Peter Pearse | 160131b | 2007-05-09 11:41:58 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> |
| 3 | * |
| 4 | * Modified to remove all but the IAP-command related code by |
| 5 | * Gary Jennejohn <garyj@denx.de> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or |
| 8 | * modify it under the terms of the GNU General Public License as |
| 9 | * published by the Free Software Foundation; either version 2 of |
| 10 | * the License, or (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 20 | * MA 02111-1307 USA |
| 21 | */ |
| 22 | |
| 23 | #include <common.h> |
| 24 | #include <asm/arch/hardware.h> |
| 25 | |
| 26 | /* IAP commands use 32 bytes at the top of CPU internal sram, we |
| 27 | use 512 bytes below that */ |
| 28 | #define COPY_BUFFER_LOCATION 0x40003de0 |
| 29 | |
| 30 | #define IAP_LOCATION 0x7ffffff1 |
| 31 | #define IAP_CMD_PREPARE 50 |
| 32 | #define IAP_CMD_COPY 51 |
| 33 | #define IAP_CMD_ERASE 52 |
| 34 | #define IAP_CMD_CHECK 53 |
| 35 | #define IAP_CMD_ID 54 |
| 36 | #define IAP_CMD_VERSION 55 |
| 37 | #define IAP_CMD_COMPARE 56 |
| 38 | |
| 39 | #define IAP_RET_CMD_SUCCESS 0 |
| 40 | |
| 41 | static unsigned long command[5]; |
| 42 | static unsigned long result[2]; |
| 43 | |
| 44 | extern void iap_entry(unsigned long * command, unsigned long * result); |
| 45 | |
| 46 | /*----------------------------------------------------------------------- |
| 47 | * |
| 48 | */ |
| 49 | static int get_flash_sector(flash_info_t * info, ulong flash_addr) |
| 50 | { |
| 51 | int i; |
| 52 | |
| 53 | for(i = 1; i < (info->sector_count); i++) { |
| 54 | if (flash_addr < (info->start[i])) |
| 55 | break; |
| 56 | } |
| 57 | |
| 58 | return (i-1); |
| 59 | } |
| 60 | |
| 61 | /*----------------------------------------------------------------------- |
| 62 | * This function assumes that flash_addr is aligned on 512 bytes boundary |
| 63 | * in flash. This function also assumes that prepare have been called |
| 64 | * for the sector in question. |
| 65 | */ |
| 66 | int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) |
| 67 | { |
| 68 | int first_sector; |
| 69 | int last_sector; |
| 70 | |
| 71 | first_sector = get_flash_sector(info, flash_addr); |
| 72 | last_sector = get_flash_sector(info, flash_addr + 512 - 1); |
| 73 | |
| 74 | /* prepare sectors for write */ |
| 75 | command[0] = IAP_CMD_PREPARE; |
| 76 | command[1] = first_sector; |
| 77 | command[2] = last_sector; |
| 78 | iap_entry(command, result); |
| 79 | if (result[0] != IAP_RET_CMD_SUCCESS) { |
| 80 | printf("IAP prepare failed\n"); |
| 81 | return ERR_PROG_ERROR; |
| 82 | } |
| 83 | |
| 84 | command[0] = IAP_CMD_COPY; |
| 85 | command[1] = flash_addr; |
| 86 | command[2] = COPY_BUFFER_LOCATION; |
| 87 | command[3] = 512; |
Jean-Christophe PLAGNIOL-VILLARD | 6d0f6bc | 2008-10-16 15:01:15 +0200 | [diff] [blame] | 88 | command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10; |
Peter Pearse | 160131b | 2007-05-09 11:41:58 +0100 | [diff] [blame] | 89 | iap_entry(command, result); |
| 90 | if (result[0] != IAP_RET_CMD_SUCCESS) { |
| 91 | printf("IAP copy failed\n"); |
| 92 | return 1; |
| 93 | } |
| 94 | |
| 95 | return 0; |
| 96 | } |
| 97 | |
| 98 | /*----------------------------------------------------------------------- |
| 99 | */ |
| 100 | |
| 101 | int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last) |
| 102 | { |
| 103 | int flag; |
| 104 | int prot; |
| 105 | int sect; |
| 106 | |
| 107 | prot = 0; |
| 108 | for (sect = s_first; sect <= s_last; ++sect) { |
| 109 | if (info->protect[sect]) { |
| 110 | prot++; |
| 111 | } |
| 112 | } |
| 113 | if (prot) |
| 114 | return ERR_PROTECTED; |
| 115 | |
| 116 | |
| 117 | flag = disable_interrupts(); |
| 118 | |
| 119 | printf ("Erasing %d sectors starting at sector %2d.\n" |
| 120 | "This make take some time ... ", |
| 121 | s_last - s_first + 1, s_first); |
| 122 | |
| 123 | command[0] = IAP_CMD_PREPARE; |
| 124 | command[1] = s_first; |
| 125 | command[2] = s_last; |
| 126 | iap_entry(command, result); |
| 127 | if (result[0] != IAP_RET_CMD_SUCCESS) { |
| 128 | printf("IAP prepare failed\n"); |
| 129 | return ERR_PROTECTED; |
| 130 | } |
| 131 | |
| 132 | command[0] = IAP_CMD_ERASE; |
| 133 | command[1] = s_first; |
| 134 | command[2] = s_last; |
Jean-Christophe PLAGNIOL-VILLARD | 6d0f6bc | 2008-10-16 15:01:15 +0200 | [diff] [blame] | 135 | command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10; |
Peter Pearse | 160131b | 2007-05-09 11:41:58 +0100 | [diff] [blame] | 136 | iap_entry(command, result); |
| 137 | if (result[0] != IAP_RET_CMD_SUCCESS) { |
| 138 | printf("IAP erase failed\n"); |
| 139 | return ERR_PROTECTED; |
| 140 | } |
| 141 | |
| 142 | if (flag) |
| 143 | enable_interrupts(); |
| 144 | |
| 145 | return ERR_OK; |
| 146 | } |
| 147 | |
| 148 | int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr, |
| 149 | ulong cnt) |
| 150 | { |
| 151 | int first_copy_size; |
| 152 | int last_copy_size; |
| 153 | int first_block; |
| 154 | int last_block; |
| 155 | int nbr_mid_blocks; |
| 156 | uchar memmap_value; |
| 157 | ulong i; |
| 158 | uchar* src_org; |
| 159 | uchar* dst_org; |
| 160 | int ret = ERR_OK; |
| 161 | |
| 162 | src_org = src; |
| 163 | dst_org = (uchar*)addr; |
| 164 | |
| 165 | first_block = addr / 512; |
| 166 | last_block = (addr + cnt) / 512; |
| 167 | nbr_mid_blocks = last_block - first_block - 1; |
| 168 | |
| 169 | first_copy_size = 512 - (addr % 512); |
| 170 | last_copy_size = (addr + cnt) % 512; |
| 171 | |
| 172 | debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " |
| 173 | "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", |
| 174 | (ulong)(first_block * 512), |
| 175 | (ulong)COPY_BUFFER_LOCATION, |
| 176 | (ulong)src, |
| 177 | (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), |
| 178 | first_copy_size, |
| 179 | (ulong)COPY_BUFFER_LOCATION, |
| 180 | (ulong)(first_block * 512)); |
| 181 | |
| 182 | /* copy first block */ |
| 183 | memcpy((void*)COPY_BUFFER_LOCATION, |
| 184 | (void*)(first_block * 512), 512); |
| 185 | memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), |
| 186 | src, first_copy_size); |
| 187 | lpc2292_copy_buffer_to_flash(info, first_block * 512); |
| 188 | src += first_copy_size; |
| 189 | addr += first_copy_size; |
| 190 | |
| 191 | /* copy middle blocks */ |
| 192 | for (i = 0; i < nbr_mid_blocks; i++) { |
| 193 | debug("copy middle block: %lX -> %lX 512 bytes, " |
| 194 | "%lX -> %lX 512 bytes\n", |
| 195 | (ulong)src, |
| 196 | (ulong)COPY_BUFFER_LOCATION, |
| 197 | (ulong)COPY_BUFFER_LOCATION, |
| 198 | (ulong)addr); |
| 199 | |
| 200 | memcpy((void*)COPY_BUFFER_LOCATION, src, 512); |
| 201 | lpc2292_copy_buffer_to_flash(info, addr); |
| 202 | src += 512; |
| 203 | addr += 512; |
| 204 | } |
| 205 | |
| 206 | |
| 207 | if (last_copy_size > 0) { |
| 208 | debug("copy last block: (1) %lX -> %lX 0x200 bytes, " |
| 209 | "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", |
| 210 | (ulong)(last_block * 512), |
| 211 | (ulong)COPY_BUFFER_LOCATION, |
| 212 | (ulong)src, |
| 213 | (ulong)(COPY_BUFFER_LOCATION), |
| 214 | last_copy_size, |
| 215 | (ulong)COPY_BUFFER_LOCATION, |
| 216 | (ulong)addr); |
| 217 | |
| 218 | /* copy last block */ |
| 219 | memcpy((void*)COPY_BUFFER_LOCATION, |
| 220 | (void*)(last_block * 512), 512); |
| 221 | memcpy((void*)COPY_BUFFER_LOCATION, |
| 222 | src, last_copy_size); |
| 223 | lpc2292_copy_buffer_to_flash(info, addr); |
| 224 | } |
| 225 | |
| 226 | /* verify write */ |
| 227 | memmap_value = GET8(MEMMAP); |
| 228 | |
| 229 | disable_interrupts(); |
| 230 | |
| 231 | PUT8(MEMMAP, 01); /* we must make sure that initial 64 |
| 232 | bytes are taken from flash when we |
| 233 | do the compare */ |
| 234 | |
| 235 | for (i = 0; i < cnt; i++) { |
| 236 | if (*dst_org != *src_org){ |
| 237 | printf("Write failed. Byte %lX differs\n", i); |
| 238 | ret = ERR_PROG_ERROR; |
| 239 | break; |
| 240 | } |
| 241 | dst_org++; |
| 242 | src_org++; |
| 243 | } |
| 244 | |
| 245 | PUT8(MEMMAP, memmap_value); |
| 246 | enable_interrupts(); |
| 247 | |
| 248 | return ret; |
| 249 | } |