Ariel D'Alessandro | c4c1ed6 | 2021-11-23 13:33:30 -0300 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright 2019-2020 Variscite Ltd. |
| 4 | * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | |
| 9 | #include "imx8mn-var-som.dtsi" |
| 10 | |
| 11 | / { |
| 12 | model = "Variscite VAR-SOM-MX8MN Symphony evaluation board"; |
| 13 | compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn"; |
| 14 | |
| 15 | reg_usdhc2_vmmc: regulator-usdhc2-vmmc { |
| 16 | compatible = "regulator-fixed"; |
| 17 | pinctrl-names = "default"; |
| 18 | pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| 19 | regulator-name = "VSD_3V3"; |
| 20 | regulator-min-microvolt = <3300000>; |
| 21 | regulator-max-microvolt = <3300000>; |
| 22 | gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; |
| 23 | enable-active-high; |
| 24 | }; |
| 25 | |
| 26 | gpio-keys { |
| 27 | compatible = "gpio-keys"; |
| 28 | |
| 29 | back { |
| 30 | label = "Back"; |
| 31 | gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; |
| 32 | linux,code = <KEY_BACK>; |
| 33 | }; |
| 34 | |
| 35 | home { |
| 36 | label = "Home"; |
| 37 | gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; |
| 38 | linux,code = <KEY_HOME>; |
| 39 | }; |
| 40 | |
| 41 | menu { |
| 42 | label = "Menu"; |
| 43 | gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; |
| 44 | linux,code = <KEY_MENU>; |
| 45 | }; |
| 46 | }; |
| 47 | |
| 48 | leds { |
| 49 | compatible = "gpio-leds"; |
| 50 | |
| 51 | led { |
| 52 | label = "Heartbeat"; |
| 53 | gpios = <&pca9534 0 GPIO_ACTIVE_LOW>; |
| 54 | linux,default-trigger = "heartbeat"; |
| 55 | }; |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | ðphy { |
| 60 | reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>; |
| 61 | }; |
| 62 | |
| 63 | &i2c2 { |
| 64 | clock-frequency = <400000>; |
| 65 | pinctrl-names = "default"; |
| 66 | pinctrl-0 = <&pinctrl_i2c2>; |
| 67 | status = "okay"; |
| 68 | |
| 69 | pca9534: gpio@20 { |
| 70 | compatible = "nxp,pca9534"; |
| 71 | reg = <0x20>; |
| 72 | gpio-controller; |
| 73 | pinctrl-names = "default"; |
| 74 | pinctrl-0 = <&pinctrl_pca9534>; |
| 75 | interrupt-parent = <&gpio1>; |
| 76 | interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| 77 | #gpio-cells = <2>; |
| 78 | wakeup-source; |
| 79 | |
| 80 | /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */ |
| 81 | usb3-sata-sel-hog { |
| 82 | gpio-hog; |
| 83 | gpios = <4 GPIO_ACTIVE_HIGH>; |
| 84 | output-low; |
| 85 | line-name = "usb3_sata_sel"; |
| 86 | }; |
| 87 | |
| 88 | som-vselect-hog { |
| 89 | gpio-hog; |
| 90 | gpios = <6 GPIO_ACTIVE_HIGH>; |
| 91 | output-low; |
| 92 | line-name = "som_vselect"; |
| 93 | }; |
| 94 | |
| 95 | enet-sel-hog { |
| 96 | gpio-hog; |
| 97 | gpios = <7 GPIO_ACTIVE_HIGH>; |
| 98 | output-low; |
| 99 | line-name = "enet_sel"; |
| 100 | }; |
| 101 | }; |
| 102 | |
| 103 | extcon_usbotg1: typec@3d { |
| 104 | compatible = "nxp,ptn5150"; |
| 105 | reg = <0x3d>; |
| 106 | interrupt-parent = <&gpio1>; |
| 107 | interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
| 108 | pinctrl-names = "default"; |
| 109 | pinctrl-0 = <&pinctrl_ptn5150>; |
| 110 | status = "okay"; |
| 111 | }; |
| 112 | }; |
| 113 | |
| 114 | &i2c3 { |
| 115 | /* Capacitive touch controller */ |
| 116 | ft5x06_ts: touchscreen@38 { |
| 117 | compatible = "edt,edt-ft5406"; |
| 118 | reg = <0x38>; |
| 119 | pinctrl-names = "default"; |
| 120 | pinctrl-0 = <&pinctrl_captouch>; |
| 121 | interrupt-parent = <&gpio5>; |
| 122 | interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; |
| 123 | |
| 124 | touchscreen-size-x = <800>; |
| 125 | touchscreen-size-y = <480>; |
| 126 | touchscreen-inverted-x; |
| 127 | touchscreen-inverted-y; |
| 128 | }; |
| 129 | |
| 130 | rtc@68 { |
| 131 | compatible = "dallas,ds1337"; |
| 132 | reg = <0x68>; |
| 133 | }; |
| 134 | }; |
| 135 | |
| 136 | /* Header */ |
| 137 | &uart1 { |
| 138 | pinctrl-names = "default"; |
| 139 | pinctrl-0 = <&pinctrl_uart1>; |
| 140 | status = "okay"; |
| 141 | }; |
| 142 | |
| 143 | /* Header */ |
| 144 | &uart3 { |
| 145 | pinctrl-names = "default"; |
| 146 | pinctrl-0 = <&pinctrl_uart3>; |
| 147 | status = "okay"; |
| 148 | }; |
| 149 | |
| 150 | &usbotg1 { |
| 151 | disable-over-current; |
| 152 | extcon = <&extcon_usbotg1>, <&extcon_usbotg1>; |
| 153 | }; |
| 154 | |
| 155 | &pinctrl_fec1 { |
| 156 | fsl,pins = < |
| 157 | MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| 158 | MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| 159 | MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| 160 | MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| 161 | MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| 162 | MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| 163 | MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| 164 | MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| 165 | MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| 166 | MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| 167 | MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| 168 | MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| 169 | MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| 170 | MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| 171 | /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ |
| 172 | >; |
| 173 | }; |
| 174 | |
| 175 | &pinctrl_fec1_sleep { |
| 176 | fsl,pins = < |
| 177 | MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120 |
| 178 | MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120 |
| 179 | MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120 |
| 180 | MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120 |
| 181 | MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120 |
| 182 | MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120 |
| 183 | MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120 |
| 184 | MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120 |
| 185 | MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120 |
| 186 | MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120 |
| 187 | MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120 |
| 188 | MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120 |
| 189 | MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120 |
| 190 | MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120 |
| 191 | /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ |
| 192 | >; |
| 193 | }; |
| 194 | |
| 195 | &iomuxc { |
| 196 | pinctrl_captouch: captouchgrp { |
| 197 | fsl,pins = < |
| 198 | MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16 |
| 199 | >; |
| 200 | }; |
| 201 | |
| 202 | pinctrl_i2c2: i2c2grp { |
| 203 | fsl,pins = < |
| 204 | MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 |
| 205 | MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 |
| 206 | >; |
| 207 | }; |
| 208 | |
| 209 | pinctrl_pca9534: pca9534grp { |
| 210 | fsl,pins = < |
| 211 | MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 |
| 212 | >; |
| 213 | }; |
| 214 | |
| 215 | pinctrl_ptn5150: ptn5150grp { |
| 216 | fsl,pins = < |
| 217 | MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 |
| 218 | >; |
| 219 | }; |
| 220 | |
| 221 | pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| 222 | fsl,pins = < |
| 223 | MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x41 |
| 224 | >; |
| 225 | }; |
| 226 | |
| 227 | pinctrl_uart1: uart1grp { |
| 228 | fsl,pins = < |
| 229 | MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 |
| 230 | MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 |
| 231 | >; |
| 232 | }; |
| 233 | |
| 234 | pinctrl_uart3: uart3grp { |
| 235 | fsl,pins = < |
| 236 | MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 |
| 237 | MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 |
| 238 | >; |
| 239 | }; |
| 240 | }; |