Vipin KUMAR | 5b1b188 | 2010-06-29 10:53:34 +0530 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2010 |
| 3 | * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | /* |
| 25 | * Designware ethernet IP driver for u-boot |
| 26 | */ |
| 27 | |
| 28 | #include <common.h> |
| 29 | #include <miiphy.h> |
| 30 | #include <malloc.h> |
| 31 | #include <linux/err.h> |
| 32 | #include <asm/io.h> |
| 33 | #include "designware.h" |
| 34 | |
| 35 | static void tx_descs_init(struct eth_device *dev) |
| 36 | { |
| 37 | struct dw_eth_dev *priv = dev->priv; |
| 38 | struct eth_dma_regs *dma_p = priv->dma_regs_p; |
| 39 | struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0]; |
| 40 | char *txbuffs = &priv->txbuffs[0]; |
| 41 | struct dmamacdescr *desc_p; |
| 42 | u32 idx; |
| 43 | |
| 44 | for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) { |
| 45 | desc_p = &desc_table_p[idx]; |
| 46 | desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE]; |
| 47 | desc_p->dmamac_next = &desc_table_p[idx + 1]; |
| 48 | |
| 49 | #if defined(CONFIG_DW_ALTDESCRIPTOR) |
| 50 | desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST | |
| 51 | DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \ |
| 52 | DESC_TXSTS_TXCHECKINSCTRL | \ |
| 53 | DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS); |
| 54 | |
| 55 | desc_p->txrx_status |= DESC_TXSTS_TXCHAIN; |
| 56 | desc_p->dmamac_cntl = 0; |
| 57 | desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA); |
| 58 | #else |
| 59 | desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN; |
| 60 | desc_p->txrx_status = 0; |
| 61 | #endif |
| 62 | } |
| 63 | |
| 64 | /* Correcting the last pointer of the chain */ |
| 65 | desc_p->dmamac_next = &desc_table_p[0]; |
| 66 | |
| 67 | writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr); |
| 68 | } |
| 69 | |
| 70 | static void rx_descs_init(struct eth_device *dev) |
| 71 | { |
| 72 | struct dw_eth_dev *priv = dev->priv; |
| 73 | struct eth_dma_regs *dma_p = priv->dma_regs_p; |
| 74 | struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0]; |
| 75 | char *rxbuffs = &priv->rxbuffs[0]; |
| 76 | struct dmamacdescr *desc_p; |
| 77 | u32 idx; |
| 78 | |
| 79 | for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) { |
| 80 | desc_p = &desc_table_p[idx]; |
| 81 | desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE]; |
| 82 | desc_p->dmamac_next = &desc_table_p[idx + 1]; |
| 83 | |
| 84 | desc_p->dmamac_cntl = |
| 85 | (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \ |
| 86 | DESC_RXCTRL_RXCHAIN; |
| 87 | |
| 88 | desc_p->txrx_status = DESC_RXSTS_OWNBYDMA; |
| 89 | } |
| 90 | |
| 91 | /* Correcting the last pointer of the chain */ |
| 92 | desc_p->dmamac_next = &desc_table_p[0]; |
| 93 | |
| 94 | writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr); |
| 95 | } |
| 96 | |
| 97 | static void descs_init(struct eth_device *dev) |
| 98 | { |
| 99 | tx_descs_init(dev); |
| 100 | rx_descs_init(dev); |
| 101 | } |
| 102 | |
| 103 | static int mac_reset(struct eth_device *dev) |
| 104 | { |
| 105 | struct dw_eth_dev *priv = dev->priv; |
| 106 | struct eth_mac_regs *mac_p = priv->mac_regs_p; |
| 107 | struct eth_dma_regs *dma_p = priv->dma_regs_p; |
| 108 | |
| 109 | int timeout = CONFIG_MACRESET_TIMEOUT; |
| 110 | |
| 111 | writel(DMAMAC_SRST, &dma_p->busmode); |
| 112 | writel(MII_PORTSELECT, &mac_p->conf); |
| 113 | |
| 114 | do { |
| 115 | if (!(readl(&dma_p->busmode) & DMAMAC_SRST)) |
| 116 | return 0; |
| 117 | udelay(1000); |
| 118 | } while (timeout--); |
| 119 | |
| 120 | return -1; |
| 121 | } |
| 122 | |
| 123 | static int dw_write_hwaddr(struct eth_device *dev) |
| 124 | { |
| 125 | struct dw_eth_dev *priv = dev->priv; |
| 126 | struct eth_mac_regs *mac_p = priv->mac_regs_p; |
| 127 | u32 macid_lo, macid_hi; |
| 128 | u8 *mac_id = &dev->enetaddr[0]; |
| 129 | |
| 130 | macid_lo = mac_id[0] + (mac_id[1] << 8) + \ |
| 131 | (mac_id[2] << 16) + (mac_id[3] << 24); |
| 132 | macid_hi = mac_id[4] + (mac_id[5] << 8); |
| 133 | |
| 134 | writel(macid_hi, &mac_p->macaddr0hi); |
| 135 | writel(macid_lo, &mac_p->macaddr0lo); |
| 136 | |
| 137 | return 0; |
| 138 | } |
| 139 | |
| 140 | static int dw_eth_init(struct eth_device *dev, bd_t *bis) |
| 141 | { |
| 142 | struct dw_eth_dev *priv = dev->priv; |
| 143 | struct eth_mac_regs *mac_p = priv->mac_regs_p; |
| 144 | struct eth_dma_regs *dma_p = priv->dma_regs_p; |
| 145 | u32 conf; |
| 146 | |
| 147 | /* Reset ethernet hardware */ |
| 148 | if (mac_reset(dev) < 0) |
| 149 | return -1; |
| 150 | |
| 151 | writel(FIXEDBURST | PRIORXTX_41 | BURST_16, |
| 152 | &dma_p->busmode); |
| 153 | |
| 154 | writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode); |
| 155 | writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode); |
| 156 | |
| 157 | conf = FRAMEBURSTENABLE | DISABLERXOWN; |
| 158 | |
| 159 | if (priv->speed != SPEED_1000M) |
| 160 | conf |= MII_PORTSELECT; |
| 161 | |
| 162 | if (priv->duplex == FULL_DUPLEX) |
| 163 | conf |= FULLDPLXMODE; |
| 164 | |
| 165 | writel(conf, &mac_p->conf); |
| 166 | |
| 167 | descs_init(dev); |
| 168 | |
| 169 | /* |
| 170 | * Start/Enable xfer at dma as well as mac level |
| 171 | */ |
| 172 | writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode); |
| 173 | writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode); |
| 174 | |
| 175 | writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf); |
| 176 | writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf); |
| 177 | |
| 178 | return 0; |
| 179 | } |
| 180 | |
| 181 | static int dw_eth_send(struct eth_device *dev, volatile void *packet, |
| 182 | int length) |
| 183 | { |
| 184 | struct dw_eth_dev *priv = dev->priv; |
| 185 | struct eth_dma_regs *dma_p = priv->dma_regs_p; |
| 186 | u32 desc_num = priv->tx_currdescnum; |
| 187 | struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num]; |
| 188 | |
| 189 | /* Check if the descriptor is owned by CPU */ |
| 190 | if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) { |
| 191 | printf("CPU not owner of tx frame\n"); |
| 192 | return -1; |
| 193 | } |
| 194 | |
| 195 | memcpy((void *)desc_p->dmamac_addr, (void *)packet, length); |
| 196 | |
| 197 | #if defined(CONFIG_DW_ALTDESCRIPTOR) |
| 198 | desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST; |
| 199 | desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \ |
| 200 | DESC_TXCTRL_SIZE1MASK; |
| 201 | |
| 202 | desc_p->txrx_status &= ~(DESC_TXSTS_MSK); |
| 203 | desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA; |
| 204 | #else |
| 205 | desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \ |
| 206 | DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \ |
| 207 | DESC_TXCTRL_TXFIRST; |
| 208 | |
| 209 | desc_p->txrx_status = DESC_TXSTS_OWNBYDMA; |
| 210 | #endif |
| 211 | |
| 212 | /* Test the wrap-around condition. */ |
| 213 | if (++desc_num >= CONFIG_TX_DESCR_NUM) |
| 214 | desc_num = 0; |
| 215 | |
| 216 | priv->tx_currdescnum = desc_num; |
| 217 | |
| 218 | /* Start the transmission */ |
| 219 | writel(POLL_DATA, &dma_p->txpolldemand); |
| 220 | |
| 221 | return 0; |
| 222 | } |
| 223 | |
| 224 | static int dw_eth_recv(struct eth_device *dev) |
| 225 | { |
| 226 | struct dw_eth_dev *priv = dev->priv; |
| 227 | u32 desc_num = priv->rx_currdescnum; |
| 228 | struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; |
| 229 | |
| 230 | u32 status = desc_p->txrx_status; |
| 231 | int length = 0; |
| 232 | |
| 233 | /* Check if the owner is the CPU */ |
| 234 | if (!(status & DESC_RXSTS_OWNBYDMA)) { |
| 235 | |
| 236 | length = (status & DESC_RXSTS_FRMLENMSK) >> \ |
| 237 | DESC_RXSTS_FRMLENSHFT; |
| 238 | |
| 239 | NetReceive(desc_p->dmamac_addr, length); |
| 240 | |
| 241 | /* |
| 242 | * Make the current descriptor valid again and go to |
| 243 | * the next one |
| 244 | */ |
| 245 | desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA; |
| 246 | |
| 247 | /* Test the wrap-around condition. */ |
| 248 | if (++desc_num >= CONFIG_RX_DESCR_NUM) |
| 249 | desc_num = 0; |
| 250 | } |
| 251 | |
| 252 | priv->rx_currdescnum = desc_num; |
| 253 | |
| 254 | return length; |
| 255 | } |
| 256 | |
| 257 | static void dw_eth_halt(struct eth_device *dev) |
| 258 | { |
| 259 | struct dw_eth_dev *priv = dev->priv; |
| 260 | |
| 261 | mac_reset(dev); |
| 262 | priv->tx_currdescnum = priv->rx_currdescnum = 0; |
| 263 | } |
| 264 | |
| 265 | static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val) |
| 266 | { |
| 267 | struct dw_eth_dev *priv = dev->priv; |
| 268 | struct eth_mac_regs *mac_p = priv->mac_regs_p; |
| 269 | u32 miiaddr; |
| 270 | int timeout = CONFIG_MDIO_TIMEOUT; |
| 271 | |
| 272 | miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ |
| 273 | ((reg << MIIREGSHIFT) & MII_REGMSK); |
| 274 | |
| 275 | writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); |
| 276 | |
| 277 | do { |
| 278 | if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { |
| 279 | *val = readl(&mac_p->miidata); |
| 280 | return 0; |
| 281 | } |
| 282 | udelay(1000); |
| 283 | } while (timeout--); |
| 284 | |
| 285 | return -1; |
| 286 | } |
| 287 | |
| 288 | static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val) |
| 289 | { |
| 290 | struct dw_eth_dev *priv = dev->priv; |
| 291 | struct eth_mac_regs *mac_p = priv->mac_regs_p; |
| 292 | u32 miiaddr; |
| 293 | int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; |
| 294 | u16 value; |
| 295 | |
| 296 | writel(val, &mac_p->miidata); |
| 297 | miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ |
| 298 | ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE; |
| 299 | |
| 300 | writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); |
| 301 | |
| 302 | do { |
| 303 | if (!(readl(&mac_p->miiaddr) & MII_BUSY)) |
| 304 | ret = 0; |
| 305 | udelay(1000); |
| 306 | } while (timeout--); |
| 307 | |
| 308 | /* Needed as a fix for ST-Phy */ |
| 309 | eth_mdio_read(dev, addr, reg, &value); |
| 310 | |
| 311 | return ret; |
| 312 | } |
| 313 | |
| 314 | #if defined(CONFIG_DW_SEARCH_PHY) |
| 315 | static int find_phy(struct eth_device *dev) |
| 316 | { |
| 317 | int phy_addr = 0; |
| 318 | u16 ctrl, oldctrl; |
| 319 | |
| 320 | do { |
| 321 | eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); |
| 322 | oldctrl = ctrl & PHY_BMCR_AUTON; |
| 323 | |
| 324 | ctrl ^= PHY_BMCR_AUTON; |
| 325 | eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl); |
| 326 | eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); |
| 327 | ctrl &= PHY_BMCR_AUTON; |
| 328 | |
| 329 | if (ctrl == oldctrl) { |
| 330 | phy_addr++; |
| 331 | } else { |
| 332 | ctrl ^= PHY_BMCR_AUTON; |
| 333 | eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl); |
| 334 | |
| 335 | return phy_addr; |
| 336 | } |
| 337 | } while (phy_addr < 32); |
| 338 | |
| 339 | return -1; |
| 340 | } |
| 341 | #endif |
| 342 | |
| 343 | static int dw_reset_phy(struct eth_device *dev) |
| 344 | { |
| 345 | struct dw_eth_dev *priv = dev->priv; |
| 346 | u16 ctrl; |
| 347 | int timeout = CONFIG_PHYRESET_TIMEOUT; |
| 348 | u32 phy_addr = priv->address; |
| 349 | |
| 350 | eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET); |
| 351 | do { |
| 352 | eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); |
| 353 | if (!(ctrl & PHY_BMCR_RESET)) |
| 354 | break; |
| 355 | udelay(1000); |
| 356 | } while (timeout--); |
| 357 | |
| 358 | if (timeout < 0) |
| 359 | return -1; |
| 360 | |
| 361 | #ifdef CONFIG_PHY_RESET_DELAY |
| 362 | udelay(CONFIG_PHY_RESET_DELAY); |
| 363 | #endif |
| 364 | return 0; |
| 365 | } |
| 366 | |
| 367 | static int configure_phy(struct eth_device *dev) |
| 368 | { |
| 369 | struct dw_eth_dev *priv = dev->priv; |
| 370 | int phy_addr; |
| 371 | u16 bmcr, ctrl; |
| 372 | #if defined(CONFIG_DW_AUTONEG) |
| 373 | u16 bmsr; |
| 374 | u32 timeout; |
| 375 | u16 anlpar, btsr; |
| 376 | #endif |
| 377 | |
| 378 | #if defined(CONFIG_DW_SEARCH_PHY) |
| 379 | phy_addr = find_phy(dev); |
| 380 | if (phy_addr > 0) |
| 381 | priv->address = phy_addr; |
| 382 | else |
| 383 | return -1; |
| 384 | #endif |
| 385 | if (dw_reset_phy(dev) < 0) |
| 386 | return -1; |
| 387 | |
| 388 | #if defined(CONFIG_DW_AUTONEG) |
| 389 | bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \ |
| 390 | PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS; |
| 391 | #else |
| 392 | bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX; |
| 393 | |
| 394 | #if defined(CONFIG_DW_SPEED10M) |
| 395 | bmcr &= ~PHY_BMCR_100MB; |
| 396 | #endif |
| 397 | #if defined(CONFIG_DW_DUPLEXHALF) |
| 398 | bmcr &= ~PHY_BMCR_DPLX; |
| 399 | #endif |
| 400 | #endif |
| 401 | if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0) |
| 402 | return -1; |
| 403 | |
| 404 | /* Read the phy status register and populate priv structure */ |
| 405 | #if defined(CONFIG_DW_AUTONEG) |
| 406 | timeout = CONFIG_AUTONEG_TIMEOUT; |
| 407 | do { |
| 408 | eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr); |
| 409 | if (bmsr & PHY_BMSR_AUTN_COMP) |
| 410 | break; |
| 411 | udelay(1000); |
| 412 | } while (timeout--); |
| 413 | |
| 414 | eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar); |
| 415 | eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr); |
| 416 | |
| 417 | if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { |
| 418 | priv->speed = SPEED_1000M; |
| 419 | if (btsr & PHY_1000BTSR_1000FD) |
| 420 | priv->duplex = FULL_DUPLEX; |
| 421 | else |
| 422 | priv->duplex = HALF_DUPLEX; |
| 423 | } else { |
| 424 | if (anlpar & PHY_ANLPAR_100) |
| 425 | priv->speed = SPEED_100M; |
| 426 | else |
| 427 | priv->speed = SPEED_10M; |
| 428 | |
| 429 | if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) |
| 430 | priv->duplex = FULL_DUPLEX; |
| 431 | else |
| 432 | priv->duplex = HALF_DUPLEX; |
| 433 | } |
| 434 | #else |
| 435 | if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0) |
| 436 | return -1; |
| 437 | |
| 438 | if (ctrl & PHY_BMCR_DPLX) |
| 439 | priv->duplex = FULL_DUPLEX; |
| 440 | else |
| 441 | priv->duplex = HALF_DUPLEX; |
| 442 | |
| 443 | if (ctrl & PHY_BMCR_1000_MBPS) |
| 444 | priv->speed = SPEED_1000M; |
| 445 | else if (ctrl & PHY_BMCR_100_MBPS) |
| 446 | priv->speed = SPEED_100M; |
| 447 | else |
| 448 | priv->speed = SPEED_10M; |
| 449 | #endif |
| 450 | return 0; |
| 451 | } |
| 452 | |
| 453 | #if defined(CONFIG_MII) |
| 454 | static int dw_mii_read(char *devname, u8 addr, u8 reg, u16 *val) |
| 455 | { |
| 456 | struct eth_device *dev; |
| 457 | |
| 458 | dev = eth_get_dev_by_name(devname); |
| 459 | if (dev) |
| 460 | eth_mdio_read(dev, addr, reg, val); |
| 461 | |
| 462 | return 0; |
| 463 | } |
| 464 | |
| 465 | static int dw_mii_write(char *devname, u8 addr, u8 reg, u16 val) |
| 466 | { |
| 467 | struct eth_device *dev; |
| 468 | |
| 469 | dev = eth_get_dev_by_name(devname); |
| 470 | if (dev) |
| 471 | eth_mdio_write(dev, addr, reg, val); |
| 472 | |
| 473 | return 0; |
| 474 | } |
| 475 | #endif |
| 476 | |
| 477 | int designware_initialize(u32 id, ulong base_addr, u32 phy_addr) |
| 478 | { |
| 479 | struct eth_device *dev; |
| 480 | struct dw_eth_dev *priv; |
| 481 | |
| 482 | dev = (struct eth_device *) malloc(sizeof(struct eth_device)); |
| 483 | if (!dev) |
| 484 | return -ENOMEM; |
| 485 | |
| 486 | /* |
| 487 | * Since the priv structure contains the descriptors which need a strict |
| 488 | * buswidth alignment, memalign is used to allocate memory |
| 489 | */ |
| 490 | priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev)); |
| 491 | if (!priv) { |
| 492 | free(dev); |
| 493 | return -ENOMEM; |
| 494 | } |
| 495 | |
| 496 | memset(dev, 0, sizeof(struct eth_device)); |
| 497 | memset(priv, 0, sizeof(struct dw_eth_dev)); |
| 498 | |
| 499 | sprintf(dev->name, "mii%d", id); |
| 500 | dev->iobase = (int)base_addr; |
| 501 | dev->priv = priv; |
| 502 | |
| 503 | eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]); |
| 504 | |
| 505 | priv->dev = dev; |
| 506 | priv->mac_regs_p = (struct eth_mac_regs *)base_addr; |
| 507 | priv->dma_regs_p = (struct eth_dma_regs *)(base_addr + |
| 508 | DW_DMA_BASE_OFFSET); |
| 509 | priv->address = phy_addr; |
| 510 | |
| 511 | if (mac_reset(dev) < 0) |
| 512 | return -1; |
| 513 | |
| 514 | if (configure_phy(dev) < 0) { |
| 515 | printf("Phy could not be configured\n"); |
| 516 | return -1; |
| 517 | } |
| 518 | |
| 519 | dev->init = dw_eth_init; |
| 520 | dev->send = dw_eth_send; |
| 521 | dev->recv = dw_eth_recv; |
| 522 | dev->halt = dw_eth_halt; |
| 523 | dev->write_hwaddr = dw_write_hwaddr; |
| 524 | |
| 525 | eth_register(dev); |
| 526 | |
| 527 | #if defined(CONFIG_MII) |
| 528 | miiphy_register(dev->name, dw_mii_read, dw_mii_write); |
| 529 | #endif |
| 530 | return 1; |
| 531 | } |