blob: 6058d0f4c13f4455d963c16aa27da03381f7514a [file] [log] [blame]
David Wu8fb32682019-07-11 10:37:14 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright 2019 Rockchip Electronics Co., Ltd
4 */
5
6#include <common.h>
7#include <dm.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -06008#include <log.h>
David Wu8fb32682019-07-11 10:37:14 +02009#include <dm/pinctrl.h>
10#include <regmap.h>
11#include <syscon.h>
Simon Glasscd93d622020-05-10 11:40:13 -060012#include <linux/bitops.h>
David Wu8fb32682019-07-11 10:37:14 +020013
14#include "pinctrl-rockchip.h"
15
16static struct rockchip_mux_route_data px30_mux_route_data[] = {
17 {
18 /* cif-d2m0 */
19 .bank_num = 2,
20 .pin = 0,
21 .func = 1,
22 .route_offset = 0x184,
23 .route_val = BIT(16 + 7),
24 }, {
25 /* cif-d2m1 */
26 .bank_num = 3,
27 .pin = 3,
28 .func = 3,
29 .route_offset = 0x184,
30 .route_val = BIT(16 + 7) | BIT(7),
31 }, {
32 /* pdm-m0 */
33 .bank_num = 3,
34 .pin = 22,
35 .func = 2,
36 .route_offset = 0x184,
37 .route_val = BIT(16 + 8),
38 }, {
39 /* pdm-m1 */
40 .bank_num = 2,
41 .pin = 22,
42 .func = 1,
43 .route_offset = 0x184,
44 .route_val = BIT(16 + 8) | BIT(8),
45 }, {
46 /* uart2-rxm0 */
47 .bank_num = 1,
48 .pin = 27,
49 .func = 2,
50 .route_offset = 0x184,
51 .route_val = BIT(16 + 10),
52 }, {
53 /* uart2-rxm1 */
54 .bank_num = 2,
55 .pin = 14,
56 .func = 2,
57 .route_offset = 0x184,
58 .route_val = BIT(16 + 10) | BIT(10),
59 }, {
60 /* uart3-rxm0 */
61 .bank_num = 0,
62 .pin = 17,
63 .func = 2,
64 .route_offset = 0x184,
65 .route_val = BIT(16 + 9),
66 }, {
67 /* uart3-rxm1 */
68 .bank_num = 1,
69 .pin = 15,
70 .func = 2,
71 .route_offset = 0x184,
72 .route_val = BIT(16 + 9) | BIT(9),
73 },
74};
75
76static int px30_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
77{
78 struct rockchip_pinctrl_priv *priv = bank->priv;
79 int iomux_num = (pin / 8);
80 struct regmap *regmap;
81 int reg, ret, mask, mux_type;
82 u8 bit;
83 u32 data, route_reg, route_val;
84
85 regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
86 ? priv->regmap_pmu : priv->regmap_base;
87
88 /* get basic quadrupel of mux registers and the correct reg inside */
89 mux_type = bank->iomux[iomux_num].type;
90 reg = bank->iomux[iomux_num].offset;
91 reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
92
93 if (bank->route_mask & BIT(pin)) {
94 if (rockchip_get_mux_route(bank, pin, mux, &route_reg,
95 &route_val)) {
96 ret = regmap_write(regmap, route_reg, route_val);
97 if (ret)
98 return ret;
99 }
100 }
101
102 data = (mask << (bit + 16));
103 data |= (mux & mask) << bit;
104 ret = regmap_write(regmap, reg, data);
105
106 return ret;
107}
108
109#define PX30_PULL_PMU_OFFSET 0x10
110#define PX30_PULL_GRF_OFFSET 0x60
111#define PX30_PULL_BITS_PER_PIN 2
112#define PX30_PULL_PINS_PER_REG 8
113#define PX30_PULL_BANK_STRIDE 16
114
115static void px30_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
116 int pin_num, struct regmap **regmap,
117 int *reg, u8 *bit)
118{
119 struct rockchip_pinctrl_priv *priv = bank->priv;
120
121 /* The first 32 pins of the first bank are located in PMU */
122 if (bank->bank_num == 0) {
123 *regmap = priv->regmap_pmu;
124 *reg = PX30_PULL_PMU_OFFSET;
125 } else {
126 *regmap = priv->regmap_base;
127 *reg = PX30_PULL_GRF_OFFSET;
128
129 /* correct the offset, as we're starting with the 2nd bank */
130 *reg -= 0x10;
131 *reg += bank->bank_num * PX30_PULL_BANK_STRIDE;
132 }
133
134 *reg += ((pin_num / PX30_PULL_PINS_PER_REG) * 4);
135 *bit = (pin_num % PX30_PULL_PINS_PER_REG);
136 *bit *= PX30_PULL_BITS_PER_PIN;
137}
138
139static int px30_set_pull(struct rockchip_pin_bank *bank,
140 int pin_num, int pull)
141{
142 struct regmap *regmap;
143 int reg, ret;
144 u8 bit, type;
145 u32 data;
146
147 if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
148 return -ENOTSUPP;
149
150 px30_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
151 type = bank->pull_type[pin_num / 8];
152 ret = rockchip_translate_pull_value(type, pull);
153 if (ret < 0) {
154 debug("unsupported pull setting %d\n", pull);
155 return ret;
156 }
157
158 /* enable the write to the equivalent lower bits */
159 data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
160 data |= (ret << bit);
161 ret = regmap_write(regmap, reg, data);
162
163 return ret;
164}
165
166#define PX30_DRV_PMU_OFFSET 0x20
167#define PX30_DRV_GRF_OFFSET 0xf0
168#define PX30_DRV_BITS_PER_PIN 2
169#define PX30_DRV_PINS_PER_REG 8
170#define PX30_DRV_BANK_STRIDE 16
171
172static void px30_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
173 int pin_num, struct regmap **regmap,
174 int *reg, u8 *bit)
175{
176 struct rockchip_pinctrl_priv *priv = bank->priv;
177
178 /* The first 32 pins of the first bank are located in PMU */
179 if (bank->bank_num == 0) {
180 *regmap = priv->regmap_pmu;
181 *reg = PX30_DRV_PMU_OFFSET;
182 } else {
183 *regmap = priv->regmap_base;
184 *reg = PX30_DRV_GRF_OFFSET;
185
186 /* correct the offset, as we're starting with the 2nd bank */
187 *reg -= 0x10;
188 *reg += bank->bank_num * PX30_DRV_BANK_STRIDE;
189 }
190
191 *reg += ((pin_num / PX30_DRV_PINS_PER_REG) * 4);
192 *bit = (pin_num % PX30_DRV_PINS_PER_REG);
193 *bit *= PX30_DRV_BITS_PER_PIN;
194}
195
196static int px30_set_drive(struct rockchip_pin_bank *bank,
197 int pin_num, int strength)
198{
199 struct regmap *regmap;
200 int reg, ret;
201 u32 data, rmask_bits, temp;
202 u8 bit;
203 int drv_type = bank->drv[pin_num / 8].drv_type;
204
205 px30_calc_drv_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
206 ret = rockchip_translate_drive_value(drv_type, strength);
207 if (ret < 0) {
208 debug("unsupported driver strength %d\n", strength);
209 return ret;
210 }
211
212 switch (drv_type) {
213 case DRV_TYPE_IO_1V8_3V0_AUTO:
214 case DRV_TYPE_IO_3V3_ONLY:
215 rmask_bits = ROCKCHIP_DRV_3BITS_PER_PIN;
216 switch (bit) {
217 case 0 ... 12:
218 /* regular case, nothing to do */
219 break;
220 case 15:
221 /*
222 * drive-strength offset is special, as it is spread
223 * over 2 registers, the bit data[15] contains bit 0
224 * of the value while temp[1:0] contains bits 2 and 1
225 */
226 data = (ret & 0x1) << 15;
227 temp = (ret >> 0x1) & 0x3;
228
229 data |= BIT(31);
230 ret = regmap_write(regmap, reg, data);
231 if (ret)
232 return ret;
233
234 temp |= (0x3 << 16);
235 reg += 0x4;
236 ret = regmap_write(regmap, reg, temp);
237
238 return ret;
239 case 18 ... 21:
240 /* setting fully enclosed in the second register */
241 reg += 4;
242 bit -= 16;
243 break;
244 default:
245 debug("unsupported bit: %d for pinctrl drive type: %d\n",
246 bit, drv_type);
247 return -EINVAL;
248 }
249 break;
250 case DRV_TYPE_IO_DEFAULT:
251 case DRV_TYPE_IO_1V8_OR_3V0:
252 case DRV_TYPE_IO_1V8_ONLY:
253 rmask_bits = ROCKCHIP_DRV_BITS_PER_PIN;
254 break;
255 default:
256 debug("unsupported pinctrl drive type: %d\n",
257 drv_type);
258 return -EINVAL;
259 }
260
261 /* enable the write to the equivalent lower bits */
262 data = ((1 << rmask_bits) - 1) << (bit + 16);
263 data |= (ret << bit);
264 ret = regmap_write(regmap, reg, data);
265
266 return ret;
267}
268
269#define PX30_SCHMITT_PMU_OFFSET 0x38
270#define PX30_SCHMITT_GRF_OFFSET 0xc0
271#define PX30_SCHMITT_PINS_PER_PMU_REG 16
272#define PX30_SCHMITT_BANK_STRIDE 16
273#define PX30_SCHMITT_PINS_PER_GRF_REG 8
274
275static int px30_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
276 int pin_num,
277 struct regmap **regmap,
278 int *reg, u8 *bit)
279{
280 struct rockchip_pinctrl_priv *priv = bank->priv;
281 int pins_per_reg;
282
283 if (bank->bank_num == 0) {
284 *regmap = priv->regmap_pmu;
285 *reg = PX30_SCHMITT_PMU_OFFSET;
286 pins_per_reg = PX30_SCHMITT_PINS_PER_PMU_REG;
287 } else {
288 *regmap = priv->regmap_base;
289 *reg = PX30_SCHMITT_GRF_OFFSET;
290 pins_per_reg = PX30_SCHMITT_PINS_PER_GRF_REG;
291 *reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE;
292 }
293 *reg += ((pin_num / pins_per_reg) * 4);
294 *bit = pin_num % pins_per_reg;
295
296 return 0;
297}
298
299static int px30_set_schmitt(struct rockchip_pin_bank *bank,
300 int pin_num, int enable)
301{
302 struct regmap *regmap;
303 int reg;
304 u8 bit;
305 u32 data;
306
307 px30_calc_schmitt_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
308 /* enable the write to the equivalent lower bits */
309 data = BIT(bit + 16) | (enable << bit);
310
311 return regmap_write(regmap, reg, data);
312}
313
314static struct rockchip_pin_bank px30_pin_banks[] = {
315 PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
316 IOMUX_SOURCE_PMU,
317 IOMUX_SOURCE_PMU,
318 IOMUX_SOURCE_PMU
319 ),
320 PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_4BIT,
321 IOMUX_WIDTH_4BIT,
322 IOMUX_WIDTH_4BIT,
323 IOMUX_WIDTH_4BIT
324 ),
325 PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_4BIT,
326 IOMUX_WIDTH_4BIT,
327 IOMUX_WIDTH_4BIT,
328 IOMUX_WIDTH_4BIT
329 ),
330 PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_4BIT,
331 IOMUX_WIDTH_4BIT,
332 IOMUX_WIDTH_4BIT,
333 IOMUX_WIDTH_4BIT
334 ),
335};
336
337static struct rockchip_pin_ctrl px30_pin_ctrl = {
338 .pin_banks = px30_pin_banks,
339 .nr_banks = ARRAY_SIZE(px30_pin_banks),
340 .grf_mux_offset = 0x0,
341 .pmu_mux_offset = 0x0,
342 .grf_drv_offset = 0xf0,
343 .pmu_drv_offset = 0x20,
344 .iomux_routes = px30_mux_route_data,
345 .niomux_routes = ARRAY_SIZE(px30_mux_route_data),
346 .set_mux = px30_set_mux,
347 .set_pull = px30_set_pull,
348 .set_drive = px30_set_drive,
349 .set_schmitt = px30_set_schmitt,
350};
351
352static const struct udevice_id px30_pinctrl_ids[] = {
353 {
354 .compatible = "rockchip,px30-pinctrl",
355 .data = (ulong)&px30_pin_ctrl
356 },
357 { }
358};
359
360U_BOOT_DRIVER(pinctrl_px30) = {
361 .name = "rockchip_px30_pinctrl",
362 .id = UCLASS_PINCTRL,
363 .of_match = px30_pinctrl_ids,
Simon Glass41575d82020-12-03 16:55:17 -0700364 .priv_auto = sizeof(struct rockchip_pinctrl_priv),
David Wu8fb32682019-07-11 10:37:14 +0200365 .ops = &rockchip_pinctrl_ops,
366#if !CONFIG_IS_ENABLED(OF_PLATDATA)
367 .bind = dm_scan_fdt_dev,
368#endif
369 .probe = rockchip_pinctrl_probe,
370};