blob: d945b8d7bfc0ca14ab15351c0717627c3d589c42 [file] [log] [blame]
Mike Frysingerd9a5d112008-10-12 20:59:12 -04001/*
Bin Menga1875592016-02-05 19:30:11 -08002 * U-Boot - Configuration file for BF537 STAMP board
Mike Frysingerd9a5d112008-10-12 20:59:12 -04003 */
4
5#ifndef __CONFIG_BF527_EZKIT_H__
6#define __CONFIG_BF527_EZKIT_H__
7
Mike Frysingerf348ab82009-04-24 17:22:40 -04008#include <asm/config-pre.h>
Mike Frysingerd9a5d112008-10-12 20:59:12 -04009
Mike Frysingerd9a5d112008-10-12 20:59:12 -040010/*
11 * Processor Settings
12 */
Mike Frysingerfbcf8e82010-12-23 14:58:37 -050013#define CONFIG_BFIN_CPU bf527-0.0
Mike Frysingerd9a5d112008-10-12 20:59:12 -040014#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
15
Mike Frysingerd9a5d112008-10-12 20:59:12 -040016/*
17 * Clock Settings
18 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
19 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
20 */
21/* CONFIG_CLKIN_HZ is any value in Hz */
22#define CONFIG_CLKIN_HZ 25000000
23/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
24/* 1 = CLKIN / 2 */
25#define CONFIG_CLKIN_HALF 0
26/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
27/* 1 = bypass PLL */
28#define CONFIG_PLL_BYPASS 0
29/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
30/* Values can range from 0-63 (where 0 means 64) */
31#define CONFIG_VCO_MULT 21
32/* CCLK_DIV controls the core clock divider */
33/* Values can be 1, 2, 4, or 8 ONLY */
34#define CONFIG_CCLK_DIV 1
35/* SCLK_DIV controls the system clock divider */
36/* Values can range from 1-15 */
37#define CONFIG_SCLK_DIV 4
38
Mike Frysingerd9a5d112008-10-12 20:59:12 -040039/*
40 * Memory Settings
41 */
42#define CONFIG_MEM_ADD_WDTH 10
43#define CONFIG_MEM_SIZE 64
44
45#define CONFIG_EBIU_SDRRC_VAL 0x03F6
46#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS)
47
48#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL)
49#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
50#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
51
52#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
53#define CONFIG_SYS_MALLOC_LEN (640 * 1024)
54
Mike Frysingerd9a5d112008-10-12 20:59:12 -040055/*
56 * NAND Settings
57 * (can't be used same time as ethernet)
58 */
59#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
Mike Frysingerb7659ef2009-11-11 17:29:35 -050060# define CONFIG_BFIN_NFC
61# define CONFIG_BFIN_NFC_BOOTROM_ECC
Mike Frysingerd9a5d112008-10-12 20:59:12 -040062#endif
63#ifdef CONFIG_BFIN_NFC
64#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
65#define CONFIG_DRIVER_NAND_BFIN
66#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
67#define CONFIG_SYS_MAX_NAND_DEVICE 1
Mike Frysingerd9a5d112008-10-12 20:59:12 -040068#endif
69
Mike Frysingerd9a5d112008-10-12 20:59:12 -040070/*
71 * Network Settings
72 */
73#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \
74 !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC)
75#define ADI_CMDS_NETWORK 1
76#define CONFIG_BFIN_MAC
77#define CONFIG_RMII
78#define CONFIG_NETCONSOLE 1
Mike Frysingerd9a5d112008-10-12 20:59:12 -040079#endif
80#define CONFIG_HOSTNAME bf527-ezkit
Mike Frysingerd9a5d112008-10-12 20:59:12 -040081
82/*
83 * Flash Settings
84 */
85#define CONFIG_FLASH_CFI_DRIVER
86#define CONFIG_SYS_FLASH_BASE 0x20000000
87#define CONFIG_SYS_FLASH_CFI
88#define CONFIG_SYS_FLASH_PROTECTION
89#define CONFIG_SYS_MAX_FLASH_BANKS 1
90#define CONFIG_SYS_MAX_FLASH_SECT 259
91
Mike Frysingerd9a5d112008-10-12 20:59:12 -040092/*
93 * SPI Settings
94 */
95#define CONFIG_BFIN_SPI
96#define CONFIG_ENV_SPI_MAX_HZ 30000000
Mike Frysingerafac8b02009-06-14 22:29:35 -040097#define CONFIG_SF_DEFAULT_SPEED 30000000
Mike Frysingerd9a5d112008-10-12 20:59:12 -040098
Mike Frysingerd9a5d112008-10-12 20:59:12 -040099/*
100 * Env Storage Settings
101 */
102#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
103#define CONFIG_ENV_IS_IN_SPI_FLASH
Mike Frysinger53310b82009-05-05 01:35:41 -0400104#define CONFIG_ENV_OFFSET 0x10000
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400105#define CONFIG_ENV_SIZE 0x2000
Mike Frysinger53310b82009-05-05 01:35:41 -0400106#define CONFIG_ENV_SECT_SIZE 0x10000
Mike Frysingerb7659ef2009-11-11 17:29:35 -0500107#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
108#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
109#define CONFIG_ENV_IS_IN_NAND
110#define CONFIG_ENV_OFFSET 0x40000
111#define CONFIG_ENV_SIZE 0x20000
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400112#else
113#define CONFIG_ENV_IS_IN_FLASH
114#define CONFIG_ENV_OFFSET 0x4000
115#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
116#define CONFIG_ENV_SIZE 0x2000
117#define CONFIG_ENV_SECT_SIZE 0x2000
Mike Frysinger76d82182009-07-21 22:17:36 -0400118#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
Mike Frysingerb7659ef2009-11-11 17:29:35 -0500119#endif
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400120
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400121/*
122 * I2C Settings
123 */
Scott Jiangc4697032014-11-13 15:30:55 +0800124#define CONFIG_SYS_I2C
Scott Jiangfea9b692014-11-13 15:30:53 +0800125#define CONFIG_SYS_I2C_ADI
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400126
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400127/*
128 * USB Settings
129 */
130#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
Paul Kocialkowski95de1e22015-08-04 17:04:06 +0200131#define CONFIG_USB_MUSB_HCD
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400132#define CONFIG_USB_BLACKFIN
Paul Kocialkowski95de1e22015-08-04 17:04:06 +0200133#define CONFIG_USB_MUSB_TIMEOUT 100000
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400134#endif
135
Sonic Zhang955020c2013-02-20 18:05:16 +0800136/* Don't waste time transferring a logo over the UART */
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400137
138/*
Michael Hennerich10eafa12009-12-10 09:19:21 +0000139 * Video Settings
140 */
Sonic Zhang955020c2013-02-20 18:05:16 +0800141#ifdef CONFIG_VIDEO
Wolfgang Denkd24f2d32010-10-04 19:58:00 +0200142#ifdef CONFIG_BF527_EZKIT_REV_2_1
Michael Hennerich10eafa12009-12-10 09:19:21 +0000143# define CONFIG_LQ035Q1_SPI_BUS 0
144# define CONFIG_LQ035Q1_SPI_CS 7
Mike Frysinger42c6e9a2012-02-03 20:44:54 -0500145# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
146#else
147# define CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI
148#endif
149
150#ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
151# define EASYLOGO_HEADER <asm/bfin_logo_rgb565_230x230_lzma.h>
152#else
153# define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h>
Michael Hennerich10eafa12009-12-10 09:19:21 +0000154#endif
Sonic Zhang955020c2013-02-20 18:05:16 +0800155#endif /* CONFIG_VIDEO */
Michael Hennerich10eafa12009-12-10 09:19:21 +0000156
157/*
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400158 * Misc Settings
159 */
160#define CONFIG_MISC_INIT_R
161#define CONFIG_RTC_BFIN
162#define CONFIG_UART_CONSOLE 1
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400163
164/*
165 * Pull in common ADI header for remaining command/environment setup
166 */
167#include <configs/bfin_adi_common.h>
168
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400169#endif