blob: 8731fc64b4e0319d6d8c69c8b12fe8dff8079978 [file] [log] [blame]
Masahiro Yamada22433fc2014-02-04 17:24:27 +09001# Backward compatibility
2asflags-y += $(EXTRA_AFLAGS)
3ccflags-y += $(EXTRA_CFLAGS)
4cppflags-y += $(EXTRA_CPPFLAGS)
5ldflags-y += $(EXTRA_LDFLAGS)
6
7#
8# flags that take effect in sub directories
9export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
10export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
11
12# Figure out what we need to build from the various variables
13# ===========================================================================
14
15# When an object is listed to be built compiled-in and modular,
16# only build the compiled-in version
17
18obj-m := $(filter-out $(obj-y),$(obj-m))
19
20# Libraries are always collected in one lib file.
21# Filter out objects already built-in
22
23lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
24
25
26# Handle objects in subdirs
27# ---------------------------------------------------------------------------
28# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
29# and add the directory to the list of dirs to descend into: $(subdir-y)
Masahiro Yamada45f0ad92014-06-16 18:56:38 +090030# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
Masahiro Yamada22433fc2014-02-04 17:24:27 +090031# and add the directory to the list of dirs to descend into: $(subdir-m)
32
33# Determine modorder.
34# Unfortunately, we don't have information about ordering between -y
35# and -m subdirs. Just put -y's first.
36modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
37
38__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
39subdir-y += $(__subdir-y)
40__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
41subdir-m += $(__subdir-m)
42obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
43obj-m := $(filter-out %/, $(obj-m))
44
45# Subdirectories we need to descend into
46
47subdir-ym := $(sort $(subdir-y) $(subdir-m))
48
Masahiro Yamada45f0ad92014-06-16 18:56:38 +090049# if $(foo-objs) exists, foo.o is a composite object
Masahiro Yamada22433fc2014-02-04 17:24:27 +090050multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
51multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
52multi-used := $(multi-used-y) $(multi-used-m)
53single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
54
55# Build list of the parts of our composite objects, our composite
56# objects depend on those (obviously)
57multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
58multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
59multi-objs := $(multi-objs-y) $(multi-objs-m)
60
61# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
62# tell kbuild to descend
63subdir-obj-y := $(filter %/built-in.o, $(obj-y))
64
65# $(obj-dirs) is a list of directories that contain object files
66obj-dirs := $(dir $(multi-objs) $(obj-y))
67
68# Replace multi-part objects by their individual parts, look at local dir only
69real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
70real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
71
72# Add subdir path
73
74extra-y := $(addprefix $(obj)/,$(extra-y))
75always := $(addprefix $(obj)/,$(always))
76targets := $(addprefix $(obj)/,$(targets))
77modorder := $(addprefix $(obj)/,$(modorder))
78obj-y := $(addprefix $(obj)/,$(obj-y))
79obj-m := $(addprefix $(obj)/,$(obj-m))
80lib-y := $(addprefix $(obj)/,$(lib-y))
81subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
82real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
83real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
84single-used-m := $(addprefix $(obj)/,$(single-used-m))
85multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
86multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
87multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
88multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
89subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
90obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
91
92# These flags are needed for modversions and compiling, so we define them here
93# already
Masahiro Yamada45f0ad92014-06-16 18:56:38 +090094# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
Masahiro Yamada22433fc2014-02-04 17:24:27 +090095# end up in (or would, if it gets compiled in)
96# Note: Files that end up in two or more modules are compiled without the
97# KBUILD_MODNAME definition. The reason is that any made-up name would
98# differ in different configs.
99name-fix = $(subst $(comma),_,$(subst -,_,$1))
100basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
101modname_flags = $(if $(filter 1,$(words $(modname))),\
102 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
103
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900104orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900105 $(ccflags-y) $(CFLAGS_$(basetarget).o)
106_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900107_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900108 $(asflags-y) $(AFLAGS_$(basetarget).o)
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900109_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900110
111#
112# Enable gcov profiling flags for a file, directory or for all files depending
113# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
114# (in this order)
115#
116ifeq ($(CONFIG_GCOV_KERNEL),y)
117_c_flags += $(if $(patsubst n%,, \
118 $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
119 $(CFLAGS_GCOV))
120endif
121
122# If building the kernel in a separate objtree expand all occurrences
123# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
124
125ifeq ($(KBUILD_SRC),)
126__c_flags = $(_c_flags)
127__a_flags = $(_a_flags)
128__cpp_flags = $(_cpp_flags)
129else
130
131# -I$(obj) locates generated .h files
132# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
133# and locates generated .h files
134# FIXME: Replace both with specific CFLAGS* statements in the makefiles
135__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
136__a_flags = $(call flags,_a_flags)
137__cpp_flags = $(call flags,_cpp_flags)
138endif
139
Masahiro Yamada6825a952014-02-04 17:24:28 +0900140# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
141c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900142 $(__c_flags) $(modkern_cflags) \
143 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
144
Masahiro Yamada6825a952014-02-04 17:24:28 +0900145a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900146 $(__a_flags) $(modkern_aflags)
147
Masahiro Yamada6825a952014-02-04 17:24:28 +0900148cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900149 $(__cpp_flags)
150
151ld_flags = $(LDFLAGS) $(ldflags-y)
152
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900153# Modified for U-Boot
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900154dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900155 -I$(srctree)/arch/$(ARCH)/dts \
Simon Glass5957ac22014-06-11 23:29:44 -0600156 -I$(srctree)/arch/$(ARCH)/dts/include \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900157 -undef -D__DTS__
158
159# Finds the multi-part object the current object will be linked into
160modname-multi = $(sort $(foreach m,$(multi-used),\
161 $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
162
Masahiro Yamadacb6e7b02014-10-30 11:06:10 +0900163# Useful for describing the dependency of composite objects
164# Usage:
165# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
166define multi_depend
167$(foreach m, $(notdir $1), \
168 $(eval $(obj)/$m: \
169 $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
170endef
171
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900172ifdef REGENERATE_PARSERS
173
174# GPERF
175# ---------------------------------------------------------------------------
176quiet_cmd_gperf = GPERF $@
177 cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
178
179.PRECIOUS: $(src)/%.hash.c_shipped
180$(src)/%.hash.c_shipped: $(src)/%.gperf
181 $(call cmd,gperf)
182
183# LEX
184# ---------------------------------------------------------------------------
185LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)
186
187quiet_cmd_flex = LEX $@
188 cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
189
190.PRECIOUS: $(src)/%.lex.c_shipped
191$(src)/%.lex.c_shipped: $(src)/%.l
192 $(call cmd,flex)
193
194# YACC
195# ---------------------------------------------------------------------------
196YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)
197
198quiet_cmd_bison = YACC $@
199 cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
200
201.PRECIOUS: $(src)/%.tab.c_shipped
202$(src)/%.tab.c_shipped: $(src)/%.y
203 $(call cmd,bison)
204
205quiet_cmd_bison_h = YACC $@
206 cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
207
208.PRECIOUS: $(src)/%.tab.h_shipped
209$(src)/%.tab.h_shipped: $(src)/%.y
210 $(call cmd,bison_h)
211
212endif
213
214# Shipped files
215# ===========================================================================
216
217quiet_cmd_shipped = SHIPPED $@
218cmd_shipped = cat $< > $@
219
220$(obj)/%: $(src)/%_shipped
221 $(call cmd,shipped)
222
223# Commands useful for building a boot image
224# ===========================================================================
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900225#
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900226# Use as following:
227#
228# target: source(s) FORCE
229# $(if_changed,ld/objcopy/gzip)
230#
231# and add target to extra-y so that we know we have to
232# read in the saved command line
233
234# Linking
235# ---------------------------------------------------------------------------
236
237quiet_cmd_ld = LD $@
238cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900239 $(filter-out FORCE,$^) -o $@
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900240
241# Objcopy
242# ---------------------------------------------------------------------------
243
244quiet_cmd_objcopy = OBJCOPY $@
245cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
246
247# Gzip
248# ---------------------------------------------------------------------------
249
250quiet_cmd_gzip = GZIP $@
251cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
252 (rm -f $@ ; false)
253
254# DTC
255# ---------------------------------------------------------------------------
256
257# Generate an assembly file to wrap the output of the device tree compiler
258quiet_cmd_dt_S_dtb= DTB $@
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900259# Modified for U-Boot
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900260cmd_dt_S_dtb= \
261( \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900262 echo '.section .dtb.init.rodata,"a"'; \
Simon Glass5c30bf42014-11-14 18:18:19 -0700263 echo '.balign 16'; \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900264 echo '.global __dtb_$(*F)_begin'; \
265 echo '__dtb_$(*F)_begin:'; \
266 echo '.incbin "$<" '; \
267 echo '__dtb_$(*F)_end:'; \
268 echo '.global __dtb_$(*F)_end'; \
Simon Glass5c30bf42014-11-14 18:18:19 -0700269 echo '.balign 16'; \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900270) > $@
271
272$(obj)/%.dtb.S: $(obj)/%.dtb
273 $(call cmd,dt_S_dtb)
274
275quiet_cmd_dtc = DTC $@
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900276# Modified for U-Boot
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900277cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
Pavel Machekc4aaf2e2015-04-06 15:46:44 +0200278 $(DTC) -O dtb -o $@ -b 0 \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900279 -i $(dir $<) $(DTC_FLAGS) \
280 -d $(depfile).dtc.tmp $(dtc-tmp) ; \
281 cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
282
283$(obj)/%.dtb: $(src)/%.dts FORCE
284 $(call if_changed_dep,dtc)
285
286dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
287
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900288# Helper targets for Installing DTBs into the boot directory
289quiet_cmd_dtb_install = INSTALL $<
290 cmd_dtb_install = cp $< $(2)
291
292_dtbinst_pre_:
293 $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi
294 $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi
295 $(Q)mkdir -p $(INSTALL_DTBS_PATH)
296
297%.dtb_dtbinst_: $(obj)/%.dtb _dtbinst_pre_
298 $(call cmd,dtb_install,$(INSTALL_DTBS_PATH))
299
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900300# Bzip2
301# ---------------------------------------------------------------------------
302
303# Bzip2 and LZMA do not include size in file... so we have to fake that;
304# append the size as a 32-bit littleendian number as gzip does.
305size_append = printf $(shell \
306dec_size=0; \
307for F in $1; do \
308 fsize=$$(stat -c "%s" $$F); \
309 dec_size=$$(expr $$dec_size + $$fsize); \
310done; \
311printf "%08x\n" $$dec_size | \
312 sed 's/\(..\)/\1 /g' | { \
313 read ch0 ch1 ch2 ch3; \
314 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
315 printf '%s%03o' '\\' $$((0x$$ch)); \
316 done; \
317 } \
318)
319
320quiet_cmd_bzip2 = BZIP2 $@
321cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
322 bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
323 (rm -f $@ ; false)
324
325# Lzma
326# ---------------------------------------------------------------------------
327
328quiet_cmd_lzma = LZMA $@
329cmd_lzma = (cat $(filter-out FORCE,$^) | \
330 lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
331 (rm -f $@ ; false)
332
333quiet_cmd_lzo = LZO $@
334cmd_lzo = (cat $(filter-out FORCE,$^) | \
335 lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
336 (rm -f $@ ; false)
337
338quiet_cmd_lz4 = LZ4 $@
339cmd_lz4 = (cat $(filter-out FORCE,$^) | \
340 lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
341 (rm -f $@ ; false)
342
343# U-Boot mkimage
344# ---------------------------------------------------------------------------
345
346MKIMAGE := $(srctree)/scripts/mkuboot.sh
347
348# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
349# the number of overrides in arch makefiles
350UIMAGE_ARCH ?= $(SRCARCH)
351UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
352UIMAGE_OPTS-y ?=
353UIMAGE_TYPE ?= kernel
354UIMAGE_LOADADDR ?= arch_must_set_this
355UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
356UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
357UIMAGE_IN ?= $<
358UIMAGE_OUT ?= $@
359
360quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
361 cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
362 -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
363 -T $(UIMAGE_TYPE) \
364 -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
365 -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
366
367# XZ
368# ---------------------------------------------------------------------------
369# Use xzkern to compress the kernel image and xzmisc to compress other things.
370#
371# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
372# of the kernel decompressor. A BCJ filter is used if it is available for
373# the target architecture. xzkern also appends uncompressed size of the data
374# using size_append. The .xz format has the size information available at
375# the end of the file too, but it's in more complex format and it's good to
376# avoid changing the part of the boot code that reads the uncompressed size.
377# Note that the bytes added by size_append will make the xz tool think that
378# the file is corrupt. This is expected.
379#
380# xzmisc doesn't use size_append, so it can be used to create normal .xz
381# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
382# big dictionary would increase the memory usage too much in the multi-call
383# decompression mode. A BCJ filter isn't used either.
384quiet_cmd_xzkern = XZKERN $@
385cmd_xzkern = (cat $(filter-out FORCE,$^) | \
386 sh $(srctree)/scripts/xz_wrap.sh && \
387 $(call size_append, $(filter-out FORCE,$^))) > $@ || \
388 (rm -f $@ ; false)
389
390quiet_cmd_xzmisc = XZMISC $@
391cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
392 xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
393 (rm -f $@ ; false)
Masahiro Yamadaba8dd772014-06-04 10:12:21 +0900394
395# Additional commands for U-Boot
396#
397# mkimage
398# ---------------------------------------------------------------------------
399quiet_cmd_mkimage = MKIMAGE $@
400cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
401 $(if $(KBUILD_VERBOSE:1=), >/dev/null)