wdenk | 0db5bca | 2003-03-31 17:27:09 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2000-2002 Wolfgang Denk, DENX Software Engineering, wd@denx.de |
| 3 | * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | /* |
| 25 | * File: status_led.c |
| 26 | * |
| 27 | * Discription: Blink a board led to show boot progress. Led's |
| 28 | * are connected via the MIOS module. |
| 29 | */ |
| 30 | |
| 31 | #include <common.h> |
| 32 | #include <mpc5xx.h> |
| 33 | #include <status_led.h> |
| 34 | |
| 35 | #ifdef CONFIG_STATUS_LED |
| 36 | |
| 37 | typedef struct { |
| 38 | ulong mask; |
| 39 | int state; |
| 40 | int period; |
| 41 | int cnt; |
| 42 | } led_dev_t; |
| 43 | |
| 44 | led_dev_t led_dev[] = { |
| 45 | { STATUS_LED_BIT, |
| 46 | STATUS_LED_STATE, |
| 47 | STATUS_LED_PERIOD, |
| 48 | 0, |
| 49 | }, |
| 50 | #if defined(STATUS_LED_BIT1) |
| 51 | { STATUS_LED_BIT1, |
| 52 | STATUS_LED_STATE1, |
| 53 | STATUS_LED_PERIOD1, |
| 54 | 0, |
| 55 | }, |
| 56 | #endif |
| 57 | #if defined(STATUS_LED_BIT2) |
| 58 | { STATUS_LED_BIT2, |
| 59 | STATUS_LED_STATE2, |
| 60 | STATUS_LED_PERIOD2, |
| 61 | 0, |
| 62 | }, |
| 63 | #endif |
| 64 | #if defined(STATUS_LED_BIT3) |
| 65 | { STATUS_LED_BIT3, |
| 66 | STATUS_LED_STATE3, |
| 67 | STATUS_LED_PERIOD3, |
| 68 | 0, |
| 69 | }, |
| 70 | #endif |
| 71 | }; |
| 72 | |
| 73 | #define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t)) |
| 74 | |
| 75 | static int status_led_init_done = 0; |
| 76 | |
| 77 | static void status_led_init (void) |
| 78 | { |
| 79 | volatile immap_t *immr = (immap_t *)CFG_IMMR; |
| 80 | int i; |
| 81 | |
| 82 | for (i=0; i<MAX_LED_DEV; ++i) { |
| 83 | led_dev_t *ld = &led_dev[i]; |
| 84 | |
| 85 | immr->STATUS_LED_DIR = STATUS_LED_BIT; |
| 86 | |
| 87 | #if (STATUS_LED_ACTIVE == 0) |
| 88 | if (ld->state == STATUS_LED_ON) |
| 89 | immr->STATUS_LED_DAT &= ~(ld->mask); |
| 90 | else |
| 91 | immr->STATUS_LED_DAT |= ld->mask ; |
| 92 | #else |
| 93 | if (ld->state == STATUS_LED_ON) |
| 94 | immr->STATUS_LED_DAT |= ld->mask ; |
| 95 | else |
| 96 | immr->STATUS_LED_DAT &= ~(ld->mask); |
| 97 | #endif |
| 98 | } |
| 99 | |
| 100 | status_led_init_done = 1; |
| 101 | } |
| 102 | |
| 103 | void status_led_tick (ulong timestamp) |
| 104 | { |
| 105 | volatile immap_t *immr = (immap_t *)CFG_IMMR; |
| 106 | int i; |
| 107 | |
| 108 | if (!status_led_init_done) |
| 109 | status_led_init(); |
| 110 | |
| 111 | for (i=0; i<MAX_LED_DEV; ++i) { |
| 112 | led_dev_t *ld = &led_dev[i]; |
| 113 | |
| 114 | if (ld->state != STATUS_LED_BLINKING) |
| 115 | continue; |
| 116 | |
| 117 | if (++(ld->cnt) >= ld->period) { |
| 118 | immr->STATUS_LED_DAT ^= ld->mask; |
| 119 | ld->cnt -= ld->period; |
| 120 | } |
| 121 | } |
| 122 | } |
| 123 | |
| 124 | void status_led_set (int led, int state) |
| 125 | { |
| 126 | volatile immap_t *immr = (immap_t *)CFG_IMMR; |
| 127 | led_dev_t *ld; |
| 128 | |
| 129 | if (led < 0 || led >= MAX_LED_DEV) |
| 130 | return; |
| 131 | |
| 132 | if (!status_led_init_done) |
| 133 | status_led_init(); |
| 134 | |
| 135 | ld = &led_dev[led]; |
| 136 | |
| 137 | switch (state) { |
| 138 | default: |
| 139 | return; |
| 140 | case STATUS_LED_BLINKING: |
| 141 | ld->cnt = 0; /* always start with full period */ |
| 142 | /* fall through */ /* always start with LED _ON_ */ |
| 143 | case STATUS_LED_ON: |
| 144 | #if (STATUS_LED_ACTIVE == 0) |
| 145 | immr->STATUS_LED_DAT &= ~(ld->mask); |
| 146 | #else |
| 147 | immr->STATUS_LED_DAT |= ld->mask ; |
| 148 | #endif |
| 149 | break; |
| 150 | case STATUS_LED_OFF: |
| 151 | #if (STATUS_LED_ACTIVE == 0) |
| 152 | immr->STATUS_LED_DAT |= ld->mask ; |
| 153 | #else |
| 154 | immr->STATUS_LED_DAT &= ~(ld->mask); |
| 155 | #endif |
| 156 | break; |
| 157 | } |
| 158 | ld->state = state; |
| 159 | } |
| 160 | |
| 161 | #endif /* CONFIG_STATUS_LED */ |