blob: 848f174b6e48708976e05021e554d53ccd1a1e19 [file] [log] [blame]
Yannick Fertré78157b22019-10-07 15:29:08 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
4 * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
5 * Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
6 *
7 * This otm8009a panel driver is inspired from the Linux Kernel driver
8 * drivers/gpu/drm/panel/panel-orisetech-otm8009a.c.
9 */
10#include <common.h>
11#include <backlight.h>
12#include <dm.h>
13#include <mipi_dsi.h>
14#include <panel.h>
15#include <asm/gpio.h>
Simon Glass336d4612020-02-03 07:36:16 -070016#include <dm/device_compat.h>
Simon Glassc05ed002020-05-10 11:40:11 -060017#include <linux/delay.h>
Yannick Fertré78157b22019-10-07 15:29:08 +020018#include <power/regulator.h>
19
20#define OTM8009A_BACKLIGHT_DEFAULT 240
21#define OTM8009A_BACKLIGHT_MAX 255
22
23/* Manufacturer Command Set */
24#define MCS_ADRSFT 0x0000 /* Address Shift Function */
25#define MCS_PANSET 0xB3A6 /* Panel Type Setting */
26#define MCS_SD_CTRL 0xC0A2 /* Source Driver Timing Setting */
27#define MCS_P_DRV_M 0xC0B4 /* Panel Driving Mode */
28#define MCS_OSC_ADJ 0xC181 /* Oscillator Adjustment for Idle/Normal mode */
29#define MCS_RGB_VID_SET 0xC1A1 /* RGB Video Mode Setting */
30#define MCS_SD_PCH_CTRL 0xC480 /* Source Driver Precharge Control */
31#define MCS_NO_DOC1 0xC48A /* Command not documented */
32#define MCS_PWR_CTRL1 0xC580 /* Power Control Setting 1 */
33#define MCS_PWR_CTRL2 0xC590 /* Power Control Setting 2 for Normal Mode */
34#define MCS_PWR_CTRL4 0xC5B0 /* Power Control Setting 4 for DC Voltage */
35#define MCS_PANCTRLSET1 0xCB80 /* Panel Control Setting 1 */
36#define MCS_PANCTRLSET2 0xCB90 /* Panel Control Setting 2 */
37#define MCS_PANCTRLSET3 0xCBA0 /* Panel Control Setting 3 */
38#define MCS_PANCTRLSET4 0xCBB0 /* Panel Control Setting 4 */
39#define MCS_PANCTRLSET5 0xCBC0 /* Panel Control Setting 5 */
40#define MCS_PANCTRLSET6 0xCBD0 /* Panel Control Setting 6 */
41#define MCS_PANCTRLSET7 0xCBE0 /* Panel Control Setting 7 */
42#define MCS_PANCTRLSET8 0xCBF0 /* Panel Control Setting 8 */
43#define MCS_PANU2D1 0xCC80 /* Panel U2D Setting 1 */
44#define MCS_PANU2D2 0xCC90 /* Panel U2D Setting 2 */
45#define MCS_PANU2D3 0xCCA0 /* Panel U2D Setting 3 */
46#define MCS_PAND2U1 0xCCB0 /* Panel D2U Setting 1 */
47#define MCS_PAND2U2 0xCCC0 /* Panel D2U Setting 2 */
48#define MCS_PAND2U3 0xCCD0 /* Panel D2U Setting 3 */
49#define MCS_GOAVST 0xCE80 /* GOA VST Setting */
50#define MCS_GOACLKA1 0xCEA0 /* GOA CLKA1 Setting */
51#define MCS_GOACLKA3 0xCEB0 /* GOA CLKA3 Setting */
52#define MCS_GOAECLK 0xCFC0 /* GOA ECLK Setting */
53#define MCS_NO_DOC2 0xCFD0 /* Command not documented */
54#define MCS_GVDDSET 0xD800 /* GVDD/NGVDD */
55#define MCS_VCOMDC 0xD900 /* VCOM Voltage Setting */
56#define MCS_GMCT2_2P 0xE100 /* Gamma Correction 2.2+ Setting */
57#define MCS_GMCT2_2N 0xE200 /* Gamma Correction 2.2- Setting */
58#define MCS_NO_DOC3 0xF5B6 /* Command not documented */
59#define MCS_CMD2_ENA1 0xFF00 /* Enable Access Command2 "CMD2" */
60#define MCS_CMD2_ENA2 0xFF80 /* Enable Access Orise Command2 */
61
62struct otm8009a_panel_priv {
63 struct udevice *reg;
64 struct gpio_desc reset;
Yannick Fertré78157b22019-10-07 15:29:08 +020065};
66
67static const struct display_timing default_timing = {
68 .pixelclock.typ = 29700000,
69 .hactive.typ = 480,
70 .hfront_porch.typ = 98,
71 .hback_porch.typ = 98,
72 .hsync_len.typ = 32,
73 .vactive.typ = 800,
74 .vfront_porch.typ = 15,
75 .vback_porch.typ = 14,
76 .vsync_len.typ = 10,
77};
78
79static void otm8009a_dcs_write_buf(struct udevice *dev, const void *data,
80 size_t len)
81{
Simon Glassc69cda22020-12-03 16:55:20 -070082 struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
Yannick Fertré78157b22019-10-07 15:29:08 +020083 struct mipi_dsi_device *device = plat->device;
84
85 if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
86 dev_err(dev, "mipi dsi dcs write buffer failed\n");
87}
88
89static void otm8009a_dcs_write_buf_hs(struct udevice *dev, const void *data,
90 size_t len)
91{
Simon Glassc69cda22020-12-03 16:55:20 -070092 struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
Yannick Fertré78157b22019-10-07 15:29:08 +020093 struct mipi_dsi_device *device = plat->device;
94
95 /* data will be sent in dsi hs mode (ie. no lpm) */
96 device->mode_flags &= ~MIPI_DSI_MODE_LPM;
97
98 if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
99 dev_err(dev, "mipi dsi dcs write buffer failed\n");
100
101 /* restore back the dsi lpm mode */
102 device->mode_flags |= MIPI_DSI_MODE_LPM;
103}
104
105#define dcs_write_seq(dev, seq...) \
106({ \
107 static const u8 d[] = { seq }; \
108 otm8009a_dcs_write_buf(dev, d, ARRAY_SIZE(d)); \
109})
110
111#define dcs_write_seq_hs(dev, seq...) \
112({ \
113 static const u8 d[] = { seq }; \
114 otm8009a_dcs_write_buf_hs(dev, d, ARRAY_SIZE(d)); \
115})
116
117#define dcs_write_cmd_at(dev, cmd, seq...) \
118({ \
119 static const u16 c = cmd; \
120 struct udevice *device = dev; \
121 dcs_write_seq(device, MCS_ADRSFT, (c) & 0xFF); \
122 dcs_write_seq(device, (c) >> 8, seq); \
123})
124
125static int otm8009a_init_sequence(struct udevice *dev)
126{
Simon Glassc69cda22020-12-03 16:55:20 -0700127 struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
Yannick Fertré78157b22019-10-07 15:29:08 +0200128 struct mipi_dsi_device *device = plat->device;
129 int ret;
130
131 /* Enter CMD2 */
132 dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0x80, 0x09, 0x01);
133
134 /* Enter Orise Command2 */
135 dcs_write_cmd_at(dev, MCS_CMD2_ENA2, 0x80, 0x09);
136
137 dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL, 0x30);
138 mdelay(10);
139
140 dcs_write_cmd_at(dev, MCS_NO_DOC1, 0x40);
141 mdelay(10);
142
143 dcs_write_cmd_at(dev, MCS_PWR_CTRL4 + 1, 0xA9);
144 dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 1, 0x34);
145 dcs_write_cmd_at(dev, MCS_P_DRV_M, 0x50);
146 dcs_write_cmd_at(dev, MCS_VCOMDC, 0x4E);
147 dcs_write_cmd_at(dev, MCS_OSC_ADJ, 0x66); /* 65Hz */
148 dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 2, 0x01);
149 dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 5, 0x34);
150 dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 4, 0x33);
151 dcs_write_cmd_at(dev, MCS_GVDDSET, 0x79, 0x79);
152 dcs_write_cmd_at(dev, MCS_SD_CTRL + 1, 0x1B);
153 dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 2, 0x83);
154 dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL + 1, 0x83);
155 dcs_write_cmd_at(dev, MCS_RGB_VID_SET, 0x0E);
156 dcs_write_cmd_at(dev, MCS_PANSET, 0x00, 0x01);
157
158 dcs_write_cmd_at(dev, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00);
159 dcs_write_cmd_at(dev, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00,
160 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00);
161 dcs_write_cmd_at(dev, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00,
162 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00);
163 dcs_write_cmd_at(dev, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00,
164 0x01, 0x02, 0x00, 0x00);
165
166 dcs_write_cmd_at(dev, MCS_NO_DOC2, 0x00);
167
168 dcs_write_cmd_at(dev, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
169 dcs_write_cmd_at(dev, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
170 0, 0, 0, 0, 0);
171 dcs_write_cmd_at(dev, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
172 0, 0, 0, 0, 0);
173 dcs_write_cmd_at(dev, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
174 dcs_write_cmd_at(dev, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0,
175 0, 0, 0, 0, 0);
176 dcs_write_cmd_at(dev, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4,
177 4, 0, 0, 0, 0);
178 dcs_write_cmd_at(dev, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
179 dcs_write_cmd_at(dev, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
180 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
181
182 dcs_write_cmd_at(dev, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25,
183 0x00, 0x00, 0x00, 0x00);
184 dcs_write_cmd_at(dev, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
185 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02);
186 dcs_write_cmd_at(dev, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00,
187 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
188 dcs_write_cmd_at(dev, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26,
189 0x00, 0x00, 0x00, 0x00);
190 dcs_write_cmd_at(dev, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
191 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01);
192 dcs_write_cmd_at(dev, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00,
193 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
194
195 dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 1, 0x66);
196
197 dcs_write_cmd_at(dev, MCS_NO_DOC3, 0x06);
198
199 dcs_write_cmd_at(dev, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
200 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
201 0x01);
202 dcs_write_cmd_at(dev, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
203 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
204 0x01);
205
206 /* Exit CMD2 */
207 dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF);
208
209 ret = mipi_dsi_dcs_nop(device);
210 if (ret)
211 return ret;
212
213 ret = mipi_dsi_dcs_exit_sleep_mode(device);
214 if (ret)
215 return ret;
216
217 /* Wait for sleep out exit */
218 mdelay(120);
219
220 /* Default portrait 480x800 rgb24 */
221 dcs_write_seq(dev, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
222
223 ret = mipi_dsi_dcs_set_column_address(device, 0,
224 default_timing.hactive.typ - 1);
225 if (ret)
226 return ret;
227
228 ret = mipi_dsi_dcs_set_page_address(device, 0,
229 default_timing.vactive.typ - 1);
230 if (ret)
231 return ret;
232
233 /* See otm8009a driver documentation for pixel format descriptions */
234 ret = mipi_dsi_dcs_set_pixel_format(device, MIPI_DCS_PIXEL_FMT_24BIT |
235 MIPI_DCS_PIXEL_FMT_24BIT << 4);
236 if (ret)
237 return ret;
238
239 /* Disable CABC feature */
240 dcs_write_seq(dev, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
241
242 ret = mipi_dsi_dcs_set_display_on(device);
243 if (ret)
244 return ret;
245
246 ret = mipi_dsi_dcs_nop(device);
247 if (ret)
248 return ret;
249
250 /* Send Command GRAM memory write (no parameters) */
251 dcs_write_seq(dev, MIPI_DCS_WRITE_MEMORY_START);
252
253 return 0;
254}
255
256static int otm8009a_panel_enable_backlight(struct udevice *dev)
257{
Simon Glassc69cda22020-12-03 16:55:20 -0700258 struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
Yannick Fertré78157b22019-10-07 15:29:08 +0200259 struct mipi_dsi_device *device = plat->device;
260 int ret;
261
262 ret = mipi_dsi_attach(device);
263 if (ret < 0)
264 return ret;
265
266 ret = otm8009a_init_sequence(dev);
267 if (ret)
268 return ret;
269
270 /*
271 * Power on the backlight with the requested brightness
272 * Note We can not use mipi_dsi_dcs_set_display_brightness()
273 * as otm8009a driver support only 8-bit brightness (1 param).
274 */
275 dcs_write_seq(dev, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
276 OTM8009A_BACKLIGHT_DEFAULT);
277
278 /* Update Brightness Control & Backlight */
279 dcs_write_seq(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
280
281 /* Update Brightness Control & Backlight */
282 dcs_write_seq_hs(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY);
283
284 /* Need to wait a few time before sending the first image */
285 mdelay(10);
286
287 return 0;
288}
289
290static int otm8009a_panel_get_display_timing(struct udevice *dev,
291 struct display_timing *timings)
292{
Yannick Fertré78157b22019-10-07 15:29:08 +0200293 memcpy(timings, &default_timing, sizeof(*timings));
294
Yannick Fertré78157b22019-10-07 15:29:08 +0200295 return 0;
296}
297
Simon Glassd1998a92020-12-03 16:55:21 -0700298static int otm8009a_panel_of_to_plat(struct udevice *dev)
Yannick Fertré78157b22019-10-07 15:29:08 +0200299{
300 struct otm8009a_panel_priv *priv = dev_get_priv(dev);
301 int ret;
302
Marek Vasut2d8253c2023-02-28 02:55:20 +0100303 if (CONFIG_IS_ENABLED(DM_REGULATOR)) {
Yannick Fertré78157b22019-10-07 15:29:08 +0200304 ret = device_get_supply_regulator(dev, "power-supply",
305 &priv->reg);
306 if (ret && ret != -ENOENT) {
307 dev_err(dev, "Warning: cannot get power supply\n");
308 return ret;
309 }
310 }
311
312 ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
313 GPIOD_IS_OUT);
314 if (ret) {
315 dev_err(dev, "warning: cannot get reset GPIO\n");
316 if (ret != -ENOENT)
317 return ret;
318 }
319
320 return 0;
321}
322
323static int otm8009a_panel_probe(struct udevice *dev)
324{
325 struct otm8009a_panel_priv *priv = dev_get_priv(dev);
Simon Glassc69cda22020-12-03 16:55:20 -0700326 struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
Yannick Fertré78157b22019-10-07 15:29:08 +0200327 int ret;
328
Marek Vasut2d8253c2023-02-28 02:55:20 +0100329 if (CONFIG_IS_ENABLED(DM_REGULATOR) && priv->reg) {
Yannick Fertré78157b22019-10-07 15:29:08 +0200330 dev_dbg(dev, "enable regulator '%s'\n", priv->reg->name);
331 ret = regulator_set_enable(priv->reg, true);
332 if (ret)
333 return ret;
334 }
335
336 /* reset panel */
337 dm_gpio_set_value(&priv->reset, true);
338 mdelay(1); /* >50us */
339 dm_gpio_set_value(&priv->reset, false);
340 mdelay(10); /* >5ms */
341
Yannick Fertrebccb3852020-06-24 10:45:42 +0200342 /* fill characteristics of DSI data link */
343 plat->lanes = 2;
344 plat->format = MIPI_DSI_FMT_RGB888;
345 plat->mode_flags = MIPI_DSI_MODE_VIDEO |
Yannick Fertré78157b22019-10-07 15:29:08 +0200346 MIPI_DSI_MODE_VIDEO_BURST |
347 MIPI_DSI_MODE_LPM;
348
349 return 0;
350}
351
352static const struct panel_ops otm8009a_panel_ops = {
353 .enable_backlight = otm8009a_panel_enable_backlight,
354 .get_display_timing = otm8009a_panel_get_display_timing,
355};
356
357static const struct udevice_id otm8009a_panel_ids[] = {
358 { .compatible = "orisetech,otm8009a" },
359 { }
360};
361
362U_BOOT_DRIVER(otm8009a_panel) = {
363 .name = "otm8009a_panel",
364 .id = UCLASS_PANEL,
365 .of_match = otm8009a_panel_ids,
366 .ops = &otm8009a_panel_ops,
Simon Glassd1998a92020-12-03 16:55:21 -0700367 .of_to_plat = otm8009a_panel_of_to_plat,
Yannick Fertré78157b22019-10-07 15:29:08 +0200368 .probe = otm8009a_panel_probe,
Simon Glasscaa4daa2020-12-03 16:55:18 -0700369 .plat_auto = sizeof(struct mipi_dsi_panel_plat),
Simon Glass41575d82020-12-03 16:55:17 -0700370 .priv_auto = sizeof(struct otm8009a_panel_priv),
Yannick Fertré78157b22019-10-07 15:29:08 +0200371};