blob: 89687015b2b42b657573e5bf2e5f70c01648c1f8 [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
3 * Andreas Heppel <aheppel@sysgo.de>
4 *
5 * (C) Copyright 2002
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * MA 02111-1307 USA
26 */
27
28/*
29 * PCI routines
30 */
31
32#include <common.h>
wdenkc6097192002-11-03 00:24:07 +000033#include <command.h>
wdenkc6097192002-11-03 00:24:07 +000034#include <asm/processor.h>
35#include <asm/io.h>
wdenkc6097192002-11-03 00:24:07 +000036#include <pci.h>
37
wdenkc6097192002-11-03 00:24:07 +000038extern int cmd_get_data_size(char* arg, int default_size);
39
40unsigned char ShortPCIListing = 1;
41
42/*
43 * Follows routines for the output of infos about devices on PCI bus.
44 */
45
46void pci_header_show(pci_dev_t dev);
47void pci_header_show_brief(pci_dev_t dev);
48
49/*
50 * Subroutine: pciinfo
51 *
52 * Description: Show information about devices on PCI bus.
53 * Depending on the define CFG_SHORT_PCI_LISTING
54 * the output will be more or less exhaustive.
55 *
56 * Inputs: bus_no the number of the bus to be scanned.
57 *
58 * Return: None
59 *
60 */
61void pciinfo(int BusNum, int ShortPCIListing)
62{
63 int Device;
64 int Function;
65 unsigned char HeaderType;
66 unsigned short VendorID;
67 pci_dev_t dev;
68
69 printf("Scanning PCI devices on bus %d\n", BusNum);
70
71 if (ShortPCIListing) {
72 printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n");
73 printf("_____________________________________________________________\n");
74 }
75
76 for (Device = 0; Device < PCI_MAX_PCI_DEVICES; Device++) {
77 HeaderType = 0;
78 VendorID = 0;
79 for (Function = 0; Function < PCI_MAX_PCI_FUNCTIONS; Function++) {
80 /*
81 * If this is not a multi-function device, we skip the rest.
82 */
83 if (Function && !(HeaderType & 0x80))
84 break;
85
86 dev = PCI_BDF(BusNum, Device, Function);
87
88 pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
89 if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
90 continue;
91
wdenkc7de8292002-11-19 11:04:11 +000092 if (!Function) pci_read_config_byte(dev, PCI_HEADER_TYPE, &HeaderType);
wdenkc6097192002-11-03 00:24:07 +000093
94 if (ShortPCIListing)
95 {
96 printf("%02x.%02x.%02x ", BusNum, Device, Function);
97 pci_header_show_brief(dev);
98 }
99 else
100 {
101 printf("\nFound PCI device %02x.%02x.%02x:\n",
102 BusNum, Device, Function);
103 pci_header_show(dev);
104 }
105 }
106 }
107}
108
wdenk5d232d02003-05-22 22:52:13 +0000109static char *pci_classes_str(u8 class)
wdenkc6097192002-11-03 00:24:07 +0000110{
wdenk06d01db2003-03-14 20:47:52 +0000111 switch (class) {
wdenk8bde7f72003-06-27 21:31:46 +0000112 case PCI_CLASS_NOT_DEFINED:
113 return "Build before PCI Rev2.0";
114 break;
115 case PCI_BASE_CLASS_STORAGE:
116 return "Mass storage controller";
117 break;
118 case PCI_BASE_CLASS_NETWORK:
119 return "Network controller";
120 break;
121 case PCI_BASE_CLASS_DISPLAY:
122 return "Display controller";
123 break;
124 case PCI_BASE_CLASS_MULTIMEDIA:
125 return "Multimedia device";
126 break;
127 case PCI_BASE_CLASS_MEMORY:
128 return "Memory controller";
129 break;
130 case PCI_BASE_CLASS_BRIDGE:
131 return "Bridge device";
132 break;
133 case PCI_BASE_CLASS_COMMUNICATION:
134 return "Simple comm. controller";
135 break;
136 case PCI_BASE_CLASS_SYSTEM:
137 return "Base system peripheral";
138 break;
139 case PCI_BASE_CLASS_INPUT:
140 return "Input device";
141 break;
142 case PCI_BASE_CLASS_DOCKING:
143 return "Docking station";
144 break;
145 case PCI_BASE_CLASS_PROCESSOR:
146 return "Processor";
147 break;
148 case PCI_BASE_CLASS_SERIAL:
149 return "Serial bus controller";
150 break;
151 case PCI_BASE_CLASS_INTELLIGENT:
152 return "Intelligent controller";
153 break;
154 case PCI_BASE_CLASS_SATELLITE:
155 return "Satellite controller";
156 break;
157 case PCI_BASE_CLASS_CRYPT:
158 return "Cryptographic device";
159 break;
160 case PCI_BASE_CLASS_SIGNAL_PROCESSING:
161 return "DSP";
162 break;
163 case PCI_CLASS_OTHERS:
164 return "Does not fit any class";
165 break;
166 default:
wdenk5d232d02003-05-22 22:52:13 +0000167 return "???";
wdenk8bde7f72003-06-27 21:31:46 +0000168 break;
wdenk06d01db2003-03-14 20:47:52 +0000169 };
wdenkc6097192002-11-03 00:24:07 +0000170}
171
172/*
173 * Subroutine: pci_header_show_brief
174 *
175 * Description: Reads and prints the header of the
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200176 * specified PCI device in short form.
wdenkc6097192002-11-03 00:24:07 +0000177 *
178 * Inputs: dev Bus+Device+Function number
179 *
180 * Return: None
181 *
182 */
183void pci_header_show_brief(pci_dev_t dev)
184{
185 u16 vendor, device;
186 u8 class, subclass;
187
188 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
189 pci_read_config_word(dev, PCI_DEVICE_ID, &device);
190 pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
191 pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
192
wdenk5d232d02003-05-22 22:52:13 +0000193 printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
wdenkc6097192002-11-03 00:24:07 +0000194 vendor, device,
195 pci_classes_str(class), subclass);
196}
197
198/*
199 * Subroutine: PCI_Header_Show
200 *
201 * Description: Reads the header of the specified PCI device.
202 *
203 * Inputs: BusDevFunc Bus+Device+Function number
204 *
205 * Return: None
206 *
207 */
208void pci_header_show(pci_dev_t dev)
209{
210 u8 _byte, header_type;
211 u16 _word;
212 u32 _dword;
213
214#define PRINT(msg, type, reg) \
215 pci_read_config_##type(dev, reg, &_##type); \
216 printf(msg, _##type)
217
218#define PRINT2(msg, type, reg, func) \
219 pci_read_config_##type(dev, reg, &_##type); \
220 printf(msg, _##type, func(_##type))
221
222 pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
223
224 PRINT (" vendor ID = 0x%.4x\n", word, PCI_VENDOR_ID);
225 PRINT (" device ID = 0x%.4x\n", word, PCI_DEVICE_ID);
226 PRINT (" command register = 0x%.4x\n", word, PCI_COMMAND);
227 PRINT (" status register = 0x%.4x\n", word, PCI_STATUS);
228 PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID);
229 PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
wdenk8bde7f72003-06-27 21:31:46 +0000230 pci_classes_str);
wdenkc6097192002-11-03 00:24:07 +0000231 PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
232 PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG);
233 PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
234 PRINT (" latency time = 0x%.2x\n", byte, PCI_LATENCY_TIMER);
235 PRINT (" header type = 0x%.2x\n", byte, PCI_HEADER_TYPE);
236 PRINT (" BIST = 0x%.2x\n", byte, PCI_BIST);
237 PRINT (" base address 0 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_0);
wdenkc6097192002-11-03 00:24:07 +0000238
wdenk7c7a23b2002-12-07 00:20:59 +0000239 switch (header_type & 0x03) {
240 case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */
241 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
242 PRINT (" base address 2 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_2);
243 PRINT (" base address 3 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_3);
244 PRINT (" base address 4 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_4);
245 PRINT (" base address 5 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_5);
246 PRINT (" cardBus CIS pointer = 0x%.8x\n", dword, PCI_CARDBUS_CIS);
247 PRINT (" sub system vendor ID = 0x%.4x\n", word, PCI_SUBSYSTEM_VENDOR_ID);
248 PRINT (" sub system ID = 0x%.4x\n", word, PCI_SUBSYSTEM_ID);
249 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS);
250 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
251 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
252 PRINT (" min Grant = 0x%.2x\n", byte, PCI_MIN_GNT);
253 PRINT (" max Latency = 0x%.2x\n", byte, PCI_MAX_LAT);
254 break;
wdenk8bde7f72003-06-27 21:31:46 +0000255
wdenk7c7a23b2002-12-07 00:20:59 +0000256 case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */
257
258 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
wdenkc6097192002-11-03 00:24:07 +0000259 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_PRIMARY_BUS);
260 PRINT (" secondary bus number = 0x%.2x\n", byte, PCI_SECONDARY_BUS);
261 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_SUBORDINATE_BUS);
262 PRINT (" secondary latency timer = 0x%.2x\n", byte, PCI_SEC_LATENCY_TIMER);
263 PRINT (" IO base = 0x%.2x\n", byte, PCI_IO_BASE);
264 PRINT (" IO limit = 0x%.2x\n", byte, PCI_IO_LIMIT);
265 PRINT (" secondary status = 0x%.4x\n", word, PCI_SEC_STATUS);
266 PRINT (" memory base = 0x%.4x\n", word, PCI_MEMORY_BASE);
267 PRINT (" memory limit = 0x%.4x\n", word, PCI_MEMORY_LIMIT);
268 PRINT (" prefetch memory base = 0x%.4x\n", word, PCI_PREF_MEMORY_BASE);
269 PRINT (" prefetch memory limit = 0x%.4x\n", word, PCI_PREF_MEMORY_LIMIT);
270 PRINT (" prefetch memory base upper = 0x%.8x\n", dword, PCI_PREF_BASE_UPPER32);
271 PRINT (" prefetch memory limit upper = 0x%.8x\n", dword, PCI_PREF_LIMIT_UPPER32);
272 PRINT (" IO base upper 16 bits = 0x%.4x\n", word, PCI_IO_BASE_UPPER16);
273 PRINT (" IO limit upper 16 bits = 0x%.4x\n", word, PCI_IO_LIMIT_UPPER16);
274 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS1);
275 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
276 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
277 PRINT (" bridge control = 0x%.4x\n", word, PCI_BRIDGE_CONTROL);
wdenk7c7a23b2002-12-07 00:20:59 +0000278 break;
279
280 case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */
281
282 PRINT (" capabilities = 0x%.2x\n", byte, PCI_CB_CAPABILITY_LIST);
283 PRINT (" secondary status = 0x%.4x\n", word, PCI_CB_SEC_STATUS);
284 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_CB_PRIMARY_BUS);
285 PRINT (" CardBus number = 0x%.2x\n", byte, PCI_CB_CARD_BUS);
286 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS);
wdenk8bde7f72003-06-27 21:31:46 +0000287 PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
wdenk7c7a23b2002-12-07 00:20:59 +0000288 PRINT (" CardBus memory base 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0);
289 PRINT (" CardBus memory limit 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0);
290 PRINT (" CardBus memory base 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1);
291 PRINT (" CardBus memory limit 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_1);
292 PRINT (" CardBus IO base 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0);
293 PRINT (" CardBus IO base high 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0_HI);
294 PRINT (" CardBus IO limit 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0);
295 PRINT (" CardBus IO limit high 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0_HI);
296 PRINT (" CardBus IO base 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1);
297 PRINT (" CardBus IO base high 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1_HI);
298 PRINT (" CardBus IO limit 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1);
299 PRINT (" CardBus IO limit high 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1_HI);
300 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
301 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
302 PRINT (" bridge control = 0x%.4x\n", word, PCI_CB_BRIDGE_CONTROL);
303 PRINT (" subvendor ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_VENDOR_ID);
304 PRINT (" subdevice ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID);
305 PRINT (" PC Card 16bit base address = 0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE);
306 break;
wdenk8bde7f72003-06-27 21:31:46 +0000307
wdenk7c7a23b2002-12-07 00:20:59 +0000308 default:
309 printf("unknown header\n");
wdenk8bde7f72003-06-27 21:31:46 +0000310 break;
wdenkc6097192002-11-03 00:24:07 +0000311 }
312
313#undef PRINT
314#undef PRINT2
315}
316
317/* Convert the "bus.device.function" identifier into a number.
318 */
319static pci_dev_t get_pci_dev(char* name)
320{
321 char cnum[12];
322 int len, i, iold, n;
323 int bdfs[3] = {0,0,0};
324
325 len = strlen(name);
326 if (len > 8)
327 return -1;
328 for (i = 0, iold = 0, n = 0; i < len; i++) {
329 if (name[i] == '.') {
330 memcpy(cnum, &name[iold], i - iold);
331 cnum[i - iold] = '\0';
332 bdfs[n++] = simple_strtoul(cnum, NULL, 16);
333 iold = i + 1;
334 }
335 }
336 strcpy(cnum, &name[iold]);
337 if (n == 0)
338 n = 1;
339 bdfs[n] = simple_strtoul(cnum, NULL, 16);
340 return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]);
341}
342
343static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length)
344{
345#define DISP_LINE_LEN 16
346 ulong i, nbytes, linebytes;
347 int rc = 0;
348
349 if (length == 0)
350 length = 0x40 / size; /* Standard PCI configuration space */
351
352 /* Print the lines.
353 * once, and all accesses are with the specified bus width.
354 */
355 nbytes = length * size;
356 do {
357 uint val4;
358 ushort val2;
359 u_char val1;
360
361 printf("%08lx:", addr);
362 linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
363 for (i=0; i<linebytes; i+= size) {
364 if (size == 4) {
365 pci_read_config_dword(bdf, addr, &val4);
366 printf(" %08x", val4);
367 } else if (size == 2) {
368 pci_read_config_word(bdf, addr, &val2);
369 printf(" %04x", val2);
370 } else {
371 pci_read_config_byte(bdf, addr, &val1);
372 printf(" %02x", val1);
373 }
374 addr += size;
375 }
376 printf("\n");
377 nbytes -= linebytes;
378 if (ctrlc()) {
379 rc = 1;
380 break;
381 }
382 } while (nbytes > 0);
383
384 return (rc);
385}
386
387static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value)
388{
389 if (size == 4) {
390 pci_write_config_dword(bdf, addr, value);
391 }
392 else if (size == 2) {
393 ushort val = value & 0xffff;
394 pci_write_config_word(bdf, addr, val);
395 }
396 else {
397 u_char val = value & 0xff;
398 pci_write_config_byte(bdf, addr, val);
399 }
400 return 0;
401}
402
403static int
404pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag)
405{
406 ulong i;
407 int nbytes;
408 extern char console_buffer[];
409 uint val4;
410 ushort val2;
411 u_char val1;
412
413 /* Print the address, followed by value. Then accept input for
414 * the next value. A non-converted value exits.
415 */
416 do {
417 printf("%08lx:", addr);
418 if (size == 4) {
419 pci_read_config_dword(bdf, addr, &val4);
420 printf(" %08x", val4);
421 }
422 else if (size == 2) {
423 pci_read_config_word(bdf, addr, &val2);
424 printf(" %04x", val2);
425 }
426 else {
427 pci_read_config_byte(bdf, addr, &val1);
428 printf(" %02x", val1);
429 }
430
431 nbytes = readline (" ? ");
432 if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
433 /* <CR> pressed as only input, don't modify current
434 * location and move to next. "-" pressed will go back.
435 */
436 if (incrflag)
437 addr += nbytes ? -size : size;
438 nbytes = 1;
439#ifdef CONFIG_BOOT_RETRY_TIME
440 reset_cmd_timeout(); /* good enough to not time out */
441#endif
442 }
443#ifdef CONFIG_BOOT_RETRY_TIME
444 else if (nbytes == -2) {
445 break; /* timed out, exit the command */
446 }
447#endif
448 else {
449 char *endp;
450 i = simple_strtoul(console_buffer, &endp, 16);
451 nbytes = endp - console_buffer;
452 if (nbytes) {
453#ifdef CONFIG_BOOT_RETRY_TIME
454 /* good enough to not time out
455 */
456 reset_cmd_timeout();
457#endif
458 pci_cfg_write (bdf, addr, size, i);
459 if (incrflag)
460 addr += size;
461 }
462 }
463 } while (nbytes);
464
465 return 0;
466}
467
468/* PCI Configuration Space access commands
469 *
470 * Syntax:
471 * pci display[.b, .w, .l] bus.device.function} [addr] [len]
472 * pci next[.b, .w, .l] bus.device.function [addr]
473 * pci modify[.b, .w, .l] bus.device.function [addr]
474 * pci write[.b, .w, .l] bus.device.function addr value
475 */
476int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
477{
478 ulong addr = 0, value = 0, size = 0;
479 pci_dev_t bdf = 0;
480 char cmd = 's';
481
482 if (argc > 1)
483 cmd = argv[1][0];
484
485 switch (cmd) {
486 case 'd': /* display */
487 case 'n': /* next */
488 case 'm': /* modify */
489 case 'w': /* write */
490 /* Check for a size specification. */
491 size = cmd_get_data_size(argv[1], 4);
492 if (argc > 3)
493 addr = simple_strtoul(argv[3], NULL, 16);
494 if (argc > 4)
495 value = simple_strtoul(argv[4], NULL, 16);
496 case 'h': /* header */
497 if (argc < 3)
498 goto usage;
499 if ((bdf = get_pci_dev(argv[2])) == -1)
500 return 1;
501 break;
502 default: /* scan bus */
503 value = 1; /* short listing */
504 bdf = 0; /* bus number */
505 if (argc > 1) {
506 if (argv[argc-1][0] == 'l') {
507 value = 0;
508 argc--;
509 }
510 if (argc > 1)
511 bdf = simple_strtoul(argv[1], NULL, 16);
512 }
513 pciinfo(bdf, value);
514 return 0;
515 }
516
517 switch (argv[1][0]) {
518 case 'h': /* header */
519 pci_header_show(bdf);
520 return 0;
521 case 'd': /* display */
522 return pci_cfg_display(bdf, addr, size, value);
523 case 'n': /* next */
524 if (argc < 4)
525 goto usage;
526 return pci_cfg_modify(bdf, addr, size, value, 0);
527 case 'm': /* modify */
528 if (argc < 4)
529 goto usage;
530 return pci_cfg_modify(bdf, addr, size, value, 1);
531 case 'w': /* write */
532 if (argc < 5)
533 goto usage;
534 return pci_cfg_write(bdf, addr, size, value);
535 }
536
537 return 1;
538 usage:
539 printf ("Usage:\n%s\n", cmdtp->usage);
540 return 1;
541}
542
wdenk8bde7f72003-06-27 21:31:46 +0000543/***************************************************/
544
545
wdenk0d498392003-07-01 21:06:45 +0000546U_BOOT_CMD(
547 pci, 5, 1, do_pci,
wdenk256d31c2005-03-20 22:33:46 +0000548 "pci - list and access PCI Configuration Space\n",
wdenk8bde7f72003-06-27 21:31:46 +0000549 "[bus] [long]\n"
550 " - short or long list of PCI devices on bus 'bus'\n"
551 "pci header b.d.f\n"
552 " - show header of PCI device 'bus.device.function'\n"
553 "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
554 " - display PCI configuration space (CFG)\n"
555 "pci next[.b, .w, .l] b.d.f address\n"
556 " - modify, read and keep CFG address\n"
557 "pci modify[.b, .w, .l] b.d.f address\n"
558 " - modify, auto increment CFG address\n"
559 "pci write[.b, .w, .l] b.d.f address value\n"
560 " - write to CFG address\n"
561);