blob: 6de83a6187d0b51a296d457778b98af2b6d813fa [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2012 Maxime Ripard
3 *
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020021 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun4i-a10.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/pinctrl/sun4i-a10.h>
51
52/ {
53 model = "Miniand Hackberry";
54 compatible = "miniand,hackberry", "allwinner,sun4i-a10";
55
56 aliases {
57 serial0 = &uart0;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63
64 reg_emac_3v3: emac-3v3 {
65 compatible = "regulator-fixed";
66 regulator-name = "emac-3v3";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
Hans de Goede860fbdd2016-08-18 20:51:12 +020069 startup-delay-us = <20000>;
Hans de Goede53ab4af2015-04-15 19:03:49 +020070 enable-active-high;
71 gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
72 };
73};
74
75&ehci0 {
76 status = "okay";
77};
78
79&ehci1 {
80 status = "okay";
81};
82
83&emac {
84 pinctrl-names = "default";
85 pinctrl-0 = <&emac_pins_a>;
86 phy = <&phy0>;
87 status = "okay";
88};
89
Hans de Goede8b1ba942015-06-02 15:53:40 +020090&emac_sram {
91 status = "okay";
92};
93
Hans de Goede53ab4af2015-04-15 19:03:49 +020094&ir0 {
95 pinctrl-names = "default";
Hans de Goede8b1ba942015-06-02 15:53:40 +020096 pinctrl-0 = <&ir0_rx_pins_a>;
Hans de Goede53ab4af2015-04-15 19:03:49 +020097 status = "okay";
98};
99
100&mdio {
101 phy-supply = <&reg_emac_3v3>;
102 status = "okay";
103
104 phy0: ethernet-phy@0 {
105 reg = <0>;
106 };
107};
108
109&mmc0 {
110 pinctrl-names = "default";
111 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
112 vmmc-supply = <&reg_vcc3v3>;
113 bus-width = <4>;
114 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
115 cd-inverted;
116 status = "okay";
117};
118
119&ohci0 {
120 status = "okay";
121};
122
123&ohci1 {
124 status = "okay";
125};
126
127&pio {
128 pinctrl-names = "default";
129 pinctrl-0 = <&hackberry_hogs>;
130
131 hackberry_hogs: hogs@0 {
132 allwinner,pins = "PH19";
133 allwinner,function = "gpio_out";
134 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
135 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
136 };
137
138 usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
139 allwinner,pins = "PH12";
140 allwinner,function = "gpio_out";
141 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
142 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
143 };
144};
145
146&reg_usb1_vbus {
147 status = "okay";
148};
149
150&reg_usb2_vbus {
151 pinctrl-0 = <&usb2_vbus_pin_hackberry>;
152 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
153 status = "okay";
154};
155
156&usbphy {
157 usb1_vbus-supply = <&reg_usb1_vbus>;
158 usb2_vbus-supply = <&reg_usb2_vbus>;
159 status = "okay";
160};
161
162&uart0 {
163 pinctrl-names = "default";
164 pinctrl-0 = <&uart0_pins_a>;
165 status = "okay";
166};