blob: c23a57ee7a2b3dab41a257e5ccf1d26e468f49d0 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Lukasz Majewskia3eec242017-10-31 17:58:05 +01002/*
3 * Copyright (C) 2017
4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
Lukasz Majewskia3eec242017-10-31 17:58:05 +01005 */
6
7#ifndef __CONFIG_H
8#define __CONFIG_H
9
10#include "mx6_common.h"
11
12/* Falcon Mode */
Lukasz Majewskia3eec242017-10-31 17:58:05 +010013
14/* Falcon Mode - MMC support */
Lukasz Majewskia3eec242017-10-31 17:58:05 +010015
16/*
17 * display5 SPI-NOR memory layout
18 *
19 * The definition can be found in Kconfig's
20 * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
21 *
22 * 0x000000 - 0x020000 : SPI.SPL (128KiB)
23 * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
24 * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
25 * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
Lukasz Majewskic04b41b2020-05-13 17:45:15 +020026 * 0x140000 - 0x740000 : SPI.swupdate-kernel-FIT (6MiB)
27 * 0x740000 - 0x1B40000 : SPI.swupdate-initramfs (20MiB)
28 * 0x1B40000 - 0x1F00000 : SPI.reserved (3840KiB)
29 * 0x1F00000 - 0x2000000 : SPI.factory (1MiB)
Lukasz Majewskia3eec242017-10-31 17:58:05 +010030 */
31
Lukasz Majewskia3eec242017-10-31 17:58:05 +010032/* Below values are "dummy" - only to avoid build break */
33#define CONFIG_SYS_SPI_KERNEL_OFFS 0x150000
34#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
35#define CONFIG_SYS_SPI_ARGS_SIZE 0x10000
36
37#include "imx6_spl.h"
Lukasz Majewskia3eec242017-10-31 17:58:05 +010038
Lukasz Majewskia3eec242017-10-31 17:58:05 +010039#define CONFIG_MXC_UART_BASE UART5_BASE
40
Lukasz Majewskia3eec242017-10-31 17:58:05 +010041/* I2C Configs */
Lukasz Majewskia3eec242017-10-31 17:58:05 +010042#define CONFIG_I2C_MULTI_BUS
Lukasz Majewskia3eec242017-10-31 17:58:05 +010043
44/* MMC Configs */
Lukasz Majewskia3eec242017-10-31 17:58:05 +010045#define CONFIG_SYS_FSL_ESDHC_ADDR 0
46#define CONFIG_SYS_FSL_USDHC_NUM 2
Lukasz Majewskia3eec242017-10-31 17:58:05 +010047
Lukasz Majewskia3eec242017-10-31 17:58:05 +010048#define PARTS_DEFAULT \
49 /* Linux partitions */ \
50 "partitions=" \
51 "uuid_disk=${uuid_gpt_disk};" \
52 "name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
53 "name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
54 "name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
Lukasz Majewski9fea1ca2018-05-11 16:51:16 +020055 "name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +010056 "name=data,size=-,uuid=${uuid_gpt_data}\0"
57
Lukasz Majewskia3eec242017-10-31 17:58:05 +010058#define SWUPDATE_RECOVERY_PROCEDURE \
59 "echo '#######################';" \
60 "echo '# RECOVERY SWUupdate #';" \
61 "echo '#######################';" \
Lukasz Majewski0f055122018-05-11 16:51:18 +020062 "echo '#######################';" \
63 "echo '# GPT verify #';" \
64 "if gpt verify mmc ${mmcdev} ${partitions}; then " \
65 "echo '# OK ! #';" \
66 "else " \
67 "echo '# FAILED ! #';" \
68 "echo '# GPT RESTORATION #';" \
69 "gpt write mmc ${mmcdev} ${partitions};" \
70 "fi;" \
71 "echo '#######################';" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +010072 "setenv loadaddr_swu_initramfs 0x14000000;" \
73 "setenv bootargs console=${console} " \
74 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
75 ":${hostname}::off root=/dev/ram rw;" \
76 "sf probe;" \
77 "sf read ${loadaddr} swu-kernel;" \
78 "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
Lukasz Majewski1bcbf482018-05-11 16:51:04 +020079 "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
Lukasz Majewskia3eec242017-10-31 17:58:05 +010080
Lukasz Majewskia3eec242017-10-31 17:58:05 +010081#define SETUP_BOOTARGS \
82 "run set_rootfs_part;" \
83 "setenv bootargs ${bootargs} console=${console} " \
84 "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
85 "rootwait rootfstype=ext4 rw; " \
86 "run set_kernel_part;" \
87 "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
Lukasz Majewskif008e262018-08-18 22:22:07 +020088 "mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
Lukasz Majewskia3eec242017-10-31 17:58:05 +010089 "setenv fdt_conf imx6q-${board}-${display}.dtb; "
90
91/* All the numbers are in LBAs */
92#define __TFTP_UPDATE_KERNEL \
93 "tftp_mmc_fitImg=" \
94 "if test ! -n ${kernel_part}; then " \
95 "setenv kernel_part ${kernel_part_active};" \
96 "fi;" \
97 "if tftp ${loadaddr} ${kernel_file}; then " \
98 "setexpr fw_sz ${filesize} / 0x200; " \
99 "setexpr fw_sz ${fw_sz} + 1; " \
100 "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
101 "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
102 "; fi\0" \
103
104#define TFTP_UPDATE_KERNEL \
105 "setenv kernel_part ${kernel_part_active};" \
106 "run tftp_mmc_fitImg;" \
107 "setenv kernel_part ${kernel_part_backup};" \
108 "run tftp_mmc_fitImg;" \
109
110#define __TFTP_UPDATE_ROOTFS \
111 "tftp_mmc_rootfs=" \
112 "if test ! -n ${rootfs_part}; then " \
113 "setenv rootfs_part ${rootfs_part_active};" \
114 "fi;" \
115 "if tftp ${loadaddr} ${rootfs_file}; then " \
116 "setexpr fw_sz ${filesize} / 0x200; " \
117 "setexpr fw_sz ${fw_sz} + 1; " \
118 "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
119 "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
120 "; fi\0" \
121
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100122#define TFTP_UPDATE_ROOTFS \
123 "setenv rootfs_part ${rootfs_part_active};" \
124 "run tftp_mmc_rootfs;" \
Lukasz Majewski18ccca52018-05-11 16:51:11 +0200125 "run tftp_mmc_rootfs_bkp;" \
126
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100127
128#define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
129 "tftp_sf_fitImg_SWU=" \
130 "if tftp ${loadaddr} ${kernel_file}; then " \
131 "sf probe;" \
132 "sf erase swu-kernel +${filesize};" \
133 "sf write ${loadaddr} swu-kernel ${filesize};" \
134 "; fi\0" \
135
136#define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
Lukasz Majewskib5f45432018-05-11 16:51:12 +0200137 "swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100138 "tftp_sf_initramfs_SWU=" \
139 "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
140 "sf probe;" \
141 "sf erase swu-initramfs +${filesize};" \
142 "sf write ${loadaddr} swu-initramfs ${filesize};" \
143 "; fi\0" \
144
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100145#define TFTP_UPDATE_BOOTLOADER \
146 "ubootfile=u-boot.img\0" \
147 "ubootfileSPL=SPL\0" \
148 "tftp_sf_uboot=" \
149 "if tftp ${loadaddr} ${ubootfile}; then " \
150 "sf probe;" \
151 "sf erase u-boot +${filesize};" \
152 "sf write ${loadaddr} u-boot ${filesize}" \
153 "; fi\0" \
154 "tftp_sf_SPL=" \
155 "if tftp ${loadaddr} ${ubootfileSPL}; then " \
156 "sf probe;" \
157 "setexpr uboot_SPL_size ${filesize} + 0x400;" \
158 "sf erase 0x0 +${uboot_SPL_size};" \
159 "sf write ${loadaddr} 0x400 ${filesize};" \
160 "fi\0" \
161
Lukasz Majewski2f4372a2018-05-11 16:51:02 +0200162#define TFTP_UPDATE_SPINOR \
163 "spinorfile=core-image-lwn-display5.spinor\0" \
164 "spinorsize=0x2000000\0" \
165 "tftp_sf_img=" \
166 "if tftp ${loadaddr} ${spinorfile}; then " \
167 "sf probe;" \
168 "sf erase 0x0 ${spinorsize};" \
169 "sf write ${loadaddr} 0x0 ${filesize};" \
170 "fi\0" \
171
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100172#define CONFIG_EXTRA_ENV_SETTINGS \
173 PARTS_DEFAULT \
Lukasz Majewski27aede22018-05-11 16:51:08 +0200174 "gpio_recovery=93\0" \
175 "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100176 "display=tianma-tm070-800x480\0" \
177 "board=display5\0" \
178 "mmcdev=0\0" \
179 "altbootcmd=run recovery\0" \
180 "bootdelay=1\0" \
181 "baudrate=115200\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100182 "ethact=FEC\0" \
183 "netdev=eth0\0" \
184 "boot_os=y\0" \
185 "hostname=display5\0" \
186 "loadaddr=0x12000000\0" \
187 "fdtaddr=0x12800000\0" \
Lukasz Majewski5d925402018-05-11 16:51:15 +0200188 "console=ttymxc4,115200 quiet cma=256M\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100189 "fdtfile=imx6q-display5.dtb\0" \
190 "fdt_high=0xffffffff\0" \
191 "initrd_high=0xffffffff\0" \
192 "kernel_file=fitImage\0" \
Lukasz Majewskif008e262018-08-18 22:22:07 +0200193 "fitImg_fw_sz=0x2200\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100194 "up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
195 "download_kernel=" \
196 "tftpboot ${loadaddr} ${kernel_file};\0" \
Lukasz Majewski13e012f2018-05-11 16:50:59 +0200197 "factory_nfs=" \
Lukasz Majewski4864ba72018-05-11 16:51:00 +0200198 "setenv ipaddr 192.168.1.102;" \
199 "setenv gatewayip 192.168.1.1;" \
200 "setenv netmask 255.255.255.0;" \
201 "setenv serverip 192.168.1.2;" \
Lukasz Majewski13e012f2018-05-11 16:50:59 +0200202 "echo BOOT: FACTORY (LEG);" \
203 "run boot_nfs\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100204 "boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
205 "recovery=" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100206 "echo BOOT: RECOVERY: SWU;" \
Lukasz Majewskib78e9c42018-05-11 16:51:05 +0200207 "run boot_swu_recovery\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100208 "boot_tftp=" \
209 "if run download_kernel; then " \
210 "setenv bootargs console=${console} " \
211 "root=/dev/mmcblk0p2 rootwait;" \
Lukasz Majewski1bcbf482018-05-11 16:51:04 +0200212 "bootm ${loadaddr} - ${fdtaddr};reset;" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100213 "fi\0" \
214 "addip=setenv bootargs ${bootargs} " \
215 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
216 "${hostname}:eth0:on" \
217 "\0" \
218 "nfsargs=setenv bootargs " \
219 "root=/dev/nfs rw " \
220 "nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
221 "\0" \
222 "rootpath=/srv/tftp/DISP5/rootfs\0" \
223 "boot_nfs=" \
224 "if run download_kernel; then " \
225 "run nfsargs;" \
226 "run addip;" \
227 "setenv bootargs ${bootargs} console=${console};" \
228 "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
Lukasz Majewski1bcbf482018-05-11 16:51:04 +0200229 "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100230 "fi\0" \
231 "falcon_setup=" \
232 "if mmc dev ${mmcdev}; then " \
233 SETUP_BOOTARGS \
234 "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
235 "setexpr fw_sz ${fdtargslen} / 0x200; " \
236 "setexpr fw_sz ${fw_sz} + 1; " \
237 "mmc write ${fdtargsaddr} " \
238 __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
239 "fi\0" \
240 "boot_mmc=" \
241 "if mmc dev ${mmcdev}; then " \
242 SETUP_BOOTARGS \
Lukasz Majewski1bcbf482018-05-11 16:51:04 +0200243 "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100244 "fi\0" \
245 "set_kernel_part=" \
246 "if test ${BOOT_FROM} = ACTIVE; then " \
247 "setenv kernel_part ${kernel_part_active};" \
248 "echo BOOT: ACTIVE;" \
249 "else if test ${BOOT_FROM} = BACKUP; then " \
250 "setenv kernel_part ${kernel_part_backup};" \
251 "echo BOOT: BACKUP;" \
252 "else " \
253 "run recovery;" \
254 "fi;fi\0" \
255 "set_rootfs_part=" \
256 "if test ${BOOT_FROM} = ACTIVE; then " \
257 "setenv rootfs_part ${rootfs_part_active};" \
258 "else if test ${BOOT_FROM} = BACKUP; then " \
259 "setenv rootfs_part ${rootfs_part_backup};" \
260 "else " \
261 "run recovery;" \
262 "fi;fi\0" \
263 "BOOT_FROM=ACTIVE\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100264 TFTP_UPDATE_BOOTLOADER \
Lukasz Majewski2f4372a2018-05-11 16:51:02 +0200265 TFTP_UPDATE_SPINOR \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100266 "kernel_part_active=1\0" \
267 "kernel_part_backup=3\0" \
268 __TFTP_UPDATE_KERNEL \
269 "rootfs_part_active=2\0" \
270 "rootfs_part_backup=4\0" \
271 "rootfs_file=core-image-lwn-display5.ext4\0" \
Lukasz Majewskidd4ed882018-05-11 16:51:10 +0200272 "rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100273 __TFTP_UPDATE_ROOTFS \
Lukasz Majewskidd4ed882018-05-11 16:51:10 +0200274 "tftp_mmc_rootfs_bkp=" \
275 "setenv rootfs_part ${rootfs_part_backup};" \
276 "setenv rootfs_file ${rootfs_file_backup};" \
277 "run tftp_mmc_rootfs\0" \
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100278 TFTP_UPDATE_RECOVERY_SWU_KERNEL \
279 TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
280 "\0" \
281
282/* Miscellaneous configurable options */
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100283
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100284#define CONFIG_STANDALONE_LOAD_ADDR 0x10001000
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100285
286/* Physical Memory Map */
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100287#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
288#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
289
290#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
291#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
292
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100293/* ENV config */
294#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100295/* The 0x120000 value corresponds to above SPI-NOR memory MAP */
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100296#endif
297
298#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
299#endif /* __CONFIG_H */