Marek Vasut | 1995373 | 2020-01-24 18:39:16 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (C) 2019 Marek Vasut <marex@denx.de> |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/clock/stm32mp1-clksrc.h> |
| 7 | #include "stm32mp157-u-boot.dtsi" |
| 8 | #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" |
| 9 | |
| 10 | / { |
| 11 | aliases { |
| 12 | i2c1 = &i2c2; |
| 13 | i2c3 = &i2c4; |
| 14 | i2c4 = &i2c5; |
| 15 | mmc0 = &sdmmc1; |
| 16 | mmc1 = &sdmmc2; |
| 17 | spi0 = &qspi; |
| 18 | usb0 = &usbotg_hs; |
| 19 | }; |
| 20 | |
| 21 | config { |
| 22 | u-boot,boot-led = "heartbeat"; |
| 23 | u-boot,error-led = "error"; |
| 24 | st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; |
| 25 | st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; |
| 26 | }; |
| 27 | |
| 28 | led { |
| 29 | red { |
| 30 | label = "error"; |
| 31 | gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; |
| 32 | default-state = "off"; |
| 33 | status = "okay"; |
| 34 | }; |
| 35 | |
| 36 | blue { |
| 37 | default-state = "on"; |
| 38 | }; |
| 39 | }; |
| 40 | }; |
| 41 | |
| 42 | &i2c4 { |
| 43 | u-boot,dm-pre-reloc; |
| 44 | }; |
| 45 | |
| 46 | &i2c4_pins_a { |
| 47 | u-boot,dm-pre-reloc; |
| 48 | pins { |
| 49 | u-boot,dm-pre-reloc; |
| 50 | }; |
| 51 | }; |
| 52 | |
| 53 | &pmic { |
| 54 | u-boot,dm-pre-reloc; |
| 55 | }; |
| 56 | |
| 57 | &flash0 { |
| 58 | u-boot,dm-spl; |
| 59 | }; |
| 60 | |
| 61 | &qspi { |
| 62 | u-boot,dm-spl; |
| 63 | }; |
| 64 | |
| 65 | &qspi_clk_pins_a { |
| 66 | u-boot,dm-spl; |
| 67 | pins { |
| 68 | u-boot,dm-spl; |
| 69 | }; |
| 70 | }; |
| 71 | |
| 72 | &qspi_bk1_pins_a { |
| 73 | u-boot,dm-spl; |
| 74 | pins1 { |
| 75 | u-boot,dm-spl; |
| 76 | }; |
| 77 | pins2 { |
| 78 | u-boot,dm-spl; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | &qspi_bk2_pins_a { |
| 83 | u-boot,dm-spl; |
| 84 | pins1 { |
| 85 | u-boot,dm-spl; |
| 86 | }; |
| 87 | pins2 { |
| 88 | u-boot,dm-spl; |
| 89 | }; |
| 90 | }; |
| 91 | |
| 92 | &rcc { |
| 93 | st,clksrc = < |
| 94 | CLK_MPU_PLL1P |
| 95 | CLK_AXI_PLL2P |
| 96 | CLK_MCU_PLL3P |
| 97 | CLK_PLL12_HSE |
| 98 | CLK_PLL3_HSE |
| 99 | CLK_PLL4_HSE |
| 100 | CLK_RTC_LSE |
| 101 | CLK_MCO1_DISABLED |
| 102 | CLK_MCO2_DISABLED |
| 103 | >; |
| 104 | |
| 105 | st,clkdiv = < |
| 106 | 1 /*MPU*/ |
| 107 | 0 /*AXI*/ |
| 108 | 0 /*MCU*/ |
| 109 | 1 /*APB1*/ |
| 110 | 1 /*APB2*/ |
| 111 | 1 /*APB3*/ |
| 112 | 1 /*APB4*/ |
| 113 | 2 /*APB5*/ |
| 114 | 23 /*RTC*/ |
| 115 | 0 /*MCO1*/ |
| 116 | 0 /*MCO2*/ |
| 117 | >; |
| 118 | |
| 119 | st,pkcs = < |
| 120 | CLK_CKPER_HSE |
| 121 | CLK_FMC_ACLK |
| 122 | CLK_QSPI_ACLK |
| 123 | CLK_ETH_PLL4P |
| 124 | CLK_SDMMC12_PLL4P |
| 125 | CLK_DSI_DSIPLL |
| 126 | CLK_STGEN_HSE |
| 127 | CLK_USBPHY_HSE |
| 128 | CLK_SPI2S1_PLL3Q |
| 129 | CLK_SPI2S23_PLL3Q |
| 130 | CLK_SPI45_HSI |
| 131 | CLK_SPI6_HSI |
| 132 | CLK_I2C46_HSI |
| 133 | CLK_SDMMC3_PLL4P |
| 134 | CLK_USBO_USBPHY |
| 135 | CLK_ADC_CKPER |
| 136 | CLK_CEC_LSE |
| 137 | CLK_I2C12_HSI |
| 138 | CLK_I2C35_HSI |
| 139 | CLK_UART1_HSI |
| 140 | CLK_UART24_HSI |
| 141 | CLK_UART35_HSI |
| 142 | CLK_UART6_HSI |
| 143 | CLK_UART78_HSI |
| 144 | CLK_SPDIF_PLL4P |
Antonio Borneo | db0cd2d | 2020-01-28 10:11:01 +0100 | [diff] [blame^] | 145 | CLK_FDCAN_PLL4R |
Marek Vasut | 1995373 | 2020-01-24 18:39:16 +0100 | [diff] [blame] | 146 | CLK_SAI1_PLL3Q |
| 147 | CLK_SAI2_PLL3Q |
| 148 | CLK_SAI3_PLL3Q |
| 149 | CLK_SAI4_PLL3Q |
| 150 | CLK_RNG1_LSI |
| 151 | CLK_RNG2_LSI |
| 152 | CLK_LPTIM1_PCLK1 |
| 153 | CLK_LPTIM23_PCLK3 |
| 154 | CLK_LPTIM45_LSE |
| 155 | >; |
| 156 | |
| 157 | /* VCO = 1300.0 MHz => P = 650 (CPU) */ |
| 158 | pll1: st,pll@0 { |
| 159 | cfg = < 2 80 0 0 0 PQR(1,0,0) >; |
| 160 | frac = < 0x800 >; |
| 161 | u-boot,dm-pre-reloc; |
| 162 | }; |
| 163 | |
| 164 | /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ |
| 165 | pll2: st,pll@1 { |
| 166 | cfg = < 2 65 1 0 0 PQR(1,1,1) >; |
| 167 | frac = < 0x1400 >; |
| 168 | u-boot,dm-pre-reloc; |
| 169 | }; |
| 170 | |
| 171 | /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ |
| 172 | pll3: st,pll@2 { |
| 173 | cfg = < 1 33 1 16 36 PQR(1,1,1) >; |
| 174 | frac = < 0x1a04 >; |
| 175 | u-boot,dm-pre-reloc; |
| 176 | }; |
| 177 | |
| 178 | /* VCO = 600.0 MHz => P = 50, Q = 50, R = 50 */ |
| 179 | pll4: st,pll@3 { |
| 180 | cfg = < 1 49 11 11 11 PQR(1,1,1) >; |
| 181 | u-boot,dm-pre-reloc; |
| 182 | }; |
| 183 | }; |
| 184 | |
| 185 | &sdmmc1 { |
| 186 | u-boot,dm-spl; |
| 187 | }; |
| 188 | |
| 189 | &sdmmc1_b4_pins_a { |
| 190 | u-boot,dm-spl; |
| 191 | pins { |
| 192 | u-boot,dm-spl; |
| 193 | }; |
| 194 | }; |
| 195 | |
| 196 | &sdmmc1_dir_pins_a { |
| 197 | u-boot,dm-spl; |
| 198 | pins1 { |
| 199 | u-boot,dm-spl; |
| 200 | }; |
| 201 | pins2 { |
| 202 | u-boot,dm-spl; |
| 203 | }; |
| 204 | }; |
| 205 | |
| 206 | &sdmmc2 { |
| 207 | u-boot,dm-spl; |
| 208 | }; |
| 209 | |
| 210 | &sdmmc2_b4_pins_a { |
| 211 | u-boot,dm-spl; |
| 212 | pins { |
| 213 | u-boot,dm-spl; |
| 214 | }; |
| 215 | }; |
| 216 | |
| 217 | &sdmmc2_d47_pins_a { |
| 218 | u-boot,dm-spl; |
| 219 | pins { |
| 220 | u-boot,dm-spl; |
| 221 | }; |
| 222 | }; |
| 223 | |
| 224 | &uart4 { |
| 225 | u-boot,dm-pre-reloc; |
| 226 | }; |
| 227 | |
| 228 | &uart4_pins_a { |
| 229 | u-boot,dm-pre-reloc; |
| 230 | pins1 { |
| 231 | u-boot,dm-pre-reloc; |
| 232 | }; |
| 233 | pins2 { |
| 234 | u-boot,dm-pre-reloc; |
| 235 | /* pull-up on rx to avoid floating level */ |
| 236 | bias-pull-up; |
| 237 | }; |
| 238 | }; |