Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Vitaly Andrianov | d9a76e7 | 2016-03-04 10:36:42 -0600 | [diff] [blame] | 2 | /* |
| 3 | * Keystone2: DDR3 SPD configuration |
| 4 | * |
| 5 | * (C) Copyright 2015-2016 Texas Instruments Incorporated, <www.ti.com> |
Vitaly Andrianov | d9a76e7 | 2016-03-04 10:36:42 -0600 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <common.h> |
Simon Glass | f7ae49f | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 9 | #include <log.h> |
Vitaly Andrianov | d9a76e7 | 2016-03-04 10:36:42 -0600 | [diff] [blame] | 10 | |
| 11 | #include <i2c.h> |
| 12 | #include <ddr_spd.h> |
| 13 | #include <asm/arch/ddr3.h> |
| 14 | #include <asm/arch/hardware.h> |
| 15 | |
| 16 | #define DUMP_DDR_CONFIG 0 /* set to 1 to debug */ |
| 17 | #define debug_ddr_cfg(fmt, args...) \ |
| 18 | debug_cond(DUMP_DDR_CONFIG, fmt, ##args) |
| 19 | |
| 20 | static void dump_phy_config(struct ddr3_phy_config *ptr) |
| 21 | { |
| 22 | debug_ddr_cfg("\npllcr 0x%08X\n", ptr->pllcr); |
| 23 | debug_ddr_cfg("pgcr1_mask 0x%08X\n", ptr->pgcr1_mask); |
| 24 | debug_ddr_cfg("pgcr1_val 0x%08X\n", ptr->pgcr1_val); |
| 25 | debug_ddr_cfg("ptr0 0x%08X\n", ptr->ptr0); |
| 26 | debug_ddr_cfg("ptr1 0x%08X\n", ptr->ptr1); |
| 27 | debug_ddr_cfg("ptr2 0x%08X\n", ptr->ptr2); |
| 28 | debug_ddr_cfg("ptr3 0x%08X\n", ptr->ptr3); |
| 29 | debug_ddr_cfg("ptr4 0x%08X\n", ptr->ptr4); |
| 30 | debug_ddr_cfg("dcr_mask 0x%08X\n", ptr->dcr_mask); |
| 31 | debug_ddr_cfg("dcr_val 0x%08X\n", ptr->dcr_val); |
| 32 | debug_ddr_cfg("dtpr0 0x%08X\n", ptr->dtpr0); |
| 33 | debug_ddr_cfg("dtpr1 0x%08X\n", ptr->dtpr1); |
| 34 | debug_ddr_cfg("dtpr2 0x%08X\n", ptr->dtpr2); |
| 35 | debug_ddr_cfg("mr0 0x%08X\n", ptr->mr0); |
| 36 | debug_ddr_cfg("mr1 0x%08X\n", ptr->mr1); |
| 37 | debug_ddr_cfg("mr2 0x%08X\n", ptr->mr2); |
| 38 | debug_ddr_cfg("dtcr 0x%08X\n", ptr->dtcr); |
| 39 | debug_ddr_cfg("pgcr2 0x%08X\n", ptr->pgcr2); |
| 40 | debug_ddr_cfg("zq0cr1 0x%08X\n", ptr->zq0cr1); |
| 41 | debug_ddr_cfg("zq1cr1 0x%08X\n", ptr->zq1cr1); |
| 42 | debug_ddr_cfg("zq2cr1 0x%08X\n", ptr->zq2cr1); |
| 43 | debug_ddr_cfg("pir_v1 0x%08X\n", ptr->pir_v1); |
| 44 | debug_ddr_cfg("pir_v2 0x%08X\n\n", ptr->pir_v2); |
| 45 | }; |
| 46 | |
| 47 | static void dump_emif_config(struct ddr3_emif_config *ptr) |
| 48 | { |
| 49 | debug_ddr_cfg("\nsdcfg 0x%08X\n", ptr->sdcfg); |
| 50 | debug_ddr_cfg("sdtim1 0x%08X\n", ptr->sdtim1); |
| 51 | debug_ddr_cfg("sdtim2 0x%08X\n", ptr->sdtim2); |
| 52 | debug_ddr_cfg("sdtim3 0x%08X\n", ptr->sdtim3); |
| 53 | debug_ddr_cfg("sdtim4 0x%08X\n", ptr->sdtim4); |
| 54 | debug_ddr_cfg("zqcfg 0x%08X\n", ptr->zqcfg); |
| 55 | debug_ddr_cfg("sdrfc 0x%08X\n\n", ptr->sdrfc); |
| 56 | }; |
| 57 | |
| 58 | #define TEMP NORMAL_TEMP |
| 59 | #define VBUS_CLKPERIOD 1.875 /* Corresponds to vbus=533MHz, */ |
| 60 | #define PLLGS_VAL (4000.0 / VBUS_CLKPERIOD) /* 4 us */ |
| 61 | #define PLLPD_VAL (1000.0 / VBUS_CLKPERIOD) /* 1 us */ |
| 62 | #define PLLLOCK_VAL (100000.0 / VBUS_CLKPERIOD) /* 100 us */ |
| 63 | #define PLLRST_VAL (9000.0 / VBUS_CLKPERIOD) /* 9 us */ |
| 64 | #define PHYRST_VAL 0x10 |
| 65 | #define DDR_TERM RZQ_4_TERM |
| 66 | #define SDRAM_DRIVE RZQ_7_IMP |
| 67 | #define DYN_ODT ODT_DISABLE |
| 68 | |
| 69 | enum srt { |
| 70 | NORMAL_TEMP, |
| 71 | EXTENDED_TEMP |
| 72 | }; |
| 73 | |
| 74 | enum out_impedance { |
| 75 | RZQ_6_IMP = 0, |
| 76 | RZQ_7_IMP |
| 77 | }; |
| 78 | |
| 79 | enum die_term { |
| 80 | ODT_DISABLE = 0, |
| 81 | RZQ_4_TERM, |
| 82 | RZQ_2_TERM, |
| 83 | RZQ_6_TERM, |
| 84 | RZQ_12_TERM, |
| 85 | RZQ_8_TERM |
| 86 | }; |
| 87 | |
| 88 | struct ddr3_sodimm { |
| 89 | u32 t_ck; |
| 90 | u32 freqsel; |
| 91 | u32 t_xp; |
| 92 | u32 t_cke; |
| 93 | u32 t_pllpd; |
| 94 | u32 t_pllgs; |
| 95 | u32 t_phyrst; |
| 96 | u32 t_plllock; |
| 97 | u32 t_pllrst; |
| 98 | u32 t_rfc; |
| 99 | u32 t_xs; |
| 100 | u32 t_dinit0; |
| 101 | u32 t_dinit1; |
| 102 | u32 t_dinit2; |
| 103 | u32 t_dinit3; |
| 104 | u32 t_rtp; |
| 105 | u32 t_wtr; |
| 106 | u32 t_rp; |
| 107 | u32 t_rcd; |
| 108 | u32 t_ras; |
| 109 | u32 t_rrd; |
| 110 | u32 t_rc; |
| 111 | u32 t_faw; |
| 112 | u32 t_mrd; |
| 113 | u32 t_mod; |
| 114 | u32 t_wlo; |
| 115 | u32 t_wlmrd; |
| 116 | u32 t_xsdll; |
| 117 | u32 t_xpdll; |
| 118 | u32 t_ckesr; |
| 119 | u32 t_dllk; |
| 120 | u32 t_wr; |
| 121 | u32 t_wr_bin; |
| 122 | u32 cas; |
| 123 | u32 cwl; |
| 124 | u32 asr; |
| 125 | u32 pasr; |
| 126 | u32 t_refprd; |
| 127 | u8 sdram_type; |
| 128 | u8 ibank; |
| 129 | u8 pagesize; |
| 130 | u8 t_rrd2; |
| 131 | u8 t_ras_max; |
| 132 | u8 t_zqcs; |
| 133 | u32 refresh_rate; |
| 134 | u8 t_csta; |
| 135 | |
| 136 | u8 rank; |
| 137 | u8 mirrored; |
| 138 | u8 buswidth; |
| 139 | }; |
| 140 | |
| 141 | static u8 cas_latancy(u16 temp) |
| 142 | { |
| 143 | int loop; |
| 144 | u8 cas_bin = 0; |
| 145 | |
| 146 | for (loop = 0; loop < 32; loop += 2, temp >>= 1) { |
| 147 | if (temp & 0x0001) |
| 148 | cas_bin = (loop > 15) ? loop - 15 : loop; |
| 149 | } |
| 150 | |
| 151 | return cas_bin; |
| 152 | } |
| 153 | |
| 154 | static int ddr3_get_size_in_mb(ddr3_spd_eeprom_t *buf) |
| 155 | { |
| 156 | return (((buf->organization & 0x38) >> 3) + 1) * |
| 157 | (256 << (buf->density_banks & 0xf)); |
| 158 | } |
| 159 | |
| 160 | static int ddrtimingcalculation(ddr3_spd_eeprom_t *buf, struct ddr3_sodimm *spd, |
| 161 | struct ddr3_spd_cb *spd_cb) |
| 162 | { |
| 163 | u32 mtb, clk_freq; |
| 164 | |
| 165 | if ((buf->mem_type != 0x0b) || |
| 166 | ((buf->density_banks & 0x70) != 0x00)) |
| 167 | return 1; |
| 168 | |
| 169 | spd->sdram_type = 0x03; |
| 170 | spd->ibank = 0x03; |
| 171 | |
| 172 | mtb = buf->mtb_dividend * 1000 / buf->mtb_divisor; |
| 173 | |
| 174 | spd->t_ck = buf->tck_min * mtb; |
| 175 | |
| 176 | spd_cb->ddrspdclock = 2000000 / spd->t_ck; |
| 177 | clk_freq = spd_cb->ddrspdclock / 2; |
| 178 | |
| 179 | spd->rank = ((buf->organization & 0x38) >> 3) + 1; |
| 180 | if (spd->rank > 2) |
| 181 | return 1; |
| 182 | |
| 183 | spd->pagesize = (buf->addressing & 0x07) + 1; |
| 184 | if (spd->pagesize > 3) |
| 185 | return 1; |
| 186 | |
| 187 | spd->buswidth = 8 << (buf->bus_width & 0x7); |
| 188 | if ((spd->buswidth < 16) || (spd->buswidth > 64)) |
| 189 | return 1; |
| 190 | |
| 191 | spd->mirrored = buf->mod_section.unbuffered.addr_mapping & 1; |
| 192 | |
| 193 | printf("DDR3A Speed will be configured for %d Operation.\n", |
| 194 | spd_cb->ddrspdclock); |
| 195 | if (spd_cb->ddrspdclock == 1333) { |
| 196 | spd->t_xp = ((3 * spd->t_ck) > 6000) ? |
| 197 | 3 : ((5999 / spd->t_ck) + 1); |
| 198 | spd->t_cke = ((3 * spd->t_ck) > 5625) ? |
| 199 | 3 : ((5624 / spd->t_ck) + 1); |
| 200 | } else if (spd_cb->ddrspdclock == 1600) { |
| 201 | spd->t_xp = ((3 * spd->t_ck) > 6000) ? |
| 202 | 3 : ((5999 / spd->t_ck) + 1); |
| 203 | spd->t_cke = ((3 * spd->t_ck) > 5000) ? |
| 204 | 3 : ((4999 / spd->t_ck) + 1); |
| 205 | } else { |
| 206 | printf("Unsupported DDR3 speed %d\n", spd_cb->ddrspdclock); |
| 207 | return 1; |
| 208 | } |
| 209 | |
| 210 | spd->t_xpdll = (spd->t_ck > 2400) ? 10 : 24000 / spd->t_ck; |
| 211 | spd->t_ckesr = spd->t_cke + 1; |
| 212 | |
| 213 | /* SPD Calculated Values */ |
| 214 | spd->cas = cas_latancy((buf->caslat_msb << 8) | |
| 215 | buf->caslat_lsb); |
| 216 | |
| 217 | spd->t_wr = (buf->twr_min * mtb) / spd->t_ck; |
| 218 | spd->t_wr_bin = (spd->t_wr / 2) & 0x07; |
| 219 | |
| 220 | spd->t_rcd = ((buf->trcd_min * mtb) - 1) / spd->t_ck + 1; |
| 221 | spd->t_rrd = ((buf->trrd_min * mtb) - 1) / spd->t_ck + 1; |
| 222 | spd->t_rp = (((buf->trp_min * mtb) - 1) / spd->t_ck) + 1; |
| 223 | |
| 224 | spd->t_ras = (((buf->tras_trc_ext & 0x0f) << 8 | buf->tras_min_lsb) * |
| 225 | mtb) / spd->t_ck; |
| 226 | |
| 227 | spd->t_rc = (((((buf->tras_trc_ext & 0xf0) << 4) | buf->trc_min_lsb) * |
| 228 | mtb) - 1) / spd->t_ck + 1; |
| 229 | |
| 230 | spd->t_rfc = (buf->trfc_min_lsb | (buf->trfc_min_msb << 8)) * mtb / |
| 231 | 1000; |
| 232 | spd->t_wtr = (buf->twtr_min * mtb) / spd->t_ck; |
| 233 | spd->t_rtp = (buf->trtp_min * mtb) / spd->t_ck; |
| 234 | |
| 235 | spd->t_xs = (((spd->t_rfc + 10) * 1000) / spd->t_ck); |
| 236 | spd->t_rfc = ((spd->t_rfc * 1000) - 1) / spd->t_ck + 1; |
| 237 | |
| 238 | spd->t_faw = (((buf->tfaw_msb << 8) | buf->tfaw_min) * mtb) / spd->t_ck; |
| 239 | spd->t_rrd2 = ((((buf->tfaw_msb << 8) | |
| 240 | buf->tfaw_min) * mtb) / (4 * spd->t_ck)) - 1; |
| 241 | |
| 242 | /* Hard-coded values */ |
| 243 | spd->t_mrd = 0x00; |
| 244 | spd->t_mod = 0x00; |
| 245 | spd->t_wlo = 0x0C; |
| 246 | spd->t_wlmrd = 0x28; |
| 247 | spd->t_xsdll = 0x200; |
| 248 | spd->t_ras_max = 0x0F; |
| 249 | spd->t_csta = 0x05; |
| 250 | spd->t_dllk = 0x200; |
| 251 | |
| 252 | /* CAS Write Latency */ |
| 253 | if (spd->t_ck >= 2500) |
| 254 | spd->cwl = 0; |
| 255 | else if (spd->t_ck >= 1875) |
| 256 | spd->cwl = 1; |
| 257 | else if (spd->t_ck >= 1500) |
| 258 | spd->cwl = 2; |
| 259 | else if (spd->t_ck >= 1250) |
| 260 | spd->cwl = 3; |
| 261 | else if (spd->t_ck >= 1071) |
| 262 | spd->cwl = 4; |
| 263 | else |
| 264 | spd->cwl = 5; |
| 265 | |
| 266 | /* SD:RAM Thermal and Refresh Options */ |
| 267 | spd->asr = (buf->therm_ref_opt & 0x04) >> 2; |
| 268 | spd->pasr = (buf->therm_ref_opt & 0x80) >> 7; |
| 269 | spd->t_zqcs = 64; |
| 270 | |
| 271 | spd->t_refprd = (TEMP == NORMAL_TEMP) ? 7812500 : 3906250; |
| 272 | spd->t_refprd = spd->t_refprd / spd->t_ck; |
| 273 | |
| 274 | spd->refresh_rate = spd->t_refprd; |
| 275 | spd->t_refprd = spd->t_refprd * 5; |
| 276 | |
| 277 | /* Set MISC PHY space registers fields */ |
| 278 | if ((clk_freq / 2) >= 166 && (clk_freq / 2 < 275)) |
| 279 | spd->freqsel = 0x03; |
| 280 | else if ((clk_freq / 2) > 225 && (clk_freq / 2 < 385)) |
| 281 | spd->freqsel = 0x01; |
| 282 | else if ((clk_freq / 2) > 335 && (clk_freq / 2 < 534)) |
| 283 | spd->freqsel = 0x00; |
| 284 | |
| 285 | spd->t_dinit0 = 500000000 / spd->t_ck; /* CKE low time 500 us */ |
| 286 | spd->t_dinit1 = spd->t_xs; |
| 287 | spd->t_dinit2 = 200000000 / spd->t_ck; /* Reset low time 200 us */ |
| 288 | /* Time from ZQ initialization command to first command (1 us) */ |
| 289 | spd->t_dinit3 = 1000000 / spd->t_ck; |
| 290 | |
| 291 | spd->t_pllgs = PLLGS_VAL + 1; |
| 292 | spd->t_pllpd = PLLPD_VAL + 1; |
| 293 | spd->t_plllock = PLLLOCK_VAL + 1; |
| 294 | spd->t_pllrst = PLLRST_VAL; |
| 295 | spd->t_phyrst = PHYRST_VAL; |
| 296 | |
| 297 | spd_cb->ddr_size_gbyte = ddr3_get_size_in_mb(buf) / 1024; |
| 298 | |
| 299 | return 0; |
| 300 | } |
| 301 | |
| 302 | static void init_ddr3param(struct ddr3_spd_cb *spd_cb, |
| 303 | struct ddr3_sodimm *spd) |
| 304 | { |
| 305 | spd_cb->phy_cfg.pllcr = (spd->freqsel & 3) << 18 | 0xE << 13; |
| 306 | spd_cb->phy_cfg.pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK); |
| 307 | spd_cb->phy_cfg.pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)); |
| 308 | spd_cb->phy_cfg.ptr0 = ((spd->t_pllpd & 0x7ff) << 21) | |
| 309 | ((spd->t_pllgs & 0x7fff) << 6) | (spd->t_phyrst & 0x3f); |
| 310 | spd_cb->phy_cfg.ptr1 = ((spd->t_plllock & 0xffff) << 16) | |
| 311 | (spd->t_pllrst & 0x1fff); |
| 312 | spd_cb->phy_cfg.ptr2 = 0; |
| 313 | spd_cb->phy_cfg.ptr3 = ((spd->t_dinit1 & 0x1ff) << 20) | |
| 314 | (spd->t_dinit0 & 0xfffff); |
| 315 | spd_cb->phy_cfg.ptr4 = ((spd->t_dinit3 & 0x3ff) << 18) | |
| 316 | (spd->t_dinit2 & 0x3ffff); |
| 317 | |
| 318 | spd_cb->phy_cfg.dcr_mask = PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK; |
| 319 | spd_cb->phy_cfg.dcr_val = 1 << 10; |
| 320 | |
| 321 | if (spd->mirrored) { |
| 322 | spd_cb->phy_cfg.dcr_mask |= NOSRA_MASK | UDIMM_MASK; |
| 323 | spd_cb->phy_cfg.dcr_val |= (1 << 27) | (1 << 29); |
| 324 | } |
| 325 | |
| 326 | spd_cb->phy_cfg.dtpr0 = (spd->t_rc & 0x3f) << 26 | |
| 327 | (spd->t_rrd & 0xf) << 22 | |
| 328 | (spd->t_ras & 0x3f) << 16 | (spd->t_rcd & 0xf) << 12 | |
| 329 | (spd->t_rp & 0xf) << 8 | (spd->t_wtr & 0xf) << 4 | |
| 330 | (spd->t_rtp & 0xf); |
| 331 | spd_cb->phy_cfg.dtpr1 = (spd->t_wlo & 0xf) << 26 | |
| 332 | (spd->t_wlmrd & 0x3f) << 20 | (spd->t_rfc & 0x1ff) << 11 | |
| 333 | (spd->t_faw & 0x3f) << 5 | (spd->t_mod & 0x7) << 2 | |
| 334 | (spd->t_mrd & 0x3); |
| 335 | |
| 336 | spd_cb->phy_cfg.dtpr2 = 0 << 31 | 1 << 30 | 0 << 29 | |
| 337 | (spd->t_dllk & 0x3ff) << 19 | (spd->t_ckesr & 0xf) << 15; |
| 338 | |
| 339 | spd_cb->phy_cfg.dtpr2 |= (((spd->t_xp > spd->t_xpdll) ? |
| 340 | spd->t_xp : spd->t_xpdll) & |
| 341 | 0x1f) << 10; |
| 342 | |
| 343 | spd_cb->phy_cfg.dtpr2 |= (((spd->t_xs > spd->t_xsdll) ? |
| 344 | spd->t_xs : spd->t_xsdll) & |
| 345 | 0x3ff); |
| 346 | |
| 347 | spd_cb->phy_cfg.mr0 = 1 << 12 | (spd->t_wr_bin & 0x7) << 9 | 0 << 8 | |
| 348 | 0 << 7 | ((spd->cas & 0x0E) >> 1) << 4 | 0 << 3 | |
| 349 | (spd->cas & 0x01) << 2; |
| 350 | |
| 351 | spd_cb->phy_cfg.mr1 = 0 << 12 | 0 << 11 | 0 << 7 | 0 << 3 | |
| 352 | ((DDR_TERM >> 2) & 1) << 9 | ((DDR_TERM >> 1) & 1) << 6 | |
| 353 | (DDR_TERM & 0x1) << 2 | ((SDRAM_DRIVE >> 1) & 1) << 5 | |
| 354 | (SDRAM_DRIVE & 1) << 1 | 0 << 0; |
| 355 | |
| 356 | spd_cb->phy_cfg.mr2 = DYN_ODT << 9 | TEMP << 7 | (spd->asr & 1) << 6 | |
| 357 | (spd->cwl & 7) << 3 | (spd->pasr & 7); |
| 358 | |
| 359 | spd_cb->phy_cfg.dtcr = (spd->rank == 2) ? 0x730035C7 : 0x710035C7; |
| 360 | spd_cb->phy_cfg.pgcr2 = (0xF << 20) | ((int)spd->t_refprd & 0x3ffff); |
| 361 | |
| 362 | spd_cb->phy_cfg.zq0cr1 = 0x0000005D; |
| 363 | spd_cb->phy_cfg.zq1cr1 = 0x0000005B; |
| 364 | spd_cb->phy_cfg.zq2cr1 = 0x0000005B; |
| 365 | |
| 366 | spd_cb->phy_cfg.pir_v1 = 0x00000033; |
| 367 | spd_cb->phy_cfg.pir_v2 = 0x0000FF81; |
| 368 | |
| 369 | /* EMIF Registers */ |
| 370 | spd_cb->emif_cfg.sdcfg = spd->sdram_type << 29 | (DDR_TERM & 7) << 25 | |
| 371 | (DYN_ODT & 3) << 22 | (spd->cwl & 0x7) << 14 | |
| 372 | (spd->cas & 0xf) << 8 | (spd->ibank & 3) << 5 | |
| 373 | (spd->buswidth & 3) << 12 | (spd->pagesize & 3); |
| 374 | |
| 375 | if (spd->rank == 2) |
| 376 | spd_cb->emif_cfg.sdcfg |= 1 << 3; |
| 377 | |
| 378 | spd_cb->emif_cfg.sdtim1 = ((spd->t_wr - 1) & 0x1f) << 25 | |
| 379 | ((spd->t_ras - 1) & 0x7f) << 18 | |
| 380 | ((spd->t_rc - 1) & 0xff) << 10 | |
| 381 | (spd->t_rrd2 & 0x3f) << 4 | |
| 382 | ((spd->t_wtr - 1) & 0xf); |
| 383 | |
| 384 | spd_cb->emif_cfg.sdtim2 = 0x07 << 10 | ((spd->t_rp - 1) & 0x1f) << 5 | |
| 385 | ((spd->t_rcd - 1) & 0x1f); |
| 386 | |
| 387 | spd_cb->emif_cfg.sdtim3 = ((spd->t_xp - 2) & 0xf) << 28 | |
| 388 | ((spd->t_xs - 1) & 0x3ff) << 18 | |
| 389 | ((spd->t_xsdll - 1) & 0x3ff) << 8 | |
| 390 | ((spd->t_rtp - 1) & 0xf) << 4 | ((spd->t_cke) & 0xf); |
| 391 | |
| 392 | spd_cb->emif_cfg.sdtim4 = (spd->t_csta & 0xf) << 28 | |
| 393 | ((spd->t_ckesr - 1) & 0xf) << 24 | |
| 394 | ((spd->t_zqcs - 1) & 0xff) << 16 | |
| 395 | ((spd->t_rfc - 1) & 0x3ff) << 4 | |
| 396 | (spd->t_ras_max & 0xf); |
| 397 | |
| 398 | spd_cb->emif_cfg.sdrfc = (spd->refresh_rate - 1) & 0xffff; |
| 399 | |
| 400 | /* TODO zqcfg value fixed ,May be required correction for K2E evm. */ |
| 401 | spd_cb->emif_cfg.zqcfg = (spd->rank == 2) ? 0xF0073200 : 0x70073200; |
| 402 | } |
| 403 | |
| 404 | static int ddr3_read_spd(ddr3_spd_eeprom_t *spd_params) |
| 405 | { |
| 406 | int ret; |
Jean-Jacques Hiblot | 1514244 | 2018-12-07 14:50:49 +0100 | [diff] [blame] | 407 | #ifndef CONFIG_DM_I2C |
Vitaly Andrianov | d9a76e7 | 2016-03-04 10:36:42 -0600 | [diff] [blame] | 408 | int old_bus; |
| 409 | |
| 410 | i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); |
| 411 | |
| 412 | old_bus = i2c_get_bus_num(); |
| 413 | i2c_set_bus_num(1); |
| 414 | |
| 415 | ret = i2c_read(0x53, 0, 1, (unsigned char *)spd_params, 256); |
| 416 | |
| 417 | i2c_set_bus_num(old_bus); |
Jean-Jacques Hiblot | 1514244 | 2018-12-07 14:50:49 +0100 | [diff] [blame] | 418 | #else |
| 419 | struct udevice *dev; |
Vitaly Andrianov | d9a76e7 | 2016-03-04 10:36:42 -0600 | [diff] [blame] | 420 | |
Jean-Jacques Hiblot | 1514244 | 2018-12-07 14:50:49 +0100 | [diff] [blame] | 421 | ret = i2c_get_chip_for_busnum(1, 0x53, 1, &dev); |
| 422 | if (!ret) |
| 423 | ret = dm_i2c_read(dev, 0, (unsigned char *)spd_params, 256); |
| 424 | #endif |
Vitaly Andrianov | d9a76e7 | 2016-03-04 10:36:42 -0600 | [diff] [blame] | 425 | if (ret) { |
| 426 | printf("Cannot read DIMM params\n"); |
| 427 | return 1; |
| 428 | } |
| 429 | |
| 430 | if (ddr3_spd_check(spd_params)) |
| 431 | return 1; |
| 432 | |
| 433 | return 0; |
| 434 | } |
| 435 | |
Vitaly Andrianov | 8efc243 | 2016-03-04 10:36:43 -0600 | [diff] [blame] | 436 | int ddr3_get_size(void) |
| 437 | { |
| 438 | ddr3_spd_eeprom_t spd_params; |
| 439 | |
| 440 | if (ddr3_read_spd(&spd_params)) |
| 441 | return 0; |
| 442 | |
| 443 | return ddr3_get_size_in_mb(&spd_params) / 1024; |
| 444 | } |
| 445 | |
Vitaly Andrianov | d9a76e7 | 2016-03-04 10:36:42 -0600 | [diff] [blame] | 446 | int ddr3_get_dimm_params_from_spd(struct ddr3_spd_cb *spd_cb) |
| 447 | { |
| 448 | struct ddr3_sodimm spd; |
| 449 | ddr3_spd_eeprom_t spd_params; |
| 450 | |
| 451 | memset(&spd, 0, sizeof(spd)); |
| 452 | |
| 453 | if (ddr3_read_spd(&spd_params)) |
| 454 | return 1; |
| 455 | |
| 456 | if (ddrtimingcalculation(&spd_params, &spd, spd_cb)) { |
| 457 | printf("Timing caclulation error\n"); |
| 458 | return 1; |
| 459 | } |
| 460 | |
| 461 | strncpy(spd_cb->dimm_name, (char *)spd_params.mpart, 18); |
| 462 | spd_cb->dimm_name[18] = '\0'; |
| 463 | |
| 464 | init_ddr3param(spd_cb, &spd); |
| 465 | |
| 466 | dump_emif_config(&spd_cb->emif_cfg); |
| 467 | dump_phy_config(&spd_cb->phy_cfg); |
| 468 | |
| 469 | return 0; |
| 470 | } |