blob: 034255041226079f5078e6f2d16d6f502c08eab0 [file] [log] [blame]
Alison Wang8c653122013-05-27 22:55:47 +00001/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Freescale Vybrid vf610twr board.
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Alison Wang8c653122013-05-27 22:55:47 +00007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#include <asm/arch/imx-regs.h>
13#include <config_cmd_default.h>
14
15#define CONFIG_VF610
16
17#define CONFIG_DISPLAY_CPUINFO
18#define CONFIG_DISPLAY_BOARDINFO
19
20#define CONFIG_MACH_TYPE 4146
21
22#define CONFIG_SKIP_LOWLEVEL_INIT
23
24/* Enable passing of ATAGs */
25#define CONFIG_CMDLINE_TAG
26
27#define CONFIG_CMD_FUSE
28#ifdef CONFIG_CMD_FUSE
29#define CONFIG_MXC_OCOTP
30#endif
31
32/* Size of malloc() pool */
33#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
34
35#define CONFIG_BOARD_EARLY_INIT_F
36
37#define CONFIG_FSL_LPUART
38#define LPUART_BASE UART1_BASE
39
40/* Allow to overwrite serial and ethaddr */
41#define CONFIG_ENV_OVERWRITE
42#define CONFIG_SYS_UART_PORT (1)
43#define CONFIG_BAUDRATE 115200
44
45#undef CONFIG_CMD_IMLS
46
47#define CONFIG_MMC
48#define CONFIG_FSL_ESDHC
49#define CONFIG_SYS_FSL_ESDHC_ADDR 0
50#define CONFIG_SYS_FSL_ESDHC_NUM 1
51
52#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
53
54#define CONFIG_CMD_MMC
55#define CONFIG_GENERIC_MMC
56#define CONFIG_CMD_FAT
57#define CONFIG_DOS_PARTITION
58
59#define CONFIG_CMD_PING
60#define CONFIG_CMD_DHCP
61#define CONFIG_CMD_MII
62#define CONFIG_CMD_NET
63#define CONFIG_FEC_MXC
64#define CONFIG_MII
65#define IMX_FEC_BASE ENET_BASE_ADDR
66#define CONFIG_FEC_XCV_TYPE RMII
67#define CONFIG_FEC_MXC_PHYADDR 0
68#define CONFIG_PHYLIB
69#define CONFIG_PHY_MICREL
70
Chao Fucb6d04d2014-05-06 09:13:03 +080071/* QSPI Configs*/
72#define CONFIG_FSL_QSPI
73
74#ifdef CONFIG_FSL_QSPI
75#define CONFIG_CMD_SF
76#define CONFIG_SPI_FLASH
77#define CONFIG_SPI_FLASH_SPANSION
78#define FSL_QSPI_FLASH_SIZE (1 << 24)
79#define FSL_QSPI_FLASH_NUM 2
80#define CONFIG_SYS_FSL_QSPI_LE
81#endif
82
Alison Wang1221b3d2013-06-17 15:30:38 +080083/* I2C Configs */
84#define CONFIG_CMD_I2C
tremb089d032013-09-21 18:13:36 +020085#define CONFIG_SYS_I2C
86#define CONFIG_SYS_I2C_MXC
87#define CONFIG_SYS_SPD_BUS_NUM 0
Alison Wang1221b3d2013-06-17 15:30:38 +080088
Alison Wang8c653122013-05-27 22:55:47 +000089#define CONFIG_BOOTDELAY 3
90
Otavio Salvadorca21f612013-06-28 09:52:59 -030091#define CONFIG_LOADADDR 0x82000000
Alison Wang8c653122013-05-27 22:55:47 +000092#define CONFIG_SYS_TEXT_BASE 0x3f008000
93
Otavio Salvadorca21f612013-06-28 09:52:59 -030094#define CONFIG_EXTRA_ENV_SETTINGS \
95 "script=boot.scr\0" \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -020096 "image=zImage\0" \
Otavio Salvadorca21f612013-06-28 09:52:59 -030097 "console=ttyLP1\0" \
98 "fdt_high=0xffffffff\0" \
99 "initrd_high=0xffffffff\0" \
100 "fdt_file=vf610-twr.dtb\0" \
101 "fdt_addr=0x81000000\0" \
102 "boot_fdt=try\0" \
103 "ip_dyn=yes\0" \
104 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
105 "mmcpart=1\0" \
106 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
107 "update_sd_firmware_filename=u-boot.imx\0" \
108 "update_sd_firmware=" \
109 "if test ${ip_dyn} = yes; then " \
110 "setenv get_cmd dhcp; " \
111 "else " \
112 "setenv get_cmd tftp; " \
113 "fi; " \
114 "if mmc dev ${mmcdev}; then " \
115 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
116 "setexpr fw_sz ${filesize} / 0x200; " \
117 "setexpr fw_sz ${fw_sz} + 1; " \
118 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
119 "fi; " \
120 "fi\0" \
121 "mmcargs=setenv bootargs console=${console},${baudrate} " \
122 "root=${mmcroot}\0" \
123 "loadbootscript=" \
124 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
125 "bootscript=echo Running bootscript from mmc ...; " \
126 "source\0" \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200127 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300128 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
129 "mmcboot=echo Booting from mmc ...; " \
130 "run mmcargs; " \
131 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
132 "if run loadfdt; then " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200133 "bootz ${loadaddr} - ${fdt_addr}; " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300134 "else " \
135 "if test ${boot_fdt} = try; then " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200136 "bootz; " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300137 "else " \
138 "echo WARN: Cannot load the DT; " \
139 "fi; " \
140 "fi; " \
141 "else " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200142 "bootz; " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300143 "fi;\0" \
144 "netargs=setenv bootargs console=${console},${baudrate} " \
145 "root=/dev/nfs " \
146 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
147 "netboot=echo Booting from net ...; " \
148 "run netargs; " \
149 "if test ${ip_dyn} = yes; then " \
150 "setenv get_cmd dhcp; " \
151 "else " \
152 "setenv get_cmd tftp; " \
153 "fi; " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200154 "${get_cmd} ${image}; " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300155 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
156 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200157 "bootz ${loadaddr} - ${fdt_addr}; " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300158 "else " \
159 "if test ${boot_fdt} = try; then " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200160 "bootz; " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300161 "else " \
162 "echo WARN: Cannot load the DT; " \
163 "fi; " \
164 "fi; " \
165 "else " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200166 "bootz; " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300167 "fi;\0"
168
169#define CONFIG_BOOTCOMMAND \
170 "mmc dev ${mmcdev}; if mmc rescan; then " \
171 "if run loadbootscript; then " \
172 "run bootscript; " \
173 "else " \
Otavio Salvadorc0a5b082014-01-16 19:58:06 -0200174 "if run loadimage; then " \
Otavio Salvadorca21f612013-06-28 09:52:59 -0300175 "run mmcboot; " \
176 "else run netboot; " \
177 "fi; " \
178 "fi; " \
179 "else run netboot; fi"
180
Alison Wang8c653122013-05-27 22:55:47 +0000181/* Miscellaneous configurable options */
182#define CONFIG_SYS_LONGHELP /* undef to save memory */
183#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
184#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Alison Wang8c653122013-05-27 22:55:47 +0000185#undef CONFIG_AUTO_COMPLETE
186#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
187#define CONFIG_SYS_PBSIZE \
188 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
189#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
190#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
191
192#define CONFIG_CMD_MEMTEST
193#define CONFIG_SYS_MEMTEST_START 0x80010000
194#define CONFIG_SYS_MEMTEST_END 0x87C00000
195
Otavio Salvadorca21f612013-06-28 09:52:59 -0300196#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
Alison Wang8c653122013-05-27 22:55:47 +0000197
198/*
199 * Stack sizes
200 * The stack sizes are set up in start.S using the settings below
201 */
202#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
203
204/* Physical memory map */
205#define CONFIG_NR_DRAM_BANKS 1
206#define PHYS_SDRAM (0x80000000)
207#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
208
209#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
210#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
211#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
212
213#define CONFIG_SYS_INIT_SP_OFFSET \
214 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
215#define CONFIG_SYS_INIT_SP_ADDR \
216 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
217
218/* FLASH and environment organization */
219#define CONFIG_SYS_NO_FLASH
220
221#define CONFIG_ENV_SIZE (8 * 1024)
222#define CONFIG_ENV_IS_IN_MMC
223
224#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
225#define CONFIG_SYS_MMC_ENV_DEV 0
226
227#define CONFIG_OF_LIBFDT
228#define CONFIG_CMD_BOOTZ
229
230#endif