| Dan Murphy | c7ba7bd | 2016-05-02 15:45:58 -0500 | [diff] [blame^] | 1 | * Texas Instruments - dp83867 Giga bit ethernet phy |
| 2 | |
| 3 | Required properties: |
| 4 | - reg - The ID number for the phy, usually a small integer |
| 5 | - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h |
| 6 | for applicable values |
| 7 | - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h |
| 8 | for applicable values |
| 9 | - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h |
| 10 | for applicable values |
| 11 | |
| 12 | Default child nodes are standard Ethernet PHY device |
| 13 | nodes as described in doc/devicetree/bindings/net/ethernet.txt |
| 14 | |
| 15 | Example: |
| 16 | |
| 17 | ethernet-phy@0 { |
| 18 | reg = <0>; |
| 19 | ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| 20 | ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; |
| 21 | ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 22 | }; |
| 23 | |
| 24 | Datasheet can be found: |
| 25 | http://www.ti.com/product/DP83867IR/datasheet |