blob: dd784290bc6ae27fc176ca4ef075c3a3f61b1f48 [file] [log] [blame]
Sandeep Paulraj57418d22010-12-20 20:01:21 -05001/*
2 * Davinci MMC Controller Driver
3 *
4 * Copyright (C) 2010 Texas Instruments Incorporated
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Sandeep Paulraj57418d22010-12-20 20:01:21 -05007 */
8
9#include <config.h>
10#include <common.h>
11#include <command.h>
Jaehoon Chung915ffa52016-07-19 16:33:36 +090012#include <errno.h>
Sandeep Paulraj57418d22010-12-20 20:01:21 -050013#include <mmc.h>
14#include <part.h>
15#include <malloc.h>
16#include <asm/io.h>
17#include <asm/arch/sdmmc_defs.h>
18
19#define DAVINCI_MAX_BLOCKS (32)
20#define WATCHDOG_COUNT (100000)
21
22#define get_val(addr) REG(addr)
23#define set_val(addr, val) REG(addr) = (val)
24#define set_bit(addr, val) set_val((addr), (get_val(addr) | (val)))
25#define clear_bit(addr, val) set_val((addr), (get_val(addr) & ~(val)))
26
27/* Set davinci clock prescalar value based on the required clock in HZ */
28static void dmmc_set_clock(struct mmc *mmc, uint clock)
29{
30 struct davinci_mmc *host = mmc->priv;
31 struct davinci_mmc_regs *regs = host->reg_base;
32 uint clkrt, sysclk2, act_clock;
33
Pantelis Antoniou93bfd612014-03-11 19:34:20 +020034 if (clock < mmc->cfg->f_min)
35 clock = mmc->cfg->f_min;
36 if (clock > mmc->cfg->f_max)
37 clock = mmc->cfg->f_max;
Sandeep Paulraj57418d22010-12-20 20:01:21 -050038
39 set_val(&regs->mmcclk, 0);
40 sysclk2 = host->input_clk;
41 clkrt = (sysclk2 / (2 * clock)) - 1;
42
43 /* Calculate the actual clock for the divider used */
44 act_clock = (sysclk2 / (2 * (clkrt + 1)));
45
46 /* Adjust divider if actual clock exceeds the required clock */
47 if (act_clock > clock)
48 clkrt++;
49
50 /* check clock divider boundary and correct it */
51 if (clkrt > 0xFF)
52 clkrt = 0xFF;
53
54 set_val(&regs->mmcclk, (clkrt | MMCCLK_CLKEN));
55}
56
57/* Status bit wait loop for MMCST1 */
58static int
59dmmc_wait_fifo_status(volatile struct davinci_mmc_regs *regs, uint status)
60{
Heiko Schocher79b05d52011-10-30 19:15:53 +000061 uint wdog = WATCHDOG_COUNT;
62
Sandeep Paulraj57418d22010-12-20 20:01:21 -050063 while (--wdog && ((get_val(&regs->mmcst1) & status) != status))
64 udelay(10);
65
66 if (!(get_val(&regs->mmcctl) & MMCCTL_WIDTH_4_BIT))
67 udelay(100);
68
69 if (wdog == 0)
Jaehoon Chung915ffa52016-07-19 16:33:36 +090070 return -ECOMM;
Sandeep Paulraj57418d22010-12-20 20:01:21 -050071
72 return 0;
73}
74
75/* Busy bit wait loop for MMCST1 */
76static int dmmc_busy_wait(volatile struct davinci_mmc_regs *regs)
77{
Heiko Schocher79b05d52011-10-30 19:15:53 +000078 uint wdog = WATCHDOG_COUNT;
Sandeep Paulraj57418d22010-12-20 20:01:21 -050079
Sandeep Paulraj57418d22010-12-20 20:01:21 -050080 while (--wdog && (get_val(&regs->mmcst1) & MMCST1_BUSY))
81 udelay(10);
82
83 if (wdog == 0)
Jaehoon Chung915ffa52016-07-19 16:33:36 +090084 return -ECOMM;
Sandeep Paulraj57418d22010-12-20 20:01:21 -050085
86 return 0;
87}
88
89/* Status bit wait loop for MMCST0 - Checks for error bits as well */
90static int dmmc_check_status(volatile struct davinci_mmc_regs *regs,
91 uint *cur_st, uint st_ready, uint st_error)
92{
93 uint wdog = WATCHDOG_COUNT;
94 uint mmcstatus = *cur_st;
95
96 while (wdog--) {
97 if (mmcstatus & st_ready) {
98 *cur_st = mmcstatus;
99 mmcstatus = get_val(&regs->mmcst1);
100 return 0;
101 } else if (mmcstatus & st_error) {
102 if (mmcstatus & MMCST0_TOUTRS)
Jaehoon Chung915ffa52016-07-19 16:33:36 +0900103 return -ETIMEDOUT;
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500104 printf("[ ST0 ERROR %x]\n", mmcstatus);
105 /*
106 * Ignore CRC errors as some MMC cards fail to
107 * initialize on DM365-EVM on the SD1 slot
108 */
109 if (mmcstatus & MMCST0_CRCRS)
110 return 0;
Jaehoon Chung915ffa52016-07-19 16:33:36 +0900111 return -ECOMM;
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500112 }
113 udelay(10);
114
115 mmcstatus = get_val(&regs->mmcst0);
116 }
117
118 printf("Status %x Timeout ST0:%x ST1:%x\n", st_ready, mmcstatus,
119 get_val(&regs->mmcst1));
Jaehoon Chung915ffa52016-07-19 16:33:36 +0900120 return -ECOMM;
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500121}
122
123/*
124 * Sends a command out on the bus. Takes the mmc pointer,
125 * a command pointer, and an optional data pointer.
126 */
127static int
128dmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
129{
130 struct davinci_mmc *host = mmc->priv;
131 volatile struct davinci_mmc_regs *regs = host->reg_base;
132 uint mmcstatus, status_rdy, status_err;
133 uint i, cmddata, bytes_left = 0;
134 int fifo_words, fifo_bytes, err;
135 char *data_buf = NULL;
136
137 /* Clear status registers */
138 mmcstatus = get_val(&regs->mmcst0);
139 fifo_words = (host->version == MMC_CTLR_VERSION_2) ? 16 : 8;
140 fifo_bytes = fifo_words << 2;
141
142 /* Wait for any previous busy signal to be cleared */
143 dmmc_busy_wait(regs);
144
145 cmddata = cmd->cmdidx;
146 cmddata |= MMCCMD_PPLEN;
147
148 /* Send init clock for CMD0 */
149 if (cmd->cmdidx == MMC_CMD_GO_IDLE_STATE)
150 cmddata |= MMCCMD_INITCK;
151
152 switch (cmd->resp_type) {
153 case MMC_RSP_R1b:
154 cmddata |= MMCCMD_BSYEXP;
155 /* Fall-through */
156 case MMC_RSP_R1: /* R1, R1b, R5, R6, R7 */
157 cmddata |= MMCCMD_RSPFMT_R1567;
158 break;
159 case MMC_RSP_R2:
160 cmddata |= MMCCMD_RSPFMT_R2;
161 break;
162 case MMC_RSP_R3: /* R3, R4 */
163 cmddata |= MMCCMD_RSPFMT_R3;
164 break;
165 }
166
167 set_val(&regs->mmcim, 0);
168
169 if (data) {
170 /* clear previous data transfer if any and set new one */
171 bytes_left = (data->blocksize * data->blocks);
172
173 /* Reset FIFO - Always use 32 byte fifo threshold */
174 set_val(&regs->mmcfifoctl,
175 (MMCFIFOCTL_FIFOLEV | MMCFIFOCTL_FIFORST));
176
177 if (host->version == MMC_CTLR_VERSION_2)
178 cmddata |= MMCCMD_DMATRIG;
179
180 cmddata |= MMCCMD_WDATX;
181 if (data->flags == MMC_DATA_READ) {
182 set_val(&regs->mmcfifoctl, MMCFIFOCTL_FIFOLEV);
183 } else if (data->flags == MMC_DATA_WRITE) {
184 set_val(&regs->mmcfifoctl,
185 (MMCFIFOCTL_FIFOLEV |
186 MMCFIFOCTL_FIFODIR));
187 cmddata |= MMCCMD_DTRW;
188 }
189
190 set_val(&regs->mmctod, 0xFFFF);
191 set_val(&regs->mmcnblk, (data->blocks & MMCNBLK_NBLK_MASK));
192 set_val(&regs->mmcblen, (data->blocksize & MMCBLEN_BLEN_MASK));
193
194 if (data->flags == MMC_DATA_WRITE) {
195 uint val;
196 data_buf = (char *)data->src;
197 /* For write, fill FIFO with data before issue of CMD */
198 for (i = 0; (i < fifo_words) && bytes_left; i++) {
199 memcpy((char *)&val, data_buf, 4);
200 set_val(&regs->mmcdxr, val);
201 data_buf += 4;
202 bytes_left -= 4;
203 }
204 }
205 } else {
206 set_val(&regs->mmcblen, 0);
207 set_val(&regs->mmcnblk, 0);
208 }
209
210 set_val(&regs->mmctor, 0x1FFF);
211
212 /* Send the command */
213 set_val(&regs->mmcarghl, cmd->cmdarg);
214 set_val(&regs->mmccmd, cmddata);
215
216 status_rdy = MMCST0_RSPDNE;
217 status_err = (MMCST0_TOUTRS | MMCST0_TOUTRD |
218 MMCST0_CRCWR | MMCST0_CRCRD);
219 if (cmd->resp_type & MMC_RSP_CRC)
220 status_err |= MMCST0_CRCRS;
221
222 mmcstatus = get_val(&regs->mmcst0);
223 err = dmmc_check_status(regs, &mmcstatus, status_rdy, status_err);
224 if (err)
225 return err;
226
227 /* For R1b wait for busy done */
228 if (cmd->resp_type == MMC_RSP_R1b)
229 dmmc_busy_wait(regs);
230
231 /* Collect response from controller for specific commands */
232 if (mmcstatus & MMCST0_RSPDNE) {
233 /* Copy the response to the response buffer */
234 if (cmd->resp_type & MMC_RSP_136) {
235 cmd->response[0] = get_val(&regs->mmcrsp67);
236 cmd->response[1] = get_val(&regs->mmcrsp45);
237 cmd->response[2] = get_val(&regs->mmcrsp23);
238 cmd->response[3] = get_val(&regs->mmcrsp01);
239 } else if (cmd->resp_type & MMC_RSP_PRESENT) {
240 cmd->response[0] = get_val(&regs->mmcrsp67);
241 }
242 }
243
244 if (data == NULL)
245 return 0;
246
247 if (data->flags == MMC_DATA_READ) {
248 /* check for DATDNE along with DRRDY as the controller might
249 * set the DATDNE without DRRDY for smaller transfers with
250 * less than FIFO threshold bytes
251 */
252 status_rdy = MMCST0_DRRDY | MMCST0_DATDNE;
253 status_err = MMCST0_TOUTRD | MMCST0_CRCRD;
254 data_buf = data->dest;
255 } else {
256 status_rdy = MMCST0_DXRDY | MMCST0_DATDNE;
257 status_err = MMCST0_CRCWR;
258 }
259
260 /* Wait until all of the blocks are transferred */
261 while (bytes_left) {
262 err = dmmc_check_status(regs, &mmcstatus, status_rdy,
263 status_err);
264 if (err)
265 return err;
266
267 if (data->flags == MMC_DATA_READ) {
268 /*
269 * MMC controller sets the Data receive ready bit
270 * (DRRDY) in MMCST0 even before the entire FIFO is
271 * full. This results in erratic behavior if we start
272 * reading the FIFO soon after DRRDY. Wait for the
273 * FIFO full bit in MMCST1 for proper FIFO clearing.
274 */
275 if (bytes_left > fifo_bytes)
276 dmmc_wait_fifo_status(regs, 0x4a);
Davide Bonfanti3ba36d62012-11-29 01:06:53 +0000277 else if (bytes_left == fifo_bytes) {
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500278 dmmc_wait_fifo_status(regs, 0x40);
Davide Bonfanti3ba36d62012-11-29 01:06:53 +0000279 if (cmd->cmdidx == MMC_CMD_SEND_EXT_CSD)
280 udelay(600);
281 }
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500282
283 for (i = 0; bytes_left && (i < fifo_words); i++) {
284 cmddata = get_val(&regs->mmcdrr);
285 memcpy(data_buf, (char *)&cmddata, 4);
286 data_buf += 4;
287 bytes_left -= 4;
288 }
289 } else {
290 /*
291 * MMC controller sets the Data transmit ready bit
292 * (DXRDY) in MMCST0 even before the entire FIFO is
293 * empty. This results in erratic behavior if we start
294 * writing the FIFO soon after DXRDY. Wait for the
295 * FIFO empty bit in MMCST1 for proper FIFO clearing.
296 */
297 dmmc_wait_fifo_status(regs, MMCST1_FIFOEMP);
298 for (i = 0; bytes_left && (i < fifo_words); i++) {
299 memcpy((char *)&cmddata, data_buf, 4);
300 set_val(&regs->mmcdxr, cmddata);
301 data_buf += 4;
302 bytes_left -= 4;
303 }
304 dmmc_busy_wait(regs);
305 }
306 }
307
308 err = dmmc_check_status(regs, &mmcstatus, MMCST0_DATDNE, status_err);
309 if (err)
310 return err;
311
312 return 0;
313}
314
315/* Initialize Davinci MMC controller */
316static int dmmc_init(struct mmc *mmc)
317{
318 struct davinci_mmc *host = mmc->priv;
319 struct davinci_mmc_regs *regs = host->reg_base;
320
321 /* Clear status registers explicitly - soft reset doesn't clear it
322 * If Uboot is invoked from UBL with SDMMC Support, the status
323 * registers can have uncleared bits
324 */
325 get_val(&regs->mmcst0);
326 get_val(&regs->mmcst1);
327
328 /* Hold software reset */
329 set_bit(&regs->mmcctl, MMCCTL_DATRST);
330 set_bit(&regs->mmcctl, MMCCTL_CMDRST);
331 udelay(10);
332
333 set_val(&regs->mmcclk, 0x0);
334 set_val(&regs->mmctor, 0x1FFF);
335 set_val(&regs->mmctod, 0xFFFF);
336
337 /* Clear software reset */
338 clear_bit(&regs->mmcctl, MMCCTL_DATRST);
339 clear_bit(&regs->mmcctl, MMCCTL_CMDRST);
340
341 udelay(10);
342
343 /* Reset FIFO - Always use the maximum fifo threshold */
344 set_val(&regs->mmcfifoctl, (MMCFIFOCTL_FIFOLEV | MMCFIFOCTL_FIFORST));
345 set_val(&regs->mmcfifoctl, MMCFIFOCTL_FIFOLEV);
346
347 return 0;
348}
349
Masahiro Yamada4aa2ba32017-05-09 20:31:39 +0900350/* Set buswidth or clock as indicated by the MMC framework */
Jaehoon Chung07b0b9c2016-12-30 15:30:16 +0900351static int dmmc_set_ios(struct mmc *mmc)
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500352{
353 struct davinci_mmc *host = mmc->priv;
354 struct davinci_mmc_regs *regs = host->reg_base;
355
356 /* Set the bus width */
357 if (mmc->bus_width == 4)
358 set_bit(&regs->mmcctl, MMCCTL_WIDTH_4_BIT);
359 else
360 clear_bit(&regs->mmcctl, MMCCTL_WIDTH_4_BIT);
361
362 /* Set clock speed */
363 if (mmc->clock)
364 dmmc_set_clock(mmc, mmc->clock);
Jaehoon Chung07b0b9c2016-12-30 15:30:16 +0900365
366 return 0;
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500367}
368
Pantelis Antoniouab769f22014-02-26 19:28:45 +0200369static const struct mmc_ops dmmc_ops = {
370 .send_cmd = dmmc_send_cmd,
371 .set_ios = dmmc_set_ios,
372 .init = dmmc_init,
373};
374
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500375/* Called from board_mmc_init during startup. Can be called multiple times
376 * depending on the number of slots available on board and controller
377 */
378int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host)
379{
Pantelis Antoniou93bfd612014-03-11 19:34:20 +0200380 host->cfg.name = "davinci";
381 host->cfg.ops = &dmmc_ops;
382 host->cfg.f_min = 200000;
383 host->cfg.f_max = 25000000;
384 host->cfg.voltages = host->voltages;
385 host->cfg.host_caps = host->host_caps;
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500386
Pantelis Antoniou93bfd612014-03-11 19:34:20 +0200387 host->cfg.b_max = DAVINCI_MAX_BLOCKS;
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500388
Pantelis Antoniou93bfd612014-03-11 19:34:20 +0200389 mmc_create(&host->cfg, host);
Sandeep Paulraj57418d22010-12-20 20:01:21 -0500390
391 return 0;
392}