blob: 66e6e511e256a8ba703ed3126e5b457b3038e802 [file] [log] [blame]
Wolfgang Denk9d407992006-07-10 23:07:28 +02001#include <common.h>
2#include <mpc8xx.h>
3#include <pcmcia.h>
4
5#undef CONFIG_PCMCIA
6
Jon Loeliger3fe00102007-07-09 18:38:39 -05007#if defined(CONFIG_CMD_PCMCIA)
Wolfgang Denk9d407992006-07-10 23:07:28 +02008#define CONFIG_PCMCIA
9#endif
10
Jon Loeliger3fe00102007-07-09 18:38:39 -050011#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
Wolfgang Denk9d407992006-07-10 23:07:28 +020012#define CONFIG_PCMCIA
13#endif
14
15#ifdef CONFIG_PCMCIA
16
17/* some sane bit macros */
18#define _BD(_b) (1U << (31-(_b)))
19#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
20
21#define _BW(_b) (1U << (15-(_b)))
22#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
23
24#define _BB(_b) (1U << (7-(_b)))
25#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
26
27#define _B(_b) _BD(_b)
28#define _BR(_l, _h) _BDR(_l, _h)
29
30#define PCMCIA_BOARD_MSG "NETTA"
31
32static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) };
33
34static void cfg_vppd(int no)
35{
36 volatile immap_t *immap = (immap_t *)CFG_IMMR;
37 unsigned short mask;
38
39 if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
40 return;
41
42 mask = vppd_masks[no];
43
44 immap->im_ioport.iop_papar &= ~mask;
45 immap->im_ioport.iop_paodr &= ~mask;
46 immap->im_ioport.iop_padir |= mask;
47}
48
49static void set_vppd(int no, int what)
50{
51 volatile immap_t *immap = (immap_t *)CFG_IMMR;
52 unsigned short mask;
53
54 if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
55 return;
56
57 mask = vppd_masks[no];
58
59 if (what)
60 immap->im_ioport.iop_padat |= mask;
61 else
62 immap->im_ioport.iop_padat &= ~mask;
63}
64
65static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) };
66
67static void cfg_vccd(int no)
68{
69 volatile immap_t *immap = (immap_t *)CFG_IMMR;
70 unsigned short mask;
71
72 if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
73 return;
74
75 mask = vccd_masks[no];
76
77 immap->im_ioport.iop_papar &= ~mask;
78 immap->im_ioport.iop_paodr &= ~mask;
79 immap->im_ioport.iop_padir |= mask;
80}
81
82static void set_vccd(int no, int what)
83{
84 volatile immap_t *immap = (immap_t *)CFG_IMMR;
85 unsigned short mask;
86
87 if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
88 return;
89
90 mask = vccd_masks[no];
91
92 if (what)
93 immap->im_ioport.iop_padat |= mask;
94 else
95 immap->im_ioport.iop_padat &= ~mask;
96}
97
98static const unsigned short oc_mask = _BW(8);
99
100static void cfg_oc(void)
101{
102 volatile immap_t *immap = (immap_t *)CFG_IMMR;
103 unsigned short mask = oc_mask;
104
105 immap->im_ioport.iop_pcdir &= ~mask;
106 immap->im_ioport.iop_pcso &= ~mask;
107 immap->im_ioport.iop_pcint &= ~mask;
108 immap->im_ioport.iop_pcpar &= ~mask;
109}
110
111static int get_oc(void)
112{
113 volatile immap_t *immap = (immap_t *)CFG_IMMR;
114 unsigned short mask = oc_mask;
115 int what;
116
117 what = !!(immap->im_ioport.iop_pcdat & mask);;
118 return what;
119}
120
121static const unsigned short shdn_mask = _BW(12);
122
123static void cfg_shdn(void)
124{
125 volatile immap_t *immap = (immap_t *)CFG_IMMR;
126 unsigned short mask;
127
128 mask = shdn_mask;
129
130 immap->im_ioport.iop_papar &= ~mask;
131 immap->im_ioport.iop_paodr &= ~mask;
132 immap->im_ioport.iop_padir |= mask;
133}
134
135static void set_shdn(int what)
136{
137 volatile immap_t *immap = (immap_t *)CFG_IMMR;
138 unsigned short mask;
139
140 mask = shdn_mask;
141
142 if (what)
143 immap->im_ioport.iop_padat |= mask;
144 else
145 immap->im_ioport.iop_padat &= ~mask;
146}
147
148static void cfg_ports (void)
149{
150 volatile immap_t *immap;
151 volatile cpm8xx_t *cp;
152
153 immap = (immap_t *)CFG_IMMR;
154 cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
155
156
157 cfg_vppd(0); cfg_vppd(1); /* VPPD0,VPPD1 VAVPP => Hi-Z */
158 cfg_vccd(0); cfg_vccd(1); /* 3V and 5V off */
159 cfg_shdn();
160 cfg_oc();
161
162 /*
163 * Configure Port A for TPS2211 PC-Card Power-Interface Switch
164 *
165 * Switch off all voltages, assert shutdown
166 */
167 set_vppd(0, 1); set_vppd(1, 1);
168 set_vccd(0, 0); set_vccd(1, 0);
169 set_shdn(1);
170
171 udelay(100000);
172}
173
174int pcmcia_hardware_enable(int slot)
175{
176 volatile immap_t *immap;
177 volatile cpm8xx_t *cp;
178 volatile pcmconf8xx_t *pcmp;
179 volatile sysconf8xx_t *sysp;
180 uint reg, pipr, mask;
181 int i;
182
183 debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
184
185 udelay(10000);
186
187 immap = (immap_t *)CFG_IMMR;
188 sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
189 pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
190 cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
191
192 /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
193 cfg_ports ();
194
195 /* clear interrupt state, and disable interrupts */
196 pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
197 pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
198
199 /*
200 * Disable interrupts, DMA, and PCMCIA buffers
201 * (isolate the interface) and assert RESET signal
202 */
203 debug ("Disable PCMCIA buffers and assert RESET\n");
204 reg = 0;
205 reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
206 reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
207 PCMCIA_PGCRX(_slot_) = reg;
208
209 udelay(500);
210
211 /*
212 * Make sure there is a card in the slot, then configure the interface.
213 */
214 udelay(10000);
215 debug ("[%d] %s: PIPR(%p)=0x%x\n",
216 __LINE__,__FUNCTION__,
217 &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
218 if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
219 printf (" No Card found\n");
220 return (1);
221 }
222
223 /*
224 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
225 */
226 mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
227 pipr = pcmp->pcmc_pipr;
228 debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
229 pipr,
230 (reg&PCMCIA_VS1(slot))?"n":"ff",
231 (reg&PCMCIA_VS2(slot))?"n":"ff");
232
233 if ((pipr & mask) == mask) {
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200234 set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
235 set_vccd(0, 0); set_vccd(1, 1); /* 5V on, 3V off */
Wolfgang Denk9d407992006-07-10 23:07:28 +0200236 puts (" 5.0V card found: ");
237 } else {
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200238 set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
239 set_vccd(0, 1); set_vccd(1, 0); /* 5V off, 3V on */
Wolfgang Denk9d407992006-07-10 23:07:28 +0200240 puts (" 3.3V card found: ");
241 }
242
243 /* Wait 500 ms; use this to check for over-current */
244 for (i=0; i<5000; ++i) {
245 if (!get_oc()) {
246 printf (" *** Overcurrent - Safety shutdown ***\n");
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200247 set_vccd(0, 0); set_vccd(1, 0); /* VAVPP => Hi-Z */
Wolfgang Denk9d407992006-07-10 23:07:28 +0200248 return (1);
249 }
250 udelay (100);
251 }
252
253 debug ("Enable PCMCIA buffers and stop RESET\n");
254 reg = PCMCIA_PGCRX(_slot_);
255 reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
256 reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
257 PCMCIA_PGCRX(_slot_) = reg;
258
259 udelay(250000); /* some cards need >150 ms to come up :-( */
260
261 debug ("# hardware_enable done\n");
262
263 return (0);
264}
265
266
Jon Loeliger3fe00102007-07-09 18:38:39 -0500267#if defined(CONFIG_CMD_PCMCIA)
Wolfgang Denk9d407992006-07-10 23:07:28 +0200268int pcmcia_hardware_disable(int slot)
269{
270 volatile immap_t *immap;
271 volatile pcmconf8xx_t *pcmp;
272 u_long reg;
273
274 debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
275
276 immap = (immap_t *)CFG_IMMR;
277 pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
278
279 /* Configure PCMCIA General Control Register */
280 debug ("Disable PCMCIA buffers and assert RESET\n");
281 reg = 0;
282 reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
283 reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
284 PCMCIA_PGCRX(_slot_) = reg;
285
286 /* All voltages off / Hi-Z */
287 set_vppd(0, 1); set_vppd(1, 1);
288 set_vccd(0, 1); set_vccd(1, 1);
289
290 udelay(10000);
291
292 return (0);
293}
Jon Loeligerd39b5742007-07-10 10:48:22 -0500294#endif
Wolfgang Denk9d407992006-07-10 23:07:28 +0200295
296
297int pcmcia_voltage_set(int slot, int vcc, int vpp)
298{
299 volatile immap_t *immap;
300 volatile cpm8xx_t *cp;
301 volatile pcmconf8xx_t *pcmp;
302 u_long reg;
303 ushort sreg;
304
305 debug ("voltage_set: "
306 PCMCIA_BOARD_MSG
307 " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
308 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
309
310 immap = (immap_t *)CFG_IMMR;
311 cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
312 pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
313 /*
314 * Disable PCMCIA buffers (isolate the interface)
315 * and assert RESET signal
316 */
317 debug ("Disable PCMCIA buffers and assert RESET\n");
318 reg = PCMCIA_PGCRX(_slot_);
319 reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
320 reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
321 PCMCIA_PGCRX(_slot_) = reg;
322 udelay(500);
323
324 /*
325 * Configure Port C pins for
326 * 5 Volts Enable and 3 Volts enable,
327 * Turn all power pins to Hi-Z
328 */
329 debug ("PCMCIA power OFF\n");
330 cfg_ports (); /* Enables switch, but all in Hi-Z */
331
332 sreg = immap->im_ioport.iop_pcdat;
333 set_vppd(0, 1); set_vppd(1, 1);
334
335 switch(vcc) {
336 case 0:
337 break; /* Switch off */
338
339 case 33:
340 set_vccd(0, 1); set_vccd(1, 0);
341 break;
342
343 case 50:
344 set_vccd(0, 0); set_vccd(1, 1);
345 break;
346
347 default:
348 goto done;
349 }
350
351 /* Checking supported voltages */
352
353 debug ("PIPR: 0x%x --> %s\n",
354 pcmp->pcmc_pipr,
355 (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
356
357done:
358 debug ("Enable PCMCIA buffers and stop RESET\n");
359 reg = PCMCIA_PGCRX(_slot_);
360 reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
361 reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
362 PCMCIA_PGCRX(_slot_) = reg;
363 udelay(500);
364
365 debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
366 slot+'A');
367 return (0);
368}
369
370#endif /* CONFIG_PCMCIA */