blob: d0c033aece0fb7986a614cef5a9176dc6bca2f44 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Simon Glass1a736612016-02-29 15:25:39 -07002/*
3 * (C) Copyright 2000-2004
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
Simon Glass1a736612016-02-29 15:25:39 -07005 */
6
7#ifndef BLK_H
8#define BLK_H
9
Peter Jonesff98cb92017-09-13 18:05:25 -040010#include <efi.h>
11
Simon Glass1a736612016-02-29 15:25:39 -070012#ifdef CONFIG_SYS_64BIT_LBA
13typedef uint64_t lbaint_t;
14#define LBAFlength "ll"
15#else
16typedef ulong lbaint_t;
17#define LBAFlength "l"
18#endif
19#define LBAF "%" LBAFlength "x"
20#define LBAFU "%" LBAFlength "u"
21
22/* Interface types: */
Simon Glass5ec4f1a2016-02-29 15:25:40 -070023enum if_type {
24 IF_TYPE_UNKNOWN = 0,
25 IF_TYPE_IDE,
26 IF_TYPE_SCSI,
27 IF_TYPE_ATAPI,
28 IF_TYPE_USB,
29 IF_TYPE_DOC,
30 IF_TYPE_MMC,
31 IF_TYPE_SD,
32 IF_TYPE_SATA,
33 IF_TYPE_HOST,
Zhikang Zhangffab6942017-08-03 02:30:56 -070034 IF_TYPE_NVME,
Heinrich Schuchardt05ef48a2018-01-21 19:29:30 +010035 IF_TYPE_EFI,
Tuomas Tynkkynen4ad54ec2018-10-15 02:21:10 -070036 IF_TYPE_VIRTIO,
Simon Glass5ec4f1a2016-02-29 15:25:40 -070037
38 IF_TYPE_COUNT, /* Number of interface types */
39};
Simon Glass1a736612016-02-29 15:25:39 -070040
Bin Mengeb81b1a2017-09-10 05:12:50 -070041#define BLK_VEN_SIZE 40
42#define BLK_PRD_SIZE 20
43#define BLK_REV_SIZE 8
44
Simon Glass09d71aa2016-02-29 15:25:55 -070045/*
Peter Jonesff98cb92017-09-13 18:05:25 -040046 * Identifies the partition table type (ie. MBR vs GPT GUID) signature
47 */
48enum sig_type {
49 SIG_TYPE_NONE,
50 SIG_TYPE_MBR,
51 SIG_TYPE_GUID,
52
53 SIG_TYPE_COUNT /* Number of signature types */
54};
55
56/*
Simon Glass09d71aa2016-02-29 15:25:55 -070057 * With driver model (CONFIG_BLK) this is uclass platform data, accessible
58 * with dev_get_uclass_platdata(dev)
59 */
Simon Glass1a736612016-02-29 15:25:39 -070060struct blk_desc {
Simon Glass09d71aa2016-02-29 15:25:55 -070061 /*
62 * TODO: With driver model we should be able to use the parent
63 * device's uclass instead.
64 */
Simon Glass5ec4f1a2016-02-29 15:25:40 -070065 enum if_type if_type; /* type of the interface */
Simon Glassbcce53d2016-02-29 15:25:51 -070066 int devnum; /* device number */
Simon Glass1a736612016-02-29 15:25:39 -070067 unsigned char part_type; /* partition type */
68 unsigned char target; /* target SCSI ID */
69 unsigned char lun; /* target LUN */
70 unsigned char hwpart; /* HW partition, e.g. for eMMC */
71 unsigned char type; /* device type */
72 unsigned char removable; /* removable device */
73#ifdef CONFIG_LBA48
74 /* device can use 48bit addr (ATA/ATAPI v7) */
75 unsigned char lba48;
76#endif
77 lbaint_t lba; /* number of blocks */
78 unsigned long blksz; /* block size */
79 int log2blksz; /* for convenience: log2(blksz) */
Bin Mengeb81b1a2017-09-10 05:12:50 -070080 char vendor[BLK_VEN_SIZE + 1]; /* device vendor string */
81 char product[BLK_PRD_SIZE + 1]; /* device product number */
82 char revision[BLK_REV_SIZE + 1]; /* firmware revision */
Peter Jonesff98cb92017-09-13 18:05:25 -040083 enum sig_type sig_type; /* Partition table signature type */
84 union {
85 uint32_t mbr_sig; /* MBR integer signature */
86 efi_guid_t guid_sig; /* GPT GUID Signature */
87 };
Simon Glassc4d660d2017-07-04 13:31:19 -060088#if CONFIG_IS_ENABLED(BLK)
Simon Glassb6694a32016-05-01 13:52:33 -060089 /*
90 * For now we have a few functions which take struct blk_desc as a
91 * parameter. This field allows them to look up the associated
92 * device. Once these functions are removed we can drop this field.
93 */
Simon Glass09d71aa2016-02-29 15:25:55 -070094 struct udevice *bdev;
95#else
Simon Glass1a736612016-02-29 15:25:39 -070096 unsigned long (*block_read)(struct blk_desc *block_dev,
97 lbaint_t start,
98 lbaint_t blkcnt,
99 void *buffer);
100 unsigned long (*block_write)(struct blk_desc *block_dev,
101 lbaint_t start,
102 lbaint_t blkcnt,
103 const void *buffer);
104 unsigned long (*block_erase)(struct blk_desc *block_dev,
105 lbaint_t start,
106 lbaint_t blkcnt);
107 void *priv; /* driver private struct pointer */
Simon Glass09d71aa2016-02-29 15:25:55 -0700108#endif
Simon Glass1a736612016-02-29 15:25:39 -0700109};
110
111#define BLOCK_CNT(size, blk_desc) (PAD_COUNT(size, blk_desc->blksz))
112#define PAD_TO_BLOCKSIZE(size, blk_desc) \
113 (PAD_SIZE(size, blk_desc->blksz))
114
Adam Ford6fef62c2018-06-11 17:17:48 -0500115#if CONFIG_IS_ENABLED(BLOCK_CACHE)
Eric Nelsone40cf342016-03-28 10:05:44 -0700116/**
117 * blkcache_read() - attempt to read a set of blocks from cache
118 *
119 * @param iftype - IF_TYPE_x for type of device
120 * @param dev - device index of particular type
121 * @param start - starting block number
122 * @param blkcnt - number of blocks to read
123 * @param blksz - size in bytes of each block
124 * @param buf - buffer to contain cached data
125 *
126 * @return - '1' if block returned from cache, '0' otherwise.
127 */
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700128int blkcache_read(int iftype, int dev,
129 lbaint_t start, lbaint_t blkcnt,
130 unsigned long blksz, void *buffer);
Eric Nelsone40cf342016-03-28 10:05:44 -0700131
132/**
133 * blkcache_fill() - make data read from a block device available
134 * to the block cache
135 *
136 * @param iftype - IF_TYPE_x for type of device
137 * @param dev - device index of particular type
138 * @param start - starting block number
139 * @param blkcnt - number of blocks available
140 * @param blksz - size in bytes of each block
141 * @param buf - buffer containing data to cache
142 *
143 */
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700144void blkcache_fill(int iftype, int dev,
145 lbaint_t start, lbaint_t blkcnt,
146 unsigned long blksz, void const *buffer);
Eric Nelsone40cf342016-03-28 10:05:44 -0700147
148/**
149 * blkcache_invalidate() - discard the cache for a set of blocks
150 * because of a write or device (re)initialization.
151 *
152 * @param iftype - IF_TYPE_x for type of device
153 * @param dev - device index of particular type
154 */
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700155void blkcache_invalidate(int iftype, int dev);
Eric Nelsone40cf342016-03-28 10:05:44 -0700156
157/**
158 * blkcache_configure() - configure block cache
159 *
160 * @param blocks - maximum blocks per entry
161 * @param entries - maximum entries in cache
162 */
163void blkcache_configure(unsigned blocks, unsigned entries);
164
165/*
166 * statistics of the block cache
167 */
168struct block_cache_stats {
169 unsigned hits;
170 unsigned misses;
171 unsigned entries; /* current entry count */
172 unsigned max_blocks_per_entry;
173 unsigned max_entries;
174};
175
176/**
177 * get_blkcache_stats() - return statistics and reset
178 *
179 * @param stats - statistics are copied here
180 */
181void blkcache_stats(struct block_cache_stats *stats);
182
183#else
184
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700185static inline int blkcache_read(int iftype, int dev,
186 lbaint_t start, lbaint_t blkcnt,
187 unsigned long blksz, void *buffer)
Eric Nelsone40cf342016-03-28 10:05:44 -0700188{
189 return 0;
190}
191
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700192static inline void blkcache_fill(int iftype, int dev,
193 lbaint_t start, lbaint_t blkcnt,
194 unsigned long blksz, void const *buffer) {}
Eric Nelsone40cf342016-03-28 10:05:44 -0700195
Eric Nelsonc8e4d2a2016-04-02 07:37:14 -0700196static inline void blkcache_invalidate(int iftype, int dev) {}
Eric Nelsone40cf342016-03-28 10:05:44 -0700197
198#endif
199
Simon Glassc4d660d2017-07-04 13:31:19 -0600200#if CONFIG_IS_ENABLED(BLK)
Simon Glass09d71aa2016-02-29 15:25:55 -0700201struct udevice;
202
203/* Operations on block devices */
204struct blk_ops {
205 /**
206 * read() - read from a block device
207 *
208 * @dev: Device to read from
209 * @start: Start block number to read (0=first)
210 * @blkcnt: Number of blocks to read
211 * @buffer: Destination buffer for data read
212 * @return number of blocks read, or -ve error number (see the
213 * IS_ERR_VALUE() macro
214 */
215 unsigned long (*read)(struct udevice *dev, lbaint_t start,
216 lbaint_t blkcnt, void *buffer);
217
218 /**
219 * write() - write to a block device
220 *
221 * @dev: Device to write to
222 * @start: Start block number to write (0=first)
223 * @blkcnt: Number of blocks to write
224 * @buffer: Source buffer for data to write
225 * @return number of blocks written, or -ve error number (see the
226 * IS_ERR_VALUE() macro
227 */
228 unsigned long (*write)(struct udevice *dev, lbaint_t start,
229 lbaint_t blkcnt, const void *buffer);
230
231 /**
232 * erase() - erase a section of a block device
233 *
234 * @dev: Device to (partially) erase
235 * @start: Start block number to erase (0=first)
236 * @blkcnt: Number of blocks to erase
237 * @return number of blocks erased, or -ve error number (see the
238 * IS_ERR_VALUE() macro
239 */
240 unsigned long (*erase)(struct udevice *dev, lbaint_t start,
241 lbaint_t blkcnt);
Simon Glasscd0fb552016-05-01 13:52:30 -0600242
243 /**
244 * select_hwpart() - select a particular hardware partition
245 *
246 * Some devices (e.g. MMC) can support partitioning at the hardware
247 * level. This is quite separate from the normal idea of
248 * software-based partitions. MMC hardware partitions must be
249 * explicitly selected. Once selected only the region of the device
250 * covered by that partition is accessible.
251 *
252 * The MMC standard provides for two boot partitions (numbered 1 and 2),
253 * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
254 *
255 * @desc: Block device to update
256 * @hwpart: Hardware partition number to select. 0 means the raw
257 * device, 1 is the first partition, 2 is the second, etc.
258 * @return 0 if OK, -ve on error
259 */
260 int (*select_hwpart)(struct udevice *dev, int hwpart);
Simon Glass09d71aa2016-02-29 15:25:55 -0700261};
262
263#define blk_get_ops(dev) ((struct blk_ops *)(dev)->driver->ops)
264
265/*
266 * These functions should take struct udevice instead of struct blk_desc,
267 * but this is convenient for migration to driver model. Add a 'd' prefix
268 * to the function operations, so that blk_read(), etc. can be reserved for
269 * functions with the correct arguments.
270 */
271unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
272 lbaint_t blkcnt, void *buffer);
273unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
274 lbaint_t blkcnt, const void *buffer);
275unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
276 lbaint_t blkcnt);
277
278/**
Simon Glass61392812017-04-23 20:02:05 -0600279 * blk_find_device() - Find a block device
280 *
281 * This function does not activate the device. The device will be returned
282 * whether or not it is activated.
283 *
284 * @if_type: Interface type (enum if_type_t)
285 * @devnum: Device number (specific to each interface type)
286 * @devp: the device, if found
287 * @return 0 if found, -ENODEV if no device found, or other -ve error value
288 */
289int blk_find_device(int if_type, int devnum, struct udevice **devp);
290
291/**
Simon Glass09d71aa2016-02-29 15:25:55 -0700292 * blk_get_device() - Find and probe a block device ready for use
293 *
294 * @if_type: Interface type (enum if_type_t)
295 * @devnum: Device number (specific to each interface type)
296 * @devp: the device, if found
Simon Glass61392812017-04-23 20:02:05 -0600297 * @return 0 if found, -ENODEV if no device found, or other -ve error value
Simon Glass09d71aa2016-02-29 15:25:55 -0700298 */
299int blk_get_device(int if_type, int devnum, struct udevice **devp);
300
301/**
302 * blk_first_device() - Find the first device for a given interface
303 *
304 * The device is probed ready for use
305 *
306 * @devnum: Device number (specific to each interface type)
307 * @devp: the device, if found
308 * @return 0 if found, -ENODEV if no device, or other -ve error value
309 */
310int blk_first_device(int if_type, struct udevice **devp);
311
312/**
313 * blk_next_device() - Find the next device for a given interface
314 *
315 * This can be called repeatedly after blk_first_device() to iterate through
316 * all devices of the given interface type.
317 *
318 * The device is probed ready for use
319 *
320 * @devp: On entry, the previous device returned. On exit, the next
321 * device, if found
322 * @return 0 if found, -ENODEV if no device, or other -ve error value
323 */
324int blk_next_device(struct udevice **devp);
325
326/**
327 * blk_create_device() - Create a new block device
328 *
329 * @parent: Parent of the new device
330 * @drv_name: Driver name to use for the block device
331 * @name: Name for the device
332 * @if_type: Interface type (enum if_type_t)
Simon Glass52138fd2016-05-01 11:36:28 -0600333 * @devnum: Device number, specific to the interface type, or -1 to
334 * allocate the next available number
Simon Glass09d71aa2016-02-29 15:25:55 -0700335 * @blksz: Block size of the device in bytes (typically 512)
Jean-Jacques Hiblot5fe77022017-06-09 16:45:18 +0200336 * @lba: Total number of blocks of the device
Simon Glass09d71aa2016-02-29 15:25:55 -0700337 * @devp: the new device (which has not been probed)
338 */
339int blk_create_device(struct udevice *parent, const char *drv_name,
340 const char *name, int if_type, int devnum, int blksz,
Jean-Jacques Hiblot5fe77022017-06-09 16:45:18 +0200341 lbaint_t lba, struct udevice **devp);
Simon Glass09d71aa2016-02-29 15:25:55 -0700342
343/**
Simon Glass9107c972016-05-01 11:36:29 -0600344 * blk_create_devicef() - Create a new named block device
345 *
346 * @parent: Parent of the new device
347 * @drv_name: Driver name to use for the block device
348 * @name: Name for the device (parent name is prepended)
349 * @if_type: Interface type (enum if_type_t)
350 * @devnum: Device number, specific to the interface type, or -1 to
351 * allocate the next available number
352 * @blksz: Block size of the device in bytes (typically 512)
Jean-Jacques Hiblot5fe77022017-06-09 16:45:18 +0200353 * @lba: Total number of blocks of the device
Simon Glass9107c972016-05-01 11:36:29 -0600354 * @devp: the new device (which has not been probed)
355 */
356int blk_create_devicef(struct udevice *parent, const char *drv_name,
357 const char *name, int if_type, int devnum, int blksz,
Jean-Jacques Hiblot5fe77022017-06-09 16:45:18 +0200358 lbaint_t lba, struct udevice **devp);
Simon Glass9107c972016-05-01 11:36:29 -0600359
360/**
Simon Glass09d71aa2016-02-29 15:25:55 -0700361 * blk_unbind_all() - Unbind all device of the given interface type
362 *
363 * The devices are removed and then unbound.
364 *
365 * @if_type: Interface type to unbind
366 * @return 0 if OK, -ve on error
367 */
368int blk_unbind_all(int if_type);
369
Simon Glass52138fd2016-05-01 11:36:28 -0600370/**
371 * blk_find_max_devnum() - find the maximum device number for an interface type
372 *
373 * Finds the last allocated device number for an interface type @if_type. The
374 * next number is safe to use for a newly allocated device.
375 *
376 * @if_type: Interface type to scan
377 * @return maximum device number found, or -ENODEV if none, or other -ve on
378 * error
379 */
380int blk_find_max_devnum(enum if_type if_type);
381
Simon Glasscd0fb552016-05-01 13:52:30 -0600382/**
Bin Mengc879eeb2018-10-15 02:21:09 -0700383 * blk_next_free_devnum() - get the next device number for an interface type
384 *
385 * Finds the next number that is safe to use for a newly allocated device for
386 * an interface type @if_type.
387 *
388 * @if_type: Interface type to scan
389 * @return next device number safe to use, or -ve on error
390 */
391int blk_next_free_devnum(enum if_type if_type);
392
393/**
Simon Glasscd0fb552016-05-01 13:52:30 -0600394 * blk_select_hwpart() - select a hardware partition
395 *
396 * Select a hardware partition if the device supports it (typically MMC does)
397 *
398 * @dev: Device to update
399 * @hwpart: Partition number to select
400 * @return 0 if OK, -ve on error
401 */
402int blk_select_hwpart(struct udevice *dev, int hwpart);
403
Tom Rini4bdb49a2017-06-10 10:01:05 -0400404/**
405 * blk_get_from_parent() - obtain a block device by looking up its parent
406 *
407 * All devices with
408 */
409int blk_get_from_parent(struct udevice *parent, struct udevice **devp);
410
Tien Fong Cheebc53d262018-07-06 16:26:36 +0800411/**
412 * blk_get_by_device() - Get the block device descriptor for the given device
413 * @dev: Instance of a storage device
414 *
415 * Return: With block device descriptor on success , NULL if there is no such
416 * block device.
417 */
418struct blk_desc *blk_get_by_device(struct udevice *dev);
419
Simon Glass09d71aa2016-02-29 15:25:55 -0700420#else
421#include <errno.h>
Simon Glass2a981dc2016-02-29 15:25:52 -0700422/*
423 * These functions should take struct udevice instead of struct blk_desc,
424 * but this is convenient for migration to driver model. Add a 'd' prefix
425 * to the function operations, so that blk_read(), etc. can be reserved for
426 * functions with the correct arguments.
427 */
428static inline ulong blk_dread(struct blk_desc *block_dev, lbaint_t start,
429 lbaint_t blkcnt, void *buffer)
430{
Eric Nelsone40cf342016-03-28 10:05:44 -0700431 ulong blks_read;
432 if (blkcache_read(block_dev->if_type, block_dev->devnum,
433 start, blkcnt, block_dev->blksz, buffer))
434 return blkcnt;
435
Simon Glass2a981dc2016-02-29 15:25:52 -0700436 /*
437 * We could check if block_read is NULL and return -ENOSYS. But this
438 * bloats the code slightly (cause some board to fail to build), and
439 * it would be an error to try an operation that does not exist.
440 */
Eric Nelsone40cf342016-03-28 10:05:44 -0700441 blks_read = block_dev->block_read(block_dev, start, blkcnt, buffer);
442 if (blks_read == blkcnt)
443 blkcache_fill(block_dev->if_type, block_dev->devnum,
444 start, blkcnt, block_dev->blksz, buffer);
445
446 return blks_read;
Simon Glass2a981dc2016-02-29 15:25:52 -0700447}
448
449static inline ulong blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
450 lbaint_t blkcnt, const void *buffer)
451{
Eric Nelsone40cf342016-03-28 10:05:44 -0700452 blkcache_invalidate(block_dev->if_type, block_dev->devnum);
Simon Glass2a981dc2016-02-29 15:25:52 -0700453 return block_dev->block_write(block_dev, start, blkcnt, buffer);
454}
455
456static inline ulong blk_derase(struct blk_desc *block_dev, lbaint_t start,
457 lbaint_t blkcnt)
458{
Eric Nelsone40cf342016-03-28 10:05:44 -0700459 blkcache_invalidate(block_dev->if_type, block_dev->devnum);
Simon Glass2a981dc2016-02-29 15:25:52 -0700460 return block_dev->block_erase(block_dev, start, blkcnt);
461}
Simon Glass6eef6ea2016-05-01 11:36:03 -0600462
463/**
464 * struct blk_driver - Driver for block interface types
465 *
466 * This provides access to the block devices for each interface type. One
467 * driver should be provided using U_BOOT_LEGACY_BLK() for each interface
468 * type that is to be supported.
469 *
470 * @if_typename: Interface type name
471 * @if_type: Interface type
472 * @max_devs: Maximum number of devices supported
473 * @desc: Pointer to list of devices for this interface type,
474 * or NULL to use @get_dev() instead
475 */
476struct blk_driver {
477 const char *if_typename;
478 enum if_type if_type;
479 int max_devs;
480 struct blk_desc *desc;
481 /**
482 * get_dev() - get a pointer to a block device given its number
483 *
484 * Each interface allocates its own devices and typically
485 * struct blk_desc is contained with the interface's data structure.
486 * There is no global numbering for block devices. This method allows
487 * the device for an interface type to be obtained when @desc is NULL.
488 *
489 * @devnum: Device number (0 for first device on that interface,
490 * 1 for second, etc.
491 * @descp: Returns pointer to the block device on success
492 * @return 0 if OK, -ve on error
493 */
494 int (*get_dev)(int devnum, struct blk_desc **descp);
495
496 /**
497 * select_hwpart() - Select a hardware partition
498 *
499 * Some devices (e.g. MMC) can support partitioning at the hardware
500 * level. This is quite separate from the normal idea of
501 * software-based partitions. MMC hardware partitions must be
502 * explicitly selected. Once selected only the region of the device
503 * covered by that partition is accessible.
504 *
505 * The MMC standard provides for two boot partitions (numbered 1 and 2),
506 * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
507 * Partition 0 is the main user-data partition.
508 *
509 * @desc: Block device descriptor
510 * @hwpart: Hardware partition number to select. 0 means the main
511 * user-data partition, 1 is the first partition, 2 is
512 * the second, etc.
513 * @return 0 if OK, other value for an error
514 */
515 int (*select_hwpart)(struct blk_desc *desc, int hwpart);
516};
517
518/*
519 * Declare a new U-Boot legacy block driver. New drivers should use driver
520 * model (UCLASS_BLK).
521 */
522#define U_BOOT_LEGACY_BLK(__name) \
523 ll_entry_declare(struct blk_driver, __name, blk_driver)
524
525struct blk_driver *blk_driver_lookup_type(int if_type);
526
Simon Glass09d71aa2016-02-29 15:25:55 -0700527#endif /* !CONFIG_BLK */
Simon Glass2a981dc2016-02-29 15:25:52 -0700528
Simon Glass6eef6ea2016-05-01 11:36:03 -0600529/**
530 * blk_get_devnum_by_typename() - Get a block device by type and number
531 *
532 * This looks through the available block devices of the given type, returning
533 * the one with the given @devnum.
534 *
535 * @if_type: Block device type
536 * @devnum: Device number
537 * @return point to block device descriptor, or NULL if not found
538 */
539struct blk_desc *blk_get_devnum_by_type(enum if_type if_type, int devnum);
540
541/**
542 * blk_get_devnum_by_type() - Get a block device by type name, and number
543 *
544 * This looks up the block device type based on @if_typename, then calls
545 * blk_get_devnum_by_type().
546 *
547 * @if_typename: Block device type name
548 * @devnum: Device number
549 * @return point to block device descriptor, or NULL if not found
550 */
551struct blk_desc *blk_get_devnum_by_typename(const char *if_typename,
552 int devnum);
553
554/**
555 * blk_dselect_hwpart() - select a hardware partition
556 *
557 * This selects a hardware partition (such as is supported by MMC). The block
558 * device size may change as this effectively points the block device to a
559 * partition at the hardware level. See the select_hwpart() method above.
560 *
561 * @desc: Block device descriptor for the device to select
562 * @hwpart: Partition number to select
563 * @return 0 if OK, -ve on error
564 */
565int blk_dselect_hwpart(struct blk_desc *desc, int hwpart);
566
567/**
568 * blk_list_part() - list the partitions for block devices of a given type
569 *
570 * This looks up the partition type for each block device of type @if_type,
571 * then displays a list of partitions.
572 *
573 * @if_type: Block device type
574 * @return 0 if OK, -ENODEV if there is none of that type
575 */
576int blk_list_part(enum if_type if_type);
577
578/**
579 * blk_list_devices() - list the block devices of a given type
580 *
581 * This lists each block device of the type @if_type, showing the capacity
582 * as well as type-specific information.
583 *
584 * @if_type: Block device type
585 */
586void blk_list_devices(enum if_type if_type);
587
588/**
589 * blk_show_device() - show information about a given block device
590 *
591 * This shows the block device capacity as well as type-specific information.
592 *
593 * @if_type: Block device type
594 * @devnum: Device number
595 * @return 0 if OK, -ENODEV for invalid device number
596 */
597int blk_show_device(enum if_type if_type, int devnum);
598
599/**
600 * blk_print_device_num() - show information about a given block device
601 *
602 * This is similar to blk_show_device() but returns an error if the block
603 * device type is unknown.
604 *
605 * @if_type: Block device type
606 * @devnum: Device number
607 * @return 0 if OK, -ENODEV for invalid device number, -ENOENT if the block
608 * device is not connected
609 */
610int blk_print_device_num(enum if_type if_type, int devnum);
611
612/**
613 * blk_print_part_devnum() - print the partition information for a device
614 *
615 * @if_type: Block device type
616 * @devnum: Device number
617 * @return 0 if OK, -ENOENT if the block device is not connected, -ENOSYS if
618 * the interface type is not supported, other -ve on other error
619 */
620int blk_print_part_devnum(enum if_type if_type, int devnum);
621
622/**
623 * blk_read_devnum() - read blocks from a device
624 *
625 * @if_type: Block device type
626 * @devnum: Device number
627 * @blkcnt: Number of blocks to read
628 * @buffer: Address to write data to
629 * @return number of blocks read, or -ve error number on error
630 */
631ulong blk_read_devnum(enum if_type if_type, int devnum, lbaint_t start,
632 lbaint_t blkcnt, void *buffer);
633
634/**
635 * blk_write_devnum() - write blocks to a device
636 *
637 * @if_type: Block device type
638 * @devnum: Device number
639 * @blkcnt: Number of blocks to write
640 * @buffer: Address to read data from
641 * @return number of blocks written, or -ve error number on error
642 */
643ulong blk_write_devnum(enum if_type if_type, int devnum, lbaint_t start,
644 lbaint_t blkcnt, const void *buffer);
645
646/**
647 * blk_select_hwpart_devnum() - select a hardware partition
648 *
649 * This is similar to blk_dselect_hwpart() but it looks up the interface and
650 * device number.
651 *
652 * @if_type: Block device type
653 * @devnum: Device number
654 * @hwpart: Partition number to select
655 * @return 0 if OK, -ve on error
656 */
657int blk_select_hwpart_devnum(enum if_type if_type, int devnum, int hwpart);
658
Simon Glass6faa4ed2017-07-29 11:34:53 -0600659/**
660 * blk_get_if_type_name() - Get the name of an interface type
661 *
662 * @if_type: Interface type to check
663 * @return name of interface, or NULL if none
664 */
665const char *blk_get_if_type_name(enum if_type if_type);
666
Simon Glass4395f662017-07-29 11:34:54 -0600667/**
668 * blk_common_cmd() - handle common commands with block devices
669 *
670 * @args: Number of arguments to the command (argv[0] is the command itself)
671 * @argv: Command arguments
672 * @if_type: Interface type
673 * @cur_devnump: Current device number for this interface type
674 * @return 0 if OK, CMD_RET_ERROR on error
675 */
676int blk_common_cmd(int argc, char * const argv[], enum if_type if_type,
677 int *cur_devnump);
678
Simon Glass1a736612016-02-29 15:25:39 -0700679#endif