blob: f0e795333b92e898f99953de6f1cca0f40a217ac [file] [log] [blame]
Srinath Mannam3151fdd2020-04-02 16:08:12 +05301// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2019 Broadcom
4 */
5
6#include <common.h>
7#include <dm.h>
8#include <generic-phy.h>
9#include <asm/io.h>
10#include <linux/bitops.h>
11
12/* we have up to 8 PAXB based RC. The 9th one is always PAXC */
13#define SR_NR_PCIE_PHYS 8
14
15#define PCIE_PIPEMUX_CFG_OFFSET 0x10c
16#define PCIE_PIPEMUX_SELECT_STRAP GENMASK(3, 0)
17
18#define CDRU_STRAP_DATA_LSW_OFFSET 0x5c
19#define PCIE_PIPEMUX_SHIFT 19
20#define PCIE_PIPEMUX_MASK GENMASK(3, 0)
21
22/**
23 * struct sr_pcie_phy_core - Stingray PCIe PHY core control
24 *
25 * @dev: pointer to device
26 * @base: base register of PCIe SS
27 * @cdru: CDRU base address
28 * @pipemux: pipemuex strap
29 */
30struct sr_pcie_phy_core {
31 struct udevice *dev;
32 void __iomem *base;
33 void __iomem *cdru;
34 u32 pipemux;
35};
36
37/*
38 * PCIe PIPEMUX lookup table
39 *
40 * Each array index represents a PIPEMUX strap setting
41 * The array element represents a bitmap where a set bit means the PCIe
42 * core and associated serdes has been enabled as RC and is available for use
43 */
44static const u8 pipemux_table[] = {
45 /* PIPEMUX = 0, EP 1x16 */
46 0x00,
47 /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
48 0x80,
49 /* PIPEMUX = 2, EP 4x4 */
50 0x00,
51 /* PIPEMUX = 3, RC 2x8, cores 0, 7 */
52 0x81,
53 /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */
54 0xc3,
55 /* PIPEMUX = 5, RC 8x2, all 8 cores */
56 0xff,
57 /* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */
58 0xcd,
59 /* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */
60 0xfd,
61 /* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */
62 0xf0,
63 /* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */
64 0xc0,
65 /* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */
66 0x42,
67 /* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */
68 0x3c,
69 /* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */
70 0xfc,
71 /* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */
72 0x4c,
73};
74
75/*
76 * Return true if the strap setting is valid
77 */
78static bool pipemux_strap_is_valid(u32 pipemux)
79{
80 return !!(pipemux < ARRAY_SIZE(pipemux_table));
81}
82
83/*
84 * Read the PCIe PIPEMUX from strap
85 */
86static u32 pipemux_strap_read(struct sr_pcie_phy_core *core)
87{
88 u32 pipemux;
89
90 /*
91 * Read PIPEMUX configuration register to determine the pipemux setting
92 *
93 * In the case when the value indicates using HW strap, fall back to
94 * use HW strap
95 */
96 pipemux = readl(core->base + PCIE_PIPEMUX_CFG_OFFSET);
97 pipemux &= PCIE_PIPEMUX_MASK;
98 if (pipemux == PCIE_PIPEMUX_SELECT_STRAP) {
99 pipemux = readl(core->cdru + CDRU_STRAP_DATA_LSW_OFFSET);
100 pipemux >>= PCIE_PIPEMUX_SHIFT;
101 pipemux &= PCIE_PIPEMUX_MASK;
102 }
103
104 return pipemux;
105}
106
107static int sr_pcie_phy_init(struct phy *phy)
108{
109 struct sr_pcie_phy_core *core = dev_get_priv(phy->dev);
110 unsigned int core_idx = phy->id;
111
112 debug("%s %lx\n", __func__, phy->id);
113 /*
114 * Check whether this PHY is for root complex or not. If yes, return
115 * zero so the host driver can proceed to enumeration. If not, return
116 * an error and that will force the host driver to bail out
117 */
118 if (!!((pipemux_table[core->pipemux] >> core_idx) & 0x1))
119 return 0;
120
121 return -ENODEV;
122}
123
124static int sr_pcie_phy_xlate(struct phy *phy, struct ofnode_phandle_args *args)
125{
126 debug("%s %d\n", __func__, args->args[0]);
127 if (args->args_count && args->args[0] < SR_NR_PCIE_PHYS)
128 phy->id = args->args[0];
129 else
130 return -ENODEV;
131
132 return 0;
133}
134
135static const struct phy_ops sr_pcie_phy_ops = {
136 .of_xlate = sr_pcie_phy_xlate,
137 .init = sr_pcie_phy_init,
138};
139
140static int sr_pcie_phy_probe(struct udevice *dev)
141{
142 struct sr_pcie_phy_core *core = dev_get_priv(dev);
143
144 core->dev = dev;
145
146 core->base = (void __iomem *)devfdt_get_addr_name(dev, "reg_base");
147 core->cdru = (void __iomem *)devfdt_get_addr_name(dev, "cdru_base");
148 debug("ip base %p\n", core->base);
149 debug("cdru base %p\n", core->cdru);
150
151 /* read the PCIe PIPEMUX strap setting */
152 core->pipemux = pipemux_strap_read(core);
153 if (!pipemux_strap_is_valid(core->pipemux)) {
154 pr_err("invalid PCIe PIPEMUX strap %u\n", core->pipemux);
155 return -EIO;
156 }
157 debug("%s %#x\n", __func__, core->pipemux);
158
159 pr_info("Stingray PCIe PHY driver initialized\n");
160
161 return 0;
162}
163
164static const struct udevice_id sr_pcie_phy_match_table[] = {
165 { .compatible = "brcm,sr-pcie-phy" },
166 { }
167};
168
169U_BOOT_DRIVER(sr_pcie_phy) = {
170 .name = "sr-pcie-phy",
171 .id = UCLASS_PHY,
172 .probe = sr_pcie_phy_probe,
173 .of_match = sr_pcie_phy_match_table,
174 .ops = &sr_pcie_phy_ops,
Simon Glasscaa4daa2020-12-03 16:55:18 -0700175 .plat_auto = sizeof(struct sr_pcie_phy_core),
Simon Glass41575d82020-12-03 16:55:17 -0700176 .priv_auto = sizeof(struct sr_pcie_phy_core),
Srinath Mannam3151fdd2020-04-02 16:08:12 +0530177};