Kunihiko Hayashi | 9424ecd | 2019-07-05 10:03:18 +0900 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * uniphier_spi.c - Socionext UniPhier SPI driver |
| 4 | * Copyright 2019 Socionext, Inc. |
| 5 | */ |
| 6 | |
| 7 | #include <clk.h> |
| 8 | #include <common.h> |
| 9 | #include <dm.h> |
| 10 | #include <linux/bitfield.h> |
| 11 | #include <linux/io.h> |
| 12 | #include <spi.h> |
| 13 | #include <wait_bit.h> |
| 14 | |
| 15 | DECLARE_GLOBAL_DATA_PTR; |
| 16 | |
| 17 | #define SSI_CTL 0x00 |
| 18 | #define SSI_CTL_EN BIT(0) |
| 19 | |
| 20 | #define SSI_CKS 0x04 |
| 21 | #define SSI_CKS_CKRAT_MASK GENMASK(7, 0) |
| 22 | #define SSI_CKS_CKPHS BIT(14) |
| 23 | #define SSI_CKS_CKINIT BIT(13) |
| 24 | #define SSI_CKS_CKDLY BIT(12) |
| 25 | |
| 26 | #define SSI_TXWDS 0x08 |
| 27 | #define SSI_TXWDS_WDLEN_MASK GENMASK(13, 8) |
| 28 | #define SSI_TXWDS_TDTF_MASK GENMASK(7, 6) |
| 29 | #define SSI_TXWDS_DTLEN_MASK GENMASK(5, 0) |
| 30 | |
| 31 | #define SSI_RXWDS 0x0c |
| 32 | #define SSI_RXWDS_RDTF_MASK GENMASK(7, 6) |
| 33 | #define SSI_RXWDS_DTLEN_MASK GENMASK(5, 0) |
| 34 | |
| 35 | #define SSI_FPS 0x10 |
| 36 | #define SSI_FPS_FSPOL BIT(15) |
| 37 | #define SSI_FPS_FSTRT BIT(14) |
| 38 | |
| 39 | #define SSI_SR 0x14 |
| 40 | #define SSI_SR_BUSY BIT(7) |
| 41 | #define SSI_SR_TNF BIT(5) |
| 42 | #define SSI_SR_RNE BIT(0) |
| 43 | |
| 44 | #define SSI_IE 0x18 |
| 45 | |
| 46 | #define SSI_IC 0x1c |
| 47 | #define SSI_IC_TCIC BIT(4) |
| 48 | #define SSI_IC_RCIC BIT(3) |
| 49 | #define SSI_IC_RORIC BIT(0) |
| 50 | |
| 51 | #define SSI_FC 0x20 |
| 52 | #define SSI_FC_TXFFL BIT(12) |
| 53 | #define SSI_FC_TXFTH_MASK GENMASK(11, 8) |
| 54 | #define SSI_FC_RXFFL BIT(4) |
| 55 | #define SSI_FC_RXFTH_MASK GENMASK(3, 0) |
| 56 | |
| 57 | #define SSI_XDR 0x24 /* TXDR for write, RXDR for read */ |
| 58 | |
| 59 | #define SSI_FIFO_DEPTH 8U |
| 60 | |
| 61 | #define SSI_REG_TIMEOUT (CONFIG_SYS_HZ / 100) /* 10 ms */ |
| 62 | #define SSI_XFER_TIMEOUT (CONFIG_SYS_HZ) /* 1 sec */ |
| 63 | |
| 64 | #define SSI_CLK 50000000 /* internal I/O clock: 50MHz */ |
| 65 | |
| 66 | struct uniphier_spi_platdata { |
| 67 | void __iomem *base; |
| 68 | u32 frequency; /* input frequency */ |
| 69 | u32 speed_hz; |
| 70 | uint deactivate_delay_us; /* Delay to wait after deactivate */ |
| 71 | uint activate_delay_us; /* Delay to wait after activate */ |
| 72 | }; |
| 73 | |
| 74 | struct uniphier_spi_priv { |
| 75 | void __iomem *base; |
| 76 | u8 mode; |
| 77 | u8 fifo_depth; |
| 78 | u8 bits_per_word; |
| 79 | ulong last_transaction_us; /* Time of last transaction end */ |
| 80 | }; |
| 81 | |
| 82 | static void uniphier_spi_enable(struct uniphier_spi_priv *priv, int enable) |
| 83 | { |
| 84 | u32 val; |
| 85 | |
| 86 | val = readl(priv->base + SSI_CTL); |
| 87 | if (enable) |
| 88 | val |= SSI_CTL_EN; |
| 89 | else |
| 90 | val &= ~SSI_CTL_EN; |
| 91 | writel(val, priv->base + SSI_CTL); |
| 92 | } |
| 93 | |
| 94 | static void uniphier_spi_regdump(struct uniphier_spi_priv *priv) |
| 95 | { |
| 96 | pr_debug("CTL %08x\n", readl(priv->base + SSI_CTL)); |
| 97 | pr_debug("CKS %08x\n", readl(priv->base + SSI_CKS)); |
| 98 | pr_debug("TXWDS %08x\n", readl(priv->base + SSI_TXWDS)); |
| 99 | pr_debug("RXWDS %08x\n", readl(priv->base + SSI_RXWDS)); |
| 100 | pr_debug("FPS %08x\n", readl(priv->base + SSI_FPS)); |
| 101 | pr_debug("SR %08x\n", readl(priv->base + SSI_SR)); |
| 102 | pr_debug("IE %08x\n", readl(priv->base + SSI_IE)); |
| 103 | pr_debug("IC %08x\n", readl(priv->base + SSI_IC)); |
| 104 | pr_debug("FC %08x\n", readl(priv->base + SSI_FC)); |
| 105 | pr_debug("XDR %08x\n", readl(priv->base + SSI_XDR)); |
| 106 | } |
| 107 | |
| 108 | static void spi_cs_activate(struct udevice *dev) |
| 109 | { |
| 110 | struct udevice *bus = dev->parent; |
| 111 | struct uniphier_spi_platdata *plat = bus->platdata; |
| 112 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 113 | ulong delay_us; /* The delay completed so far */ |
| 114 | u32 val; |
| 115 | |
| 116 | /* If it's too soon to do another transaction, wait */ |
| 117 | if (plat->deactivate_delay_us && priv->last_transaction_us) { |
| 118 | delay_us = timer_get_us() - priv->last_transaction_us; |
| 119 | if (delay_us < plat->deactivate_delay_us) |
| 120 | udelay(plat->deactivate_delay_us - delay_us); |
| 121 | } |
| 122 | |
| 123 | val = readl(priv->base + SSI_FPS); |
| 124 | if (priv->mode & SPI_CS_HIGH) |
| 125 | val |= SSI_FPS_FSPOL; |
| 126 | else |
| 127 | val &= ~SSI_FPS_FSPOL; |
| 128 | writel(val, priv->base + SSI_FPS); |
| 129 | |
| 130 | if (plat->activate_delay_us) |
| 131 | udelay(plat->activate_delay_us); |
| 132 | } |
| 133 | |
| 134 | static void spi_cs_deactivate(struct udevice *dev) |
| 135 | { |
| 136 | struct udevice *bus = dev->parent; |
| 137 | struct uniphier_spi_platdata *plat = bus->platdata; |
| 138 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 139 | u32 val; |
| 140 | |
| 141 | val = readl(priv->base + SSI_FPS); |
| 142 | if (priv->mode & SPI_CS_HIGH) |
| 143 | val &= ~SSI_FPS_FSPOL; |
| 144 | else |
| 145 | val |= SSI_FPS_FSPOL; |
| 146 | writel(val, priv->base + SSI_FPS); |
| 147 | |
| 148 | /* Remember time of this transaction so we can honour the bus delay */ |
| 149 | if (plat->deactivate_delay_us) |
| 150 | priv->last_transaction_us = timer_get_us(); |
| 151 | } |
| 152 | |
| 153 | static int uniphier_spi_claim_bus(struct udevice *dev) |
| 154 | { |
| 155 | struct udevice *bus = dev->parent; |
| 156 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 157 | u32 val, size; |
| 158 | |
| 159 | uniphier_spi_enable(priv, false); |
| 160 | |
| 161 | /* disable interrupts */ |
| 162 | writel(0, priv->base + SSI_IE); |
| 163 | |
| 164 | /* bits_per_word */ |
| 165 | size = priv->bits_per_word; |
| 166 | val = readl(priv->base + SSI_TXWDS); |
| 167 | val &= ~(SSI_TXWDS_WDLEN_MASK | SSI_TXWDS_DTLEN_MASK); |
| 168 | val |= FIELD_PREP(SSI_TXWDS_WDLEN_MASK, size); |
| 169 | val |= FIELD_PREP(SSI_TXWDS_DTLEN_MASK, size); |
| 170 | writel(val, priv->base + SSI_TXWDS); |
| 171 | |
| 172 | val = readl(priv->base + SSI_RXWDS); |
| 173 | val &= ~SSI_RXWDS_DTLEN_MASK; |
| 174 | val |= FIELD_PREP(SSI_RXWDS_DTLEN_MASK, size); |
| 175 | writel(val, priv->base + SSI_RXWDS); |
| 176 | |
| 177 | /* reset FIFOs */ |
| 178 | val = SSI_FC_TXFFL | SSI_FC_RXFFL; |
| 179 | writel(val, priv->base + SSI_FC); |
| 180 | |
| 181 | /* FIFO threthold */ |
| 182 | val = readl(priv->base + SSI_FC); |
| 183 | val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK); |
| 184 | val |= FIELD_PREP(SSI_FC_TXFTH_MASK, priv->fifo_depth); |
| 185 | val |= FIELD_PREP(SSI_FC_RXFTH_MASK, priv->fifo_depth); |
| 186 | writel(val, priv->base + SSI_FC); |
| 187 | |
| 188 | /* clear interrupts */ |
| 189 | writel(SSI_IC_TCIC | SSI_IC_RCIC | SSI_IC_RORIC, |
| 190 | priv->base + SSI_IC); |
| 191 | |
| 192 | uniphier_spi_enable(priv, true); |
| 193 | |
| 194 | return 0; |
| 195 | } |
| 196 | |
| 197 | static int uniphier_spi_release_bus(struct udevice *dev) |
| 198 | { |
| 199 | struct udevice *bus = dev->parent; |
| 200 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 201 | |
| 202 | uniphier_spi_enable(priv, false); |
| 203 | |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static int uniphier_spi_xfer(struct udevice *dev, unsigned int bitlen, |
| 208 | const void *dout, void *din, unsigned long flags) |
| 209 | { |
| 210 | struct udevice *bus = dev->parent; |
| 211 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 212 | const u8 *tx_buf = dout; |
| 213 | u8 *rx_buf = din, buf; |
| 214 | u32 len = bitlen / 8; |
| 215 | u32 tx_len, rx_len; |
| 216 | u32 ts, status; |
| 217 | int ret = 0; |
| 218 | |
| 219 | if (bitlen % 8) { |
| 220 | dev_err(dev, "Non byte aligned SPI transfer\n"); |
| 221 | return -EINVAL; |
| 222 | } |
| 223 | |
| 224 | if (flags & SPI_XFER_BEGIN) |
| 225 | spi_cs_activate(dev); |
| 226 | |
| 227 | uniphier_spi_enable(priv, true); |
| 228 | |
| 229 | ts = get_timer(0); |
| 230 | tx_len = len; |
| 231 | rx_len = len; |
| 232 | |
| 233 | uniphier_spi_regdump(priv); |
| 234 | |
| 235 | while (tx_len || rx_len) { |
| 236 | ret = wait_for_bit_le32(priv->base + SSI_SR, SSI_SR_BUSY, false, |
| 237 | SSI_REG_TIMEOUT * 1000, false); |
| 238 | if (ret) { |
| 239 | if (ret == -ETIMEDOUT) |
| 240 | dev_err(dev, "access timeout\n"); |
| 241 | break; |
| 242 | } |
| 243 | |
| 244 | status = readl(priv->base + SSI_SR); |
| 245 | /* write the data into TX */ |
| 246 | if (tx_len && (status & SSI_SR_TNF)) { |
| 247 | buf = tx_buf ? *tx_buf++ : 0; |
| 248 | writel(buf, priv->base + SSI_XDR); |
| 249 | tx_len--; |
| 250 | } |
| 251 | |
| 252 | /* read the data from RX */ |
| 253 | if (rx_len && (status & SSI_SR_RNE)) { |
| 254 | buf = readl(priv->base + SSI_XDR); |
| 255 | if (rx_buf) |
| 256 | *rx_buf++ = buf; |
| 257 | rx_len--; |
| 258 | } |
| 259 | |
| 260 | if (get_timer(ts) >= SSI_XFER_TIMEOUT) { |
| 261 | dev_err(dev, "transfer timeout\n"); |
| 262 | ret = -ETIMEDOUT; |
| 263 | break; |
| 264 | } |
| 265 | } |
| 266 | |
| 267 | if (flags & SPI_XFER_END) |
| 268 | spi_cs_deactivate(dev); |
| 269 | |
| 270 | uniphier_spi_enable(priv, false); |
| 271 | |
| 272 | return ret; |
| 273 | } |
| 274 | |
| 275 | static int uniphier_spi_set_speed(struct udevice *bus, uint speed) |
| 276 | { |
| 277 | struct uniphier_spi_platdata *plat = bus->platdata; |
| 278 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 279 | u32 val, ckdiv; |
| 280 | |
| 281 | if (speed > plat->frequency) |
| 282 | speed = plat->frequency; |
| 283 | |
| 284 | /* baudrate */ |
| 285 | ckdiv = DIV_ROUND_UP(SSI_CLK, speed); |
| 286 | ckdiv = round_up(ckdiv, 2); |
| 287 | |
| 288 | val = readl(priv->base + SSI_CKS); |
| 289 | val &= ~SSI_CKS_CKRAT_MASK; |
| 290 | val |= ckdiv & SSI_CKS_CKRAT_MASK; |
| 291 | writel(val, priv->base + SSI_CKS); |
| 292 | |
| 293 | return 0; |
| 294 | } |
| 295 | |
| 296 | static int uniphier_spi_set_mode(struct udevice *bus, uint mode) |
| 297 | { |
| 298 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 299 | u32 val1, val2; |
| 300 | |
| 301 | /* |
| 302 | * clock setting |
| 303 | * CKPHS capture timing. 0:rising edge, 1:falling edge |
| 304 | * CKINIT clock initial level. 0:low, 1:high |
| 305 | * CKDLY clock delay. 0:no delay, 1:delay depending on FSTRT |
| 306 | * (FSTRT=0: 1 clock, FSTRT=1: 0.5 clock) |
| 307 | * |
| 308 | * frame setting |
| 309 | * FSPOL frame signal porarity. 0: low, 1: high |
| 310 | * FSTRT start frame timing |
| 311 | * 0: rising edge of clock, 1: falling edge of clock |
| 312 | */ |
| 313 | val1 = readl(priv->base + SSI_CKS); |
| 314 | val2 = readl(priv->base + SSI_FPS); |
| 315 | |
| 316 | switch (mode & (SPI_CPOL | SPI_CPHA)) { |
| 317 | case SPI_MODE_0: |
| 318 | /* CKPHS=1, CKINIT=0, CKDLY=1, FSTRT=0 */ |
| 319 | val1 |= SSI_CKS_CKPHS | SSI_CKS_CKDLY; |
| 320 | val1 &= ~SSI_CKS_CKINIT; |
| 321 | val2 &= ~SSI_FPS_FSTRT; |
| 322 | break; |
| 323 | case SPI_MODE_1: |
| 324 | /* CKPHS=0, CKINIT=0, CKDLY=0, FSTRT=1 */ |
| 325 | val1 &= ~(SSI_CKS_CKPHS | SSI_CKS_CKINIT | SSI_CKS_CKDLY); |
| 326 | val2 |= SSI_FPS_FSTRT; |
| 327 | break; |
| 328 | case SPI_MODE_2: |
| 329 | /* CKPHS=0, CKINIT=1, CKDLY=1, FSTRT=1 */ |
| 330 | val1 |= SSI_CKS_CKINIT | SSI_CKS_CKDLY; |
| 331 | val1 &= ~SSI_CKS_CKPHS; |
| 332 | val2 |= SSI_FPS_FSTRT; |
| 333 | break; |
| 334 | case SPI_MODE_3: |
| 335 | /* CKPHS=1, CKINIT=1, CKDLY=0, FSTRT=0 */ |
| 336 | val1 |= SSI_CKS_CKPHS | SSI_CKS_CKINIT; |
| 337 | val1 &= ~SSI_CKS_CKDLY; |
| 338 | val2 &= ~SSI_FPS_FSTRT; |
| 339 | break; |
| 340 | } |
| 341 | |
| 342 | writel(val1, priv->base + SSI_CKS); |
| 343 | writel(val2, priv->base + SSI_FPS); |
| 344 | |
| 345 | /* format */ |
| 346 | val1 = readl(priv->base + SSI_TXWDS); |
| 347 | val2 = readl(priv->base + SSI_RXWDS); |
| 348 | if (mode & SPI_LSB_FIRST) { |
| 349 | val1 |= FIELD_PREP(SSI_TXWDS_TDTF_MASK, 1); |
| 350 | val2 |= FIELD_PREP(SSI_RXWDS_RDTF_MASK, 1); |
| 351 | } |
| 352 | writel(val1, priv->base + SSI_TXWDS); |
| 353 | writel(val2, priv->base + SSI_RXWDS); |
| 354 | |
| 355 | priv->mode = mode; |
| 356 | |
| 357 | return 0; |
| 358 | } |
| 359 | |
| 360 | static int uniphier_spi_ofdata_to_platdata(struct udevice *bus) |
| 361 | { |
| 362 | struct uniphier_spi_platdata *plat = bus->platdata; |
| 363 | const void *blob = gd->fdt_blob; |
| 364 | int node = dev_of_offset(bus); |
| 365 | |
| 366 | plat->base = devfdt_get_addr_ptr(bus); |
| 367 | |
| 368 | plat->frequency = |
| 369 | fdtdec_get_int(blob, node, "spi-max-frequency", 12500000); |
| 370 | plat->deactivate_delay_us = |
| 371 | fdtdec_get_int(blob, node, "spi-deactivate-delay", 0); |
| 372 | plat->activate_delay_us = |
| 373 | fdtdec_get_int(blob, node, "spi-activate-delay", 0); |
| 374 | plat->speed_hz = plat->frequency / 2; |
| 375 | |
| 376 | return 0; |
| 377 | } |
| 378 | |
| 379 | static int uniphier_spi_probe(struct udevice *bus) |
| 380 | { |
| 381 | struct uniphier_spi_platdata *plat = dev_get_platdata(bus); |
| 382 | struct uniphier_spi_priv *priv = dev_get_priv(bus); |
| 383 | |
| 384 | priv->base = plat->base; |
| 385 | priv->fifo_depth = SSI_FIFO_DEPTH; |
| 386 | priv->bits_per_word = 8; |
| 387 | |
| 388 | return 0; |
| 389 | } |
| 390 | |
| 391 | static const struct dm_spi_ops uniphier_spi_ops = { |
| 392 | .claim_bus = uniphier_spi_claim_bus, |
| 393 | .release_bus = uniphier_spi_release_bus, |
| 394 | .xfer = uniphier_spi_xfer, |
| 395 | .set_speed = uniphier_spi_set_speed, |
| 396 | .set_mode = uniphier_spi_set_mode, |
| 397 | }; |
| 398 | |
| 399 | static const struct udevice_id uniphier_spi_ids[] = { |
| 400 | { .compatible = "socionext,uniphier-scssi" }, |
| 401 | { /* Sentinel */ } |
| 402 | }; |
| 403 | |
| 404 | U_BOOT_DRIVER(uniphier_spi) = { |
| 405 | .name = "uniphier_spi", |
| 406 | .id = UCLASS_SPI, |
| 407 | .of_match = uniphier_spi_ids, |
| 408 | .ops = &uniphier_spi_ops, |
| 409 | .ofdata_to_platdata = uniphier_spi_ofdata_to_platdata, |
| 410 | .platdata_auto_alloc_size = sizeof(struct uniphier_spi_platdata), |
| 411 | .priv_auto_alloc_size = sizeof(struct uniphier_spi_priv), |
| 412 | .probe = uniphier_spi_probe, |
| 413 | }; |