| Kever Yang | fa43743 | 2017-02-22 16:56:35 +0800 | [diff] [blame] | 1 | Rockchip Dynamic Memory Controller Driver |
| 2 | Required properties: |
| 3 | - compatible: "rockchip,rk3399-dmc", "syscon" |
| 4 | - rockchip,cru: this driver should access cru regs, so need get cru here |
| 5 | - rockchip,pmucru: this driver should access pmucru regs, so need get pmucru here |
| 6 | - rockchip,pmugrf: this driver should access pmugrf regs, so need get pmugrf here |
| 7 | - rockchip,pmusgrf: this driver should access pmusgrf regs, so need get pmusgrf here |
| 8 | - rockchip,cic: this driver should access cic regs, so need get cic here |
| 9 | - reg: dynamic ram protocol controller(PCTL) address, PHY Independent(PI) address, phy controller(PHYCTL) address and memory schedule(MSCH) address |
| 10 | - clock: must include clock specifiers corresponding to entries in the clock-names property. |
| 11 | Must contain |
| 12 | dmc_clk: for ddr working frequency |
| 13 | - rockchip,sdram-params: SDRAM parameters, including all the information by ddr driver: |
| 14 | Must contain |
| 15 | Genarate by vendor tool and adjust for U-Boot dtsi. |
| 16 | |
| 17 | Example: |
| 18 | dmc: dmc { |
| 19 | u-boot,dm-pre-reloc; |
| 20 | compatible = "rockchip,rk3399-dmc"; |
| 21 | devfreq-events = <&dfi>; |
| 22 | interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>; |
| 23 | clocks = <&cru SCLK_DDRCLK>; |
| 24 | clock-names = "dmc_clk"; |
| 25 | reg = <0x0 0xffa80000 0x0 0x0800 |
| 26 | 0x0 0xffa80800 0x0 0x1800 |
| 27 | 0x0 0xffa82000 0x0 0x2000 |
| 28 | 0x0 0xffa84000 0x0 0x1000 |
| 29 | 0x0 0xffa88000 0x0 0x0800 |
| 30 | 0x0 0xffa88800 0x0 0x1800 |
| 31 | 0x0 0xffa8a000 0x0 0x2000 |
| 32 | 0x0 0xffa8c000 0x0 0x1000>; |
| 33 | }; |
| 34 | |
| 35 | &dmc { |
| 36 | rockchip,sdram-params = < |
| 37 | 0x2 |
| 38 | 0xa |
| 39 | 0x3 |
| 40 | ... |
| 41 | >; |
| 42 | }; |