Zhengxun | 2b157d8 | 2021-06-11 15:10:48 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Xilinx 'Clocking Wizard' driver |
| 4 | * |
| 5 | * Copyright (c) 2021 Macronix Inc. |
| 6 | * |
| 7 | * Author: Zhengxun Li <zhengxunli@mxic.com.tw> |
| 8 | */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <clk-uclass.h> |
| 12 | #include <dm.h> |
| 13 | #include <div64.h> |
| 14 | #include <dm/device_compat.h> |
| 15 | #include <linux/iopoll.h> |
| 16 | |
| 17 | #include <linux/bitfield.h> |
| 18 | |
| 19 | #define SRR 0x0 |
| 20 | |
| 21 | #define SR 0x4 |
| 22 | #define SR_LOCKED BIT(0) |
| 23 | |
| 24 | #define CCR(x) (0x200 + ((x) * 4)) |
| 25 | |
| 26 | #define FBOUT_CFG CCR(0) |
| 27 | #define FBOUT_DIV(x) (x) |
| 28 | #define FBOUT_DIV_MASK GENMASK(7, 0) |
| 29 | #define FBOUT_GET_DIV(x) FIELD_GET(FBOUT_DIV_MASK, x) |
| 30 | #define FBOUT_MUL(x) ((x) << 8) |
| 31 | #define FBOUT_MUL_MASK GENMASK(15, 8) |
| 32 | #define FBOUT_GET_MUL(x) FIELD_GET(FBOUT_MUL_MASK, x) |
| 33 | #define FBOUT_FRAC(x) ((x) << 16) |
| 34 | #define FBOUT_FRAC_MASK GENMASK(25, 16) |
| 35 | #define FBOUT_GET_FRAC(x) FIELD_GET(FBOUT_FRAC_MASK, x) |
| 36 | #define FBOUT_FRAC_EN BIT(26) |
| 37 | |
| 38 | #define FBOUT_PHASE CCR(1) |
| 39 | |
| 40 | #define OUT_CFG(x) CCR(2 + ((x) * 3)) |
| 41 | #define OUT_DIV(x) (x) |
| 42 | #define OUT_DIV_MASK GENMASK(7, 0) |
| 43 | #define OUT_GET_DIV(x) FIELD_GET(OUT_DIV_MASK, x) |
| 44 | #define OUT_FRAC(x) ((x) << 8) |
| 45 | #define OUT_GET_MASK GENMASK(17, 8) |
| 46 | #define OUT_GET_FRAC(x) FIELD_GET(OUT_GET_MASK, x) |
| 47 | #define OUT_FRAC_EN BIT(18) |
| 48 | |
| 49 | #define OUT_PHASE(x) CCR(3 + ((x) * 3)) |
| 50 | #define OUT_DUTY(x) CCR(4 + ((x) * 3)) |
| 51 | |
| 52 | #define CTRL CCR(23) |
| 53 | #define CTRL_SEN BIT(2) |
| 54 | #define CTRL_SADDR BIT(1) |
| 55 | #define CTRL_LOAD BIT(0) |
| 56 | |
| 57 | /** |
| 58 | * struct clkwzrd - Clock wizard private data structure |
| 59 | * |
| 60 | * @base: memory base |
| 61 | * @vco_clk: voltage-controlled oscillator frequency |
| 62 | * |
| 63 | */ |
| 64 | struct clkwzd { |
| 65 | void *base; |
| 66 | u64 vco_clk; |
| 67 | }; |
| 68 | |
| 69 | struct clkwzd_plat { |
| 70 | fdt_addr_t addr; |
| 71 | }; |
| 72 | |
| 73 | static int clk_wzrd_enable(struct clk *clk) |
| 74 | { |
| 75 | struct clkwzd *priv = dev_get_priv(clk->dev); |
| 76 | int ret; |
| 77 | u32 val; |
| 78 | |
| 79 | ret = readl_poll_sleep_timeout(priv->base + SR, val, val & SR_LOCKED, |
| 80 | 1, 100); |
| 81 | if (!ret) { |
| 82 | writel(CTRL_SEN | CTRL_SADDR | CTRL_LOAD, priv->base + CTRL); |
| 83 | writel(CTRL_SADDR, priv->base + CTRL); |
| 84 | ret = readl_poll_sleep_timeout(priv->base + SR, val, |
| 85 | val & SR_LOCKED, 1, 100); |
| 86 | } |
| 87 | |
| 88 | return ret; |
| 89 | } |
| 90 | |
| 91 | static unsigned long clk_wzrd_set_rate(struct clk *clk, ulong rate) |
| 92 | { |
| 93 | struct clkwzd *priv = dev_get_priv(clk->dev); |
| 94 | u64 div; |
| 95 | u32 cfg; |
| 96 | |
| 97 | /* Get output clock divide value */ |
| 98 | div = DIV_ROUND_DOWN_ULL(priv->vco_clk * 1000, rate); |
| 99 | if (div < 1000 || div > 255999) |
| 100 | return -EINVAL; |
| 101 | |
| 102 | cfg = OUT_DIV((u32)div / 1000); |
| 103 | |
| 104 | writel(cfg, priv->base + OUT_CFG(clk->id)); |
| 105 | |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | static struct clk_ops clk_wzrd_ops = { |
| 110 | .enable = clk_wzrd_enable, |
| 111 | .set_rate = clk_wzrd_set_rate, |
| 112 | }; |
| 113 | |
| 114 | static int clk_wzrd_probe(struct udevice *dev) |
| 115 | { |
| 116 | struct clkwzd_plat *plat = dev_get_plat(dev); |
| 117 | struct clkwzd *priv = dev_get_priv(dev); |
| 118 | struct clk clk_in1; |
| 119 | u64 clock, vco_clk; |
| 120 | u32 cfg; |
| 121 | int ret; |
| 122 | |
| 123 | priv->base = (void *)plat->addr; |
| 124 | |
| 125 | ret = clk_get_by_name(dev, "clk_in1", &clk_in1); |
| 126 | if (ret < 0) { |
| 127 | dev_err(dev, "failed to get clock\n"); |
| 128 | return ret; |
| 129 | } |
| 130 | |
| 131 | clock = clk_get_rate(&clk_in1); |
| 132 | if (IS_ERR_VALUE(clock)) { |
| 133 | dev_err(dev, "failed to get rate\n"); |
| 134 | return clock; |
| 135 | } |
| 136 | |
| 137 | ret = clk_enable(&clk_in1); |
| 138 | if (ret) { |
| 139 | dev_err(dev, "failed to enable clock\n"); |
| 140 | clk_free(&clk_in1); |
| 141 | return ret; |
| 142 | } |
| 143 | |
| 144 | /* Read clock configuration registers */ |
| 145 | cfg = readl(priv->base + FBOUT_CFG); |
| 146 | |
| 147 | /* Recalculate VCO rate */ |
| 148 | if (cfg & FBOUT_FRAC_EN) |
| 149 | vco_clk = DIV_ROUND_DOWN_ULL(clock * |
| 150 | ((FBOUT_GET_MUL(cfg) * 1000) + |
| 151 | FBOUT_GET_FRAC(cfg)), |
| 152 | 1000); |
| 153 | else |
| 154 | vco_clk = clock * FBOUT_GET_MUL(cfg); |
| 155 | |
| 156 | priv->vco_clk = DIV_ROUND_DOWN_ULL(vco_clk, FBOUT_GET_DIV(cfg)); |
| 157 | |
| 158 | return 0; |
| 159 | } |
| 160 | |
| 161 | static int clk_wzrd_of_to_plat(struct udevice *dev) |
| 162 | { |
| 163 | struct clkwzd_plat *plat = dev_get_plat(dev); |
| 164 | |
| 165 | plat->addr = dev_read_addr(dev); |
| 166 | if (plat->addr == FDT_ADDR_T_NONE) |
| 167 | return -EINVAL; |
| 168 | |
| 169 | return 0; |
| 170 | } |
| 171 | |
| 172 | static const struct udevice_id clk_wzrd_ids[] = { |
| 173 | { .compatible = "xlnx,clocking-wizard" }, |
| 174 | { /* sentinel */ } |
| 175 | }; |
| 176 | |
| 177 | U_BOOT_DRIVER(clk_wzrd) = { |
| 178 | .name = "zynq-clk-wizard", |
| 179 | .id = UCLASS_CLK, |
| 180 | .of_match = clk_wzrd_ids, |
| 181 | .ops = &clk_wzrd_ops, |
| 182 | .probe = clk_wzrd_probe, |
| 183 | .of_to_plat = clk_wzrd_of_to_plat, |
| 184 | .priv_auto = sizeof(struct clkwzd), |
| 185 | .plat_auto = sizeof(struct clkwzd_plat), |
| 186 | }; |