blob: e1d93b8333580008ad1f1f4c9d05cf406ea6eb06 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Marek Vasut23faf2b2012-02-13 18:58:17 +00002/*
Marek Vasut23faf2b2012-02-13 18:58:17 +00003 * Most of this source has been derived from the Linux USB
4 * project:
5 * (C) Copyright Linus Torvalds 1999
6 * (C) Copyright Johannes Erdfelt 1999-2001
7 * (C) Copyright Andreas Gal 1999
8 * (C) Copyright Gregory P. Smith 1999
9 * (C) Copyright Deti Fliegl 1999 (new USB architecture)
10 * (C) Copyright Randy Dunlap 2000
11 * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id)
12 * (C) Copyright Yggdrasil Computing, Inc. 2000
13 * (usb_device_id matching changes by Adam J. Richter)
14 *
15 * Adapted for U-Boot:
16 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
Marek Vasut23faf2b2012-02-13 18:58:17 +000017 */
18
19/****************************************************************************
20 * HUB "Driver"
21 * Probes device for being a hub and configurate it
22 */
23
24#include <common.h>
25#include <command.h>
Simon Glass054fe482015-03-25 12:22:10 -060026#include <dm.h>
Simon Glass79b58882015-03-25 12:22:01 -060027#include <errno.h>
Simon Glasscf92e052015-09-02 17:24:58 -060028#include <memalign.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000029#include <asm/processor.h>
Lucas Stach93ad9082012-09-06 08:00:13 +020030#include <asm/unaligned.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000031#include <linux/ctype.h>
Stefan Roesec998da02016-03-15 13:59:15 +010032#include <linux/list.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000033#include <asm/byteorder.h>
Simon Glass3884c982015-11-08 23:47:44 -070034#ifdef CONFIG_SANDBOX
35#include <asm/state.h>
36#endif
Marek Vasut23faf2b2012-02-13 18:58:17 +000037#include <asm/unaligned.h>
Simon Glass054fe482015-03-25 12:22:10 -060038
Marek Vasut23faf2b2012-02-13 18:58:17 +000039#include <usb.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000040
Marek Vasut23faf2b2012-02-13 18:58:17 +000041#define USB_BUFSIZ 512
42
Stefan Roesef7f60102016-03-15 13:59:12 +010043#define HUB_SHORT_RESET_TIME 20
44#define HUB_LONG_RESET_TIME 200
45
Stefan Roesec998da02016-03-15 13:59:15 +010046#define PORT_OVERCURRENT_MAX_SCAN_COUNT 3
47
48struct usb_device_scan {
49 struct usb_device *dev; /* USB hub device to scan */
50 struct usb_hub_device *hub; /* USB hub struct */
51 int port; /* USB port to scan */
52 struct list_head list;
53};
54
Stefan Roesec998da02016-03-15 13:59:15 +010055static LIST_HEAD(usb_scan_list);
Marek Vasut23faf2b2012-02-13 18:58:17 +000056
Philipp Tomsich883946e2017-11-22 17:15:17 +010057__weak void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
Dan Murphy3615a992013-08-01 14:06:01 -050058{
59 return;
60}
Marek Vasut23faf2b2012-02-13 18:58:17 +000061
Bin Mengf3421192017-07-19 21:49:58 +080062static inline bool usb_hub_is_superspeed(struct usb_device *hdev)
63{
64 return hdev->descriptor.bDeviceProtocol == 3;
65}
66
Bin Meng46c1d492017-07-19 21:51:11 +080067#ifdef CONFIG_DM_USB
68bool usb_hub_is_root_hub(struct udevice *hub)
69{
70 if (device_get_uclass_id(hub->parent) != UCLASS_USB_HUB)
71 return true;
72
73 return false;
74}
Bin Mengbbc6f062017-07-19 21:51:13 +080075
76static int usb_set_hub_depth(struct usb_device *dev, int depth)
77{
78 if (depth < 0 || depth > 4)
79 return -EINVAL;
80
81 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
82 USB_REQ_SET_HUB_DEPTH, USB_DIR_OUT | USB_RT_HUB,
83 depth, 0, NULL, 0, USB_CNTL_TIMEOUT);
84}
Bin Meng46c1d492017-07-19 21:51:11 +080085#endif
86
Marek Vasut23faf2b2012-02-13 18:58:17 +000087static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
88{
Bin Mengf3421192017-07-19 21:49:58 +080089 unsigned short dtype = USB_DT_HUB;
90
91 if (usb_hub_is_superspeed(dev))
92 dtype = USB_DT_SS_HUB;
93
Marek Vasut23faf2b2012-02-13 18:58:17 +000094 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
95 USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
Bin Mengf3421192017-07-19 21:49:58 +080096 dtype << 8, 0, data, size, USB_CNTL_TIMEOUT);
Marek Vasut23faf2b2012-02-13 18:58:17 +000097}
98
99static int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
100{
101 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
102 USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature,
103 port, NULL, 0, USB_CNTL_TIMEOUT);
104}
105
106static int usb_set_port_feature(struct usb_device *dev, int port, int feature)
107{
108 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
109 USB_REQ_SET_FEATURE, USB_RT_PORT, feature,
110 port, NULL, 0, USB_CNTL_TIMEOUT);
111}
112
113static int usb_get_hub_status(struct usb_device *dev, void *data)
114{
115 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
116 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
117 data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
118}
119
Vincent Palatin08f3bb02015-05-04 11:30:54 -0600120int usb_get_port_status(struct usb_device *dev, int port, void *data)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000121{
Bin Meng74ffc7c2017-07-19 21:51:12 +0800122 int ret;
123
124 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
Marek Vasut23faf2b2012-02-13 18:58:17 +0000125 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
Bin Meng53771a42017-07-19 21:49:59 +0800126 data, sizeof(struct usb_port_status), USB_CNTL_TIMEOUT);
Bin Meng74ffc7c2017-07-19 21:51:12 +0800127
128#ifdef CONFIG_DM_USB
129 if (ret < 0)
130 return ret;
131
132 /*
133 * Translate the USB 3.0 hub port status field into the old version
134 * that U-Boot understands. Do this only when the hub is not root hub.
135 * For root hub, the port status field has already been translated
136 * in the host controller driver (see xhci_submit_root() in xhci.c).
137 *
138 * Note: this only supports driver model.
139 */
140
141 if (!usb_hub_is_root_hub(dev->dev) && usb_hub_is_superspeed(dev)) {
142 struct usb_port_status *status = (struct usb_port_status *)data;
143 u16 tmp = (status->wPortStatus) & USB_SS_PORT_STAT_MASK;
144
145 if (status->wPortStatus & USB_SS_PORT_STAT_POWER)
146 tmp |= USB_PORT_STAT_POWER;
147 if ((status->wPortStatus & USB_SS_PORT_STAT_SPEED) ==
148 USB_SS_PORT_STAT_SPEED_5GBPS)
149 tmp |= USB_PORT_STAT_SUPER_SPEED;
150
151 status->wPortStatus = tmp;
152 }
153#endif
154
155 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000156}
157
158
159static void usb_hub_power_on(struct usb_hub_device *hub)
160{
161 int i;
162 struct usb_device *dev;
Wolfgang Grandeggera1a28c62011-12-21 00:01:09 +0000163 unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2;
Tim Harvey319418c2015-04-08 12:21:12 -0700164 const char *env;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000165
166 dev = hub->pusb_dev;
Vivek Gautam0bf796f2013-04-24 02:50:11 +0000167
Vivek Gautamceb49722013-04-12 16:34:33 +0530168 debug("enabling power on all ports\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000169 for (i = 0; i < dev->maxchild; i++) {
170 usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
Vivek Gautamceb49722013-04-12 16:34:33 +0530171 debug("port %d returns %lX\n", i + 1, dev->status);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000172 }
Wolfgang Grandeggera1a28c62011-12-21 00:01:09 +0000173
Stefan Roesec998da02016-03-15 13:59:15 +0100174#ifdef CONFIG_SANDBOX
175 /*
176 * Don't set timeout / delay values here. This results
177 * in these values still being reset to 0.
178 */
179 if (state_get_skip_delays())
180 return;
181#endif
182
Stephen Warren0d437bc2014-05-19 14:21:17 -0600183 /*
184 * Wait for power to become stable,
185 * plus spec-defined max time for device to connect
Tim Harvey319418c2015-04-08 12:21:12 -0700186 * but allow this time to be increased via env variable as some
187 * devices break the spec and require longer warm-up times
Stephen Warren0d437bc2014-05-19 14:21:17 -0600188 */
Simon Glass00caae62017-08-03 12:22:12 -0600189 env = env_get("usb_pgood_delay");
Tim Harvey319418c2015-04-08 12:21:12 -0700190 if (env)
191 pgood_delay = max(pgood_delay,
192 (unsigned)simple_strtol(env, NULL, 0));
193 debug("pgood_delay=%dms\n", pgood_delay);
Stefan Roesec998da02016-03-15 13:59:15 +0100194
195 /*
196 * Do a minimum delay of the larger value of 100ms or pgood_delay
197 * so that the power can stablize before the devices are queried
198 */
199 hub->query_delay = get_timer(0) + max(100, (int)pgood_delay);
200
201 /*
202 * Record the power-on timeout here. The max. delay (timeout)
203 * will be done based on this value in the USB port loop in
204 * usb_hub_configure() later.
205 */
206 hub->connect_timeout = hub->query_delay + 1000;
207 debug("devnum=%d poweron: query_delay=%d connect_timeout=%d\n",
208 dev->devnum, max(100, (int)pgood_delay),
209 max(100, (int)pgood_delay) + 1000);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000210}
211
Bin Mengdfa96e02017-07-19 21:51:09 +0800212#ifndef CONFIG_DM_USB
213static struct usb_hub_device hub_dev[USB_MAX_HUB];
214static int usb_hub_index;
215
Marek Vasut23faf2b2012-02-13 18:58:17 +0000216void usb_hub_reset(void)
217{
218 usb_hub_index = 0;
Stefan Roesec998da02016-03-15 13:59:15 +0100219
220 /* Zero out global hub_dev in case its re-used again */
221 memset(hub_dev, 0, sizeof(hub_dev));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000222}
223
224static struct usb_hub_device *usb_hub_allocate(void)
225{
226 if (usb_hub_index < USB_MAX_HUB)
227 return &hub_dev[usb_hub_index++];
228
229 printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB);
230 return NULL;
231}
Bin Mengdfa96e02017-07-19 21:51:09 +0800232#endif
Marek Vasut23faf2b2012-02-13 18:58:17 +0000233
234#define MAX_TRIES 5
235
236static inline char *portspeed(int portstatus)
237{
Vivek Gautam55f4b572013-04-24 02:50:12 +0000238 char *speed_str;
239
240 switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
241 case USB_PORT_STAT_SUPER_SPEED:
242 speed_str = "5 Gb/s";
243 break;
244 case USB_PORT_STAT_HIGH_SPEED:
245 speed_str = "480 Mb/s";
246 break;
247 case USB_PORT_STAT_LOW_SPEED:
248 speed_str = "1.5 Mb/s";
249 break;
250 default:
251 speed_str = "12 Mb/s";
252 break;
253 }
254
255 return speed_str;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000256}
257
Bin Menga199a722017-07-19 21:51:10 +0800258/**
259 * usb_hub_port_reset() - reset a port given its usb_device pointer
260 *
261 * Reset a hub port and see if a device is present on that port, providing
262 * sufficient time for it to show itself. The port status is returned.
263 *
264 * @dev: USB device to reset
265 * @port: Port number to reset (note ports are numbered from 0 here)
266 * @portstat: Returns port status
267 */
268static int usb_hub_port_reset(struct usb_device *dev, int port,
269 unsigned short *portstat)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000270{
Hans de Goedead84a422015-05-10 14:10:15 +0200271 int err, tries;
Puneet Saxenaf5766132012-04-03 14:56:06 +0530272 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000273 unsigned short portstatus, portchange;
Stefan Roesef7f60102016-03-15 13:59:12 +0100274 int delay = HUB_SHORT_RESET_TIME; /* start with short reset delay */
Marek Vasut23faf2b2012-02-13 18:58:17 +0000275
Simon Glass054fe482015-03-25 12:22:10 -0600276#ifdef CONFIG_DM_USB
277 debug("%s: resetting '%s' port %d...\n", __func__, dev->dev->name,
278 port + 1);
279#else
280 debug("%s: resetting port %d...\n", __func__, port + 1);
281#endif
Marek Vasut23faf2b2012-02-13 18:58:17 +0000282 for (tries = 0; tries < MAX_TRIES; tries++) {
Hans de Goedead84a422015-05-10 14:10:15 +0200283 err = usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
284 if (err < 0)
285 return err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000286
Stefan Roesef7f60102016-03-15 13:59:12 +0100287 mdelay(delay);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000288
Puneet Saxenaf5766132012-04-03 14:56:06 +0530289 if (usb_get_port_status(dev, port + 1, portsts) < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530290 debug("get_port_status failed status %lX\n",
291 dev->status);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000292 return -1;
293 }
Puneet Saxenaf5766132012-04-03 14:56:06 +0530294 portstatus = le16_to_cpu(portsts->wPortStatus);
295 portchange = le16_to_cpu(portsts->wPortChange);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000296
Vivek Gautamceb49722013-04-12 16:34:33 +0530297 debug("portstatus %x, change %x, %s\n", portstatus, portchange,
298 portspeed(portstatus));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000299
Vivek Gautamceb49722013-04-12 16:34:33 +0530300 debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
301 " USB_PORT_STAT_ENABLE %d\n",
302 (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
303 (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
304 (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000305
Stephen Warren74c0d752014-08-07 17:07:59 -0600306 /*
307 * Perhaps we should check for the following here:
308 * - C_CONNECTION hasn't been set.
309 * - CONNECTION is still set.
310 *
311 * Doing so would ensure that the device is still connected
312 * to the bus, and hasn't been unplugged or replaced while the
313 * USB bus reset was going on.
314 *
315 * However, if we do that, then (at least) a San Disk Ultra
316 * USB 3.0 16GB device fails to reset on (at least) an NVIDIA
317 * Tegra Jetson TK1 board. For some reason, the device appears
318 * to briefly drop off the bus when this second bus reset is
319 * executed, yet if we retry this loop, it'll eventually come
320 * back after another reset or two.
321 */
Marek Vasut23faf2b2012-02-13 18:58:17 +0000322
323 if (portstatus & USB_PORT_STAT_ENABLE)
324 break;
325
Stefan Roesef7f60102016-03-15 13:59:12 +0100326 /* Switch to long reset delay for the next round */
327 delay = HUB_LONG_RESET_TIME;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000328 }
329
330 if (tries == MAX_TRIES) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530331 debug("Cannot enable port %i after %i retries, " \
332 "disabling port.\n", port + 1, MAX_TRIES);
333 debug("Maybe the USB cable is bad?\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000334 return -1;
335 }
336
337 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
338 *portstat = portstatus;
339 return 0;
340}
341
Simon Glass79b58882015-03-25 12:22:01 -0600342int usb_hub_port_connect_change(struct usb_device *dev, int port)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000343{
Puneet Saxenaf5766132012-04-03 14:56:06 +0530344 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000345 unsigned short portstatus;
Simon Glass79b58882015-03-25 12:22:01 -0600346 int ret, speed;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000347
348 /* Check status */
Simon Glass79b58882015-03-25 12:22:01 -0600349 ret = usb_get_port_status(dev, port + 1, portsts);
350 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530351 debug("get_port_status failed\n");
Simon Glass79b58882015-03-25 12:22:01 -0600352 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000353 }
354
Puneet Saxenaf5766132012-04-03 14:56:06 +0530355 portstatus = le16_to_cpu(portsts->wPortStatus);
Vivek Gautamceb49722013-04-12 16:34:33 +0530356 debug("portstatus %x, change %x, %s\n",
357 portstatus,
358 le16_to_cpu(portsts->wPortChange),
359 portspeed(portstatus));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000360
361 /* Clear the connection change status */
362 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
363
364 /* Disconnect any existing devices under this port */
365 if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
Simon Glass054fe482015-03-25 12:22:10 -0600366 (!(portstatus & USB_PORT_STAT_ENABLE))) ||
367 usb_device_has_child_on_port(dev, port)) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530368 debug("usb_disconnect(&hub->children[port]);\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000369 /* Return now if nothing is connected */
370 if (!(portstatus & USB_PORT_STAT_CONNECTION))
Simon Glass79b58882015-03-25 12:22:01 -0600371 return -ENOTCONN;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000372 }
Marek Vasut23faf2b2012-02-13 18:58:17 +0000373
374 /* Reset the port */
Bin Menga199a722017-07-19 21:51:10 +0800375 ret = usb_hub_port_reset(dev, port, &portstatus);
Simon Glass79b58882015-03-25 12:22:01 -0600376 if (ret < 0) {
Hans de Goede45b9ea12015-05-10 14:10:16 +0200377 if (ret != -ENXIO)
378 printf("cannot reset port %i!?\n", port + 1);
Simon Glass79b58882015-03-25 12:22:01 -0600379 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000380 }
381
Vivek Gautam55f4b572013-04-24 02:50:12 +0000382 switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
383 case USB_PORT_STAT_SUPER_SPEED:
Simon Glass79b58882015-03-25 12:22:01 -0600384 speed = USB_SPEED_SUPER;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000385 break;
386 case USB_PORT_STAT_HIGH_SPEED:
Simon Glass79b58882015-03-25 12:22:01 -0600387 speed = USB_SPEED_HIGH;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000388 break;
389 case USB_PORT_STAT_LOW_SPEED:
Simon Glass79b58882015-03-25 12:22:01 -0600390 speed = USB_SPEED_LOW;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000391 break;
392 default:
Simon Glass79b58882015-03-25 12:22:01 -0600393 speed = USB_SPEED_FULL;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000394 break;
395 }
Marek Vasut23faf2b2012-02-13 18:58:17 +0000396
Simon Glass054fe482015-03-25 12:22:10 -0600397#ifdef CONFIG_DM_USB
398 struct udevice *child;
399
400 ret = usb_scan_device(dev->dev, port + 1, speed, &child);
401#else
402 struct usb_device *usb;
403
Simon Glass79b58882015-03-25 12:22:01 -0600404 ret = usb_alloc_new_device(dev->controller, &usb);
405 if (ret) {
406 printf("cannot create new device: ret=%d", ret);
407 return ret;
408 }
409
Marek Vasut23faf2b2012-02-13 18:58:17 +0000410 dev->children[port] = usb;
Simon Glass79b58882015-03-25 12:22:01 -0600411 usb->speed = speed;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000412 usb->parent = dev;
413 usb->portnr = port + 1;
414 /* Run it through the hoops (find a driver, etc) */
Simon Glass79b58882015-03-25 12:22:01 -0600415 ret = usb_new_device(usb);
416 if (ret < 0) {
Marek Vasut23faf2b2012-02-13 18:58:17 +0000417 /* Woops, disable the port */
Simon Glass79b58882015-03-25 12:22:01 -0600418 usb_free_device(dev->controller);
Milind Choudhary359439d2012-12-12 17:55:28 -0800419 dev->children[port] = NULL;
Simon Glass054fe482015-03-25 12:22:10 -0600420 }
421#endif
422 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530423 debug("hub: disabling port %d\n", port + 1);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000424 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
425 }
Simon Glass79b58882015-03-25 12:22:01 -0600426
427 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000428}
429
Stefan Roesec998da02016-03-15 13:59:15 +0100430static int usb_scan_port(struct usb_device_scan *usb_scan)
431{
432 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
433 unsigned short portstatus;
434 unsigned short portchange;
435 struct usb_device *dev;
436 struct usb_hub_device *hub;
437 int ret = 0;
438 int i;
439
440 dev = usb_scan->dev;
441 hub = usb_scan->hub;
442 i = usb_scan->port;
443
444 /*
445 * Don't talk to the device before the query delay is expired.
446 * This is needed for voltages to stabalize.
447 */
448 if (get_timer(0) < hub->query_delay)
449 return 0;
450
451 ret = usb_get_port_status(dev, i + 1, portsts);
452 if (ret < 0) {
453 debug("get_port_status failed\n");
454 if (get_timer(0) >= hub->connect_timeout) {
455 debug("devnum=%d port=%d: timeout\n",
456 dev->devnum, i + 1);
457 /* Remove this device from scanning list */
458 list_del(&usb_scan->list);
459 free(usb_scan);
460 return 0;
461 }
Marek Vasutd81db482016-05-03 22:22:59 +0200462 return 0;
Stefan Roesec998da02016-03-15 13:59:15 +0100463 }
464
465 portstatus = le16_to_cpu(portsts->wPortStatus);
466 portchange = le16_to_cpu(portsts->wPortChange);
467 debug("Port %d Status %X Change %X\n", i + 1, portstatus, portchange);
468
Bin Mengf7a9e5d2017-07-19 21:49:57 +0800469 /*
470 * No connection change happened, wait a bit more.
471 *
472 * For some situation, the hub reports no connection change but a
473 * device is connected to the port (eg: CCS bit is set but CSC is not
474 * in the PORTSC register of a root hub), ignore such case.
475 */
476 if (!(portchange & USB_PORT_STAT_C_CONNECTION) &&
477 !(portstatus & USB_PORT_STAT_CONNECTION)) {
Stefan Roesec998da02016-03-15 13:59:15 +0100478 if (get_timer(0) >= hub->connect_timeout) {
479 debug("devnum=%d port=%d: timeout\n",
480 dev->devnum, i + 1);
481 /* Remove this device from scanning list */
482 list_del(&usb_scan->list);
483 free(usb_scan);
484 return 0;
485 }
486 return 0;
487 }
488
Bin Mengb9020352017-09-18 06:40:45 -0700489 if (portchange & USB_PORT_STAT_C_RESET) {
490 debug("port %d reset change\n", i + 1);
491 usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET);
492 }
493
Bin Meng061895f2017-09-18 06:40:46 -0700494 if ((portchange & USB_SS_PORT_STAT_C_BH_RESET) &&
495 usb_hub_is_superspeed(dev)) {
496 debug("port %d BH reset change\n", i + 1);
497 usb_clear_port_feature(dev, i + 1, USB_SS_PORT_FEAT_C_BH_RESET);
498 }
499
Stefan Roesec998da02016-03-15 13:59:15 +0100500 /* A new USB device is ready at this point */
501 debug("devnum=%d port=%d: USB dev found\n", dev->devnum, i + 1);
502
503 usb_hub_port_connect_change(dev, i);
504
505 if (portchange & USB_PORT_STAT_C_ENABLE) {
506 debug("port %d enable change, status %x\n", i + 1, portstatus);
507 usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE);
508 /*
509 * The following hack causes a ghost device problem
510 * to Faraday EHCI
511 */
512#ifndef CONFIG_USB_EHCI_FARADAY
513 /*
514 * EM interference sometimes causes bad shielded USB
515 * devices to be shutdown by the hub, this hack enables
516 * them again. Works at least with mouse driver
517 */
518 if (!(portstatus & USB_PORT_STAT_ENABLE) &&
519 (portstatus & USB_PORT_STAT_CONNECTION) &&
520 usb_device_has_child_on_port(dev, i)) {
521 debug("already running port %i disabled by hub (EMI?), re-enabling...\n",
522 i + 1);
523 usb_hub_port_connect_change(dev, i);
524 }
525#endif
526 }
527
528 if (portstatus & USB_PORT_STAT_SUSPEND) {
529 debug("port %d suspend change\n", i + 1);
530 usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_SUSPEND);
531 }
532
533 if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
534 debug("port %d over-current change\n", i + 1);
535 usb_clear_port_feature(dev, i + 1,
536 USB_PORT_FEAT_C_OVER_CURRENT);
537 /* Only power-on this one port */
538 usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
539 hub->overcurrent_count[i]++;
540
541 /*
542 * If the max-scan-count is not reached, return without removing
543 * the device from scan-list. This will re-issue a new scan.
544 */
545 if (hub->overcurrent_count[i] <=
546 PORT_OVERCURRENT_MAX_SCAN_COUNT)
547 return 0;
548
549 /* Otherwise the device will get removed */
Vagrant Cascadianeae4b2b2016-04-30 19:18:00 -0700550 printf("Port %d over-current occurred %d times\n", i + 1,
Stefan Roesec998da02016-03-15 13:59:15 +0100551 hub->overcurrent_count[i]);
552 }
553
Stefan Roesec998da02016-03-15 13:59:15 +0100554 /*
555 * We're done with this device, so let's remove this device from
556 * scanning list
557 */
558 list_del(&usb_scan->list);
559 free(usb_scan);
560
561 return 0;
562}
563
564static int usb_device_list_scan(void)
565{
566 struct usb_device_scan *usb_scan;
567 struct usb_device_scan *tmp;
568 static int running;
569 int ret = 0;
570
571 /* Only run this loop once for each controller */
572 if (running)
573 return 0;
574
575 running = 1;
576
577 while (1) {
578 /* We're done, once the list is empty again */
579 if (list_empty(&usb_scan_list))
580 goto out;
581
582 list_for_each_entry_safe(usb_scan, tmp, &usb_scan_list, list) {
583 int ret;
584
585 /* Scan this port */
586 ret = usb_scan_port(usb_scan);
587 if (ret)
588 goto out;
589 }
590 }
591
592out:
593 /*
594 * This USB controller has finished scanning all its connected
595 * USB devices. Set "running" back to 0, so that other USB controllers
596 * will scan their devices too.
597 */
598 running = 0;
599
600 return ret;
601}
Marek Vasut23faf2b2012-02-13 18:58:17 +0000602
Bin Mengdfa96e02017-07-19 21:51:09 +0800603static struct usb_hub_device *usb_get_hub_device(struct usb_device *dev)
604{
605 struct usb_hub_device *hub;
606
607#ifndef CONFIG_DM_USB
608 /* "allocate" Hub device */
609 hub = usb_hub_allocate();
610#else
611 hub = dev_get_uclass_priv(dev->dev);
612#endif
613
614 return hub;
615}
616
Marek Vasut23faf2b2012-02-13 18:58:17 +0000617static int usb_hub_configure(struct usb_device *dev)
618{
Julius Wernereaf3e612013-07-19 13:12:08 -0700619 int i, length;
Puneet Saxenaf5766132012-04-03 14:56:06 +0530620 ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
621 unsigned char *bitmap;
Lucas Stach93ad9082012-09-06 08:00:13 +0200622 short hubCharacteristics;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000623 struct usb_hub_descriptor *descriptor;
624 struct usb_hub_device *hub;
Simon Glass0ad04582017-12-04 13:48:22 -0700625 struct usb_hub_status *hubsts;
Simon Glass361ad6a2015-03-25 12:22:09 -0600626 int ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000627
Bin Mengdfa96e02017-07-19 21:51:09 +0800628 hub = usb_get_hub_device(dev);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000629 if (hub == NULL)
Simon Glass361ad6a2015-03-25 12:22:09 -0600630 return -ENOMEM;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000631 hub->pusb_dev = dev;
Bin Mengdfa96e02017-07-19 21:51:09 +0800632
Marek Vasut23faf2b2012-02-13 18:58:17 +0000633 /* Get the the hub descriptor */
Simon Glass361ad6a2015-03-25 12:22:09 -0600634 ret = usb_get_hub_descriptor(dev, buffer, 4);
635 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530636 debug("usb_hub_configure: failed to get hub " \
637 "descriptor, giving up %lX\n", dev->status);
Simon Glass361ad6a2015-03-25 12:22:09 -0600638 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000639 }
640 descriptor = (struct usb_hub_descriptor *)buffer;
641
Masahiro Yamadab4141192014-11-07 03:03:31 +0900642 length = min_t(int, descriptor->bLength,
643 sizeof(struct usb_hub_descriptor));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000644
Simon Glass361ad6a2015-03-25 12:22:09 -0600645 ret = usb_get_hub_descriptor(dev, buffer, length);
646 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530647 debug("usb_hub_configure: failed to get hub " \
648 "descriptor 2nd giving up %lX\n", dev->status);
Simon Glass361ad6a2015-03-25 12:22:09 -0600649 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000650 }
Julius Wernereaf3e612013-07-19 13:12:08 -0700651 memcpy((unsigned char *)&hub->desc, buffer, length);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000652 /* adjust 16bit values */
Lucas Stach93ad9082012-09-06 08:00:13 +0200653 put_unaligned(le16_to_cpu(get_unaligned(
654 &descriptor->wHubCharacteristics)),
655 &hub->desc.wHubCharacteristics);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000656 /* set the bitmap */
Bin Meng337fc7e2017-07-19 21:50:00 +0800657 bitmap = (unsigned char *)&hub->desc.u.hs.DeviceRemovable[0];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000658 /* devices not removable by default */
659 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8);
Bin Meng337fc7e2017-07-19 21:50:00 +0800660 bitmap = (unsigned char *)&hub->desc.u.hs.PortPowerCtrlMask[0];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000661 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
662
663 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
Bin Meng337fc7e2017-07-19 21:50:00 +0800664 hub->desc.u.hs.DeviceRemovable[i] =
665 descriptor->u.hs.DeviceRemovable[i];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000666
667 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
Bin Meng337fc7e2017-07-19 21:50:00 +0800668 hub->desc.u.hs.PortPowerCtrlMask[i] =
669 descriptor->u.hs.PortPowerCtrlMask[i];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000670
671 dev->maxchild = descriptor->bNbrPorts;
Vivek Gautamceb49722013-04-12 16:34:33 +0530672 debug("%d ports detected\n", dev->maxchild);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000673
Lucas Stach93ad9082012-09-06 08:00:13 +0200674 hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
675 switch (hubCharacteristics & HUB_CHAR_LPSM) {
Marek Vasut23faf2b2012-02-13 18:58:17 +0000676 case 0x00:
Vivek Gautamceb49722013-04-12 16:34:33 +0530677 debug("ganged power switching\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000678 break;
679 case 0x01:
Vivek Gautamceb49722013-04-12 16:34:33 +0530680 debug("individual port power switching\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000681 break;
682 case 0x02:
683 case 0x03:
Vivek Gautamceb49722013-04-12 16:34:33 +0530684 debug("unknown reserved power switching mode\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000685 break;
686 }
687
Lucas Stach93ad9082012-09-06 08:00:13 +0200688 if (hubCharacteristics & HUB_CHAR_COMPOUND)
Vivek Gautamceb49722013-04-12 16:34:33 +0530689 debug("part of a compound device\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000690 else
Vivek Gautamceb49722013-04-12 16:34:33 +0530691 debug("standalone hub\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000692
Lucas Stach93ad9082012-09-06 08:00:13 +0200693 switch (hubCharacteristics & HUB_CHAR_OCPM) {
Marek Vasut23faf2b2012-02-13 18:58:17 +0000694 case 0x00:
Vivek Gautamceb49722013-04-12 16:34:33 +0530695 debug("global over-current protection\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000696 break;
697 case 0x08:
Vivek Gautamceb49722013-04-12 16:34:33 +0530698 debug("individual port over-current protection\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000699 break;
700 case 0x10:
701 case 0x18:
Vivek Gautamceb49722013-04-12 16:34:33 +0530702 debug("no over-current protection\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000703 break;
704 }
705
Bin Meng5624dfd2017-07-19 21:51:16 +0800706 switch (dev->descriptor.bDeviceProtocol) {
707 case USB_HUB_PR_FS:
708 break;
709 case USB_HUB_PR_HS_SINGLE_TT:
710 debug("Single TT\n");
711 break;
712 case USB_HUB_PR_HS_MULTI_TT:
713 ret = usb_set_interface(dev, 0, 1);
714 if (ret == 0) {
715 debug("TT per port\n");
716 hub->tt.multi = true;
717 } else {
718 debug("Using single TT (err %d)\n", ret);
719 }
720 break;
721 case USB_HUB_PR_SS:
722 /* USB 3.0 hubs don't have a TT */
723 break;
724 default:
725 debug("Unrecognized hub protocol %d\n",
726 dev->descriptor.bDeviceProtocol);
727 break;
728 }
729
730 /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
731 switch (hubCharacteristics & HUB_CHAR_TTTT) {
732 case HUB_TTTT_8_BITS:
733 if (dev->descriptor.bDeviceProtocol != 0) {
734 hub->tt.think_time = 666;
735 debug("TT requires at most %d FS bit times (%d ns)\n",
736 8, hub->tt.think_time);
737 }
738 break;
739 case HUB_TTTT_16_BITS:
740 hub->tt.think_time = 666 * 2;
741 debug("TT requires at most %d FS bit times (%d ns)\n",
742 16, hub->tt.think_time);
743 break;
744 case HUB_TTTT_24_BITS:
745 hub->tt.think_time = 666 * 3;
746 debug("TT requires at most %d FS bit times (%d ns)\n",
747 24, hub->tt.think_time);
748 break;
749 case HUB_TTTT_32_BITS:
750 hub->tt.think_time = 666 * 4;
751 debug("TT requires at most %d FS bit times (%d ns)\n",
752 32, hub->tt.think_time);
753 break;
754 }
755
Vivek Gautamceb49722013-04-12 16:34:33 +0530756 debug("power on to power good time: %dms\n",
757 descriptor->bPwrOn2PwrGood * 2);
758 debug("hub controller current requirement: %dmA\n",
759 descriptor->bHubContrCurrent);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000760
761 for (i = 0; i < dev->maxchild; i++)
Vivek Gautamceb49722013-04-12 16:34:33 +0530762 debug("port %d is%s removable\n", i + 1,
Bin Meng337fc7e2017-07-19 21:50:00 +0800763 hub->desc.u.hs.DeviceRemovable[(i + 1) / 8] & \
Vivek Gautamceb49722013-04-12 16:34:33 +0530764 (1 << ((i + 1) % 8)) ? " not" : "");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000765
766 if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530767 debug("usb_hub_configure: failed to get Status - " \
768 "too long: %d\n", descriptor->bLength);
Simon Glass361ad6a2015-03-25 12:22:09 -0600769 return -EFBIG;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000770 }
771
Simon Glass361ad6a2015-03-25 12:22:09 -0600772 ret = usb_get_hub_status(dev, buffer);
773 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530774 debug("usb_hub_configure: failed to get Status %lX\n",
775 dev->status);
Simon Glass361ad6a2015-03-25 12:22:09 -0600776 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000777 }
778
Marek Vasut23faf2b2012-02-13 18:58:17 +0000779 hubsts = (struct usb_hub_status *)buffer;
Vivek Gautamceb49722013-04-12 16:34:33 +0530780
781 debug("get_hub_status returned status %X, change %X\n",
782 le16_to_cpu(hubsts->wHubStatus),
783 le16_to_cpu(hubsts->wHubChange));
784 debug("local power source is %s\n",
785 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
786 "lost (inactive)" : "good");
787 debug("%sover-current condition exists\n",
788 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
789 "" : "no ");
Bin Mengbbc6f062017-07-19 21:51:13 +0800790
791#ifdef CONFIG_DM_USB
792 /*
Bin Meng81060bb2017-07-19 21:51:18 +0800793 * Update USB host controller's internal representation of this hub
794 * after the hub descriptor is fetched.
795 */
796 ret = usb_update_hub_device(dev);
797 if (ret < 0 && ret != -ENOSYS) {
798 debug("%s: failed to update hub device for HCD (%x)\n",
799 __func__, ret);
800 return ret;
801 }
802
803 /*
Bin Mengbbc6f062017-07-19 21:51:13 +0800804 * A maximum of seven tiers are allowed in a USB topology, and the
805 * root hub occupies the first tier. The last tier ends with a normal
806 * USB device. USB 3.0 hubs use a 20-bit field called 'route string'
807 * to route packets to the designated downstream port. The hub uses a
808 * hub depth value multiplied by four as an offset into the 'route
809 * string' to locate the bits it uses to determine the downstream
810 * port number.
811 */
812 if (usb_hub_is_root_hub(dev->dev)) {
813 hub->hub_depth = -1;
814 } else {
815 struct udevice *hdev;
816 int depth = 0;
817
818 hdev = dev->dev->parent;
819 while (!usb_hub_is_root_hub(hdev)) {
820 depth++;
821 hdev = hdev->parent;
822 }
823
824 hub->hub_depth = depth;
825
826 if (usb_hub_is_superspeed(dev)) {
827 debug("set hub (%p) depth to %d\n", dev, depth);
828 /*
829 * This request sets the value that the hub uses to
830 * determine the index into the 'route string index'
831 * for this hub.
832 */
833 ret = usb_set_hub_depth(dev, depth);
834 if (ret < 0) {
835 debug("%s: failed to set hub depth (%lX)\n",
836 __func__, dev->status);
837 return ret;
838 }
839 }
840 }
841#endif
842
Marek Vasut23faf2b2012-02-13 18:58:17 +0000843 usb_hub_power_on(hub);
844
Dan Murphy3615a992013-08-01 14:06:01 -0500845 /*
846 * Reset any devices that may be in a bad state when applying
847 * the power. This is a __weak function. Resetting of the devices
848 * should occur in the board file of the device.
849 */
850 for (i = 0; i < dev->maxchild; i++)
Philipp Tomsich883946e2017-11-22 17:15:17 +0100851 usb_hub_reset_devices(hub, i + 1);
Dan Murphy3615a992013-08-01 14:06:01 -0500852
Stefan Roesec998da02016-03-15 13:59:15 +0100853 /*
854 * Only add the connected USB devices, including potential hubs,
855 * to a scanning list. This list will get scanned and devices that
856 * are detected (either via port connected or via port timeout)
857 * will get removed from this list. Scanning of the devices on this
858 * list will continue until all devices are removed.
859 */
Marek Vasut23faf2b2012-02-13 18:58:17 +0000860 for (i = 0; i < dev->maxchild; i++) {
Stefan Roesec998da02016-03-15 13:59:15 +0100861 struct usb_device_scan *usb_scan;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000862
Stefan Roesec998da02016-03-15 13:59:15 +0100863 usb_scan = calloc(1, sizeof(*usb_scan));
864 if (!usb_scan) {
865 printf("Can't allocate memory for USB device!\n");
866 return -ENOMEM;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000867 }
Stefan Roesec998da02016-03-15 13:59:15 +0100868 usb_scan->dev = dev;
869 usb_scan->hub = hub;
870 usb_scan->port = i;
871 list_add_tail(&usb_scan->list, &usb_scan_list);
872 }
Marek Vasut23faf2b2012-02-13 18:58:17 +0000873
Stefan Roesec998da02016-03-15 13:59:15 +0100874 /*
875 * And now call the scanning code which loops over the generated list
876 */
877 ret = usb_device_list_scan();
Marek Vasut23faf2b2012-02-13 18:58:17 +0000878
Stefan Roesec998da02016-03-15 13:59:15 +0100879 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000880}
881
Simon Glass361ad6a2015-03-25 12:22:09 -0600882static int usb_hub_check(struct usb_device *dev, int ifnum)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000883{
884 struct usb_interface *iface;
Simon Glass361ad6a2015-03-25 12:22:09 -0600885 struct usb_endpoint_descriptor *ep = NULL;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000886
887 iface = &dev->config.if_desc[ifnum];
888 /* Is it a hub? */
889 if (iface->desc.bInterfaceClass != USB_CLASS_HUB)
Simon Glass361ad6a2015-03-25 12:22:09 -0600890 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000891 /* Some hubs have a subclass of 1, which AFAICT according to the */
892 /* specs is not defined, but it works */
893 if ((iface->desc.bInterfaceSubClass != 0) &&
894 (iface->desc.bInterfaceSubClass != 1))
Simon Glass361ad6a2015-03-25 12:22:09 -0600895 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000896 /* Multiple endpoints? What kind of mutant ninja-hub is this? */
897 if (iface->desc.bNumEndpoints != 1)
Simon Glass361ad6a2015-03-25 12:22:09 -0600898 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000899 ep = &iface->ep_desc[0];
900 /* Output endpoint? Curiousier and curiousier.. */
901 if (!(ep->bEndpointAddress & USB_DIR_IN))
Simon Glass361ad6a2015-03-25 12:22:09 -0600902 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000903 /* If it's not an interrupt endpoint, we'd better punt! */
904 if ((ep->bmAttributes & 3) != 3)
Simon Glass361ad6a2015-03-25 12:22:09 -0600905 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000906 /* We found a hub */
Vivek Gautamceb49722013-04-12 16:34:33 +0530907 debug("USB hub found\n");
Simon Glass361ad6a2015-03-25 12:22:09 -0600908 return 0;
909
910err:
911 debug("USB hub not found: bInterfaceClass=%d, bInterfaceSubClass=%d, bNumEndpoints=%d\n",
912 iface->desc.bInterfaceClass, iface->desc.bInterfaceSubClass,
913 iface->desc.bNumEndpoints);
914 if (ep) {
915 debug(" bEndpointAddress=%#x, bmAttributes=%d",
916 ep->bEndpointAddress, ep->bmAttributes);
917 }
918
919 return -ENOENT;
920}
921
922int usb_hub_probe(struct usb_device *dev, int ifnum)
923{
924 int ret;
925
926 ret = usb_hub_check(dev, ifnum);
927 if (ret)
928 return 0;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000929 ret = usb_hub_configure(dev);
930 return ret;
931}
Simon Glass054fe482015-03-25 12:22:10 -0600932
933#ifdef CONFIG_DM_USB
934int usb_hub_scan(struct udevice *hub)
935{
Simon Glassbcbe3d12015-09-28 23:32:01 -0600936 struct usb_device *udev = dev_get_parent_priv(hub);
Simon Glass054fe482015-03-25 12:22:10 -0600937
938 return usb_hub_configure(udev);
939}
940
Simon Glass054fe482015-03-25 12:22:10 -0600941static int usb_hub_post_probe(struct udevice *dev)
942{
943 debug("%s\n", __func__);
944 return usb_hub_scan(dev);
945}
946
947static const struct udevice_id usb_hub_ids[] = {
948 { .compatible = "usb-hub" },
949 { }
950};
951
952U_BOOT_DRIVER(usb_generic_hub) = {
953 .name = "usb_hub",
954 .id = UCLASS_USB_HUB,
955 .of_match = usb_hub_ids,
956 .flags = DM_FLAG_ALLOC_PRIV_DMA,
957};
958
959UCLASS_DRIVER(usb_hub) = {
960 .id = UCLASS_USB_HUB,
961 .name = "usb_hub",
Simon Glass91195482016-07-05 17:10:10 -0600962 .post_bind = dm_scan_fdt_dev,
Simon Glass054fe482015-03-25 12:22:10 -0600963 .post_probe = usb_hub_post_probe,
964 .child_pre_probe = usb_child_pre_probe,
965 .per_child_auto_alloc_size = sizeof(struct usb_device),
966 .per_child_platdata_auto_alloc_size = sizeof(struct usb_dev_platdata),
Bin Mengdfa96e02017-07-19 21:51:09 +0800967 .per_device_auto_alloc_size = sizeof(struct usb_hub_device),
Simon Glass054fe482015-03-25 12:22:10 -0600968};
969
970static const struct usb_device_id hub_id_table[] = {
971 {
972 .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
973 .bDeviceClass = USB_CLASS_HUB
974 },
975 { } /* Terminating entry */
976};
977
Simon Glassabb59cf2015-07-06 16:47:51 -0600978U_BOOT_USB_DEVICE(usb_generic_hub, hub_id_table);
Simon Glass054fe482015-03-25 12:22:10 -0600979
980#endif