blob: e868c13416578bbd2acddbf801c833424f00462c [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Michal Simek84c72042015-01-15 10:01:51 +01002/*
3 * Configuration for Xilinx ZynqMP
4 * (C) Copyright 2014 - 2015 Xilinx, Inc.
5 * Michal Simek <michal.simek@xilinx.com>
6 *
7 * Based on Configuration for Versatile Express
Michal Simek84c72042015-01-15 10:01:51 +01008 */
9
10#ifndef __XILINX_ZYNQMP_H
11#define __XILINX_ZYNQMP_H
12
13#define CONFIG_REMAKE_ELF
14
15/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
16
Michal Simek84c72042015-01-15 10:01:51 +010017/* Generic Interrupt Controller Definitions */
18#define CONFIG_GICV2
19#define GICD_BASE 0xF9010000
20#define GICC_BASE 0xF9020000
21
Soren Brinkmann8fbf6782016-07-27 14:12:03 -070022#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
Michal Simek84c72042015-01-15 10:01:51 +010023
Michal Simek84c72042015-01-15 10:01:51 +010024/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
Michal Simek713b6162015-11-05 08:32:14 +010025#if !defined(COUNTER_FREQUENCY)
26# define COUNTER_FREQUENCY 100000000
27#endif
Michal Simek84c72042015-01-15 10:01:51 +010028
29/* Size of malloc() pool */
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053030#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
Michal Simek84c72042015-01-15 10:01:51 +010031
32/* Serial setup */
Michal Simek636ac182016-02-23 10:02:29 +010033#define CONFIG_CPU_ARMV8
Michal Simek84c72042015-01-15 10:01:51 +010034
Michal Simek84c72042015-01-15 10:01:51 +010035#define CONFIG_SYS_BAUDRATE_TABLE \
36 { 4800, 9600, 19200, 38400, 57600, 115200 }
37
Michal Simekcb7ea822015-07-23 12:03:55 +020038/* BOOTP options */
39#define CONFIG_BOOTP_BOOTFILESIZE
Michal Simekcb7ea822015-07-23 12:03:55 +020040#define CONFIG_BOOTP_MAY_FAIL
Michal Simeka1207de2016-04-22 14:28:17 +020041
Siva Durga Prasad Paladugu78cb9652015-11-17 14:30:09 +053042#ifdef CONFIG_NAND_ARASAN
Siva Durga Prasad Paladugu78cb9652015-11-17 14:30:09 +053043# define CONFIG_SYS_MAX_NAND_DEVICE 1
Siva Durga Prasad Paladugu78cb9652015-11-17 14:30:09 +053044# define CONFIG_SYS_NAND_ONFI_DETECTION
Siva Durga Prasad Paladugu78cb9652015-11-17 14:30:09 +053045#endif
46
Michal Simek88f05a92018-01-15 12:52:59 +010047#if defined(CONFIG_SPL_BUILD)
48#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
49#endif
50
Michal Simek84c72042015-01-15 10:01:51 +010051/* Miscellaneous configurable options */
52#define CONFIG_SYS_LOAD_ADDR 0x8000000
53
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053054#if defined(CONFIG_ZYNQMP_USB)
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053055#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
56#define DFU_DEFAULT_POLL_TIMEOUT 300
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053057#define CONFIG_THOR_RESET_OFF
58#define DFU_ALT_INFO_RAM \
59 "dfu_ram_info=" \
Siva Durga Prasad Paladugu0e431402015-09-11 11:57:25 +053060 "setenv dfu_alt_info " \
Siva Durga Prasad Paladugu1b19daf2015-09-07 11:03:47 +053061 "Image ram $kernel_addr $kernel_size\\\\;" \
62 "system.dtb ram $fdt_addr $fdt_size\0" \
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053063 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
64 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
65
66#define DFU_ALT_INFO \
67 DFU_ALT_INFO_RAM
Siva Durga Prasad Paladugu5ce987f2016-05-12 10:54:41 +053068
69#ifndef CONFIG_SPL_BUILD
Siva Durga Prasad Paladugu5ce987f2016-05-12 10:54:41 +053070# define PARTS_DEFAULT \
71 "partitions=uuid_disk=${uuid_gpt_disk};" \
72 "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
73 "name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
74#endif
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053075#endif
76
77#if !defined(DFU_ALT_INFO)
78# define DFU_ALT_INFO
79#endif
80
Siva Durga Prasad Paladugu5ce987f2016-05-12 10:54:41 +053081#if !defined(PARTS_DEFAULT)
82# define PARTS_DEFAULT
83#endif
84
Michal Simek84c72042015-01-15 10:01:51 +010085/* Monitor Command Prompt */
86/* Console I/O Buffer Size */
87#define CONFIG_SYS_CBSIZE 2048
Michal Simek84c72042015-01-15 10:01:51 +010088#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
Michal Simek84c72042015-01-15 10:01:51 +010089#define CONFIG_SYS_MAXARGS 64
90
Michal Simekcb7ea822015-07-23 12:03:55 +020091/* Ethernet driver */
Michal Simek596e5782015-11-30 14:34:52 +010092#if defined(CONFIG_ZYNQ_GEM)
Michal Simekcb7ea822015-07-23 12:03:55 +020093# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
Siva Durga Prasad Paladugue2928f32016-01-05 15:21:46 +053094# define PHY_ANEG_TIMEOUT 20000
Michal Simekcb7ea822015-07-23 12:03:55 +020095#endif
96
Michal Simek84c72042015-01-15 10:01:51 +010097#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
98
Michal Simek84c72042015-01-15 10:01:51 +010099#define CONFIG_CLOCKS
100
Michal Simekb72894f2016-04-22 14:28:54 +0200101#define ENV_MEM_LAYOUT_SETTINGS \
102 "fdt_high=10000000\0" \
Michal Simekb72894f2016-04-22 14:28:54 +0200103 "fdt_addr_r=0x40000000\0" \
104 "pxefile_addr_r=0x10000000\0" \
105 "kernel_addr_r=0x18000000\0" \
Siva Durga Prasad Paladugu81764f52019-06-25 17:41:08 +0530106 "scriptaddr=0x20000000\0" \
Michal Simekb72894f2016-04-22 14:28:54 +0200107 "ramdisk_addr_r=0x02100000\0" \
Siva Durga Prasad Paladuguad78d262019-01-24 11:32:04 +0530108 "script_size_f=0x80000\0" \
Michal Simekb72894f2016-04-22 14:28:54 +0200109
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900110#if defined(CONFIG_MMC_SDHCI_ZYNQ)
Michal Simekb72894f2016-04-22 14:28:54 +0200111# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
112#else
113# define BOOT_TARGET_DEVICES_MMC(func)
114#endif
115
116#if defined(CONFIG_SATA_CEVA)
117# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
118#else
119# define BOOT_TARGET_DEVICES_SCSI(func)
120#endif
121
122#if defined(CONFIG_ZYNQMP_USB)
123# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
124#else
125# define BOOT_TARGET_DEVICES_USB(func)
126#endif
127
Joe Hershberger86271b32018-04-13 15:26:40 -0500128#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
Michal Simek1a82f592018-03-28 15:20:48 +0200129# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
130#else
131# define BOOT_TARGET_DEVICES_PXE(func)
132#endif
133
134#if defined(CONFIG_CMD_DHCP)
135# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
136#else
137# define BOOT_TARGET_DEVICES_DHCP(func)
138#endif
139
Siva Durga Prasad Paladuguad78d262019-01-24 11:32:04 +0530140#if defined(CONFIG_ZYNQMP_GQSPI)
141# define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, 0)
142#else
143# define BOOT_TARGET_DEVICES_QSPI(func)
144#endif
145
146#if defined(CONFIG_NAND_ARASAN)
147# define BOOT_TARGET_DEVICES_NAND(func) func(NAND, nand, 0)
148#else
149# define BOOT_TARGET_DEVICES_NAND(func)
150#endif
151
152#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
153 "bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
154 "sf read $scriptaddr $script_offset_f $script_size_f && " \
Michal Simek19d13042020-04-20 09:17:53 +0200155 "echo QSPI: Trying to boot script at ${scriptaddr} && " \
156 "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
Siva Durga Prasad Paladuguad78d262019-01-24 11:32:04 +0530157
158#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
159 #devtypel #instance " "
160
161#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
162 "bootcmd_" #devtypel #instance "= nand info && " \
163 "nand read $scriptaddr $script_offset_f $script_size_f && " \
Michal Simek19d13042020-04-20 09:17:53 +0200164 "echo NAND: Trying to boot script at ${scriptaddr} && " \
165 "source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"
Siva Durga Prasad Paladuguad78d262019-01-24 11:32:04 +0530166
167#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
168 #devtypel #instance " "
169
Siva Durga Prasad Paladugu5d2274c2019-06-25 17:41:09 +0530170#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
171
172#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
Michal Simek19d13042020-04-20 09:17:53 +0200173 "bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
174 "source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
Siva Durga Prasad Paladugu5d2274c2019-06-25 17:41:09 +0530175
176#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
177 "jtag "
178
Michal Simekb72894f2016-04-22 14:28:54 +0200179#define BOOT_TARGET_DEVICES(func) \
Siva Durga Prasad Paladugu5d2274c2019-06-25 17:41:09 +0530180 BOOT_TARGET_DEVICES_JTAG(func) \
Michal Simekb72894f2016-04-22 14:28:54 +0200181 BOOT_TARGET_DEVICES_MMC(func) \
Siva Durga Prasad Paladuguad78d262019-01-24 11:32:04 +0530182 BOOT_TARGET_DEVICES_QSPI(func) \
183 BOOT_TARGET_DEVICES_NAND(func) \
Michal Simekb72894f2016-04-22 14:28:54 +0200184 BOOT_TARGET_DEVICES_USB(func) \
185 BOOT_TARGET_DEVICES_SCSI(func) \
Michal Simek1a82f592018-03-28 15:20:48 +0200186 BOOT_TARGET_DEVICES_PXE(func) \
187 BOOT_TARGET_DEVICES_DHCP(func)
Michal Simekb72894f2016-04-22 14:28:54 +0200188
189#include <config_distro_bootcmd.h>
190
191/* Initial environment variables */
192#ifndef CONFIG_EXTRA_ENV_SETTINGS
193#define CONFIG_EXTRA_ENV_SETTINGS \
194 ENV_MEM_LAYOUT_SETTINGS \
195 BOOTENV \
196 DFU_ALT_INFO
197#endif
198
Michal Simekd58fc122016-08-19 14:14:52 +0200199/* SPL can't handle all huge variables - define just DFU */
Andrew F. Davis6536ca42019-01-17 13:43:02 -0600200#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
Michal Simekd58fc122016-08-19 14:14:52 +0200201#undef CONFIG_EXTRA_ENV_SETTINGS
202# define CONFIG_EXTRA_ENV_SETTINGS \
203 "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
204 "atf-uboot.ub ram 0x10000000 0x1000000;" \
205 "Image ram 0x80000 0x3f80000;" \
206 "system.dtb ram 0x4000000 0x100000\0" \
207 "dfu_bufsiz=0x1000\0"
208#endif
209
Soren Brinkmann8fbf6782016-07-27 14:12:03 -0700210#define CONFIG_SPL_STACK 0xfffffffc
Michal Simekd58fc122016-08-19 14:14:52 +0200211#define CONFIG_SPL_MAX_SIZE 0x40000
Michal Simeke6a9ed02015-11-20 13:17:22 +0100212
213/* Just random location in OCM */
Michal Simek8ed31f32016-08-30 14:58:46 +0200214#define CONFIG_SPL_BSS_START_ADDR 0x0
215#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
Michal Simeke6a9ed02015-11-20 13:17:22 +0100216
Michal Simek24124ab2017-01-16 12:07:33 +0100217#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
Michal Simek24124ab2017-01-16 12:07:33 +0100218# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
219# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
220# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
Hannes Schmelzerabf9e5d2019-08-22 15:41:43 +0200221#endif
Michal Simek24124ab2017-01-16 12:07:33 +0100222
Michal Simeke6a9ed02015-11-20 13:17:22 +0100223/* u-boot is like dtb */
224#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
225#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
226
227/* ATF is my kernel image */
Michal Simek1309f672016-09-21 11:42:58 +0200228#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
Michal Simeke6a9ed02015-11-20 13:17:22 +0100229
230/* FIT load address for RAM boot */
231#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
232
233/* MMC support */
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900234#ifdef CONFIG_MMC_SDHCI_ZYNQ
Michal Simeke6a9ed02015-11-20 13:17:22 +0100235# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
236# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
237# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
238# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
Michal Simek5b21d642019-10-02 15:55:57 +0200239# if defined(CONFIG_SPL_LOAD_FIT)
240# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
241# else
242# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
243# endif
Michal Simeke6a9ed02015-11-20 13:17:22 +0100244#endif
245
Andrew F. Davis6536ca42019-01-17 13:43:02 -0600246#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
Michal Simekd58fc122016-08-19 14:14:52 +0200247# define CONFIG_SPL_ENV_SUPPORT
248# define CONFIG_SPL_HASH_SUPPORT
249# define CONFIG_ENV_MAX_ENTRIES 10
Michal Simekb45c17c2017-12-01 14:34:03 +0100250#endif
Michal Simekd58fc122016-08-19 14:14:52 +0200251
Michal Simekb45c17c2017-12-01 14:34:03 +0100252#define CONFIG_SYS_SPL_MALLOC_START 0x20000000
253#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
Michal Simekd58fc122016-08-19 14:14:52 +0200254
255#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
256# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
257#endif
Michal Simekd58fc122016-08-19 14:14:52 +0200258
Michal Simekfb4000e2017-02-07 14:32:26 +0100259#define CONFIG_BOARD_EARLY_INIT_F
260
Michal Simek84c72042015-01-15 10:01:51 +0100261#endif /* __XILINX_ZYNQMP_H */