Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Heiko Schocher | c0dcece | 2013-08-19 16:39:01 +0200 | [diff] [blame] | 2 | /* |
| 3 | * pinmux setup for siemens pxm2 board |
| 4 | * |
| 5 | * (C) Copyright 2013 Siemens Schweiz AG |
| 6 | * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| 7 | * |
| 8 | * Based on: |
| 9 | * u-boot:/board/ti/am335x/mux.c |
| 10 | * |
| 11 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
Heiko Schocher | c0dcece | 2013-08-19 16:39:01 +0200 | [diff] [blame] | 12 | */ |
| 13 | |
| 14 | #include <common.h> |
| 15 | #include <asm/arch/sys_proto.h> |
| 16 | #include <asm/arch/hardware.h> |
| 17 | #include <asm/arch/mux.h> |
| 18 | #include <asm/io.h> |
| 19 | #include <i2c.h> |
| 20 | #include "board.h" |
| 21 | |
| 22 | static struct module_pin_mux uart0_pin_mux[] = { |
| 23 | {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ |
| 24 | {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ |
| 25 | {OFFSET(nnmi), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_TXD */ |
| 26 | {-1}, |
| 27 | }; |
| 28 | |
Miquel Raynal | 88718be | 2019-10-03 19:50:03 +0200 | [diff] [blame] | 29 | #ifdef CONFIG_MTD_RAW_NAND |
Heiko Schocher | c0dcece | 2013-08-19 16:39:01 +0200 | [diff] [blame] | 30 | static struct module_pin_mux nand_pin_mux[] = { |
| 31 | {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ |
| 32 | {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ |
| 33 | {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ |
| 34 | {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ |
| 35 | {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ |
| 36 | {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ |
| 37 | {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ |
| 38 | {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ |
| 39 | {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ |
| 40 | {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ |
| 41 | {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ |
| 42 | {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ |
| 43 | {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ |
| 44 | {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ |
| 45 | {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ |
| 46 | {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUP_EN}, /* RGMII2_RD0 */ |
| 47 | {OFFSET(mcasp0_ahclkx), MODE(7) | PULLUDEN}, /* MCASP0_AHCLKX */ |
| 48 | {-1}, |
| 49 | }; |
| 50 | #endif |
| 51 | |
| 52 | static struct module_pin_mux i2c0_pin_mux[] = { |
| 53 | {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| 54 | {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| 55 | {-1}, |
| 56 | }; |
| 57 | |
| 58 | static struct module_pin_mux i2c1_pin_mux[] = { |
| 59 | {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| 60 | {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| 61 | {-1}, |
| 62 | }; |
| 63 | |
| 64 | #ifndef CONFIG_NO_ETH |
| 65 | static struct module_pin_mux rgmii1_pin_mux[] = { |
| 66 | {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ |
| 67 | {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ |
| 68 | {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ |
| 69 | {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ |
| 70 | {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ |
| 71 | {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ |
| 72 | {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ |
| 73 | {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ |
| 74 | {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ |
| 75 | {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ |
| 76 | {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ |
| 77 | {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ |
| 78 | {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ |
| 79 | {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ |
| 80 | {-1}, |
| 81 | }; |
| 82 | |
| 83 | static struct module_pin_mux rgmii2_pin_mux[] = { |
| 84 | {OFFSET(gpmc_a0), MODE(2)}, /* RGMII2_TCTL */ |
| 85 | {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII2_RCTL */ |
| 86 | {OFFSET(gpmc_a2), MODE(2)}, /* RGMII2_TD3 */ |
| 87 | {OFFSET(gpmc_a3), MODE(2)}, /* RGMII2_TD2 */ |
| 88 | {OFFSET(gpmc_a4), MODE(2)}, /* RGMII2_TD1 */ |
| 89 | {OFFSET(gpmc_a5), MODE(2)}, /* RGMII2_TD0 */ |
| 90 | {OFFSET(gpmc_a6), MODE(7)}, /* RGMII2_TCLK */ |
| 91 | {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII2_RCLK */ |
| 92 | {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII2_RD3 */ |
| 93 | {OFFSET(gpmc_a9), MODE(7)}, /* RGMII2_RD2 */ |
| 94 | {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII2_RD1 */ |
| 95 | {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ |
| 96 | {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ |
| 97 | {-1}, |
| 98 | }; |
| 99 | #endif |
| 100 | |
| 101 | #ifdef CONFIG_MMC |
| 102 | static struct module_pin_mux mmc0_pin_mux[] = { |
| 103 | {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ |
| 104 | {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ |
| 105 | {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ |
| 106 | {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ |
| 107 | {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ |
| 108 | {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ |
| 109 | {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ |
| 110 | {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUDEN)}, /* MMC0_CD */ |
| 111 | {-1}, |
| 112 | }; |
| 113 | #endif |
| 114 | |
| 115 | static struct module_pin_mux lcdc_pin_mux[] = { |
| 116 | {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD_DAT0 */ |
| 117 | {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD_DAT1 */ |
| 118 | {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD_DAT2 */ |
| 119 | {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD_DAT3 */ |
| 120 | {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD_DAT4 */ |
| 121 | {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD_DAT5 */ |
| 122 | {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD_DAT6 */ |
| 123 | {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD_DAT7 */ |
| 124 | {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD_DAT8 */ |
| 125 | {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD_DAT9 */ |
| 126 | {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD_DAT10 */ |
| 127 | {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD_DAT11 */ |
| 128 | {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD_DAT12 */ |
| 129 | {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD_DAT13 */ |
| 130 | {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD_DAT14 */ |
| 131 | {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD_DAT15 */ |
| 132 | {OFFSET(gpmc_ad8), (MODE(1))}, /* LCD_DAT16 */ |
| 133 | {OFFSET(gpmc_ad9), (MODE(1))}, /* LCD_DAT17 */ |
| 134 | {OFFSET(gpmc_ad10), (MODE(1))}, /* LCD_DAT18 */ |
| 135 | {OFFSET(gpmc_ad11), (MODE(1))}, /* LCD_DAT19 */ |
| 136 | {OFFSET(gpmc_ad12), (MODE(1))}, /* LCD_DAT20 */ |
| 137 | {OFFSET(gpmc_ad13), (MODE(1))}, /* LCD_DAT21 */ |
| 138 | {OFFSET(gpmc_ad14), (MODE(1))}, /* LCD_DAT22 */ |
| 139 | {OFFSET(gpmc_ad15), (MODE(1))}, /* LCD_DAT23 */ |
| 140 | {OFFSET(lcd_vsync), (MODE(0))}, /* LCD_VSYNC */ |
| 141 | {OFFSET(lcd_hsync), (MODE(0))}, /* LCD_HSYNC */ |
| 142 | {OFFSET(lcd_pclk), (MODE(0))}, /* LCD_PCLK */ |
| 143 | {OFFSET(lcd_ac_bias_en), (MODE(0))}, /* LCD_AC_BIAS_EN */ |
| 144 | {-1}, |
| 145 | }; |
| 146 | |
| 147 | static struct module_pin_mux ecap0_pin_mux[] = { |
| 148 | {OFFSET(ecap0_in_pwm0_out), (MODE(0))}, |
| 149 | {-1}, |
| 150 | }; |
| 151 | |
| 152 | static struct module_pin_mux gpio_pin_mux[] = { |
| 153 | {OFFSET(mcasp0_fsx), MODE(7)}, /* GPIO3_15 LCD power*/ |
| 154 | {OFFSET(mcasp0_axr0), MODE(7)}, /* GPIO3_16 Backlight */ |
| 155 | {OFFSET(gpmc_a9), MODE(7)}, /* GPIO1_25 Touch power */ |
| 156 | {-1}, |
| 157 | }; |
| 158 | void enable_i2c0_pin_mux(void) |
| 159 | { |
| 160 | configure_module_pin_mux(i2c0_pin_mux); |
| 161 | } |
| 162 | |
| 163 | void enable_uart0_pin_mux(void) |
| 164 | { |
| 165 | configure_module_pin_mux(uart0_pin_mux); |
| 166 | } |
| 167 | |
| 168 | void enable_board_pin_mux(void) |
| 169 | { |
| 170 | configure_module_pin_mux(uart0_pin_mux); |
| 171 | configure_module_pin_mux(i2c1_pin_mux); |
Miquel Raynal | 88718be | 2019-10-03 19:50:03 +0200 | [diff] [blame] | 172 | #ifdef CONFIG_MTD_RAW_NAND |
Heiko Schocher | c0dcece | 2013-08-19 16:39:01 +0200 | [diff] [blame] | 173 | configure_module_pin_mux(nand_pin_mux); |
| 174 | #endif |
| 175 | #ifndef CONFIG_NO_ETH |
| 176 | configure_module_pin_mux(rgmii1_pin_mux); |
| 177 | configure_module_pin_mux(rgmii2_pin_mux); |
| 178 | #endif |
| 179 | #ifdef CONFIG_MMC |
| 180 | configure_module_pin_mux(mmc0_pin_mux); |
| 181 | #endif |
| 182 | configure_module_pin_mux(lcdc_pin_mux); |
| 183 | configure_module_pin_mux(gpio_pin_mux); |
| 184 | configure_module_pin_mux(ecap0_pin_mux); |
| 185 | } |