blob: 4e798f014c992c949fdf186facae567c1c8b1de2 [file] [log] [blame]
Hans de Goededa52a4a2015-08-05 17:39:14 +02001/*
2 * Copyright 2015 Josef Gajdusek <atx@atx.name>
Hans de Goede80e5f832016-03-14 17:37:09 +01003 * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
Hans de Goededa52a4a2015-08-05 17:39:14 +02004 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun4i-a10.dtsi"
Hans de Goede80e5f832016-03-14 17:37:09 +010046#include "sunxi-itead-core-common.dtsi"
Hans de Goededa52a4a2015-08-05 17:39:14 +020047
48/ {
49 model = "Iteaduino Plus A10";
50 compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
Hans de Goededa52a4a2015-08-05 17:39:14 +020051};
52
53&ahci {
54 target-supply = <&reg_ahci_5v>;
55 status = "okay";
56};
57
Hans de Goededa52a4a2015-08-05 17:39:14 +020058&emac {
59 pinctrl-names = "default";
60 pinctrl-0 = <&emac_pins_a>;
61 phy = <&phy1>;
62 status = "okay";
63};
64
65&emac_sram {
66 status = "okay";
67};
68
69&i2c0 {
Hans de Goededa52a4a2015-08-05 17:39:14 +020070 axp209: pmic@34 {
Hans de Goededa52a4a2015-08-05 17:39:14 +020071 interrupts = <0>;
72 };
73};
74
75&i2c1 {
76 pinctrl-names = "default";
77 pinctrl-0 = <&i2c1_pins_a>;
78 status = "okay";
79};
80
81&i2c2 {
82 pinctrl-names = "default";
83 pinctrl-0 = <&i2c2_pins_a>;
84 status = "okay";
85};
86
87&ir0 {
88 pinctrl-names = "default";
89 pinctrl-0 = <&ir0_rx_pins_a>;
90 status = "okay";
91};
92
93&mdio {
94 status = "okay";
95
96 phy1: ethernet-phy@1 {
97 reg = <1>;
98 };
99};
100
101&mmc0 {
102 pinctrl-names = "default";
103 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
104 vmmc-supply = <&reg_vcc3v3>;
105 bus-width = <4>;
106 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
107 cd-inverted;
108 status = "okay";
109};
110
Hans de Goededa52a4a2015-08-05 17:39:14 +0200111&reg_ahci_5v {
112 status = "okay";
113};
114
Hans de Goededa52a4a2015-08-05 17:39:14 +0200115&spi0 {
116 pinctrl-names = "default";
117 pinctrl-0 = <&spi0_pins_a>,
118 <&spi0_cs0_pins_a>;
119 status = "okay";
120};