Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / d6afc6b3a04aaf3f7494d3510c401bbde4db2ca0 / . / arch / arm / dts / imx7ulp.dtsi
blob: 7bcd2cc34697f42f09a3268da999771a08daa546 [file] [log] [blame]
Peng Fanfa2f20d2017-02-22 16:21:54 +0800[diff] [blame]1/*
2 * Copyright 2015-2016 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx7ulp-clock.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11#include <dt-bindings/gpio/gpio.h>
12#include "skeleton.dtsi"
13#include "imx7ulp-pinfunc.h"
14
15/ {
16 interrupt-parent = <&intc>;
17
18 aliases {
Fabio Estevam2d4b87f2019-11-05 09:47:54 -0300[diff] [blame]19 gpio0 = &gpio4;
20 gpio1 = &gpio5;
21 gpio2 = &gpio0;
22 gpio3 = &gpio1;
23 gpio4 = &gpio2;
24 gpio5 = &gpio3;
Peng Fanfa2f20d2017-02-22 16:21:54 +0800[diff] [blame]25 mmc0 = &usdhc0;
26 mmc1 = &usdhc1;
27 serial0 = &lpuart4;
28 serial1 = &lpuart5;
29 serial2 = &lpuart6;
30 serial3 = &lpuart7;
31 usbphy0 = &usbphy1;
Fabio Estevam2d4b87f2019-11-05 09:47:54 -0300[diff] [blame]32 usb0 = &usbotg1;
Peng Fan34b0af82018-01-02 15:41:53 +0800[diff] [blame]33 i2c4 = &lpi2c4;
34 i2c5 = &lpi2c5;
35 i2c6 = &lpi2c6;
36 i2c7 = &lpi2c7;
Fabio Estevam2d4b87f2019-11-05 09:47:54 -0300[diff] [blame]37 spi0 = &qspi1;
Peng Fanfa2f20d2017-02-22 16:21:54 +0800[diff] [blame]38 };
39
40 cpus {
41 #address-cells = <1>;
42 #size-cells = <0>;
43
44 cpu0: cpu@0 {
45 compatible = "arm,cortex-a7";
46 device_type = "cpu";
47 reg = <0>;
48 };
49 };
50
51 reserved-memory {
52 #address-cells = <1>;
53 #size-cells = <1>;
54 ranges;
55
56 /* global autoconfigured region for contiguous allocations */
57 linux,cma {
58 compatible = "shared-dma-pool";
59 reusable;
60 size = <0xC000000>;
61 alignment = <0x2000>;
62 linux,cma-default;
63 };
64
65 rpmsg_reserved: rpmsg@9FFF0000 {
66 no-map;
67 reg = <0x9FF00000 0x100000>;
68 };
69
70 };
71
72 intc: interrupt-controller@40021000 {
73 compatible = "arm,cortex-a7-gic";
74 #interrupt-cells = <3>;
75 interrupt-controller;
76 reg = <0x40021000 0x1000>,
77 <0x40022000 0x100>;
78 };
79
80 clocks {
81 #address-cells = <1>;
82 #size-cells = <0>;
83
84 ckil: clock@0 {
85 compatible = "fixed-clock";
86 #clock-cells = <0>;
87 clock-frequency = <32768>;
88 clock-output-names = "ckil";
89 };
90
91 osc: clock@1 {
92 compatible = "fixed-clock";
93 #clock-cells = <0>;
94 clock-frequency = <24000000>;
95 clock-output-names = "osc";
96 };
97
98 sirc: clock@2 {
99 compatible = "fixed-clock";
100 #clock-cells = <0>;
101 clock-frequency = <16000000>;
102 clock-output-names = "sirc";
103 };
104
105 firc: clock@3 {
106 compatible = "fixed-clock";
107 #clock-cells = <0>;
108 clock-frequency = <48000000>;
109 clock-output-names = "firc";
110 };
111
112 upll: clock@4 {
113 compatible = "fixed-clock";
114 #clock-cells = <0>;
115 clock-frequency = <480000000>;
116 clock-output-names = "upll";
117 };
118
119 mpll: clock@5 {
120 compatible = "fixed-clock";
121 #clock-cells = <0>;
122 clock-frequency = <480000000>;
123 clock-output-names = "mpll";
124 };
125 };
126
127 sram: sram@20000000 {
128 compatible = "fsl,lpm-sram";
129 reg = <0x1fffc000 0x4000>;
130 };
131
132 ahbbridge0: ahb-bridge0@40000000 {
133 compatible = "fsl,aips-bus", "simple-bus";
134 #address-cells = <1>;
135 #size-cells = <1>;
136 reg = <0x40000000 0x800000>;
137 ranges;
138
139 edma0: dma-controller@40080000 {
140 #dma-cells = <2>;
141 compatible = "nxp,imx7ulp-edma";
142 reg = <0x40080000 0x2000>,
143 <0x40210000 0x1000>;
144 dma-channels = <32>;
145 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
146 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
147 <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
148 <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
149 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
150 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
151 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
152 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
153 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
154 <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
155 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
156 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
157 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
158 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
159 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
160 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
161 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
162 clock-names = "dma", "dmamux0";
163 clocks = <&clks IMX7ULP_CLK_DMA1>, <&clks IMX7ULP_CLK_DMA_MUX1>;
164 };
165
166 mu: mu@40220000 {
167 compatible = "fsl,imx7ulp-mu", "fsl,imx6sx-mu";
168 reg = <0x40220000 0x1000>;
169 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
170 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
171 status = "okay";
172 };
173
174 nmi: nmi@40220000 {
175 compatible = "fsl,imx7ulp-nmi";
176 reg = <0x40220000 0x1000>;
177 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
178 status = "okay";
179 };
180
181 rpmsg: rpmsg{
182 compatible = "fsl,imx7ulp-rpmsg";
183 memory-region = <&rpmsg_reserved>;
184 status = "disabled";
185 };
186
187 snvs: snvs@40230000 {
188 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
189 reg = <0x40230000 0x10000>;
190
191 snvs_rtc: snvs-rtc-lp{
192 compatible = "fsl,sec-v4.0-mon-rtc-lp";
193 regmap =<&snvs>;
194 offset = <0x34>;
195 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
196 clock-names = "snvs-rtc";
197 clocks = <&clks IMX7ULP_CLK_SNVS>;
198 };
199 };
200
201 tpm5: tpm@40260000 {
202 compatible = "fsl,imx7ulp-tpm";
203 reg = <0x40260000 0x1000>;
204 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
205 clocks = <&clks IMX7ULP_CLK_LPTPM5>;
206 };
207
208 lpit: 1@40270000 {
209 compatible = "fsl,imx-lpit";
210 reg = <0x40270000 0x1000>;
211 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
212 /* clocks = <&lpclk>;*/
213 clocks = <&clks IMX7ULP_CLK_LPIT1>;
214 assigned-clock-rates = <48000000>;
215 assigned-clocks = <&clks IMX7ULP_CLK_LPIT1>;
216 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
217 };
218
219 lpi2c4: lpi2c4@402B0000 {
220 compatible = "fsl,imx7ulp-lpi2c";
221 reg = <0x402B0000 0x10000>;
222 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
223 clocks = <&clks IMX7ULP_CLK_LPI2C4>;
224 clock-names = "ipg";
225 assigned-clocks = <&clks IMX7ULP_CLK_LPI2C4>;
226 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
227 assigned-clock-rates = <48000000>;
228 status = "disabled";
229 };
230
231 lpi2c5: lpi2c4@402C0000 {
232 compatible = "fsl,imx7ulp-lpi2c";
233 reg = <0x402C0000 0x10000>;
234 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
235 clocks = <&clks IMX7ULP_CLK_LPI2C5>;
236 clock-names = "ipg";
237 assigned-clocks = <&clks IMX7ULP_CLK_LPI2C5>;
238 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
239 assigned-clock-rates = <48000000>;
240 status = "disabled";
241 };
242
243 lpspi2: lpspi@40290000 {
244 compatible = "fsl,imx7ulp-spi";
245 reg = <0x40290000 0x10000>;
246 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
247 clocks = <&clks IMX7ULP_CLK_LPSPI2>;
248 clock-names = "ipg";
249 assigned-clocks = <&clks IMX7ULP_CLK_LPSPI2>;
250 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
251 assigned-clock-rates = <48000000>;
252 status = "disabled";
253 };
254
255 lpspi3: lpspi@402A0000 {
256 compatible = "fsl,imx7ulp-spi";
257 reg = <0x402A0000 0x10000>;
258 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
259 clocks = <&clks IMX7ULP_CLK_LPSPI3>;
260 clock-names = "ipg";
261 assigned-clocks = <&clks IMX7ULP_CLK_LPSPI3>;
262 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
263 assigned-clock-rates = <48000000>;
264 status = "disabled";
265 };
266
267 lpuart4: serial@402D0000 {
268 compatible = "fsl,imx7ulp-lpuart";
269 reg = <0x402D0000 0x1000>;
270 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
271 clocks = <&clks IMX7ULP_CLK_LPUART4>;
272 clock-names = "ipg";
273 assigned-clocks = <&clks IMX7ULP_CLK_LPUART4>;
274 assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>;
275 assigned-clock-rates = <24000000>;
276 status = "disabled";
277 };
278
279 lpuart5: serial@402E0000 {
280 compatible = "fsl,imx7ulp-lpuart";
281 reg = <0x402E0000 0x1000>;
282 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
283 clocks = <&clks IMX7ULP_CLK_LPUART5>;
284 clock-names = "ipg";
285 assigned-clocks = <&clks IMX7ULP_CLK_LPUART5>;
286 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
287 assigned-clock-rates = <48000000>;
288 dmas = <&edma0 0 20>, <&edma0 0 19>;
289 dma-names = "tx","rx";
290 status = "disabled";
291 };
292
293 usbotg1: usb@40330000 {
294 compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb",
295 "fsl,imx27-usb";
296 reg = <0x40330000 0x200>;
297 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
298 clocks = <&clks IMX7ULP_CLK_USB0>;
299 fsl,usbphy = <&usbphy1>;
300 fsl,usbmisc = <&usbmisc1 0>;
301 ahb-burst-config = <0x0>;
302 tx-burst-size-dword = <0x8>;
303 rx-burst-size-dword = <0x8>;
304 status = "disabled";
305 };
306
307 usbmisc1: usbmisc@40330200 {
308 #index-cells = <1>;
309 compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
310 "fsl,imx6q-usbmisc";
311 reg = <0x40330200 0x200>;
312 };
313
314 usbphy1: usbphy@0x40350000 {
315 compatible = "fsl,imx7ulp-usbphy",
316 "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
317 reg = <0x40350000 0x1000>;
318 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
319 clocks = <&clks IMX7ULP_CLK_USB_PHY>;
320 nxp,sim = <&sim>;
321 };
322
323 usdhc0: usdhc@40370000 {
324 compatible = "fsl,imx7ulp-usdhc";
325 reg = <0x40370000 0x10000>;
326 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
327 clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
328 <&clks IMX7ULP_CLK_NIC1_DIV>,
329 <&clks IMX7ULP_CLK_USDHC0>;
330 clock-names ="ipg", "ahb", "per";
331 bus-width = <4>;
332 fsl,tuning-start-tap = <20>;
333 fsl,tuning-step= <2>;
334 status = "disabled";
335 };
336
337 usdhc1: usdhc@40380000 {
338 compatible = "fsl,imx7ulp-usdhc";
339 reg = <0x40380000 0x10000>;
340 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
341 clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
342 <&clks IMX7ULP_CLK_NIC1_DIV>,
343 <&clks IMX7ULP_CLK_USDHC1>;
344 clock-names ="ipg", "ahb", "per";
345 bus-width = <4>;
346 fsl,tuning-start-tap = <20>;
347 fsl,tuning-step= <2>;
348 status = "disabled";
349 };
350
351 wdog1: wdog@403D0000 {
352 compatible = "fsl,imx7ulp-wdt";
353 reg = <0x403D0000 0x10000>;
354 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
355 clocks = <&clks IMX7ULP_CLK_WDG1>;
356 assigned-clocks = <&clks IMX7ULP_CLK_WDG1>;
357 assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>;
358 /*
359 * As the 1KHz LPO clock rate is not trimed,the actually clock
360 * is about 667Hz, so the init timeout 60s should set 40*1000
361 * in the TOVAL register.
362 */
363 timeout-sec = <40>;
364 };
365
366 wdog2: wdog@40430000 {
367 compatible = "fsl,imx7ulp-wdt";
368 reg = <0x40430000 0x10000>;
369 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
370 clocks = <&clks IMX7ULP_CLK_WDG2>;
371 assigned-clocks = <&clks IMX7ULP_CLK_WDG2>;
372 assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>;
373 timeout-sec = <40>;
374 };
375
376 clks: scg1@403E0000 {
377 compatible = "fsl,imx7ulp-scg1";
378 reg = <0x403E0000 0x10000>;
379 clocks = <&ckil>, <&osc>, <&sirc>,
380 <&firc>, <&upll>, <&mpll>;
381 clock-names = "ckil", "osc", "sirc",
382 "firc", "upll", "mpll";
383 #clock-cells = <1>;
384 assigned-clocks = <&clks IMX7ULP_CLK_LPTPM5>,
385 <&clks IMX7ULP_CLK_USDHC1>;
386 assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>,
387 <&clks IMX7ULP_CLK_NIC1_DIV>;
388 };
389
390 pcc2: pcc2@403F0000 {
391 compatible = "fsl,imx7ulp-pcc2";
392 reg = <0x403F0000 0x10000>;
393 };
394
395 pmc1: pmc1@40400000 {
396 compatible = "fsl,imx7ulp-pmc1";
397 reg = <0x40400000 0x1000>;
398 };
399
400 smc1: smc1@40410000 {
401 compatible = "fsl,imx7ulp-smc1";
402 reg = <0x40410000 0x1000>;
403 };
404
405 };
406
407 ahbbridge1: ahb-bridge1@40800000 {
408 compatible = "fsl,aips-bus", "simple-bus";
409 #address-cells = <1>;
410 #size-cells = <1>;
411 reg = <0x40800000 0x800000>;
412 ranges;
413
414 lpi2c6: lpi2c6@40A40000 {
415 compatible = "fsl,imx7ulp-lpi2c";
416 reg = <0x40A40000 0x10000>;
417 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
418 clocks = <&clks IMX7ULP_CLK_LPI2C6>;
419 clock-names = "ipg";
420 assigned-clocks = <&clks IMX7ULP_CLK_LPI2C6>;
421 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
422 assigned-clock-rates = <48000000>;
423 status = "disabled";
424 };
425
426 lpi2c7: lpi2c7@40A50000 {
427 compatible = "fsl,imx7ulp-lpi2c";
428 reg = <0x40A50000 0x10000>;
429 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
430 clocks = <&clks IMX7ULP_CLK_LPI2C7>;
431 clock-names = "ipg";
432 assigned-clocks = <&clks IMX7ULP_CLK_LPI2C7>;
433 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
434 assigned-clock-rates = <48000000>;
435 status = "disabled";
436 };
437
438 lpuart6: serial@40A60000 {
439 compatible = "fsl,imx7ulp-lpuart";
440 reg = <0x40A60000 0x1000>;
441 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
442 clocks = <&clks IMX7ULP_CLK_LPUART6>;
443 clock-names = "ipg";
444 assigned-clocks = <&clks IMX7ULP_CLK_LPUART6>;
445 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
446 assigned-clock-rates = <48000000>;
447 dmas = <&edma0 0 22>, <&edma0 0 21>;
448 dma-names = "tx","rx";
449 status = "disabled";
450 };
451
452 lpuart7: serial@40A70000 {
453 compatible = "fsl,imx7ulp-lpuart";
454 reg = <0x40A70000 0x1000>;
455 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
456 clocks = <&clks IMX7ULP_CLK_LPUART7>;
457 clock-names = "ipg";
458 assigned-clocks = <&clks IMX7ULP_CLK_LPUART7>;
459 assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
460 assigned-clock-rates = <50000000>;
461 dmas = <&edma0 0 24>, <&edma0 0 23>;
462 dma-names = "tx","rx";
463 status = "disabled";
464 };
465
466 lcdif: lcdif@40AA0000 {
467 compatible = "fsl,imx7ulp-lcdif";
468 reg = <0x40aa0000 0x10000>;
469 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
470 clocks = <&clks IMX7ULP_CLK_DUMMY>,
471 <&clks IMX7ULP_CLK_LCDIF>,
472 <&clks IMX7ULP_CLK_DUMMY>;
473 clock-names = "axi", "pix", "disp_axi";
474 status = "disabled";
475 };
476
477 mipi_dsi: mipi_dsi@40A90000 {
478 compatible = "fsl,imx7ulp-mipi-dsi";
479 reg = <0x40A90000 0x10000>;
480 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
481 clocks = <&clks IMX7ULP_CLK_DSI>;
482 clock-names = "mipi_dsi_clk";
483 sim = <&sim>;
484 status = "disabled";
485 };
486
487 mmdc: mmdc@40ab0000 {
488 compatible = "fsl,imx7ulp-mmdc";
489 reg = <0x40ab0000 0x4000>;
490 };
491
492 pcc3: pcc3@40B30000 {
493 compatible = "fsl,imx7ulp-pcc3";
494 reg = <0x40B30000 0x10000>;
495 };
496
497 iomuxc: iomuxc@4103D000 {
498 compatible = "fsl,imx7ulp-iomuxc-0";
499 reg = <0x4103D000 0x1000>;
500 fsl,mux_mask = <0xf00>;
501 status = "disabled";
502 };
503
504 iomuxc1: iomuxc1@40ac0000 {
505 compatible = "fsl,imx7ulp-iomuxc-1";
506 reg = <0x40ac0000 0x1000>;
507 fsl,mux_mask = <0xf00>;
508 };
509
Fabio Estevam2d4b87f2019-11-05 09:47:54 -0300[diff] [blame]510 gpio4: gpio@4103f000 {
511 compatible = "fsl,imx7ulp-gpio";
512 reg = <0x4103f000 0x1000 0x4100F000 0x40>;
513 gpio-controller;
514 #gpio-cells = <2>;
515 gpio-ranges = <&iomuxc 0 0 32>;
516 };
517
518 gpio5: gpio@41040000 {
519 compatible = "fsl,imx7ulp-gpio";
520 reg = <0x41040000 0x1000 0x4100F040 0x40>;
521 gpio-controller;
522 #gpio-cells = <2>;
523 gpio-ranges = <&iomuxc 0 32 32>;
524 };
525
Peng Fanfa2f20d2017-02-22 16:21:54 +0800[diff] [blame]526 gpio0: gpio@40ae0000 {
527 compatible = "fsl,imx7ulp-gpio";
528 reg = <0x40ae0000 0x1000 0x400F0000 0x40>;
529 gpio-controller;
530 #gpio-cells = <2>;
531 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
532 interrupt-controller;
533 #interrupt-cells = <2>;
534 gpio-ranges = <&iomuxc1 0 0 32>;
535 };
536
537 gpio1: gpio@40af0000 {
538 compatible = "fsl,imx7ulp-gpio";
539 reg = <0x40af0000 0x1000 0x400F0040 0x40>;
540 gpio-controller;
541 #gpio-cells = <2>;
542 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
543 interrupt-controller;
544 #interrupt-cells = <2>;
545 gpio-ranges = <&iomuxc1 0 32 32>;
546 };
547
548 gpio2: gpio@40b00000 {
549 compatible = "fsl,imx7ulp-gpio";
550 reg = <0x40b00000 0x1000 0x400F0080 0x40>;
551 gpio-controller;
552 #gpio-cells = <2>;
553 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
554 interrupt-controller;
555 #interrupt-cells = <2>;
556 gpio-ranges = <&iomuxc1 0 64 32>;
557 };
558
559 gpio3: gpio@40b10000 {
560 compatible = "fsl,imx7ulp-gpio";
561 reg = <0x40b10000 0x1000 0x400F00c0 0x40>;
562 gpio-controller;
563 #gpio-cells = <2>;
564 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
565 interrupt-controller;
566 #interrupt-cells = <2>;
567 gpio-ranges = <&iomuxc1 0 96 32>;
568 };
569
570 pmc0: pmc0@410a1000 {
571 compatible = "fsl,imx7ulp-pmc0";
572 reg = <0x410a1000 0x1000>;
573 };
574
575 sim: sim@410a3000 {
576 compatible = "fsl,imx7ulp-sim", "syscon";
577 reg = <0x410a3000 0x1000>;
578 };
579
580 qspi1: qspi@410A5000 {
581 #address-cells = <1>;
582 #size-cells = <0>;
583 compatible = "fsl,imx7ulp-qspi";
584 reg = <0x410A5000 0x10000>, <0xC0000000 0x10000000>;
585 reg-names = "QuadSPI", "QuadSPI-memory";
586 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
587 clocks = <&clks IMX7ULP_CLK_DUMMY>,
588 <&clks IMX7ULP_CLK_DUMMY>;
589 clock-names = "qspi_en", "qspi";
590 status = "disabled";
591 };
592
593 gpu: gpu@41800000 {
594 compatible = "fsl,imx6q-gpu";
595 reg = <0x41800000 0x80000>, <0x41880000 0x80000>,
596 <0x60000000 0x40000000>, <0x0 0x4000000>;
597 reg-names = "iobase_3d", "iobase_2d",
598 "phys_baseaddr", "contiguous_mem";
599 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
600 <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
601 interrupt-names = "irq_3d", "irq_2d";
602 clocks = <&clks IMX7ULP_CLK_GPU3D>,
603 <&clks IMX7ULP_CLK_NIC1_DIV>,
604 <&clks IMX7ULP_CLK_GPU_DIV>,
605 <&clks IMX7ULP_CLK_GPU2D>,
606 <&clks IMX7ULP_CLK_NIC1_DIV>,
607 <&clks IMX7ULP_CLK_NIC1_DIV>;
608 clock-names = "gpu3d_clk", "gpu3d_shader_clk",
609 "gpu3d_axi_clk", "gpu2d_clk",
610 "gpu2d_shader_clk", "gpu2d_axi_clk";
611 };
612 };
613
614 imx_ion {
615 compatible = "fsl,mxc-ion";
616 fsl,heap-id = <0>;
617 };
618};