blob: 222a510034e2ab3aa311137249662de2fba12332 [file] [log] [blame]
Walter Schweizera0a868b2016-10-06 23:29:56 +02001/*
2 * (C) Copyright 2011
3 * Jason Cooper <u-boot@lakedaemon.net>
4 *
5 * Based on work by:
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Siddarth Gore <gores@marvell.com>
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef _CONFIG_DS109_H
13#define _CONFIG_DS109_H
14
15/*
16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types
17 * from Linus' kernel.org tree. This hasn't been updated primarily due to
18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it
19 * here.
20 */
21#include <asm/mach-types.h>
22#ifdef MACH_TYPE_SYNOLOGY
23#error "MACH_TYPE_SYNOLOGY has been defined properly, please remove this."
24#else
25#define MACH_TYPE_SYNOLOGY 527
26#endif
27
28/*
29 * High Level Configuration Options (easy to change)
30 */
31#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
32#define CONFIG_MACH_TYPE MACH_TYPE_SYNOLOGY
33
34/*
35 * Commands configuration
36 */
37#define CONFIG_CMD_EXT2
38#define CONFIG_CMD_FAT
39
40/*
41 * mv-plug-common.h should be defined after CMD configs since it used them
42 * to enable certain macros
43 */
44#include "mv-plug-common.h"
45
46/*
47 * Environment variables configurations
48 */
49#ifdef CONFIG_SPI_FLASH
50#define CONFIG_ENV_IS_IN_SPI_FLASH 1
51#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
52#else
53#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
54#endif
55
56#ifdef CONFIG_CMD_SF
57#define CONFIG_HARD_SPI 1
58#define CONFIG_KIRKWOOD_SPI 1
59#define CONFIG_ENV_SPI_BUS 0
60#define CONFIG_ENV_SPI_CS 0
61#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
62#endif
63
64/*
65 * max 4k env size is enough, but in case of nand
66 * it has to be rounded to sector size
67 */
68#define CONFIG_ENV_SIZE 0x10000
69#define CONFIG_ENV_ADDR 0x3d0000
70#define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */
71
72/*
73 * Default environment variables
74 */
75#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
76 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
77 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
78 "bootm 0x6400000;"
79
80#define CONFIG_EXTRA_ENV_SETTINGS \
81 "x_bootcmd_ethernet=ping 192.168.1.2\0" \
82 "x_bootcmd_usb=usb start\0" \
83 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
84 "x_bootargs=console=ttyS0,115200\0" \
85 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
86 "ipaddr=192.168.1.5\0"
87
88/*
89 * Ethernet Driver configuration
90 */
91#ifdef CONFIG_CMD_NET
92#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */
93#define CONFIG_PHY_BASE_ADR 8
94#endif /* CONFIG_CMD_NET */
95
96/*
97 * SATA Driver configuration
98 */
99#ifdef CONFIG_MVSATA_IDE
100#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
101#endif /*CONFIG_MVSATA_IDE*/
102
103#endif /* _CONFIG_DS109_H */