blob: ec982bdc51218725a0aa9aec1919754152b57414 [file] [log] [blame]
Wolfgang Denk7521af12005-10-09 01:04:33 +02001/*
2 * AMIRIX.h: AMIRIX specific config options
3 *
4 * Author : Frank Smith (smith at amirix dot com)
5 *
6 * Derived from : other configuration header files in this tree
7 *
8 * This software may be used and distributed according to the terms of
9 * the GNU General Public License (GPL) version 2, incorporated herein by
10 * reference. Drivers based on or derived from this code fall under the GPL
11 * and must retain the authorship, copyright and this license notice. This
12 * file is not a complete program and may only be used when the entire
13 * program is licensed under the GPL.
14 *
15 */
16
17#ifndef __CONFIG_H
18#define __CONFIG_H
19
20/*
21 * High Level Configuration Options
22 * (easy to change)
23 */
24
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020025#define CONFIG_405 1 /* This is a PPC405 CPU */
26#define CONFIG_4xx 1 /* ...member of PPC4xx family */
Wolfgang Denk7521af12005-10-09 01:04:33 +020027
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020028#define CONFIG_AP1000 1 /* ...on an AP1000 board */
Wolfgang Denk7521af12005-10-09 01:04:33 +020029
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020030#define CONFIG_PCI 1
Wolfgang Denk7521af12005-10-09 01:04:33 +020031
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020032#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
33#define CONFIG_SYS_PROMPT "0> "
34#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Wolfgang Denk7521af12005-10-09 01:04:33 +020035
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020036#define CONFIG_COMMAND_EDIT 1
37#define CONFIG_COMMAND_HISTORY 1
Wolfgang Denk7521af12005-10-09 01:04:33 +020038#define CONFIG_COMPLETE_ADDRESSES 1
39
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +020040#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020041#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Wolfgang Denk7521af12005-10-09 01:04:33 +020042
Jean-Christophe PLAGNIOL-VILLARD9314cee2008-09-10 22:47:59 +020043#ifdef CONFIG_ENV_IS_IN_NVRAM
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +020044#undef CONFIG_ENV_IS_IN_FLASH
Wolfgang Denk7521af12005-10-09 01:04:33 +020045#else
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +020046#ifdef CONFIG_ENV_IS_IN_FLASH
Jean-Christophe PLAGNIOL-VILLARD9314cee2008-09-10 22:47:59 +020047#undef CONFIG_ENV_IS_IN_NVRAM
Wolfgang Denk7521af12005-10-09 01:04:33 +020048#endif
49#endif
50
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020051#define CONFIG_BAUDRATE 57600
52#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
Wolfgang Denk7521af12005-10-09 01:04:33 +020053
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020054#define CONFIG_BOOTCOMMAND "" /* autoboot command */
Wolfgang Denk7521af12005-10-09 01:04:33 +020055
56/* Size (bytes) of interrupt driven serial port buffer.
57 * Set to 0 to use polling instead of interrupts.
58 * Setting to 0 will also disable RTS/CTS handshaking.
59 */
Wolfgang Denk3df5bea2005-10-09 01:41:48 +020060#undef CONFIG_SERIAL_SOFTWARE_FIFO
Wolfgang Denk7521af12005-10-09 01:04:33 +020061
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020062#define CONFIG_BOOTARGS "console=ttyS0,57600"
Wolfgang Denk7521af12005-10-09 01:04:33 +020063
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020064#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020065#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
Wolfgang Denk7521af12005-10-09 01:04:33 +020066
Wolfgang Denk7521af12005-10-09 01:04:33 +020067
Jon Loeliger498ff9a2007-07-05 19:13:52 -050068/*
Jon Loeliger11799432007-07-10 09:02:57 -050069 * BOOTP options
70 */
71#define CONFIG_BOOTP_BOOTFILESIZE
72#define CONFIG_BOOTP_BOOTPATH
73#define CONFIG_BOOTP_GATEWAY
74#define CONFIG_BOOTP_HOSTNAME
75
76/*
Jon Loeliger498ff9a2007-07-05 19:13:52 -050077 * Command line configuration.
78 */
79#include <config_cmd_default.h>
80
81#define CONFIG_CMD_ASKENV
82#define CONFIG_CMD_DHCP
83#define CONFIG_CMD_ELF
84#define CONFIG_CMD_IRQ
85#define CONFIG_CMD_MVENV
86#define CONFIG_CMD_PCI
87#define CONFIG_CMD_PING
88
Wolfgang Denk7521af12005-10-09 01:04:33 +020089
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020090#undef CONFIG_WATCHDOG /* watchdog disabled */
Wolfgang Denk7521af12005-10-09 01:04:33 +020091
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020092#define CONFIG_SYS_CLK_FREQ 30000000
Wolfgang Denk7521af12005-10-09 01:04:33 +020093
Wolfgang Denkf57f70a2005-10-13 01:45:54 +020094#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
Wolfgang Denk7521af12005-10-09 01:04:33 +020095
96/*
97 * Miscellaneous configurable options
98 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099#define CONFIG_SYS_LONGHELP /* undef to save memory */
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500100#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200101#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200102#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200104#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200105/* usually: (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) */
106#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+4+16) /* Print Buffer Size */
107#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
108#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200109
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200110#define CONFIG_SYS_ALT_MEMTEST 1
111#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
112#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 4 ... 16 MB in DRAM */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200113
114/*
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115 * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
116 * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
117 * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
Wolfgang Denk7521af12005-10-09 01:04:33 +0200118 * The Linux BASE_BAUD define should match this configuration.
119 * baseBaud = cpuClock/(uartDivisor*16)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120 * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
Wolfgang Denk7521af12005-10-09 01:04:33 +0200121 * set Linux BASE_BAUD to 403200.
122 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200123#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
124#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200125
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200126#define CONFIG_SYS_NS16550_CLK 40000000
127#define CONFIG_SYS_DUART_CHAN 0
128#define CONFIG_SYS_NS16550_COM1 (0x4C000000 + 0x1000)
129#define CONFIG_SYS_NS16550_COM2 (0x4C800000 + 0x1000)
130#define CONFIG_SYS_NS16550_REG_SIZE 4
131#define CONFIG_SYS_NS16550 1
132#define CONFIG_SYS_INIT_CHAN1 1
133#define CONFIG_SYS_INIT_CHAN2 0
Wolfgang Denk7521af12005-10-09 01:04:33 +0200134
135/* The following table includes the supported baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136#define CONFIG_SYS_BAUDRATE_TABLE \
Wolfgang Denk7521af12005-10-09 01:04:33 +0200137 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
138
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200139#define CONFIG_SYS_LOAD_ADDR 0x00200000 /* default load address */
140#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200141
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200142#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200143
144/*-----------------------------------------------------------------------
145 * Start addresses for the final memory configuration
146 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
Wolfgang Denk7521af12005-10-09 01:04:33 +0200148 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200149#define CONFIG_SYS_SDRAM_BASE 0x00000000
150#define CONFIG_SYS_FLASH_BASE 0x20000000
151#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
152#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
153#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200154
155/*
156 * For booting Linux, the board info and command line data
157 * have to be in the first 8 MB of memory, since this is
158 * the maximum mapped by the Linux kernel during initialization.
159 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200161/*-----------------------------------------------------------------------
162 * FLASH organization
163 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200164#define CONFIG_SYS_FLASH_CFI 1
165#define CONFIG_SYS_PROGFLASH_BASE CONFIG_SYS_FLASH_BASE
166#define CONFIG_SYS_CONFFLASH_BASE 0x24000000
Wolfgang Denk7521af12005-10-09 01:04:33 +0200167
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200168#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
169#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200170
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200171#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
172#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200173
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200174#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200175
176/* BEG ENVIRONNEMENT FLASH */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200177#ifdef CONFIG_ENV_IS_IN_FLASH
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200178#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */
179#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
180#define CONFIG_ENV_SECT_SIZE 0x20000 /* see README - env sector total size */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200181#endif
182/* END ENVIRONNEMENT FLASH */
183/*-----------------------------------------------------------------------
184 * NVRAM organization
185 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200186#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
187#define CONFIG_SYS_NVRAM_SIZE 0x1ff8 /* NVRAM size */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200188
Jean-Christophe PLAGNIOL-VILLARD9314cee2008-09-10 22:47:59 +0200189#ifdef CONFIG_ENV_IS_IN_NVRAM
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200190#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */
191#define CONFIG_ENV_ADDR \
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200192 (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200193#endif
Wolfgang Denk7521af12005-10-09 01:04:33 +0200194
195/*
196 * Init Memory Controller:
197 *
198 * BR0/1 and OR0/1 (FLASH)
199 */
200
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200201#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
Wolfgang Denkf57f70a2005-10-13 01:45:54 +0200202#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200203
204/* Configuration Port location */
Wolfgang Denkf57f70a2005-10-13 01:45:54 +0200205#define CONFIG_PORT_ADDR 0xF0000500
Wolfgang Denk7521af12005-10-09 01:04:33 +0200206
207/*-----------------------------------------------------------------------
208 * Definitions for initial stack pointer and data area (in DPRAM)
209 */
210
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_SYS_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */
212#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
213#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
214#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
215#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Wolfgang Denk7521af12005-10-09 01:04:33 +0200216
217/*-----------------------------------------------------------------------
218 * Definitions for Serial Presence Detect EEPROM address
219 * (to get SDRAM settings)
220 */
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200221#define SPD_EEPROM_ADDRESS 0x50
Wolfgang Denk7521af12005-10-09 01:04:33 +0200222
223/*
224 * Internal Definitions
225 *
226 * Boot Flags
227 */
Wolfgang Denkf57f70a2005-10-13 01:45:54 +0200228#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
229#define BOOTFLAG_WARM 0x02 /* Software reboot */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200230
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500231#if defined(CONFIG_CMD_KGDB)
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200232#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
Wolfgang Denkf57f70a2005-10-13 01:45:54 +0200233#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
Wolfgang Denk7521af12005-10-09 01:04:33 +0200234#endif
235
236/* JFFS2 stuff */
237
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_JFFS2_FIRST_BANK 0
239#define CONFIG_SYS_JFFS2_NUM_BANKS 1
240#define CONFIG_SYS_JFFS2_FIRST_SECTOR 1
Wolfgang Denk7521af12005-10-09 01:04:33 +0200241
242#define CONFIG_NET_MULTI
243#define CONFIG_E1000
244
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200245#define CONFIG_SYS_ETH_DEV_FN 0x0800
246#define CONFIG_SYS_ETH_IOBASE 0x31000000
247#define CONFIG_SYS_ETH_MEMBASE 0x32000000
Wolfgang Denk7521af12005-10-09 01:04:33 +0200248
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200249#endif /* __CONFIG_H */