| David Feng | 0ae7653 | 2013-12-14 11:47:35 +0800 | [diff] [blame] | 1 | U-boot for arm64 |
| 2 | |
| 3 | Summary |
| 4 | ======= |
| 5 | No hardware platform of arm64 is available now. The u-boot is |
| 6 | simulated on Foundation Model and Fast Model for ARMv8. |
| 7 | |
| 8 | Notes |
| 9 | ===== |
| 10 | |
| 11 | 1. Currenly, u-boot run at the highest exception level processor |
| 12 | supported and jump to EL2 or optionally EL1 before enter OS. |
| 13 | |
| 14 | 2. U-boot for arm64 is compiled with AArch64-gcc. AArch64-gcc |
| 15 | use rela relocation format, a tool(tools/relocate-rela) by Scott Wood |
| 16 | is used to encode the initial addend of rela to u-boot.bin. After running, |
| 17 | the u-boot will be relocated to destination again. |
| 18 | |
| 19 | 3. Fdt should be placed at a 2-megabyte boundary and within the first 512 |
| 20 | megabytes from the start of the kernel image. So, fdt_high should be |
| 21 | defined specially. |
| 22 | Please reference linux/Documentation/arm64/booting.txt for detail. |
| 23 | |
| 24 | 4. Spin-table is used to wake up secondary processors. One location |
| 25 | (or per processor location) is defined to hold the kernel entry point |
| 26 | for secondary processors. It must be ensured that the location is |
| 27 | accessible and zero immediately after secondary processor |
| 28 | enter slave_cpu branch execution in start.S. The location address |
| 29 | is encoded in cpu node of DTS. Linux kernel store the entry point |
| 30 | of secondary processors to it and send event to wakeup secondary |
| 31 | processors. |
| 32 | Please reference linux/Documentation/arm64/booting.txt for detail. |
| 33 | |
| 34 | 5. Generic board is supported. |
| 35 | |
| 36 | 6. CONFIG_ARM64 instead of CONFIG_ARMV8 is used to distinguish aarch64 and |
| 37 | aarch32 specific codes. |
| 38 | |
| Sergey Temerkhanov | 94f7ff3 | 2015-10-14 09:55:45 -0700 | [diff] [blame] | 39 | 7. CONFIG_SYS_FULL_VA is used to enable 2-level page tables. For cores |
| 40 | supporting 64k pages it allows usage of full 48+ virtual/physical addresses |
| 41 | |
| 42 | Enabling this option requires the following ones to be defined: |
| 43 | - CONFIG_SYS_MEM_MAP - an array of 'struct mm_region' describing the |
| 44 | system memory map (start, length, attributes) |
| 45 | - CONFIG_SYS_MEM_MAP_SIZE - number of entries in CONFIG_SYS_MEM_MAP |
| 46 | - CONFIG_SYS_PTL1_ENTRIES - number of 1st level page table entries |
| 47 | - CONFIG_SYS_PTL2_ENTRIES - number of 1nd level page table entries |
| 48 | for the largest CONFIG_SYS_MEM_MAP entry |
| 49 | - CONFIG_COREID_MASK - the mask value used to get the core from the |
| 50 | MPIDR_EL1 register |
| 51 | - CONFIG_SYS_PTL2_BITS - number of bits addressed by the 2nd level |
| 52 | page tables |
| 53 | - CONFIG_SYS_BLOCK_SHIFT - number of bits addressed by a single block |
| 54 | entry from L2 page tables |
| 55 | - CONFIG_SYS_PGTABLE_SIZE - total size of the page table |
| 56 | - CONFIG_SYS_TCR_EL{1,2,3}_IPS_BITS - the IPS field of the TCR_EL{1,2,3} |
| 57 | |
| 58 | |
| 59 | |
| 60 | |
| David Feng | 0ae7653 | 2013-12-14 11:47:35 +0800 | [diff] [blame] | 61 | Contributor |
| 62 | =========== |
| Sergey Temerkhanov | 94f7ff3 | 2015-10-14 09:55:45 -0700 | [diff] [blame] | 63 | Tom Rini <trini@ti.com> |
| 64 | Scott Wood <scottwood@freescale.com> |
| 65 | York Sun <yorksun@freescale.com> |
| 66 | Simon Glass <sjg@chromium.org> |
| 67 | Sharma Bhupesh <bhupesh.sharma@freescale.com> |
| 68 | Rob Herring <robherring2@gmail.com> |
| 69 | Sergey Temerkhanov <s.temerkhanov@gmail.com> |