Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / cf39d0c29dcf332d7055d0545fc95e3379d91a62 / . / arch / arm / dts / imx6qdl-gw5910.dtsi
blob: 446c1043a7687ecea851d3554fe20c53b2b6140b [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright 2019 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11 /* these are used by bootloader for disabling nodes */
12 aliases {
13 led0 = &led0;
14 led1 = &led1;
15 led2 = &led2;
Tim Harvey19a387f2021-03-01 14:33:35 -0800[diff] [blame]16 mmc0 = &usdhc3;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]17 };
18
19 chosen {
20 stdout-path = &uart2;
21 };
22
23 memory@10000000 {
24 device_type = "memory";
25 reg = <0x10000000 0x20000000>;
26 };
27
28 gpio-keys {
29 compatible = "gpio-keys";
30 #address-cells = <1>;
31 #size-cells = <0>;
32
33 user-pb {
34 label = "user_pb";
35 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
36 linux,code = <BTN_0>;
37 };
38
39 user-pb1x {
40 label = "user_pb1x";
41 linux,code = <BTN_1>;
42 interrupt-parent = <&gsc>;
43 interrupts = <0>;
44 };
45
46 key-erased {
47 label = "key-erased";
48 linux,code = <BTN_2>;
49 interrupt-parent = <&gsc>;
50 interrupts = <1>;
51 };
52
53 eeprom-wp {
54 label = "eeprom_wp";
55 linux,code = <BTN_3>;
56 interrupt-parent = <&gsc>;
57 interrupts = <2>;
58 };
59
60 tamper {
61 label = "tamper";
62 linux,code = <BTN_4>;
63 interrupt-parent = <&gsc>;
64 interrupts = <5>;
65 };
66
67 switch-hold {
68 label = "switch_hold";
69 linux,code = <BTN_5>;
70 interrupt-parent = <&gsc>;
71 interrupts = <7>;
72 };
73 };
74
75 leds {
76 compatible = "gpio-leds";
77 pinctrl-names = "default";
78 pinctrl-0 = <&pinctrl_gpio_leds>;
79
80 led0: user1 {
81 label = "user1";
82 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
83 default-state = "on";
84 linux,default-trigger = "heartbeat";
85 };
86
87 led1: user2 {
88 label = "user2";
89 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
90 default-state = "off";
91 };
92
93 led2: user3 {
94 label = "user3";
95 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
96 default-state = "off";
97 };
98 };
99
100 pps {
101 compatible = "pps-gpio";
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_pps>;
104 gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
105 status = "okay";
106 };
107
108 reg_3p3v: regulator-3p3v {
109 compatible = "regulator-fixed";
110 regulator-name = "3P3V";
111 regulator-min-microvolt = <3300000>;
112 regulator-max-microvolt = <3300000>;
113 regulator-always-on;
114 };
115
116 reg_5p0v: regulator-5p0v {
117 compatible = "regulator-fixed";
118 regulator-name = "5P0V";
119 regulator-min-microvolt = <5000000>;
120 regulator-max-microvolt = <5000000>;
121 regulator-always-on;
122 };
123
124 reg_wl: regulator-wl {
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_reg_wl>;
127 compatible = "regulator-fixed";
128 regulator-name = "wl";
129 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
130 startup-delay-us = <100>;
131 enable-active-high;
132 regulator-min-microvolt = <3300000>;
133 regulator-max-microvolt = <3300000>;
134 };
135};
136
137
138&ecspi3 {
139 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
140 pinctrl-names = "default";
141 pinctrl-0 = <&pinctrl_ecspi3>;
142 status = "okay";
143};
144
145&fec {
146 pinctrl-names = "default";
147 pinctrl-0 = <&pinctrl_enet>;
148 phy-mode = "rgmii-id";
Tim Harveycd18f1e2021-05-03 11:21:27 -0700[diff] [blame]149 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
150 phy-reset-duration = <10>;
151 phy-reset-post-delay = <100>;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]152 status = "okay";
153};
154
155&gpmi {
156 pinctrl-names = "default";
157 pinctrl-0 = <&pinctrl_gpmi_nand>;
158 status = "okay";
159};
160
161&i2c1 {
162 clock-frequency = <100000>;
163 pinctrl-names = "default";
164 pinctrl-0 = <&pinctrl_i2c1>;
165 status = "okay";
166
167 gsc: gsc@20 {
168 compatible = "gw,gsc";
169 reg = <0x20>;
170 interrupt-parent = <&gpio1>;
171 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
172 interrupt-controller;
173 #interrupt-cells = <1>;
174 #size-cells = <0>;
175
176 adc {
177 compatible = "gw,gsc-adc";
178 #address-cells = <1>;
179 #size-cells = <0>;
180
181 channel@6 {
182 gw,mode = <0>;
183 reg = <0x06>;
184 label = "temp";
185 };
186
187 channel@8 {
188 gw,mode = <3>;
189 reg = <0x08>;
190 label = "vdd_bat";
191 };
192
193 channel@82 {
194 gw,mode = <2>;
195 reg = <0x82>;
196 label = "vdd_vin";
197 gw,voltage-divider-ohms = <22100 1000>;
198 gw,voltage-offset-microvolt = <800000>;
199 };
200
201 channel@84 {
202 gw,mode = <2>;
203 reg = <0x84>;
204 label = "vdd_5p0";
205 gw,voltage-divider-ohms = <22100 10000>;
206 };
207
208 channel@86 {
209 gw,mode = <2>;
210 reg = <0x86>;
211 label = "vdd_3p3";
212 gw,voltage-divider-ohms = <10000 10000>;
213 };
214
215 channel@88 {
216 gw,mode = <2>;
217 reg = <0x88>;
218 label = "vdd_2p5";
219 gw,voltage-divider-ohms = <10000 10000>;
220 };
221
222 channel@8c {
223 gw,mode = <2>;
224 reg = <0x8c>;
225 label = "vdd_3p0";
226 };
227
228 channel@8e {
229 gw,mode = <2>;
230 reg = <0x8e>;
231 label = "vdd_arm";
232 };
233
234 channel@90 {
235 gw,mode = <2>;
236 reg = <0x90>;
237 label = "vdd_soc";
238 };
239
240 channel@92 {
241 gw,mode = <2>;
242 reg = <0x92>;
243 label = "vdd_1p5";
244 };
245
246 channel@98 {
247 gw,mode = <2>;
248 reg = <0x98>;
249 label = "vdd_1p8";
250 };
251
252 channel@9a {
253 gw,mode = <2>;
254 reg = <0x9a>;
255 label = "vdd_1p0";
256 gw,voltage-divider-ohms = <10000 10000>;
257 };
258
259 channel@9c {
260 gw,mode = <2>;
261 reg = <0x9c>;
262 label = "vdd_an1";
263 gw,voltage-divider-ohms = <10000 10000>;
264 };
265
266 channel@a2 {
267 gw,mode = <2>;
268 reg = <0xa2>;
269 label = "vdd_gsc";
270 gw,voltage-divider-ohms = <10000 10000>;
271 };
272 };
273 };
274
275 gsc_gpio: gpio@23 {
276 compatible = "nxp,pca9555";
277 reg = <0x23>;
278 gpio-controller;
279 #gpio-cells = <2>;
280 interrupt-parent = <&gsc>;
281 interrupts = <4>;
282 };
283
284 eeprom@50 {
285 compatible = "atmel,24c02";
286 reg = <0x50>;
287 pagesize = <16>;
288 };
289
290 eeprom@51 {
291 compatible = "atmel,24c02";
292 reg = <0x51>;
293 pagesize = <16>;
294 };
295
296 eeprom@52 {
297 compatible = "atmel,24c02";
298 reg = <0x52>;
299 pagesize = <16>;
300 };
301
302 eeprom@53 {
303 compatible = "atmel,24c02";
304 reg = <0x53>;
305 pagesize = <16>;
306 };
307
308 rtc@68 {
309 compatible = "dallas,ds1672";
310 reg = <0x68>;
311 };
312};
313
314&i2c2 {
315 clock-frequency = <100000>;
316 pinctrl-names = "default";
317 pinctrl-0 = <&pinctrl_i2c2>;
318 status = "okay";
319};
320
321&i2c3 {
322 clock-frequency = <100000>;
323 pinctrl-names = "default";
324 pinctrl-0 = <&pinctrl_i2c3>;
325 status = "okay";
326
327 accel@19 {
328 pinctrl-names = "default";
329 pinctrl-0 = <&pinctrl_accel>;
330 compatible = "st,lis2de12";
331 reg = <0x19>;
332 st,drdy-int-pin = <1>;
333 interrupt-parent = <&gpio7>;
334 interrupts = <13 0>;
335 interrupt-names = "INT1";
336 };
337};
338
339&pcie {
340 pinctrl-names = "default";
341 pinctrl-0 = <&pinctrl_pcie>;
342 reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
343 status = "okay";
344};
345
346&pwm2 {
347 pinctrl-names = "default";
348 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
349 status = "disabled";
350};
351
352&pwm3 {
353 pinctrl-names = "default";
354 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
355 status = "disabled";
356};
357
358/* off-board RS232 */
359&uart1 {
360 pinctrl-names = "default";
361 pinctrl-0 = <&pinctrl_uart1>;
362 status = "okay";
363};
364
365/* serial console */
366&uart2 {
367 pinctrl-names = "default";
368 pinctrl-0 = <&pinctrl_uart2>;
369 status = "okay";
370};
371
372/* cc1352 */
373&uart3 {
374 pinctrl-names = "default";
375 pinctrl-0 = <&pinctrl_uart3>;
376 uart-has-rtscts;
377 status = "okay";
378};
379
380/* Sterling-LWB Bluetooth */
381&uart4 {
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
384 uart-has-rtscts;
385 status = "okay";
386
387 bluetooth {
388 compatible = "brcm,bcm4330-bt";
389 shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
390 };
391};
392
393/* GPS */
394&uart5 {
395 pinctrl-names = "default";
396 pinctrl-0 = <&pinctrl_uart5>;
397 status = "okay";
398};
399
400&usbotg {
401 vbus-supply = <&reg_5p0v>;
402 pinctrl-names = "default";
403 pinctrl-0 = <&pinctrl_usbotg>;
404 disable-over-current;
Tim Harvey13acc632021-03-01 14:33:31 -0800[diff] [blame]405 dr_mode = "host";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]406 status = "okay";
407};
408
409&usbh1 {
410 status = "okay";
411};
412
413/* Sterling-LWB SDIO WiFi */
414&usdhc2 {
415 pinctrl-names = "default";
416 pinctrl-0 = <&pinctrl_usdhc2>;
417 vmmc-supply = <&reg_wl>;
418 non-removable;
419 bus-width = <4>;
420 status = "okay";
421};
422
423&usdhc3 {
424 pinctrl-names = "default", "state_100mhz", "state_200mhz";
425 pinctrl-0 = <&pinctrl_usdhc3>;
426 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
427 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
428 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
429 vmmc-supply = <&reg_3p3v>;
430 status = "okay";
431};
432
433&wdog1 {
434 pinctrl-names = "default";
435 pinctrl-0 = <&pinctrl_wdog>;
436 fsl,ext-reset-output;
437};
438
439&iomuxc {
440 pinctrl_accel: accelmuxgrp {
441 fsl,pins = <
442 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
443 >;
444 };
445
446 pinctrl_bten: btengrp {
447 fsl,pins = <
448 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
449 >;
450 };
451
452 pinctrl_ecspi3: escpi3grp {
453 fsl,pins = <
454 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
455 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
456 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
457 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
458 >;
459 };
460
461 pinctrl_enet: enetgrp {
462 fsl,pins = <
463 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
464 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
465 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
466 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
467 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
468 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
469 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
470 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
471 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
472 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
473 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
474 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
475 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
476 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
477 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
478 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
479 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
480 >;
481 };
482
483 pinctrl_gpio_leds: gpioledsgrp {
484 fsl,pins = <
485 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
486 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
487 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
488 >;
489 };
490
491 pinctrl_gpmi_nand: gpminandgrp {
492 fsl,pins = <
493 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
494 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
495 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
496 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
497 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
498 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
499 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
500 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
501 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
502 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
503 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
504 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
505 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
506 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
507 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
508 >;
509 };
510
511 pinctrl_i2c1: i2c1grp {
512 fsl,pins = <
513 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
514 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
515 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
516 >;
517 };
518
519 pinctrl_i2c2: i2c2grp {
520 fsl,pins = <
521 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
522 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
523 >;
524 };
525
526 pinctrl_i2c3: i2c3grp {
527 fsl,pins = <
528 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
529 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
530 >;
531 };
532
533 pinctrl_pcie: pciegrp {
534 fsl,pins = <
535 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
536 >;
537 };
538
539 pinctrl_pps: ppsgrp {
540 fsl,pins = <
541 MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1
542 >;
543 };
544
545 pinctrl_pwm2: pwm2grp {
546 fsl,pins = <
547 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
548 >;
549 };
550
551 pinctrl_pwm3: pwm3grp {
552 fsl,pins = <
553 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
554 >;
555 };
556
557 pinctrl_reg_wl: regwlgrp {
558 fsl,pins = <
559 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
560 >;
561 };
562
563 pinctrl_uart1: uart1grp {
564 fsl,pins = <
565 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
566 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
567 >;
568 };
569
570 pinctrl_uart2: uart2grp {
571 fsl,pins = <
572 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
573 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
574 >;
575 };
576
577 pinctrl_uart3: uart3grp {
578 fsl,pins = <
579 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
580 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
581 MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1
582 MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
583 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */
584 MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */
585 MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */
586 MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */
587 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */
588 MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */
589 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */
590 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */
591 >;
592 };
593
594 pinctrl_uart4: uart4grp {
595 fsl,pins = <
596 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
597 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
598 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
599 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
600 >;
601 };
602
603 pinctrl_uart5: uart5grp {
604 fsl,pins = <
605 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
606 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
607 >;
608 };
609
610 pinctrl_usbotg: usbotggrp {
611 fsl,pins = <
612 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
613 >;
614 };
615
616 pinctrl_usdhc2: usdhc2grp {
617 fsl,pins = <
618 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
619 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
620 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
621 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
622 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
623 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
624 >;
625 };
626
627 pinctrl_usdhc3: usdhc3grp {
628 fsl,pins = <
629 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
630 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
631 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
632 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
633 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
634 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
635 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
636 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
637 >;
638 };
639
640 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
641 fsl,pins = <
642 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
643 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
644 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
645 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
646 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
647 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
648 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
649 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
650 >;
651 };
652
653 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
654 fsl,pins = <
655 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
656 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
657 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
658 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
659 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
660 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
661 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
662 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
663 >;
664 };
665
666 pinctrl_wdog: wdoggrp {
667 fsl,pins = <
668 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
669 >;
670 };
671};