Device number (specific to each interface type)
263 * @devp: the device, if found
264 * @return 0 if found, -ENODEV if no device found, or other -ve error value
265 */
266int blk_find_device(int if_type, int devnum, struct udevice **devp);
267
268/**
Simon Glass09d71aa2016-02-29 15:25:55 -0700269 * blk_get_device() - Find and probe a block device ready for use
270 *
271 * @if_type: Interface type (enum if_type_t)
272 * @devnum: Device number (specific to each interface type)
273 * @devp: the device, if found
Simon Glass61392812017-04-23 20:02:05 -0600274 * @return 0 if found, -ENODEV if no device found, or other -ve error value
Simon Glass09d71aa2016-02-29 15:25:55 -0700275 */
276int blk_get_device(int if_type, int devnum, struct udevice **devp);
277
278/**
279 * blk_first_device() - Find the first device for a given interface
280 *
281 * The device is probed ready for use
282 *
283 * @devnum: Device number (specific to each interface type)
284 * @devp: the device, if found
285 * @return 0 if found, -ENODEV if no device, or other -ve error value
286 */
287int blk_first_device(int if_type, struct udevice **devp);
288
289/**
290 * blk_next_device() - Find the next device for a given interface
291 *
292 * This can be called repeatedly after blk_first_device() to iterate through
293 * all devices of the given interface type.
294 *
295 * The device is probed ready for use
296 *
297 * @devp: On entry, the previous device returned. On exit, the next
298 * device, if found
299 * @return 0 if found, -ENODEV if no device, or other -ve error value
300 */
301int blk_next_device(struct udevice **devp);
302
303/**
304 * blk_create_device() - Create a new block device
305 *
306 * @parent: Parent of the new device
307 * @drv_name: Driver name to use for the block device
308 * @name: Name for the device
309 * @if_type: Interface type (enum if_type_t)
Simon Glass52138fd2016-05-01 11:36:28 -0600310 * @devnum: Device number, specific to the interface type, or -1 to
311 * allocate the next available number
Simon Glass09d71aa2016-02-29 15:25:55 -0700312 * @blksz: Block size of the device in bytes (typically 512)
313 * @size: Total size of the device in bytes
314 * @devp: the new device (which has not been probed)
315 */
316int blk_create_device(struct udevice *parent, const char *drv_name,
317 const char *name, int if_type, int devnum, int blksz,
318 lbaint_t size, struct udevice **devp);
319
320/**
Simon Glass9107c972016-05-01 11:36:29 -0600321 * blk_create_devicef() - Create a new named block device
322 *
323 * @parent: Parent of the new device
324 * @drv_name: Driver name to use for the block device
325 * @name: Name for the device (parent name is prepended)
326 * @if_type: Interface type (enum if_type_t)
327 * @devnum: Device number, specific to the interface type, or -1 to
328 * allocate the next available number
329 * @blksz: Block size of the device in bytes (typically 512)
330 * @size: Total size of the device in bytes
331 * @devp: the new device (which has not been probed)
332 */
333int blk_create_devicef(struct udevice *parent, const char *drv_name,
334 const char *name, int if_type, int devnum, int blksz,
335 lbaint_t size, struct udevice **devp);
336
337/**
Simon Glass09d71aa2016-02-29 15:25:55 -0700338 * blk_prepare_device() - Prepare a block device for use
339 *
340 * This reads partition information from the device if supported.
341 *
342 * @dev: Device to prepare
343 * @return 0 if ok, -ve on error
344 */
345int blk_prepare_device(struct udevice *dev);
346
347/**
348 * blk_unbind_all() - Unbind all device of the given interface type
349 *
350 * The devices are removed and then unbound.
351 *
352 * @if_type: Interface type to unbind
353 * @return 0 if OK, -ve on error
354 */
355int blk_unbind_all(int if_type);
356
Simon Glass52138fd2016-05-01 11:36:28 -0600357/**
358 * blk_find_max_devnum() - find the maximum device number for an interface type
359 *
360 * Finds the last allocated device number for an interface type @if_type. The
361 * next number is safe to use for a newly allocated device.
362 *
363 * @if_type: Interface type to scan
364 * @return maximum device number found, or -ENODEV if none, or other -ve on
365 * error
366 */
367int blk_find_max_devnum(enum if_type if_type);
368
Simon Glasscd0fb552016-05-01 13:52:30 -0600369/**
370 * blk_select_hwpart() - select a hardware partition
371 *
372 * Select a hardware partition if the device supports it (typically MMC does)
373 *
374 * @dev: Device to update
375 * @hwpart: Partition number to select
376 * @return 0 if OK, -ve on error
377 */
378int blk_select_hwpart(struct udevice *dev, int hwpart);
379
Simon Glass09d71aa2016-02-29 15:25:55 -0700380#else
381#include <errno.h>
Simon Glass2a981dc2016-02-29 15:25:52 -0700382/*
383 * These functions should take struct udevice instead of struct blk_desc,
384 * but this is convenient for migration to driver model. Add a 'd' prefix
385 * to the function operations, so that blk_read(), etc. can be reserved for
386 * functions with the correct arguments.
387 */
388static inline ulong blk_dread(struct blk_desc *block_dev, lbaint_t start,
389 lbaint_t blkcnt, void *buffer)
390{
Eric Nelsone40cf342016-03-28 10:05:44 -0700391 ulong blks_read;
392 if (blkcache_read(block_dev->if_type, block_dev->devnum,
393 start, blkcnt, block_dev->blksz, buffer))
394 return blkcnt;
395
Simon Glass2a981dc2016-02-29 15:25:52 -0700396 /*
397 * We could check if block_read is NULL and return -ENOSYS. But this
398 * bloats the code slightly (cause some board to fail to build), and
399 * it would be an error to try an operation that does not exist.
400 */
Eric Nelsone40cf342016-03-28 10:05:44 -0700401 blks_read = block_dev->block_read(block_dev, start, blkcnt, buffer);
402 if (blks_read == blkcnt)
403 blkcache_fill(block_dev->if_type, block_dev->devnum,
404 start, blkcnt, block_dev->blksz, buffer);
405
406 return blks_read;
Simon Glass2a981dc2016-02-29 15:25:52 -0700407}
408
409static inline ulong blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
410 lbaint_t blkcnt, const void *buffer)
411{
Eric Nelsone40cf342016-03-28 10:05:44 -0700412 blkcache_invalidate(block_dev->if_type, block_dev->devnum);
Simon Glass2a981dc2016-02-29 15:25:52 -0700413 return block_dev->block_write(block_dev, start, blkcnt, buffer);
414}
415
416static inline ulong blk_derase(struct blk_desc *block_dev, lbaint_t start,
417 lbaint_t blkcnt)
418{
Eric Nelsone40cf342016-03-28 10:05:44 -0700419 blkcache_invalidate(block_dev->if_type, block_dev->devnum);
Simon Glass2a981dc2016-02-29 15:25:52 -0700420 return block_dev->block_erase(block_dev, start, blkcnt);
421}
Simon Glass6eef6ea2016-05-01 11:36:03 -0600422
423/**
424 * struct blk_driver - Driver for block interface types
425 *
426 * This provides access to the block devices for each interface type. One
427 * driver should be provided using U_BOOT_LEGACY_BLK() for each interface
428 * type that is to be supported.
429 *
430 * @if_typename: Interface type name
431 * @if_type: Interface type
432 * @max_devs: Maximum number of devices supported
433 * @desc: Pointer to list of devices for this interface type,
434 * or NULL to use @get_dev() instead
435 */
436struct blk_driver {
437 const char *if_typename;
438 enum if_type if_type;
439 int max_devs;
440 struct blk_desc *desc;
441 /**
442 * get_dev() - get a pointer to a block device given its number
443 *
444 * Each interface allocates its own devices and typically
445 * struct blk_desc is contained with the interface's data structure.
446 * There is no global numbering for block devices. This method allows
447 * the device for an interface type to be obtained when @desc is NULL.
448 *
449 * @devnum: Device number (0 for first device on that interface,
450 * 1 for second, etc.
451 * @descp: Returns pointer to the block device on success
452 * @return 0 if OK, -ve on error
453 */
454 int (*get_dev)(int devnum, struct blk_desc **descp);
455
456 /**
457 * select_hwpart() - Select a hardware partition
458 *
459 * Some devices (e.g. MMC) can support partitioning at the hardware
460 * level. This is quite separate from the normal idea of
461 * software-based partitions. MMC hardware partitions must be
462 * explicitly selected. Once selected only the region of the device
463 * covered by that partition is accessible.
464 *
465 * The MMC standard provides for two boot partitions (numbered 1 and 2),
466 * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
467 * Partition 0 is the main user-data partition.
468 *
469 * @desc: Block device descriptor
470 * @hwpart: Hardware partition number to select. 0 means the main
471 * user-data partition, 1 is the first partition, 2 is
472 * the second, etc.
473 * @return 0 if OK, other value for an error
474 */
475 int (*select_hwpart)(struct blk_desc *desc, int hwpart);
476};
477
478/*
479 * Declare a new U-Boot legacy block driver. New drivers should use driver
480 * model (UCLASS_BLK).
481 */
482#define U_BOOT_LEGACY_BLK(__name) \
483 ll_entry_declare(struct blk_driver, __name, blk_driver)
484
485struct blk_driver *blk_driver_lookup_type(int if_type);
486
Simon Glass09d71aa2016-02-29 15:25:55 -0700487#endif /* !CONFIG_BLK */
Simon Glass2a981dc2016-02-29 15:25:52 -0700488
Simon Glass6eef6ea2016-05-01 11:36:03 -0600489/**
490 * blk_get_devnum_by_typename() - Get a block device by type and number
491 *
492 * This looks through the available block devices of the given type, returning
493 * the one with the given @devnum.
494 *
495 * @if_type: Block device type
496 * @devnum: Device number
497 * @return point to block device descriptor, or NULL if not found
498 */
499struct blk_desc *blk_get_devnum_by_type(enum if_type if_type, int devnum);
500
501/**
502 * blk_get_devnum_by_type() - Get a block device by type name, and number
503 *
504 * This looks up the block device type based on @if_typename, then calls
505 * blk_get_devnum_by_type().
506 *
507 * @if_typename: Block device type name
508 * @devnum: Device number
509 * @return point to block device descriptor, or NULL if not found
510 */
511struct blk_desc *blk_get_devnum_by_typename(const char *if_typename,
512 int devnum);
513
514/**
515 * blk_dselect_hwpart() - select a hardware partition
516 *
517 * This selects a hardware partition (such as is supported by MMC). The block
518 * device size may change as this effectively points the block device to a
519 * partition at the hardware level. See the select_hwpart() method above.
520 *
521 * @desc: Block device descriptor for the device to select
522 * @hwpart: Partition number to select
523 * @return 0 if OK, -ve on error
524 */
525int blk_dselect_hwpart(struct blk_desc *desc, int hwpart);
526
527/**
528 * blk_list_part() - list the partitions for block devices of a given type
529 *
530 * This looks up the partition type for each block device of type @if_type,
531 * then displays a list of partitions.
532 *
533 * @if_type: Block device type
534 * @return 0 if OK, -ENODEV if there is none of that type
535 */
536int blk_list_part(enum if_type if_type);
537
538/**
539 * blk_list_devices() - list the block devices of a given type
540 *
541 * This lists each block device of the type @if_type, showing the capacity
542 * as well as type-specific information.
543 *
544 * @if_type: Block device type
545 */
546void blk_list_devices(enum if_type if_type);
547
548/**
549 * blk_show_device() - show information about a given block device
550 *
551 * This shows the block device capacity as well as type-specific information.
552 *
553 * @if_type: Block device type
554 * @devnum: Device number
555 * @return 0 if OK, -ENODEV for invalid device number
556 */
557int blk_show_device(enum if_type if_type, int devnum);
558
559/**
560 * blk_print_device_num() - show information about a given block device
561 *
562 * This is similar to blk_show_device() but returns an error if the block
563 * device type is unknown.
564 *
565 * @if_type: Block device type
566 * @devnum: Device number
567 * @return 0 if OK, -ENODEV for invalid device number, -ENOENT if the block
568 * device is not connected
569 */
570int blk_print_device_num(enum if_type if_type, int devnum);
571
572/**
573 * blk_print_part_devnum() - print the partition information for a device
574 *
575 * @if_type: Block device type
576 * @devnum: Device number
577 * @return 0 if OK, -ENOENT if the block device is not connected, -ENOSYS if
578 * the interface type is not supported, other -ve on other error
579 */
580int blk_print_part_devnum(enum if_type if_type, int devnum);
581
582/**
583 * blk_read_devnum() - read blocks from a device
584 *
585 * @if_type: Block device type
586 * @devnum: Device number
587 * @blkcnt: Number of blocks to read
588 * @buffer: Address to write data to
589 * @return number of blocks read, or -ve error number on error
590 */
591ulong blk_read_devnum(enum if_type if_type, int devnum, lbaint_t start,
592 lbaint_t blkcnt, void *buffer);
593
594/**
595 * blk_write_devnum() - write blocks to a device
596 *
597 * @if_type: Block device type
598 * @devnum: Device number
599 * @blkcnt: Number of blocks to write
600 * @buffer: Address to read data from
601 * @return number of blocks written, or -ve error number on error
602 */
603ulong blk_write_devnum(enum if_type if_type, int devnum, lbaint_t start,
604 lbaint_t blkcnt, const void *buffer);
605
606/**
607 * blk_select_hwpart_devnum() - select a hardware partition
608 *
609 * This is similar to blk_dselect_hwpart() but it looks up the interface and
610 * device number.
611 *
612 * @if_type: Block device type
613 * @devnum: Device number
614 * @hwpart: Partition number to select
615 * @return 0 if OK, -ve on error
616 */
617int blk_select_hwpart_devnum(enum if_type if_type, int devnum, int hwpart);
618
Simon Glass1a736612016-02-29 15:25:39 -0700619#endif