blob: 8e98254e2d39b53bb431218ede0c14c8c08f2f62 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Wenyou Yangce4054b2017-09-13 14:58:54 +08002/*
3 * Configuration file for the SAMA5D27 SOM1 EK Board.
4 *
5 * Copyright (C) 2017 Microchip Corporation
6 * Wenyou Yang <wenyou.yang@microchip.com>
Wenyou Yangce4054b2017-09-13 14:58:54 +08007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#include "at91-sama5_common.h"
13
Wenyou Yangce4054b2017-09-13 14:58:54 +080014#undef CONFIG_SYS_AT91_MAIN_CLOCK
Wenyou Yangce4054b2017-09-13 14:58:54 +080015#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */
16
Wenyou Yangce4054b2017-09-13 14:58:54 +080017/* SDRAM */
Wenyou Yangce4054b2017-09-13 14:58:54 +080018#define CONFIG_SYS_SDRAM_BASE 0x20000000
19#define CONFIG_SYS_SDRAM_SIZE 0x8000000
20
21#ifdef CONFIG_SPL_BUILD
22#define CONFIG_SYS_INIT_SP_ADDR 0x218000
23#else
24#define CONFIG_SYS_INIT_SP_ADDR \
25 (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
26#endif
27
28#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
29
30/* NAND flash */
Wenyou Yangce4054b2017-09-13 14:58:54 +080031
32/* SPI flash */
Wenyou Yangce4054b2017-09-13 14:58:54 +080033
34#undef CONFIG_BOOTCOMMAND
35#ifdef CONFIG_SD_BOOT
Wenyou Yangce4054b2017-09-13 14:58:54 +080036/* bootstrap + u-boot + env in sd card */
Codrin Ciubotariu44956802018-08-21 15:46:07 +030037#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x21000000 at91-sama5d27_som1_ek.dtb; " \
38 "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 zImage; " \
Wenyou Yangce4054b2017-09-13 14:58:54 +080039 "bootz 0x22000000 - 0x21000000"
Wenyou Yangce4054b2017-09-13 14:58:54 +080040#endif
41
42#ifdef CONFIG_QSPI_BOOT
Wenyou Yangce4054b2017-09-13 14:58:54 +080043#undef CONFIG_BOOTARGS
44#define CONFIG_BOOTARGS \
45 "console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
46#endif
47
48/* SPL */
Wenyou Yangce4054b2017-09-13 14:58:54 +080049#define CONFIG_SPL_MAX_SIZE 0x10000
50#define CONFIG_SPL_BSS_START_ADDR 0x20000000
51#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
52#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
53#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
54
55#define CONFIG_SYS_MONITOR_LEN (512 << 10)
56
57#ifdef CONFIG_SD_BOOT
58#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
59#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
60#endif
61
Wenyou Yangce4054b2017-09-13 14:58:54 +080062#endif