blob: ebc6d9d2c988a41f20e63fa0068e53a1be9d6cd1 [file] [log] [blame]
Peng Fan34453732016-12-11 19:24:36 +08001/*
2 * Copyright 2016 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx6sll-clock.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include "imx6sll-pinfunc.h"
13#include "skeleton.dtsi"
14
15/ {
16 aliases {
17 gpio0 = &gpio1;
18 gpio1 = &gpio2;
19 gpio2 = &gpio3;
20 gpio3 = &gpio4;
21 gpio4 = &gpio5;
22 gpio5 = &gpio6;
23 i2c0 = &i2c1;
24 i2c1 = &i2c2;
25 i2c2 = &i2c3;
26 mmc0 = &usdhc1;
27 mmc1 = &usdhc2;
28 mmc2 = &usdhc3;
29 serial0 = &uart1;
30 serial1 = &uart2;
31 serial2 = &uart3;
32 serial3 = &uart4;
33 serial4 = &uart5;
34 spi0 = &ecspi1;
35 spi1 = &ecspi2;
36 spi3 = &ecspi3;
37 spi4 = &ecspi4;
38 usbphy0 = &usbphy1;
39 usbphy1 = &usbphy2;
40 };
41
42 cpus {
43 #address-cells = <1>;
44 #size-cells = <0>;
45
46 cpu0: cpu@0 {
47 compatible = "arm,cortex-a9";
48 device_type = "cpu";
49 reg = <0>;
50 next-level-cache = <&L2>;
51 operating-points = <
52 /* kHz uV */
53 996000 1225000
54 792000 1175000
55 396000 1075000
56 198000 975000
57 >;
58 fsl,soc-operating-points = <
59 /* ARM kHz SOC-PU uV */
60 996000 1225000
61 792000 1175000
62 396000 1175000
63 198000 1175000
64 >;
65 clock-latency = <61036>; /* two CLK32 periods */
66 fsl,low-power-run;
67 clocks = <&clks IMX6SLL_CLK_ARM>,
68 <&clks IMX6SLL_CLK_PLL2_PFD2>,
69 <&clks IMX6SLL_CLK_STEP>,
70 <&clks IMX6SLL_CLK_PLL1_SW>,
71 <&clks IMX6SLL_CLK_PLL1_SYS>,
72 <&clks IMX6SLL_CLK_PLL1>,
73 <&clks IMX6SLL_PLL1_BYPASS>,
74 <&clks IMX6SLL_PLL1_BYPASS_SRC>;
75 clock-names = "arm", "pll2_pfd2_396m", "step",
76 "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
77 "pll1_bypass_src";
78 };
79 };
80
81 intc: interrupt-controller@00a01000 {
82 compatible = "arm,cortex-a9-gic";
83 #interrupt-cells = <3>;
84 interrupt-controller;
85 reg = <0x00a01000 0x1000>,
86 <0x00a00100 0x100>;
87 interrupt-parent = <&intc>;
88 };
89
90 clocks {
91 #address-cells = <1>;
92 #size-cells = <0>;
93
94 ckil: clock@0 {
95 compatible = "fixed-clock";
96 reg = <0>;
97 #clock-cells = <0>;
98 clock-frequency = <32768>;
99 clock-output-names = "ckil";
100 };
101
102 osc: clock@1 {
103 compatible = "fixed-clock";
104 reg = <1>;
105 #clock-cells = <0>;
106 clock-frequency = <24000000>;
107 clock-output-names = "osc";
108 };
109
110 ipp_di0: clock@2 {
111 compatible = "fixed-clock";
112 reg = <2>;
113 #clock-cells = <0>;
114 clock-frequency = <0>;
115 clock-output-names = "ipp_di0";
116 };
117
118 ipp_di1: clock@3 {
119 compatible = "fixed-clock";
120 reg = <3>;
121 #clock-cells = <0>;
122 clock-frequency = <0>;
123 clock-output-names = "ipp_di1";
124 };
125 };
126
127 soc {
128 #address-cells = <1>;
129 #size-cells = <1>;
130 compatible = "simple-bus";
131 interrupt-parent = <&gpc>;
132 ranges;
133
134 busfreq {
135 compatible = "fsl,imx_busfreq";
136 clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
137 <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
138 <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
139 <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
140 <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
141 <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
142 <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
143 <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
144 <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
145 <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
146 <&clks IMX6SLL_CLK_PLL1>;
147 clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
148 "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
149 "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
150 "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
151 fsl,max_ddr_freq = <400000000>;
152 };
153
154 ocrams: sram@00900000 {
155 compatible = "fsl,lpm-sram";
156 reg = <0x00900000 0x4000>;
157 };
158
159 ocrams_ddr: sram@00904000 {
160 compatible = "fsl,ddr-lpm-sram";
161 reg = <0x00904000 0x1000>;
162 };
163
164 ocram: sram@00905000 {
165 compatible = "mmio-sram";
166 reg = <0x00905000 0x1B000>;
167 };
168
169 L2: l2-cache@00a02000 {
170 compatible = "arm,pl310-cache";
171 reg = <0x00a02000 0x1000>;
172 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
173 cache-unified;
174 cache-level = <2>;
175 arm,tag-latency = <4 2 3>;
176 arm,data-latency = <4 2 3>;
177 };
178
Oleksandr Suvorovcdb18042021-09-23 23:14:37 +0300179 aips1: bus@02000000 {
Peng Fan34453732016-12-11 19:24:36 +0800180 compatible = "fsl,aips-bus", "simple-bus";
181 #address-cells = <1>;
182 #size-cells = <1>;
183 reg = <0x02000000 0x100000>;
184 ranges;
185
186 spba: spba-bus@02000000 {
187 compatible = "fsl,spba-bus", "simple-bus";
188 #address-cells = <1>;
189 #size-cells = <1>;
190 reg = <0x02000000 0x40000>;
191 ranges;
192
193 spdif: spdif@02004000 {
194 compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
195 reg = <0x02004000 0x4000>;
196 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
197 dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
198 dma-names = "rx", "tx";
199 clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
200 <&clks IMX6SLL_CLK_OSC>,
201 <&clks IMX6SLL_CLK_SPDIF>,
202 <&clks IMX6SLL_CLK_DUMMY>,
203 <&clks IMX6SLL_CLK_DUMMY>,
204 <&clks IMX6SLL_CLK_DUMMY>,
205 <&clks IMX6SLL_CLK_IPG>,
206 <&clks IMX6SLL_CLK_DUMMY>,
207 <&clks IMX6SLL_CLK_DUMMY>,
208 <&clks IMX6SLL_CLK_SPBA>;
209 clock-names = "core", "rxtx0",
210 "rxtx1", "rxtx2",
211 "rxtx3", "rxtx4",
212 "rxtx5", "rxtx6",
213 "rxtx7", "dma";
214 status = "disabled";
215 };
216
217 ecspi1: ecspi@02008000 {
218 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
219 reg = <0x02008000 0x4000>;
220 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
221 dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
222 dma-names = "rx", "tx";
223 clocks = <&clks IMX6SLL_CLK_ECSPI1>,
224 <&clks IMX6SLL_CLK_ECSPI1>;
225 clock-names = "ipg", "per";
226 status = "disabled";
227 };
228
229 ecspi2: ecspi@0200c000 {
230 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
231 reg = <0x0200c000 0x4000>;
232 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
233 dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
234 dma-names = "rx", "tx";
235 clocks = <&clks IMX6SLL_CLK_ECSPI2>,
236 <&clks IMX6SLL_CLK_ECSPI2>;
237 clock-names = "ipg", "per";
238 status = "disabled";
239 };
240
241 ecspi3: ecspi@02010000 {
242 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
243 reg = <0x02010000 0x4000>;
244 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
245 dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
246 dma-names = "rx", "tx";
247 clocks = <&clks IMX6SLL_CLK_ECSPI3>,
248 <&clks IMX6SLL_CLK_ECSPI3>;
249 clock-names = "ipg", "per";
250 status = "disabled";
251 };
252
253 ecspi4: ecspi@02014000 {
254 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
255 reg = <0x02014000 0x4000>;
256 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
257 dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
258 dma-names = "rx", "tx";
259 clocks = <&clks IMX6SLL_CLK_ECSPI4>,
260 <&clks IMX6SLL_CLK_ECSPI4>;
261 clock-names = "ipg", "per";
262 status = "disabled";
263 };
264
265 uart4: serial@02018000 {
266 compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
267 reg = <0x02018000 0x4000>;
268 interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
269 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
270 dma-names = "rx", "tx";
271 clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
272 <&clks IMX6SLL_CLK_UART4_SERIAL>;
273 clock-names = "ipg", "per";
274 status = "disabled";
275 };
276
277 uart1: serial@02020000 {
278 compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
279 reg = <0x02020000 0x4000>;
280 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
281 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
282 dma-names = "rx", "tx";
283 clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
284 <&clks IMX6SLL_CLK_UART1_SERIAL>;
285 clock-names = "ipg", "per";
286 status = "disabled";
287 };
288
289 uart2: serial@02024000 {
290 compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
291 reg = <0x02024000 0x4000>;
292 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
293 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
294 dma-names = "rx", "tx";
295 clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
296 <&clks IMX6SLL_CLK_UART2_SERIAL>;
297 clock-names = "ipg", "per";
298 status = "disabled";
299 };
300
301 ssi1: ssi@02028000 {
302 compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
303 reg = <0x02028000 0x4000>;
304 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
305 dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
306 dma-names = "rx", "tx";
307 fsl,fifo-depth = <15>;
308 clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
309 <&clks IMX6SLL_CLK_SSI1>;
310 clock-names = "ipg", "baud";
311 status = "disabled";
312 };
313
314 ssi2: ssi2@0202c000 {
315 compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
316 reg = <0x0202c000 0x4000>;
317 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
318 dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
319 dma-names = "rx", "tx";
320 fsl,fifo-depth = <15>;
321 clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
322 <&clks IMX6SLL_CLK_SSI2>;
323 clock-names = "ipg", "baud";
324 status = "disabled";
325 };
326
327 ssi3: ssi@02030000 {
328 compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
329 reg = <0x02030000 0x4000>;
330 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
331 dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
332 dma-names = "rx", "tx";
333 fsl,fifo-depth = <15>;
334 clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
335 <&clks IMX6SLL_CLK_SSI3>;
336 clock-names = "ipg", "baud";
337 status = "disabled";
338 };
339
340 uart3: serial@02034000 {
341 compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
342 reg = <0x02034000 0x4000>;
343 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
344 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
345 dma-name = "rx", "tx";
346 clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
347 <&clks IMX6SLL_CLK_UART3_SERIAL>;
348 clock-names = "ipg", "per";
349 status = "disabled";
350 };
351 };
352
353 pwm1: pwm@02080000 {
354 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
355 reg = <0x02080000 0x4000>;
356 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
357 clocks = <&clks IMX6SLL_CLK_PWM1>,
358 <&clks IMX6SLL_CLK_PWM1>;
359 clock-names = "ipg", "per";
360 #pwm-cells = <2>;
361 };
362
363 pwm2: pwm@02084000 {
364 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
365 reg = <0x02084000 0x4000>;
366 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
367 clocks = <&clks IMX6SLL_CLK_PWM2>,
368 <&clks IMX6SLL_CLK_PWM2>;
369 clock-names = "ipg", "per";
370 #pwm-cells = <2>;
371 };
372
373 pwm3: pwm@02088000 {
374 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
375 reg = <0x02088000 0x4000>;
376 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
377 clocks = <&clks IMX6SLL_CLK_PWM3>,
378 <&clks IMX6SLL_CLK_PWM3>;
379 clock-names = "ipg", "per";
380 #pwm-cells = <2>;
381 };
382
383 pwm4: pwm@0208c000 {
384 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
385 reg = <0x0208c000 0x4000>;
386 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
387 clocks = <&clks IMX6SLL_CLK_PWM4>,
388 <&clks IMX6SLL_CLK_PWM4>;
389 clock-names = "ipg", "per";
390 #pwm-cells = <2>;
391 };
392
393 gpt1: gpt@02098000 {
394 compatible = "fsl,imx6sll-gpt";
395 reg = <0x02098000 0x4000>;
396 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
397 clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
398 <&clks IMX6SLL_CLK_GPT_SERIAL>;
399 clock-names = "ipg", "per";
400 };
401
402 gpio1: gpio@0209c000 {
403 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
404 reg = <0x0209c000 0x4000>;
405 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
406 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
407 gpio-controller;
408 #gpio-cells = <2>;
409 interrupt-controller;
410 #interrupt-cells = <2>;
411 };
412
413 gpio2: gpio@020a0000 {
414 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
415 reg = <0x020a0000 0x4000>;
416 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
417 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
418 gpio-controller;
419 #gpio-cells = <2>;
420 interrupt-controller;
421 #interrupt-cells = <2>;
422 };
423
424 gpio3: gpio@020a4000 {
425 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
426 reg = <0x020a4000 0x4000>;
427 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
428 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
429 gpio-controller;
430 #gpio-cells = <2>;
431 interrupt-controller;
432 #interrupt-cells = <2>;
433 };
434
435 gpio4: gpio@020a8000 {
436 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
437 reg = <0x020a8000 0x4000>;
438 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
439 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
440 gpio-controller;
441 #gpio-cells = <2>;
442 interrupt-controller;
443 #interrupt-cells = <2>;
444 };
445
446 gpio5: gpio@020ac000 {
447 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
448 reg = <0x020ac000 0x4000>;
449 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
450 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
451 gpio-controller;
452 #gpio-cells = <2>;
453 interrupt-controller;
454 #interrupt-cells = <2>;
455 };
456
457 gpio6: gpio@020b0000 {
458 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
459 reg = <0x020b0000 0x4000>;
460 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
461 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
462 gpio-controller;
463 #gpio-cells = <2>;
464 interrupt-controller;
465 #interrupt-cells = <2>;
466 };
467
468 kpp: kpp@020b8000 {
469 compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
470 reg = <0x020b8000 0x4000>;
471 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
472 clocks = <&clks IMX6SLL_CLK_KPP>;
473 status = "disabled";
474 };
475
476 wdog1: wdog@020bc000 {
477 compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
478 reg = <0x020bc000 0x4000>;
479 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
480 clocks = <&clks IMX6SLL_CLK_WDOG1>;
481 };
482
483 wdog2: wdog@020c0000 {
484 compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
485 reg = <0x020c0000 0x4000>;
486 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
487 clocks = <&clks IMX6SLL_CLK_WDOG2>;
488 status = "disabled";
489 };
490
491 clks: ccm@020c4000 {
492 compatible = "fsl,imx6sll-ccm";
493 reg = <0x020c4000 0x4000>;
494 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
495 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
496 #clock-cells = <1>;
497 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
498 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
499 };
500
501 anatop: anatop@020c8000 {
502 compatible = "fsl,imx6sll-anatop",
503 "fsl,imx6q-anatop",
504 "syscon", "simple-bus";
505 reg = <0x020c8000 0x4000>;
506 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
507 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
508 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
509
510 reg_3p0: regulator-3p0@120 {
511 compatible = "fsl,anatop-regulator";
512 regulator-name = "vdd3p0";
513 regulator-min-microvolt = <2625000>;
514 regulator-max-microvolt = <3400000>;
515 anatop-reg-offset = <0x120>;
516 anatop-vol-bit-shift = <8>;
517 anatop-vol-bit-width = <5>;
518 anatop-min-bit-val = <0>;
519 anatop-min-voltage = <2625000>;
520 anatop-max-voltage = <3400000>;
521 anatop-enable-bit = <0>;
522 };
523 };
524
525 tempmon: tempmon {
526 compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
527 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
528 fsl,tempmon = <&anatop>;
529 fsl,tempmon-data = <&ocotp>;
530 clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
531 status = "disabled";
532 };
533
534 usbphy1: usbphy@020c9000 {
535 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
536 "fsl,imx23-usbphy";
537 reg = <0x020c9000 0x1000>;
538 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
539 clocks = <&clks IMX6SLL_CLK_USBPHY1>;
540 phy-3p0-supply = <&reg_3p0>;
541 fsl,anatop = <&anatop>;
542 };
543
544 usbphy2: usbphy@020ca000 {
545 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
546 "fsl,imx23-usbphy";
547 reg = <0x020ca000 0x1000>;
548 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
549 clocks = <&clks IMX6SLL_CLK_USBPHY2>;
550 phy-reg_3p0-supply = <&reg_3p0>;
551 fsl,anatop = <&anatop>;
552 };
553
554 snvs: snvs@020cc000 {
555 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
556 reg = <0x020cc000 0x4000>;
557
558 snvs_rtc: snvs-rtc-lp {
559 compatible = "fsl,sec-v4.0-mon-rtc-lp";
560 regmap = <&snvs>;
561 offset = <0x34>;
562 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
563 };
564
565 snvs_poweroff: snvs-poweroff {
566 compatible = "syscon-poweroff";
567 regmap = <&snvs>;
568 offset = <0x38>;
569 mask = <0x61>;
570 };
571
572 snvs_pwrkey: snvs-powerkey {
573 compatible = "fsl,sec-v4.0-pwrkey";
574 regmap = <&snvs>;
575 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
576 linux,keycode = <KEY_POWER>;
577 wakeup;
578 };
579 };
580
581 epit1: epit@020d0000 {
582 reg = <0x020d0000 0x4000>;
583 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
584 };
585
586 epit2: epit@020d4000 {
587 reg = <0x020d4000 0x4000>;
588 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
589 };
590
591 src: src@020d8000 {
592 compatible = "fsl,imx6sll-src", "fsl,imx51-src";
593 reg = <0x020d8000 0x4000>;
594 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
595 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
596 #reset-cells = <1>;
597 };
598
599 gpc: gpc@020dc000 {
600 compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
601 reg = <0x020dc000 0x4000>;
602 interrupt-controller;
603 #interrupt-cells = <3>;
604 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
605 interrupt-parent = <&intc>;
606 fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
607 };
608
609 iomuxc: iomuxc@020e0000 {
610 compatible = "fsl,imx6sll-iomuxc";
611 reg = <0x020e0000 0x4000>;
612 };
613
614 gpr: iomuxc-gpr@020e4000 {
615 compatible = "fsl,imx6sll-iomuxc-gpr",
616 "fsl,imx6q-iomuxc-gpr", "syscon";
617 reg = <0x020e4000 0x4000>;
618 };
619
620 csi: csi@020e8000 {
621 compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
622 reg = <0x020e8000 0x4000>;
623 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
624 clocks = <&clks IMX6SLL_CLK_DUMMY>,
625 <&clks IMX6SLL_CLK_CSI>,
626 <&clks IMX6SLL_CLK_DUMMY>;
627 clock-names = "disp-axi", "csi_mclk", "disp_dcic";
628 status = "disabled";
629 };
630
631 sdma: sdma@020ec000 {
632 compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
633 reg = <0x020ec000 0x4000>;
634 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
635 clocks = <&clks IMX6SLL_CLK_SDMA>,
636 <&clks IMX6SLL_CLK_SDMA>;
637 clock-names = "ipg", "ahb";
638 #dma-cells = <3>;
639 iram = <&ocram>;
640 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
641 };
642
643 pxp: pxp@020f0000 {
644 compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
645 reg = <0x020f0000 0x4000>;
646 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
647 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
648 clocks = <&clks IMX6SLL_CLK_DUMMY>,
649 <&clks IMX6SLL_CLK_PXP>;
650 clock-names = "pxp_ipg", "pxp_axi";
651 status = "disabled";
652 };
653
654 epdc: epdc@020f4000 {
655 compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
656 reg = <0x020f4000 0x4000>;
657 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
658 clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
659 clock-names = "epdc_axi", "epdc_pix";
660 status = "disabled";
661 };
662
663 lcdif: lcdif@020f8000 {
664 compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
665 reg = <0x020f8000 0x4000>;
666 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
667 clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
668 <&clks IMX6SLL_CLK_LCDIF_APB>,
669 <&clks IMX6SLL_CLK_DUMMY>;
670 clock-names = "pix", "axi", "disp_axi";
671 status = "disabled";
672 };
673
674 dcp: dcp@020fc000 {
675 compatible = "fsl,imx6sl-dcp";
676 reg = <0x020fc000 0x4000>;
677 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
678 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
679 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
680 clocks = <&clks IMX6SLL_CLK_DCP>;
681 clock-names = "dcp";
682 };
683 };
684
Oleksandr Suvorovcdb18042021-09-23 23:14:37 +0300685 aips2: bus@02100000 {
Peng Fan34453732016-12-11 19:24:36 +0800686 compatible = "fsl,aips-bus", "simple-bus";
687 #address-cells = <1>;
688 #size-cells = <1>;
689 reg = <0x02100000 0x100000>;
690 ranges;
691
692 usbotg1: usb@02184000 {
693 compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
694 "fsl,imx27-usb";
695 reg = <0x02184000 0x200>;
696 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
697 clocks = <&clks IMX6SLL_CLK_USBOH3>;
698 fsl,usbphy = <&usbphy1>;
699 fsl,usbmisc = <&usbmisc 0>;
700 fsl,anatop = <&anatop>;
701 ahb-burst-config = <0x0>;
702 tx-burst-size-dword = <0x10>;
703 rx-burst-size-dword = <0x10>;
704 status = "disabled";
705 };
706
707 usbotg2: usb@02184200 {
708 compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
709 "fsl,imx27-usb";
710 reg = <0x02184200 0x200>;
711 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
712 clocks = <&clks IMX6SLL_CLK_USBOH3>;
713 fsl,usbphy = <&usbphy2>;
714 fsl,usbmisc = <&usbmisc 1>;
715 ahb-burst-config = <0x0>;
716 tx-burst-size-dword = <0x10>;
717 rx-burst-size-dword = <0x10>;
718 status = "disabled";
719 };
720
721 usbmisc: usbmisc@02184800 {
722 #index-cells = <1>;
723 compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
724 "fsl,imx6q-usbmisc";
725 reg = <0x02184800 0x200>;
726 };
727
728 usdhc1: usdhc@02190000 {
729 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
730 reg = <0x02190000 0x4000>;
731 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
732 clocks = <&clks IMX6SLL_CLK_USDHC1>,
733 <&clks IMX6SLL_CLK_USDHC1>,
734 <&clks IMX6SLL_CLK_USDHC1>;
735 clock-names = "ipg", "ahb", "per";
736 bus-width = <4>;
737 fsl,tuning-step = <2>;
738 fsl,tuning-start-tap = <20>;
739 status = "disabled";
740 };
741
742 usdhc2: usdhc@02194000 {
743 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
744 reg = <0x02194000 0x4000>;
745 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
746 clocks = <&clks IMX6SLL_CLK_USDHC2>,
747 <&clks IMX6SLL_CLK_USDHC2>,
748 <&clks IMX6SLL_CLK_USDHC2>;
749 clock-names = "ipg", "ahb", "per";
750 bus-width = <4>;
751 fsl,tuning-step = <2>;
752 fsl,tuning-start-tap = <20>;
753 status = "disabled";
754 };
755
756 usdhc3: usdhc@02198000 {
757 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
758 reg = <0x02198000 0x4000>;
759 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
760 clocks = <&clks IMX6SLL_CLK_USDHC3>,
761 <&clks IMX6SLL_CLK_USDHC3>,
762 <&clks IMX6SLL_CLK_USDHC3>;
763 clock-names = "ipg", "ahb", "per";
764 bus-width = <4>;
765 fsl,tuning-step = <2>;
766 fsl,tuning-start-tap = <20>;
767 status = "disabled";
768 };
769
770 i2c1: i2c@021a0000 {
771 #address-cells = <1>;
772 #size-cells = <0>;
773 compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
774 reg = <0x021a0000 0x4000>;
775 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
776 clocks = <&clks IMX6SLL_CLK_I2C1>;
777 status = "disabled";
778 };
779
780 i2c2: i2c@021a4000 {
781 #address-cells = <1>;
782 #size-cells = <0>;
783 compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
784 reg = <0x021a4000 0x4000>;
785 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
786 clocks = <&clks IMX6SLL_CLK_I2C2>;
787 status = "disabled";
788 };
789
790 i2c3: i2c@021a8000 {
791 #address-cells = <1>;
792 #size-cells = <0>;
793 compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
794 reg = <0x021a8000 0x4000>;
795 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
796 clocks = <&clks IMX6SLL_CLK_I2C3>;
797 status = "disabled";
798 };
799
800 romcp@021ac000 {
801 compatible = "fsl,imx6sll-romcp", "syscon";
802 reg = <0x021ac000 0x4000>;
803 };
804
805 mmdc: mmdc@021b0000 {
806 compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
807 reg = <0x021b0000 0x4000>;
808 };
809
810 rngb: rngb@021b4000 {
811 compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
812 reg = <0x021b4000 0x4000>;
813 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
814 clocks = <&clks IMX6SLL_CLK_DUMMY>;
815 };
816
817 ocotp: ocotp-ctrl@021bc000 {
818 compatible = "fsl,imx6sll-ocotp", "syscon";
819 reg = <0x021bc000 0x4000>;
820 clocks = <&clks IMX6SLL_CLK_OCOTP>;
821 };
822
823 csu: csu@021c0000 {
824 compatible = "fsl,imx6sll-csu";
825 reg = <0x021c0000 0x4000>;
826 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
827 status = "disabled";
828 };
829
830 snvs_gpr: snvs-gpr@0x021c4000 {
831 compatible = "fsl, imx6sll-snvs-gpr";
832 reg = <0x021c4000 0x10000>;
833 };
834
835 iomuxc_snvs: iomuxc-snvs@021c8000 {
836 compatible = "fsl,imx6sll-iomuxc-snvs";
837 reg = <0x021c80000 0x10000>;
838 };
839
840 audmux: audmux@021d8000 {
841 compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
842 reg = <0x021d8000 0x4000>;
843 status = "disabled";
844 };
845
846 uart5: serial@021f4000 {
847 compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
848 reg = <0x021f4000 0x4000>;
849 interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
850 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
851 dma-names = "rx", "tx";
852 clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
853 <&clks IMX6SLL_CLK_UART5_SERIAL>;
854 clock-names = "ipg", "per";
855 status = "disabled";
856 };
857 };
858 };
859};