Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / d30b2bf3b32ea41a007558559999b7c1b35ed0ce / . / arch / arm / dts / am335x-sl50.dts
blob: 423f46613bb45fd42514d1f737a327b01f4a2ab5 [file] [log] [blame]
Andrew Davisd30b2bf2023-04-11 13:24:54 -0500[diff] [blame^]1// SPDX-License-Identifier: GPL-2.0-only
Enric Balletbo i Serrae5f08782018-12-27 17:34:11 +0100[diff] [blame]2/*
3 * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
Enric Balletbo i Serrae5f08782018-12-27 17:34:11 +0100[diff] [blame]4 */
5/dts-v1/;
6
7#include "am33xx.dtsi"
8
9/ {
10 model = "Toby Churchill SL50 Series";
11 compatible = "tcl,am335x-sl50", "ti,am33xx";
12
13 cpus {
14 cpu@0 {
15 cpu0-supply = <&dcdc2_reg>;
16 };
17 };
18
19 memory@80000000 {
20 device_type = "memory";
21 reg = <0x80000000 0x20000000>; /* 512 MB */
22 };
23
24 chosen {
25 stdout-path = &uart0;
26 };
27
28 leds {
29 compatible = "gpio-leds";
30 pinctrl-names = "default";
31 pinctrl-0 = <&led_pins>;
32
33 led0 {
34 label = "sl50:green:usr0";
35 gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
36 default-state = "off";
37 };
38
39 led1 {
40 label = "sl50:red:usr1";
41 gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
42 default-state = "off";
43 };
44
45 led2 {
46 label = "sl50:green:usr2";
47 gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
48 default-state = "off";
49 };
50
51 led3 {
52 label = "sl50:red:usr3";
53 gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
54 default-state = "off";
55 };
56 };
57
58 backlight0: disp0 {
59 compatible = "pwm-backlight";
60 pwms = <&ehrpwm1 0 500000 0>;
61 brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
62 default-brightness-level = <6>;
63 };
64
65 backlight1: disp1 {
66 compatible = "pwm-backlight";
67 pwms = <&ehrpwm1 1 500000 0>;
68 brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
69 default-brightness-level = <6>;
70 };
71
72 clocks {
73 compatible = "simple-bus";
74 #address-cells = <1>;
75 #size-cells = <0>;
76
77 /* audio external oscillator */
78 tlv320aic3x_mclk: oscillator@0 {
79 compatible = "fixed-clock";
80 #clock-cells = <0>;
81 clock-frequency = <24576000>; /* 24.576MHz */
82 };
83 };
84
85 sound {
86 compatible = "ti,da830-evm-audio";
87 ti,model = "AM335x-SL50";
88 ti,audio-codec = <&audio_codec>;
89 ti,mcasp-controller = <&mcasp0>;
90
91 clocks = <&tlv320aic3x_mclk>;
92 clock-names = "mclk";
93
94 ti,audio-routing =
95 "Headphone Jack", "HPLOUT",
96 "Headphone Jack", "HPROUT",
97 "LINE1R", "Line In",
98 "LINE1L", "Line In";
99 };
100
101 emmc_pwrseq: pwrseq@0 {
102 compatible = "mmc-pwrseq-emmc";
103 pinctrl-names = "default";
104 pinctrl-0 = <&emmc_pwrseq_pins>;
105 reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
106 };
107
108 vmmcsd_fixed: fixedregulator0 {
109 compatible = "regulator-fixed";
110 regulator-name = "vmmcsd_fixed";
111 regulator-min-microvolt = <3300000>;
112 regulator-max-microvolt = <3300000>;
113 };
114};
115
116&am33xx_pinmux {
117 pinctrl-names = "default";
118 pinctrl-0 = <&lwb_pins>;
119
120 led_pins: pinmux_led_pins {
121 pinctrl-single,pins = <
122 AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
123 AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* gpmc_a6.gpio1_22 */
124 AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* gpmc_a7.gpio1_23 */
125 AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* gpmc_a8.gpio1_24 */
126 >;
127 };
128
129 uart0_pins: pinmux_uart0_pins {
130 pinctrl-single,pins = <
131 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
132 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
133 >;
134 };
135
136 uart1_pins: pinmux_uart1_pins {
137 pinctrl-single,pins = <
138 AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
139 AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
140 >;
141 };
142
143 uart4_pins: pinmux_uart4_pins {
144 pinctrl-single,pins = <
145 AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */
146 AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */
147 >;
148 };
149
150 i2c0_pins: pinmux_i2c0_pins {
151 pinctrl-single,pins = <
152 AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
153 AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
154 >;
155 };
156
157 i2c2_pins: pinmux_i2c2_pins {
158 pinctrl-single,pins = <
159 AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
160 AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
161 >;
162 };
163
164 cpsw_default: cpsw_default {
165 pinctrl-single,pins = <
166 /* Slave 1 */
167 AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
168 AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
169 AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
170 AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
171 AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
172 AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
173 AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
174 AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
175 AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
176 AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
177 AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
178 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
179 AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
180 >;
181 };
182
183 cpsw_sleep: cpsw_sleep {
184 pinctrl-single,pins = <
185 /* Slave 1 reset value */
186 AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
187 AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
188 AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
189 AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
190 AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
191 AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
192 AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
193 AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
194 AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
195 AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
196 AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
197 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
198 AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
199 >;
200 };
201
202 davinci_mdio_default: davinci_mdio_default {
203 pinctrl-single,pins = <
204 /* MDIO */
205 AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
206 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
207 >;
208 };
209
210 davinci_mdio_sleep: davinci_mdio_sleep {
211 pinctrl-single,pins = <
212 /* MDIO reset value */
213 AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
214 AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
215 >;
216 };
217
218 mmc1_pins: pinmux_mmc1_pins {
219 pinctrl-single,pins = <
220 AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
221 >;
222 };
223
224 emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
225 pinctrl-single,pins = <
226 AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a4.gpio1_20 */
227 >;
228 };
229
230 emmc_pins: pinmux_emmc_pins {
231 pinctrl-single,pins = <
232 AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
233 AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
234 AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
235 AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
236 AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
237 AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
238 AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
239 AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
240 AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
241 AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
242 >;
243 };
244
245 audio_pins: pinmux_audio_pins {
246 pinctrl-single,pins = <
247 AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
248 AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
249 AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
250 AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
251 AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */
252 >;
253 };
254
255 ehrpwm1_pins: pinmux_ehrpwm1a_pins {
256 pinctrl-single,pins = <
257 AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */
258 AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */
259 >;
260 };
261
262 spi0_pins: pinmux_spi0_pins {
263 pinctrl-single,pins = <
264 AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */
265 AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */
266 AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */
267 AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */
268 AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */
269 >;
270 };
271
272 lwb_pins: pinmux_lwb_pins {
273 pinctrl-single,pins = <
274 AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */
275 AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */
276 AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */
277 AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */
278 AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */
279 AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
280 /* PDI Bus - Battery system */
281 AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
282 AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
283 >;
284 };
285};
286
287&i2c0 {
288 status = "okay";
289 pinctrl-names = "default";
290 pinctrl-0 = <&i2c0_pins>;
291
292 clock-frequency = <400000>;
293
294 tps: tps@24 {
295 reg = <0x24>;
296 };
297
298 bq32000: rtc@68 {
299 compatible = "ti,bq32000";
300 trickle-resistor-ohms = <1120>;
301 reg = <0x68>;
302 };
303
304 eeprom: eeprom@50 {
305 compatible = "atmel,24c256";
306 reg = <0x50>;
307 };
308
309 gpio_exp: mcp23017@20 {
310 compatible = "microchip,mcp23017";
311 reg = <0x20>;
312 };
313
314};
315
316&i2c2 {
317 status = "okay";
318 pinctrl-names = "default";
319 pinctrl-0 = <&i2c2_pins>;
320
321 clock-frequency = <400000>;
322
323 audio_codec: tlv320aic3106@1b {
324 status = "okay";
325 compatible = "ti,tlv320aic3106";
326 reg = <0x1b>;
327
328 AVDD-supply = <&ldo4_reg>;
329 IOVDD-supply = <&ldo4_reg>;
330 DRVDD-supply = <&ldo4_reg>;
331 DVDD-supply = <&ldo3_reg>;
332 };
333
334 /* Ambient Light Sensor */
335 als: isl29023@44 {
336 compatible = "isil,isl29023";
337 reg = <0x44>;
338 };
339};
340
341&rtc {
342 status = "disabled";
343};
344
345&usb {
346 status = "okay";
347};
348
349&usb_ctrl_mod {
350 status = "okay";
351};
352
353&usb0_phy {
354 status = "okay";
355};
356
357&usb1_phy {
358 status = "okay";
359};
360
361&usb0 {
362 status = "okay";
363 dr_mode = "peripheral";
364};
365
366&usb1 {
367 status = "okay";
368 dr_mode = "host";
369};
370
371&cppi41dma {
372 status = "okay";
373};
374
375&mmc1 {
376 status = "okay";
377 pinctrl-names = "default";
378 pinctrl-0 = <&mmc1_pins>;
379 bus-width = <4>;
380 cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
381 vmmc-supply = <&vmmcsd_fixed>;
382};
383
384&mmc2 {
385 status = "okay";
386 pinctrl-names = "default";
387 pinctrl-0 = <&emmc_pins>;
388 bus-width = <8>;
389 vmmc-supply = <&vmmcsd_fixed>;
390 mmc-pwrseq = <&emmc_pwrseq>;
391};
392
393&mcasp0 {
394 status = "okay";
395 pinctrl-names = "default";
396 pinctrl-0 = <&audio_pins>;
397
398 op-mode = <0>; /* MCASP_ISS_MODE */
399 tdm-slots = <2>;
400 serial-dir = <
401 2 0 1 0
402 0 0 0 0
403 0 0 0 0
404 0 0 0 0
405 >;
406 tx-num-evt = <1>;
407 rx-num-evt = <1>;
408};
409
410&uart0 {
411 status = "okay";
412 pinctrl-names = "default";
413 pinctrl-0 = <&uart0_pins>;
414};
415
416&uart1 {
417 status = "okay";
418 pinctrl-names = "default";
419 pinctrl-0 = <&uart1_pins>;
420};
421
422&uart4 {
423 status = "okay";
424 pinctrl-names = "default";
425 pinctrl-0 = <&uart4_pins>;
426};
427
428&spi0 {
429 status = "okay";
430 pinctrl-names = "default";
431 pinctrl-0 = <&spi0_pins>;
432
433 flash: n25q032@1 {
434 #address-cells = <1>;
435 #size-cells = <1>;
436 compatible = "micron,n25q032";
437 reg = <1>;
438 spi-max-frequency = <5000000>;
439 };
440};
441
442#include "tps65217.dtsi"
443
444&tps {
445 ti,pmic-shutdown-controller;
446
447 interrupt-parent = <&intc>;
448 interrupts = <7>; /* NNMI */
449
450 regulators {
451 dcdc1_reg: regulator@0 {
452 /* VDDS_DDR */
453 regulator-min-microvolt = <1500000>;
454 regulator-max-microvolt = <1500000>;
455 regulator-always-on;
456 };
457
458 dcdc2_reg: regulator@1 {
459 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
460 regulator-name = "vdd_mpu";
461 regulator-min-microvolt = <925000>;
462 regulator-max-microvolt = <1325000>;
463 regulator-boot-on;
464 regulator-always-on;
465 };
466
467 dcdc3_reg: regulator@2 {
468 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
469 regulator-name = "vdd_core";
470 regulator-min-microvolt = <925000>;
471 regulator-max-microvolt = <1150000>;
472 regulator-boot-on;
473 regulator-always-on;
474 };
475
476 ldo1_reg: regulator@3 {
477 /* VRTC / VIO / VDDS*/
478 regulator-always-on;
479 regulator-min-microvolt = <1800000>;
480 regulator-max-microvolt = <1800000>;
481 };
482
483 ldo2_reg: regulator@4 {
484 /* VDD_3V3AUX */
485 regulator-always-on;
486 regulator-min-microvolt = <3300000>;
487 regulator-max-microvolt = <3300000>;
488 };
489
490 ldo3_reg: regulator@5 {
491 /* VDD_1V8 */
492 regulator-min-microvolt = <1800000>;
493 regulator-max-microvolt = <1800000>;
494 regulator-always-on;
495 };
496
497 ldo4_reg: regulator@6 {
498 /* VDD_3V3A */
499 regulator-min-microvolt = <3300000>;
500 regulator-max-microvolt = <3300000>;
501 regulator-always-on;
502 };
503 };
504};
505
506&cpsw_emac0 {
Enric Balletbo i Serrae5f08782018-12-27 17:34:11 +0100[diff] [blame]507 phy-mode = "mii";
Grygorii Strashko3b3e8a32019-08-31 10:30:34 +0300[diff] [blame]508 phy-handle = <&ethphy0>;
Enric Balletbo i Serrae5f08782018-12-27 17:34:11 +0100[diff] [blame]509};
510
511&mac {
512 status = "okay";
513 pinctrl-names = "default", "sleep";
514 pinctrl-0 = <&cpsw_default>;
515 pinctrl-1 = <&cpsw_sleep>;
516};
517
518&davinci_mdio {
519 status = "okay";
520 pinctrl-names = "default", "sleep";
521 pinctrl-0 = <&davinci_mdio_default>;
522 pinctrl-1 = <&davinci_mdio_sleep>;
Grygorii Strashko3b3e8a32019-08-31 10:30:34 +0300[diff] [blame]523 reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
524 reset-delay-us = <100>; /* PHY datasheet states 100us min */
525
526 ethphy0: ethernet-phy@0 {
527 reg = <0>;
528 };
Enric Balletbo i Serrae5f08782018-12-27 17:34:11 +0100[diff] [blame]529};
530
531&sham {
532 status = "okay";
533};
534
535&aes {
536 status = "okay";
537};
538
539&epwmss1 {
540 status = "okay";
541};
542
543&ehrpwm1 {
544 status = "okay";
545 pinctrl-names = "default";
546 pinctrl-0 = <&ehrpwm1_pins>;
547};