blob: 4ba2f3d99fd67861bc1d9fee5bba71b69315d3d0 [file] [log] [blame]
wdenk232c1502004-03-12 00:14:09 +00001/*
2 * (C) Copyright 2003
3 * Gerry Hamel, geh@ti.com, Texas Instruments
4 *
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +02005 * (C) Copyright 2006
6 * Bryan O'Donoghue, deckard@CodeHermit.ie
7 *
wdenk232c1502004-03-12 00:14:09 +00008 * Based on
9 * linux/drivers/usbd/ep0.c
10 *
11 * Copyright (c) 2000, 2001, 2002 Lineo
12 * Copyright (c) 2001 Hewlett Packard
13 *
14 * By:
15 * Stuart Lynne <sl@lineo.com>,
16 * Tom Rushworth <tbr@lineo.com>,
17 * Bruce Balden <balden@lineo.com>
18 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020019 * SPDX-License-Identifier: GPL-2.0+
wdenk232c1502004-03-12 00:14:09 +000020 */
21
22/*
23 * This is the builtin ep0 control function. It implements all required functionality
24 * for responding to control requests (SETUP packets).
25 *
26 * XXX
27 *
28 * Currently we do not pass any SETUP packets (or other) to the configured
29 * function driver. This may need to change.
30 *
31 * XXX
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +020032 *
33 * As alluded to above, a simple callback cdc_recv_setup has been implemented
Wolfgang Denk386eda02006-06-14 18:14:56 +020034 * in the usb_device data structure to facilicate passing
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +020035 * Common Device Class packets to a function driver.
36 *
37 * XXX
wdenk232c1502004-03-12 00:14:09 +000038 */
39
40#include <common.h>
Jean-Christophe PLAGNIOL-VILLARD2731b9a2009-04-03 12:46:58 +020041#include <usbdevice.h>
wdenk232c1502004-03-12 00:14:09 +000042
43#if 0
44#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
45#else
46#define dbg_ep0(lvl,fmt,args...)
47#endif
48
49/* EP0 Configuration Set ********************************************************************* */
50
51
52/**
53 * ep0_get_status - fill in URB data with appropriate status
54 * @device:
55 * @urb:
56 * @index:
57 * @requesttype:
58 *
59 */
60static int ep0_get_status (struct usb_device_instance *device,
61 struct urb *urb, int index, int requesttype)
62{
63 char *cp;
64
65 urb->actual_length = 2;
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +020066 cp = (char*)urb->buffer;
wdenk232c1502004-03-12 00:14:09 +000067 cp[0] = cp[1] = 0;
68
69 switch (requesttype) {
70 case USB_REQ_RECIPIENT_DEVICE:
71 cp[0] = USB_STATUS_SELFPOWERED;
72 break;
73 case USB_REQ_RECIPIENT_INTERFACE:
74 break;
75 case USB_REQ_RECIPIENT_ENDPOINT:
76 cp[0] = usbd_endpoint_halted (device, index);
77 break;
78 case USB_REQ_RECIPIENT_OTHER:
79 urb->actual_length = 0;
80 default:
81 break;
82 }
83 dbg_ep0 (2, "%02x %02x", cp[0], cp[1]);
84 return 0;
85}
86
87/**
88 * ep0_get_one
89 * @device:
90 * @urb:
91 * @result:
92 *
93 * Set a single byte value in the urb send buffer. Return non-zero to signal
94 * a request error.
95 */
96static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
97 __u8 result)
98{
99 urb->actual_length = 1; /* XXX 2? */
100 ((char *) urb->buffer)[0] = result;
101 return 0;
102}
103
104/**
105 * copy_config
106 * @urb: pointer to urb
107 * @data: pointer to configuration data
108 * @length: length of data
109 *
110 * Copy configuration data to urb transfer buffer if there is room for it.
111 */
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200112void copy_config (struct urb *urb, void *data, int max_length,
wdenk232c1502004-03-12 00:14:09 +0000113 int max_buf)
114{
115 int available;
116 int length;
117
118 /*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */
119 /* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */
120
121 if (!data) {
122 dbg_ep0 (1, "data is NULL");
123 return;
124 }
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200125 length = max_length;
wdenk232c1502004-03-12 00:14:09 +0000126
127 if (length > max_length) {
128 dbg_ep0 (1, "length: %d >= max_length: %d", length,
129 max_length);
130 return;
131 }
132 /*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */
133 /* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */
134
135 if ((available =
136 /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) {
137 return;
138 }
139 /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
140 /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
141
142 if (length > available) {
143 length = available;
144 }
145 /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
146 /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
147
148 memcpy (urb->buffer + urb->actual_length, data, length);
149 urb->actual_length += length;
150
151 dbg_ep0 (3,
152 "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d",
153 urb->actual_length, urb->buffer_length, max_buf, max_length,
154 available);
155}
156
157/**
158 * ep0_get_descriptor
159 * @device:
160 * @urb:
161 * @max:
162 * @descriptor_type:
163 * @index:
164 *
165 * Called by ep0_rx_process for a get descriptor device command. Determine what
166 * descriptor is being requested, copy to send buffer. Return zero if ok to send,
167 * return non-zero to signal a request error.
168 */
169static int ep0_get_descriptor (struct usb_device_instance *device,
170 struct urb *urb, int max, int descriptor_type,
171 int index)
172{
173 int port = 0; /* XXX compound device */
wdenk232c1502004-03-12 00:14:09 +0000174
175 /*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */
176
177 if (!urb || !urb->buffer || !urb->buffer_length
178 || (urb->buffer_length < 255)) {
179 dbg_ep0 (2, "invalid urb %p", urb);
180 return -1L;
181 }
182
183 /* setup tx urb */
184 urb->actual_length = 0;
wdenk232c1502004-03-12 00:14:09 +0000185
186 dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
187
188 switch (descriptor_type) {
189 case USB_DESCRIPTOR_TYPE_DEVICE:
190 {
191 struct usb_device_descriptor *device_descriptor;
wdenk232c1502004-03-12 00:14:09 +0000192 if (!
193 (device_descriptor =
194 usbd_device_device_descriptor (device, port))) {
195 return -1;
196 }
197 /* copy descriptor for this device */
198 copy_config (urb, device_descriptor,
199 sizeof (struct usb_device_descriptor),
200 max);
201
202 /* correct the correct control endpoint 0 max packet size into the descriptor */
203 device_descriptor =
204 (struct usb_device_descriptor *) urb->buffer;
wdenk232c1502004-03-12 00:14:09 +0000205
206 }
Wolfgang Denk386eda02006-06-14 18:14:56 +0200207 dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
wdenk232c1502004-03-12 00:14:09 +0000208 break;
209
210 case USB_DESCRIPTOR_TYPE_CONFIGURATION:
211 {
wdenk232c1502004-03-12 00:14:09 +0000212 struct usb_configuration_descriptor
213 *configuration_descriptor;
214 struct usb_device_descriptor *device_descriptor;
wdenk232c1502004-03-12 00:14:09 +0000215 if (!
216 (device_descriptor =
217 usbd_device_device_descriptor (device, port))) {
218 return -1;
219 }
220 /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
Harald Weltee73b5212008-07-07 00:58:05 +0800221 if (index >= device_descriptor->bNumConfigurations) {
222 dbg_ep0 (0, "index too large: %d >= %d", index,
wdenk232c1502004-03-12 00:14:09 +0000223 device_descriptor->
224 bNumConfigurations);
225 return -1;
226 }
227
228 if (!
229 (configuration_descriptor =
230 usbd_device_configuration_descriptor (device,
231 port,
232 index))) {
233 dbg_ep0 (0,
234 "usbd_device_configuration_descriptor failed: %d",
235 index);
236 return -1;
237 }
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200238 dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
wdenk232c1502004-03-12 00:14:09 +0000239 copy_config (urb, configuration_descriptor,
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200240
241 cpu_to_le16(configuration_descriptor->wTotalLength),
wdenk232c1502004-03-12 00:14:09 +0000242 max);
wdenk232c1502004-03-12 00:14:09 +0000243 }
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200244
wdenk232c1502004-03-12 00:14:09 +0000245 break;
246
247 case USB_DESCRIPTOR_TYPE_STRING:
248 {
249 struct usb_string_descriptor *string_descriptor;
wdenk232c1502004-03-12 00:14:09 +0000250 if (!(string_descriptor = usbd_get_string (index))) {
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200251 serial_printf("Invalid string index %d\n", index);
wdenk232c1502004-03-12 00:14:09 +0000252 return -1;
253 }
Wolfgang Denk386eda02006-06-14 18:14:56 +0200254 dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
wdenk232c1502004-03-12 00:14:09 +0000255 copy_config (urb, string_descriptor, string_descriptor->bLength, max);
256 }
257 break;
258 case USB_DESCRIPTOR_TYPE_INTERFACE:
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200259 serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
wdenk232c1502004-03-12 00:14:09 +0000260 return -1;
261 case USB_DESCRIPTOR_TYPE_ENDPOINT:
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200262 serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
wdenk232c1502004-03-12 00:14:09 +0000263 return -1;
264 case USB_DESCRIPTOR_TYPE_HID:
265 {
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200266 serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
wdenk232c1502004-03-12 00:14:09 +0000267 return -1; /* unsupported at this time */
268#if 0
269 int bNumInterface =
270 le16_to_cpu (urb->device_request.wIndex);
271 int bAlternateSetting = 0;
272 int class = 0;
273 struct usb_class_descriptor *class_descriptor;
274
275 if (!(class_descriptor =
276 usbd_device_class_descriptor_index (device,
277 port, 0,
278 bNumInterface,
279 bAlternateSetting,
280 class))
281 || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) {
282 dbg_ep0 (3, "[%d] interface is not HID",
283 bNumInterface);
284 return -1;
285 }
286 /* copy descriptor for this class */
287 copy_config (urb, class_descriptor,
288 class_descriptor->descriptor.hid.bLength,
289 max);
290#endif
291 }
292 break;
293 case USB_DESCRIPTOR_TYPE_REPORT:
294 {
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200295 serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
wdenk232c1502004-03-12 00:14:09 +0000296 return -1; /* unsupported at this time */
297#if 0
298 int bNumInterface =
299 le16_to_cpu (urb->device_request.wIndex);
300 int bAlternateSetting = 0;
301 int class = 0;
302 struct usb_class_report_descriptor *report_descriptor;
303
304 if (!(report_descriptor =
305 usbd_device_class_report_descriptor_index
306 (device, port, 0, bNumInterface,
307 bAlternateSetting, class))
308 || report_descriptor->bDescriptorType !=
309 USB_DT_REPORT) {
310 dbg_ep0 (3, "[%d] descriptor is not REPORT",
311 bNumInterface);
312 return -1;
313 }
314 /* copy report descriptor for this class */
315 /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
316 if (max - urb->actual_length > 0) {
317 int length =
Masahiro Yamadac79cba32014-09-18 13:28:06 +0900318 min(report_descriptor->wLength,
wdenk232c1502004-03-12 00:14:09 +0000319 max - urb->actual_length);
320 memcpy (urb->buffer + urb->actual_length,
321 &report_descriptor->bData[0], length);
322 urb->actual_length += length;
323 }
324#endif
325 }
326 break;
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200327 case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530328#if defined(CONFIG_USBD_HS)
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200329 {
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530330 struct usb_qualifier_descriptor *qualifier_descriptor =
331 device->qualifier_descriptor;
332
333 if (!qualifier_descriptor)
334 return -1;
335
336 /* copy descriptor for this device */
337 copy_config(urb, qualifier_descriptor,
338 sizeof(struct usb_qualifier_descriptor),
339 max);
340
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200341 }
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530342 dbg_ep0(3, "copied qualifier descriptor, actual_length: 0x%x",
343 urb->actual_length);
344#else
345 return -1;
346#endif
347 break;
348
wdenk232c1502004-03-12 00:14:09 +0000349 default:
350 return -1;
351 }
352
353
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200354 dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
wdenk232c1502004-03-12 00:14:09 +0000355 urb->buffer, urb->buffer_length, urb->actual_length,
356 device->bus->endpoint_array[0].tx_packetSize);
357/*
358 if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) {
359 dbg_ep0(0, "adding null byte");
360 urb->buffer[urb->actual_length++] = 0;
361 dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d",
362 urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize);
363 }
364*/
365 return 0;
366
367}
368
369/**
370 * ep0_recv_setup - called to indicate URB has been received
371 * @urb: pointer to struct urb
372 *
373 * Check if this is a setup packet, process the device request, put results
374 * back into the urb and return zero or non-zero to indicate success (DATA)
375 * or failure (STALL).
376 *
377 */
378int ep0_recv_setup (struct urb *urb)
379{
380 /*struct usb_device_request *request = urb->buffer; */
381 /*struct usb_device_instance *device = urb->device; */
382
383 struct usb_device_request *request;
384 struct usb_device_instance *device;
385 int address;
386
387 dbg_ep0 (0, "entering ep0_recv_setup()");
388 if (!urb || !urb->device) {
389 dbg_ep0 (3, "invalid URB %p", urb);
390 return -1;
391 }
392
393 request = &urb->device_request;
394 device = urb->device;
395
396 dbg_ep0 (3, "urb: %p device: %p", urb, urb->device);
397
398
399 /*dbg_ep0(2, "- - - - - - - - - -"); */
400
401 dbg_ep0 (2,
402 "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s",
403 request->bmRequestType, request->bRequest,
404 le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex),
405 le16_to_cpu (request->wLength),
406 USBD_DEVICE_REQUESTS (request->bRequest));
407
408 /* handle USB Standard Request (c.f. USB Spec table 9-2) */
409 if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200410 if(device->device_state <= STATE_CONFIGURED){
411 /* Attempt to handle a CDC specific request if we are
412 * in the configured state.
413 */
414 return device->cdc_recv_setup(request,urb);
415 }
wdenk232c1502004-03-12 00:14:09 +0000416 dbg_ep0 (1, "non standard request: %x",
417 request->bmRequestType & USB_REQ_TYPE_MASK);
418 return -1; /* Stall here */
419 }
420
421 switch (device->device_state) {
422 case STATE_CREATED:
423 case STATE_ATTACHED:
424 case STATE_POWERED:
425 /* It actually is important to allow requests in these states,
426 * Windows will request descriptors before assigning an
427 * address to the client.
428 */
429
430 /*dbg_ep0 (1, "request %s not allowed in this state: %s", */
431 /* USBD_DEVICE_REQUESTS(request->bRequest), */
432 /* usbd_device_states[device->device_state]); */
433 /*return -1; */
434 break;
435
436 case STATE_INIT:
437 case STATE_DEFAULT:
438 switch (request->bRequest) {
439 case USB_REQ_GET_STATUS:
440 case USB_REQ_GET_INTERFACE:
441 case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
442 case USB_REQ_CLEAR_FEATURE:
443 case USB_REQ_SET_FEATURE:
444 case USB_REQ_SET_DESCRIPTOR:
445 /* case USB_REQ_SET_CONFIGURATION: */
446 case USB_REQ_SET_INTERFACE:
447 dbg_ep0 (1,
448 "request %s not allowed in DEFAULT state: %s",
449 USBD_DEVICE_REQUESTS (request->bRequest),
450 usbd_device_states[device->device_state]);
451 return -1;
452
453 case USB_REQ_SET_CONFIGURATION:
454 case USB_REQ_SET_ADDRESS:
455 case USB_REQ_GET_DESCRIPTOR:
456 case USB_REQ_GET_CONFIGURATION:
457 break;
458 }
459 case STATE_ADDRESSED:
460 case STATE_CONFIGURED:
461 break;
462 case STATE_UNKNOWN:
463 dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
464 USBD_DEVICE_REQUESTS (request->bRequest),
465 usbd_device_states[device->device_state]);
466 return -1;
467 }
468
469 /* handle all requests that return data (direction bit set on bm RequestType) */
470 if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) {
471
472 dbg_ep0 (3, "Device-to-Host");
473
474 switch (request->bRequest) {
475
476 case USB_REQ_GET_STATUS:
477 return ep0_get_status (device, urb, request->wIndex,
478 request->bmRequestType &
479 USB_REQ_RECIPIENT_MASK);
480
481 case USB_REQ_GET_DESCRIPTOR:
482 return ep0_get_descriptor (device, urb,
483 le16_to_cpu (request->wLength),
484 le16_to_cpu (request->wValue) >> 8,
485 le16_to_cpu (request->wValue) & 0xff);
486
487 case USB_REQ_GET_CONFIGURATION:
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200488 serial_printf("get config %d\n", device->configuration);
wdenk232c1502004-03-12 00:14:09 +0000489 return ep0_get_one (device, urb,
490 device->configuration);
491
492 case USB_REQ_GET_INTERFACE:
493 return ep0_get_one (device, urb, device->alternate);
494
495 case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
496 return -1;
497
498 case USB_REQ_CLEAR_FEATURE:
499 case USB_REQ_SET_FEATURE:
500 case USB_REQ_SET_ADDRESS:
501 case USB_REQ_SET_DESCRIPTOR:
502 case USB_REQ_SET_CONFIGURATION:
503 case USB_REQ_SET_INTERFACE:
504 return -1;
505 }
506 }
507 /* handle the requests that do not return data */
508 else {
509
510
511 /*dbg_ep0(3, "Host-to-Device"); */
512 switch (request->bRequest) {
513
514 case USB_REQ_CLEAR_FEATURE:
515 case USB_REQ_SET_FEATURE:
516 dbg_ep0 (0, "Host-to-Device");
517 switch (request->
518 bmRequestType & USB_REQ_RECIPIENT_MASK) {
519 case USB_REQ_RECIPIENT_DEVICE:
520 /* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */
521 /* XXX fall through for now as we do not support either */
522 case USB_REQ_RECIPIENT_INTERFACE:
523 case USB_REQ_RECIPIENT_OTHER:
524 dbg_ep0 (0, "request %s not",
525 USBD_DEVICE_REQUESTS (request->bRequest));
526 default:
527 return -1;
528
529 case USB_REQ_RECIPIENT_ENDPOINT:
530 dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue));
531 if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) {
532 /*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */
533 /* request->bRequest == USB_REQ_SET_FEATURE); */
534 /* NEED TO IMPLEMENT THIS!!! */
535 return -1;
536 } else {
537 dbg_ep0 (1, "request %s bad wValue: %04x",
538 USBD_DEVICE_REQUESTS
539 (request->bRequest),
540 le16_to_cpu (request->wValue));
541 return -1;
542 }
543 }
544
545 case USB_REQ_SET_ADDRESS:
546 /* check if this is a re-address, reset first if it is (this shouldn't be possible) */
547 if (device->device_state != STATE_DEFAULT) {
548 dbg_ep0 (1, "set_address: %02x state: %s",
549 le16_to_cpu (request->wValue),
550 usbd_device_states[device->device_state]);
551 return -1;
552 }
553 address = le16_to_cpu (request->wValue);
554 if ((address & 0x7f) != address) {
555 dbg_ep0 (1, "invalid address %04x %04x",
556 address, address & 0x7f);
557 return -1;
558 }
559 device->address = address;
560
561 /*dbg_ep0(2, "address: %d %d %d", */
562 /* request->wValue, le16_to_cpu(request->wValue), device->address); */
563
wdenk232c1502004-03-12 00:14:09 +0000564 return 0;
565
566 case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
567 dbg_ep0 (0, "set descriptor: NOT SUPPORTED");
568 return -1;
569
570 case USB_REQ_SET_CONFIGURATION:
571 /* c.f. 9.4.7 - the top half of wValue is reserved */
Harald Weltee73b5212008-07-07 00:58:05 +0800572 device->configuration = le16_to_cpu(request->wValue) & 0xff;
573
wdenk232c1502004-03-12 00:14:09 +0000574 /* reset interface and alternate settings */
575 device->interface = device->alternate = 0;
576
577 /*dbg_ep0(2, "set configuration: %d", device->configuration); */
578 /*serial_printf("DEVICE_CONFIGURED.. event?\n"); */
579 return 0;
580
581 case USB_REQ_SET_INTERFACE:
582 device->interface = le16_to_cpu (request->wIndex);
583 device->alternate = le16_to_cpu (request->wValue);
584 /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
585 serial_printf ("DEVICE_SET_INTERFACE.. event?\n");
586 return 0;
587
588 case USB_REQ_GET_STATUS:
589 case USB_REQ_GET_DESCRIPTOR:
590 case USB_REQ_GET_CONFIGURATION:
591 case USB_REQ_GET_INTERFACE:
592 case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
593 return -1;
594 }
595 }
596 return -1;
597}