Aswath Govindraju | 05d441a | 2022-01-25 20:56:41 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "k3-j721s2.dtsi" |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | |
| 11 | / { |
| 12 | memory@80000000 { |
| 13 | device_type = "memory"; |
| 14 | /* 16 GB RAM */ |
| 15 | reg = <0x00 0x80000000 0x00 0x80000000>, |
| 16 | <0x08 0x80000000 0x03 0x80000000>; |
| 17 | }; |
| 18 | |
| 19 | reserved_memory: reserved-memory { |
| 20 | #address-cells = <2>; |
| 21 | #size-cells = <2>; |
| 22 | ranges; |
| 23 | |
| 24 | secure_ddr: optee@9e800000 { |
| 25 | reg = <0x00 0x9e800000 0x00 0x01800000>; |
| 26 | alignment = <0x1000>; |
| 27 | no-map; |
| 28 | }; |
| 29 | |
| 30 | }; |
| 31 | |
| 32 | transceiver0: can-phy0 { |
| 33 | /* standby pin has been grounded by default */ |
| 34 | compatible = "ti,tcan1042"; |
| 35 | #phy-cells = <0>; |
| 36 | max-bitrate = <5000000>; |
| 37 | }; |
| 38 | }; |
| 39 | |
| 40 | &main_pmx0 { |
| 41 | main_i2c0_pins_default: main-i2c0-pins-default { |
| 42 | pinctrl-single,pins = < |
| 43 | J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */ |
| 44 | J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */ |
| 45 | >; |
| 46 | }; |
| 47 | |
| 48 | main_mcan16_pins_default: main-mcan16-pins-default { |
| 49 | pinctrl-single,pins = < |
| 50 | J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */ |
| 51 | J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */ |
| 52 | >; |
| 53 | }; |
| 54 | }; |
| 55 | |
| 56 | &main_i2c0 { |
| 57 | pinctrl-names = "default"; |
| 58 | pinctrl-0 = <&main_i2c0_pins_default>; |
| 59 | clock-frequency = <400000>; |
| 60 | |
| 61 | exp_som: gpio@21 { |
| 62 | compatible = "ti,tca6408"; |
| 63 | reg = <0x21>; |
| 64 | gpio-controller; |
| 65 | #gpio-cells = <2>; |
| 66 | gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0", |
| 67 | "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1", |
| 68 | "GPIO_RGMII1_RST", "GPIO_eDP_ENABLE", |
| 69 | "GPIO_LIN_EN", "CAN_STB"; |
| 70 | }; |
| 71 | }; |
| 72 | |
| 73 | &main_mcan16 { |
| 74 | pinctrl-0 = <&main_mcan16_pins_default>; |
| 75 | pinctrl-names = "default"; |
| 76 | phys = <&transceiver0>; |
| 77 | }; |
| 78 | |
| 79 | &mailbox0_cluster0 { |
| 80 | status = "disabled"; |
| 81 | }; |
| 82 | |
| 83 | &mailbox0_cluster1 { |
| 84 | status = "disabled"; |
| 85 | }; |
| 86 | |
| 87 | &mailbox0_cluster2 { |
| 88 | status = "disabled"; |
| 89 | }; |
| 90 | |
| 91 | &mailbox0_cluster3 { |
| 92 | status = "disabled"; |
| 93 | }; |
| 94 | |
| 95 | &mailbox0_cluster4 { |
| 96 | status = "disabled"; |
| 97 | }; |
| 98 | |
| 99 | &mailbox0_cluster5 { |
| 100 | status = "disabled"; |
| 101 | }; |
| 102 | |
| 103 | &mailbox0_cluster6 { |
| 104 | status = "disabled"; |
| 105 | }; |
| 106 | |
| 107 | &mailbox0_cluster7 { |
| 108 | status = "disabled"; |
| 109 | }; |
| 110 | |
| 111 | &mailbox0_cluster8 { |
| 112 | status = "disabled"; |
| 113 | }; |
| 114 | |
| 115 | &mailbox0_cluster9 { |
| 116 | status = "disabled"; |
| 117 | }; |
| 118 | |
| 119 | &mailbox0_cluster10 { |
| 120 | status = "disabled"; |
| 121 | }; |
| 122 | |
| 123 | &mailbox0_cluster11 { |
| 124 | status = "disabled"; |
| 125 | }; |
| 126 | |
| 127 | &mailbox1_cluster0 { |
| 128 | status = "disabled"; |
| 129 | }; |
| 130 | |
| 131 | &mailbox1_cluster1 { |
| 132 | status = "disabled"; |
| 133 | }; |
| 134 | |
| 135 | &mailbox1_cluster2 { |
| 136 | status = "disabled"; |
| 137 | }; |
| 138 | |
| 139 | &mailbox1_cluster3 { |
| 140 | status = "disabled"; |
| 141 | }; |
| 142 | |
| 143 | &mailbox1_cluster4 { |
| 144 | status = "disabled"; |
| 145 | }; |
| 146 | |
| 147 | &mailbox1_cluster5 { |
| 148 | status = "disabled"; |
| 149 | }; |
| 150 | |
| 151 | &mailbox1_cluster6 { |
| 152 | status = "disabled"; |
| 153 | }; |
| 154 | |
| 155 | &mailbox1_cluster7 { |
| 156 | status = "disabled"; |
| 157 | }; |
| 158 | |
| 159 | &mailbox1_cluster8 { |
| 160 | status = "disabled"; |
| 161 | }; |
| 162 | |
| 163 | &mailbox1_cluster9 { |
| 164 | status = "disabled"; |
| 165 | }; |
| 166 | |
| 167 | &mailbox1_cluster10 { |
| 168 | status = "disabled"; |
| 169 | }; |
| 170 | |
| 171 | &mailbox1_cluster11 { |
| 172 | status = "disabled"; |
| 173 | }; |