blob: 1b4ca295bc8f440188f9bafdf7241776da4b3c9c [file] [log] [blame]
Stefan Roeseb29ca4a2013-04-17 00:32:43 +00001/*
2 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
3 *
4 * Configuration settings for the ProjectionDesign / Barco
5 * Titanium board.
6 *
7 * Based on mx6qsabrelite.h which is:
8 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000011 */
12
13#ifndef __CONFIG_H
14#define __CONFIG_H
15
Eric Nelson02824dc2013-11-26 17:40:30 -070016#include "mx6_common.h"
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000017
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000018#define CONFIG_MX6Q
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000019
20#define MACH_TYPE_TITANIUM 3769
21#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM
22
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000023/* Size of malloc() pool */
24#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
25
26#define CONFIG_BOARD_EARLY_INIT_F
27#define CONFIG_MISC_INIT_R
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000028
29#define CONFIG_MXC_UART
30#define CONFIG_MXC_UART_BASE UART1_BASE
31
32/* I2C Configs */
33#define CONFIG_CMD_I2C
tremb089d032013-09-21 18:13:36 +020034#define CONFIG_SYS_I2C
35#define CONFIG_SYS_I2C_MXC
York Sunf8cb1012015-03-20 10:20:40 -070036#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000037#define CONFIG_SYS_I2C_SPEED 100000
38
39/* MMC Configs */
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000040#define CONFIG_SYS_FSL_ESDHC_ADDR 0
41#define CONFIG_SYS_FSL_USDHC_NUM 1
42
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000043#define CONFIG_CMD_PING
44#define CONFIG_CMD_DHCP
45#define CONFIG_CMD_MII
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000046#define CONFIG_FEC_MXC
47#define CONFIG_MII
48#define IMX_FEC_BASE ENET_BASE_ADDR
49#define CONFIG_FEC_XCV_TYPE RGMII
50#define CONFIG_FEC_MXC_PHYADDR 4
51#define CONFIG_PHYLIB
52#define CONFIG_PHY_MICREL
53#define CONFIG_PHY_MICREL_KSZ9021
54
55/* USB Configs */
56#define CONFIG_CMD_USB
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000057#define CONFIG_USB_EHCI
58#define CONFIG_USB_EHCI_MX6
59#define CONFIG_USB_STORAGE
60#define CONFIG_MXC_USB_PORT 1
61#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
62#define CONFIG_MXC_USB_FLAGS 0
63
64/* Miscellaneous commands */
65#define CONFIG_CMD_BMODE
66
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000067#define CONFIG_SYS_MEMTEST_START 0x10000000
68#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
69
70#define CONFIG_HOSTNAME titanium
71#define CONFIG_UBI_PART ubi
72#define CONFIG_UBIFS_VOLUME rootfs0
73
74#define MTDIDS_DEFAULT "nand0=gpmi-nand"
75#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
76 "512k(env2),-(ubi)"
77
78#define CONFIG_EXTRA_ENV_SETTINGS \
79 "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
80 "kernel_fs=/boot/uImage\0" \
81 "kernel_addr=11000000\0" \
82 "dtb=" __stringify(CONFIG_HOSTNAME) "/" \
83 __stringify(CONFIG_HOSTNAME) ".dtb\0" \
84 "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
85 "dtb_addr=12800000\0" \
86 "script=boot.scr\0" \
87 "uimage=uImage\0" \
88 "console=ttymxc0\0" \
89 "baudrate=115200\0" \
90 "fdt_high=0xffffffff\0" \
91 "initrd_high=0xffffffff\0" \
92 "mmcdev=0\0" \
93 "mmcpart=1\0" \
94 "uimage=uImage\0" \
95 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
96 " ${script}\0" \
97 "bootscript=echo Running bootscript from mmc ...; source\0" \
98 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
99 "mmcroot=/dev/mmcblk0p2\0" \
100 "mmcargs=setenv bootargs console=${console},${baudrate} " \
101 "root=${mmcroot} rootwait rw\0" \
102 "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
103 " ${uimage}; bootm\0" \
104 "addip=setenv bootargs ${bootargs} " \
105 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
106 ":${hostname}:${netdev}:off panic=1\0" \
107 "addcon=setenv bootargs ${bootargs} console=ttymxc0," \
108 "${baudrate}\0" \
109 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
110 "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
111 "nfsargs=setenv bootargs root=/dev/nfs rw " \
112 "nfsroot=${serverip}:${rootpath}\0" \
113 "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
114 "part=" __stringify(CONFIG_UBI_PART) "\0" \
115 "boot_vol=0\0" \
116 "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
117 "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
118 "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
119 " ${filesize}\0" \
120 "upd_ubifs=run load_ubifs update_ubifs\0" \
121 "init_ubi=nand erase.part ubi;ubi part ${part};" \
122 "ubi create ${vol} c800000\0" \
123 "mtdids=" MTDIDS_DEFAULT "\0" \
124 "mtdparts=" MTDPARTS_DEFAULT "\0" \
125 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
126 " addcon addmtd;" \
127 "bootm ${kernel_addr} - ${dtb_addr}\0" \
128 "ubifsargs=set bootargs ubi.mtd=ubi " \
129 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
130 "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
131 "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
132 "ubifsload ${dtb_addr} ${dtb_fs};\0" \
133 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
134 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
135 "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
136 "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
137 "net_nfs=run load_dtb load_kernel; " \
138 "run nfsargs addip addcon addmtd;" \
139 "bootm ${kernel_addr} - ${dtb_addr}\0" \
140 "delenv=env default -a -f; saveenv; reset\0"
141
142#define CONFIG_BOOTCOMMAND "run nand_ubifs"
143
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000144/* Print Buffer Size */
145#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
146 sizeof(CONFIG_SYS_PROMPT) + 16)
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000147
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000148/* Physical Memory Map */
149#define CONFIG_NR_DRAM_BANKS 1
150#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
151#define PHYS_SDRAM_SIZE (512 << 20)
152
153#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
154#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
155#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
156
157#define CONFIG_SYS_INIT_SP_OFFSET \
158 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
159#define CONFIG_SYS_INIT_SP_ADDR \
160 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
161
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000162/* Enable NAND support */
163#define CONFIG_CMD_NAND
164#define CONFIG_CMD_NAND_TRIMFFS
165#define CONFIG_CMD_TIME
166
167#ifdef CONFIG_CMD_NAND
168
169/* NAND stuff */
170#define CONFIG_NAND_MXS
171#define CONFIG_SYS_MAX_NAND_DEVICE 1
172#define CONFIG_SYS_NAND_BASE 0x40000000
173#define CONFIG_SYS_NAND_5_ADDR_CYCLE
174#define CONFIG_SYS_NAND_ONFI_DETECTION
175
176/* DMA stuff, needed for GPMI/MXS NAND support */
177#define CONFIG_APBH_DMA
178#define CONFIG_APBH_DMA_BURST
179#define CONFIG_APBH_DMA_BURST8
180
181/* Environment in NAND */
182#define CONFIG_ENV_IS_IN_NAND
183#define CONFIG_ENV_OFFSET (16 << 20)
184#define CONFIG_ENV_SECT_SIZE (128 << 10)
185#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
186#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
187#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
188
189#else /* CONFIG_CMD_NAND */
190
191/* Environment in MMC */
192#define CONFIG_ENV_SIZE (8 << 10)
193#define CONFIG_ENV_IS_IN_MMC
194#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
195#define CONFIG_SYS_MMC_ENV_DEV 0
196
197#endif /* CONFIG_CMD_NAND */
198
199/* UBI/UBIFS config options */
200#define CONFIG_LZO
201#define CONFIG_MTD_DEVICE
202#define CONFIG_MTD_PARTITIONS
203#define CONFIG_RBTREE
204#define CONFIG_CMD_MTDPARTS
205#define CONFIG_CMD_UBI
206#define CONFIG_CMD_UBIFS
207
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000208#endif /* __CONFIG_H */