Guochun Mao | 052cafd | 2018-10-12 15:01:06 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (c) 2018 MediaTek, Inc. |
| 4 | * Author : Guochun.Mao@mediatek.com |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <dm.h> |
| 9 | #include <malloc.h> |
| 10 | #include <spi.h> |
| 11 | #include <asm/io.h> |
| 12 | #include <linux/iopoll.h> |
| 13 | #include <linux/ioport.h> |
| 14 | |
| 15 | /* Register Offset */ |
| 16 | struct mtk_qspi_regs { |
| 17 | u32 cmd; |
| 18 | u32 cnt; |
| 19 | u32 rdsr; |
| 20 | u32 rdata; |
| 21 | u32 radr[3]; |
| 22 | u32 wdata; |
| 23 | u32 prgdata[6]; |
| 24 | u32 shreg[10]; |
| 25 | u32 cfg[2]; |
| 26 | u32 shreg10; |
| 27 | u32 mode_mon; |
| 28 | u32 status[4]; |
| 29 | u32 flash_time; |
| 30 | u32 flash_cfg; |
| 31 | u32 reserved_0[3]; |
| 32 | u32 sf_time; |
| 33 | u32 pp_dw_data; |
| 34 | u32 reserved_1; |
| 35 | u32 delsel_0[2]; |
| 36 | u32 intrstus; |
| 37 | u32 intren; |
| 38 | u32 reserved_2; |
| 39 | u32 cfg3; |
| 40 | u32 reserved_3; |
| 41 | u32 chksum; |
| 42 | u32 aaicmd; |
| 43 | u32 wrprot; |
| 44 | u32 radr3; |
| 45 | u32 dual; |
| 46 | u32 delsel_1[3]; |
| 47 | }; |
| 48 | |
| 49 | struct mtk_qspi_platdata { |
| 50 | fdt_addr_t reg_base; |
| 51 | fdt_addr_t mem_base; |
| 52 | }; |
| 53 | |
| 54 | struct mtk_qspi_priv { |
| 55 | struct mtk_qspi_regs *regs; |
| 56 | unsigned long *mem_base; |
| 57 | u8 op; |
| 58 | u8 tx[3]; /* only record max 3 bytes paras, when it's address. */ |
| 59 | u32 txlen; /* dout buffer length - op code length */ |
| 60 | u8 *rx; |
| 61 | u32 rxlen; |
| 62 | }; |
| 63 | |
| 64 | #define MTK_QSPI_CMD_POLLINGREG_US 500000 |
| 65 | #define MTK_QSPI_WRBUF_SIZE 256 |
| 66 | #define MTK_QSPI_COMMAND_ENABLE 0x30 |
| 67 | |
| 68 | /* NOR flash controller commands */ |
| 69 | #define MTK_QSPI_RD_TRIGGER BIT(0) |
| 70 | #define MTK_QSPI_READSTATUS BIT(1) |
| 71 | #define MTK_QSPI_PRG_CMD BIT(2) |
| 72 | #define MTK_QSPI_WR_TRIGGER BIT(4) |
| 73 | #define MTK_QSPI_WRITESTATUS BIT(5) |
| 74 | #define MTK_QSPI_AUTOINC BIT(7) |
| 75 | |
| 76 | #define MTK_QSPI_MAX_RX_TX_SHIFT 0x6 |
| 77 | #define MTK_QSPI_MAX_SHIFT 0x8 |
| 78 | |
| 79 | #define MTK_QSPI_WR_BUF_ENABLE 0x1 |
| 80 | #define MTK_QSPI_WR_BUF_DISABLE 0x0 |
| 81 | |
| 82 | static int mtk_qspi_execute_cmd(struct mtk_qspi_priv *priv, u8 cmd) |
| 83 | { |
| 84 | u8 tmp; |
| 85 | u8 val = cmd & ~MTK_QSPI_AUTOINC; |
| 86 | |
| 87 | writeb(cmd, &priv->regs->cmd); |
| 88 | |
| 89 | return readb_poll_timeout(&priv->regs->cmd, tmp, !(val & tmp), |
| 90 | MTK_QSPI_CMD_POLLINGREG_US); |
| 91 | } |
| 92 | |
| 93 | static int mtk_qspi_tx_rx(struct mtk_qspi_priv *priv) |
| 94 | { |
| 95 | int len = 1 + priv->txlen + priv->rxlen; |
| 96 | int i, ret, idx; |
| 97 | |
| 98 | if (len > MTK_QSPI_MAX_SHIFT) |
| 99 | return -ERR_INVAL; |
| 100 | |
| 101 | writeb(len * 8, &priv->regs->cnt); |
| 102 | |
| 103 | /* start at PRGDATA5, go down to PRGDATA0 */ |
| 104 | idx = MTK_QSPI_MAX_RX_TX_SHIFT - 1; |
| 105 | |
| 106 | /* opcode */ |
| 107 | writeb(priv->op, &priv->regs->prgdata[idx]); |
| 108 | idx--; |
| 109 | |
| 110 | /* program TX data */ |
| 111 | for (i = 0; i < priv->txlen; i++, idx--) |
| 112 | writeb(priv->tx[i], &priv->regs->prgdata[idx]); |
| 113 | |
| 114 | /* clear out rest of TX registers */ |
| 115 | while (idx >= 0) { |
| 116 | writeb(0, &priv->regs->prgdata[idx]); |
| 117 | idx--; |
| 118 | } |
| 119 | |
| 120 | ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_PRG_CMD); |
| 121 | if (ret) |
| 122 | return ret; |
| 123 | |
| 124 | /* restart at first RX byte */ |
| 125 | idx = priv->rxlen - 1; |
| 126 | |
| 127 | /* read out RX data */ |
| 128 | for (i = 0; i < priv->rxlen; i++, idx--) |
| 129 | priv->rx[i] = readb(&priv->regs->shreg[idx]); |
| 130 | |
| 131 | return 0; |
| 132 | } |
| 133 | |
| 134 | static int mtk_qspi_read(struct mtk_qspi_priv *priv, |
| 135 | u32 addr, u8 *buf, u32 len) |
| 136 | { |
| 137 | memcpy(buf, (u8 *)priv->mem_base + addr, len); |
| 138 | return 0; |
| 139 | } |
| 140 | |
| 141 | static void mtk_qspi_set_addr(struct mtk_qspi_priv *priv, u32 addr) |
| 142 | { |
| 143 | int i; |
| 144 | |
| 145 | for (i = 0; i < 3; i++) { |
| 146 | writeb(addr & 0xff, &priv->regs->radr[i]); |
| 147 | addr >>= 8; |
| 148 | } |
| 149 | } |
| 150 | |
| 151 | static int mtk_qspi_write_single_byte(struct mtk_qspi_priv *priv, |
| 152 | u32 addr, u32 length, const u8 *data) |
| 153 | { |
| 154 | int i, ret; |
| 155 | |
| 156 | mtk_qspi_set_addr(priv, addr); |
| 157 | |
| 158 | for (i = 0; i < length; i++) { |
| 159 | writeb(*data++, &priv->regs->wdata); |
| 160 | ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER); |
| 161 | if (ret < 0) |
| 162 | return ret; |
| 163 | } |
| 164 | return 0; |
| 165 | } |
| 166 | |
| 167 | static int mtk_qspi_write_buffer(struct mtk_qspi_priv *priv, u32 addr, |
| 168 | const u8 *buf) |
| 169 | { |
| 170 | int i, data; |
| 171 | |
| 172 | mtk_qspi_set_addr(priv, addr); |
| 173 | |
| 174 | for (i = 0; i < MTK_QSPI_WRBUF_SIZE; i += 4) { |
| 175 | data = buf[i + 3] << 24 | buf[i + 2] << 16 | |
| 176 | buf[i + 1] << 8 | buf[i]; |
| 177 | writel(data, &priv->regs->pp_dw_data); |
| 178 | } |
| 179 | |
| 180 | return mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER); |
| 181 | } |
| 182 | |
| 183 | static int mtk_qspi_write(struct mtk_qspi_priv *priv, |
| 184 | u32 addr, const u8 *buf, u32 len) |
| 185 | { |
| 186 | int ret; |
| 187 | |
| 188 | /* setting pre-fetch buffer for page program */ |
| 189 | writel(MTK_QSPI_WR_BUF_ENABLE, &priv->regs->cfg[1]); |
| 190 | while (len >= MTK_QSPI_WRBUF_SIZE) { |
| 191 | ret = mtk_qspi_write_buffer(priv, addr, buf); |
| 192 | if (ret < 0) |
| 193 | return ret; |
| 194 | |
| 195 | len -= MTK_QSPI_WRBUF_SIZE; |
| 196 | addr += MTK_QSPI_WRBUF_SIZE; |
| 197 | buf += MTK_QSPI_WRBUF_SIZE; |
| 198 | } |
| 199 | /* disable pre-fetch buffer for page program */ |
| 200 | writel(MTK_QSPI_WR_BUF_DISABLE, &priv->regs->cfg[1]); |
| 201 | |
| 202 | if (len) |
| 203 | return mtk_qspi_write_single_byte(priv, addr, len, buf); |
| 204 | |
| 205 | return 0; |
| 206 | } |
| 207 | |
| 208 | static int mtk_qspi_claim_bus(struct udevice *dev) |
| 209 | { |
| 210 | /* nothing to do */ |
| 211 | return 0; |
| 212 | } |
| 213 | |
| 214 | static int mtk_qspi_release_bus(struct udevice *dev) |
| 215 | { |
| 216 | /* nothing to do */ |
| 217 | return 0; |
| 218 | } |
| 219 | |
| 220 | static int mtk_qspi_transfer(struct mtk_qspi_priv *priv, unsigned int bitlen, |
| 221 | const void *dout, void *din, unsigned long flags) |
| 222 | { |
| 223 | u32 bytes = DIV_ROUND_UP(bitlen, 8); |
| 224 | u32 addr; |
| 225 | |
| 226 | if (!bytes) |
| 227 | return -ERR_INVAL; |
| 228 | |
| 229 | if (dout) { |
| 230 | if (flags & SPI_XFER_BEGIN) { |
| 231 | /* parse op code and potential paras first */ |
| 232 | priv->op = *(u8 *)dout; |
| 233 | if (bytes > 1) |
| 234 | memcpy(priv->tx, (u8 *)dout + 1, |
| 235 | bytes <= 4 ? bytes - 1 : 3); |
| 236 | priv->txlen = bytes - 1; |
| 237 | } |
| 238 | |
| 239 | if (flags == SPI_XFER_ONCE) { |
| 240 | /* operations without receiving or sending data. |
| 241 | * for example: erase, write flash register or write |
| 242 | * enable... |
| 243 | */ |
| 244 | priv->rx = NULL; |
| 245 | priv->rxlen = 0; |
| 246 | return mtk_qspi_tx_rx(priv); |
| 247 | } |
| 248 | |
| 249 | if (flags & SPI_XFER_END) { |
| 250 | /* here, dout should be data to be written. |
| 251 | * and priv->tx should be filled 3Bytes address. |
| 252 | */ |
| 253 | addr = priv->tx[0] << 16 | priv->tx[1] << 8 | |
| 254 | priv->tx[2]; |
| 255 | return mtk_qspi_write(priv, addr, (u8 *)dout, bytes); |
| 256 | } |
| 257 | } |
| 258 | |
| 259 | if (din) { |
| 260 | if (priv->txlen >= 3) { |
| 261 | /* if run to here, priv->tx[] should be the address |
| 262 | * where read data from, |
| 263 | * and, din is the buf to receive data. |
| 264 | */ |
| 265 | addr = priv->tx[0] << 16 | priv->tx[1] << 8 | |
| 266 | priv->tx[2]; |
| 267 | return mtk_qspi_read(priv, addr, (u8 *)din, bytes); |
| 268 | } |
| 269 | |
| 270 | /* should be reading flash's register */ |
| 271 | priv->rx = (u8 *)din; |
| 272 | priv->rxlen = bytes; |
| 273 | return mtk_qspi_tx_rx(priv); |
| 274 | } |
| 275 | |
| 276 | return 0; |
| 277 | } |
| 278 | |
| 279 | static int mtk_qspi_xfer(struct udevice *dev, unsigned int bitlen, |
| 280 | const void *dout, void *din, unsigned long flags) |
| 281 | { |
| 282 | struct udevice *bus = dev->parent; |
| 283 | struct mtk_qspi_priv *priv = dev_get_priv(bus); |
| 284 | |
| 285 | return mtk_qspi_transfer(priv, bitlen, dout, din, flags); |
| 286 | } |
| 287 | |
| 288 | static int mtk_qspi_set_speed(struct udevice *bus, uint speed) |
| 289 | { |
| 290 | /* nothing to do */ |
| 291 | return 0; |
| 292 | } |
| 293 | |
| 294 | static int mtk_qspi_set_mode(struct udevice *bus, uint mode) |
| 295 | { |
| 296 | /* nothing to do */ |
| 297 | return 0; |
| 298 | } |
| 299 | |
| 300 | static int mtk_qspi_ofdata_to_platdata(struct udevice *bus) |
| 301 | { |
| 302 | struct resource res_reg, res_mem; |
| 303 | struct mtk_qspi_platdata *plat = bus->platdata; |
| 304 | int ret; |
| 305 | |
| 306 | ret = dev_read_resource_byname(bus, "reg_base", &res_reg); |
| 307 | if (ret) { |
| 308 | debug("can't get reg_base resource(ret = %d)\n", ret); |
| 309 | return -ENOMEM; |
| 310 | } |
| 311 | |
| 312 | ret = dev_read_resource_byname(bus, "mem_base", &res_mem); |
| 313 | if (ret) { |
| 314 | debug("can't get map_base resource(ret = %d)\n", ret); |
| 315 | return -ENOMEM; |
| 316 | } |
| 317 | |
| 318 | plat->mem_base = res_mem.start; |
| 319 | plat->reg_base = res_reg.start; |
| 320 | |
| 321 | return 0; |
| 322 | } |
| 323 | |
| 324 | static int mtk_qspi_probe(struct udevice *bus) |
| 325 | { |
| 326 | struct mtk_qspi_platdata *plat = dev_get_platdata(bus); |
| 327 | struct mtk_qspi_priv *priv = dev_get_priv(bus); |
| 328 | |
| 329 | priv->regs = (struct mtk_qspi_regs *)plat->reg_base; |
| 330 | priv->mem_base = (unsigned long *)plat->mem_base; |
| 331 | |
| 332 | writel(MTK_QSPI_COMMAND_ENABLE, &priv->regs->wrprot); |
| 333 | |
| 334 | return 0; |
| 335 | } |
| 336 | |
| 337 | static const struct dm_spi_ops mtk_qspi_ops = { |
| 338 | .claim_bus = mtk_qspi_claim_bus, |
| 339 | .release_bus = mtk_qspi_release_bus, |
| 340 | .xfer = mtk_qspi_xfer, |
| 341 | .set_speed = mtk_qspi_set_speed, |
| 342 | .set_mode = mtk_qspi_set_mode, |
| 343 | }; |
| 344 | |
| 345 | static const struct udevice_id mtk_qspi_ids[] = { |
| 346 | { .compatible = "mediatek,mt7629-qspi" }, |
| 347 | { } |
| 348 | }; |
| 349 | |
| 350 | U_BOOT_DRIVER(mtk_qspi) = { |
| 351 | .name = "mtk_qspi", |
| 352 | .id = UCLASS_SPI, |
| 353 | .of_match = mtk_qspi_ids, |
| 354 | .ops = &mtk_qspi_ops, |
| 355 | .ofdata_to_platdata = mtk_qspi_ofdata_to_platdata, |
| 356 | .platdata_auto_alloc_size = sizeof(struct mtk_qspi_platdata), |
| 357 | .priv_auto_alloc_size = sizeof(struct mtk_qspi_priv), |
| 358 | .probe = mtk_qspi_probe, |
| 359 | }; |