blob: 4febd322a4f0e848a073b97ebec3fa3dfcf6cbc9 [file] [log] [blame]
Wolfgang Denk7ce343e2006-10-09 00:48:57 +02001/*
2 * Copyright (C) 2006 Embedded Planet, LLC.
3 *
4 * U-Boot configuration for Embedded Planet EP82xxM boards.
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25#ifndef __CONFIG_H
26#define __CONFIG_H
27
28#define CONFIG_MPC8260
29#define CPU_ID_STR "MPC8270"
30
Wolfgang Denkf836e412006-10-20 16:12:14 +020031#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */
Wolfgang Denk7ce343e2006-10-09 00:48:57 +020032 /* 256MB SDRAM / 64MB FLASH */
33
34#undef DEBUG
35
36#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
37
38/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
39#define CONFIG_ENV_OVERWRITE
40
41/*
42 * Select serial console configuration
43 *
44 * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
45 * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
46 * for SCC).
47 */
48#define CONFIG_CONS_ON_SMC /* Console is on SMC */
49#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
50#undef CONFIG_CONS_NONE /* It's not on external UART */
51#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
52
53#define CFG_BCSR 0xFA000000
54
55/*
56 * Select ethernet configuration
57 *
58 * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
59 * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
60 * SCC, 1-3 for FCC)
61 *
62 * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
Jon Loeliger639221c2007-07-09 17:15:49 -050063 * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
64 * must be unset.
Wolfgang Denk7ce343e2006-10-09 00:48:57 +020065 */
66#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
67#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
68#undef CONFIG_ETHER_NONE /* No external Ethernet */
69
70#define CONFIG_NET_MULTI
71
72#define CONFIG_ETHER_ON_FCC2
73#define CONFIG_ETHER_ON_FCC3
74
75#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
76#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)
77#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
78#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
79
80#define CFG_CPMFCR_RAMTYPE 0
81#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
82
83#define CONFIG_MII /* MII PHY management */
84#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
85
86/*
87 * GPIO pins used for bit-banged MII communications
88 */
89#define MDIO_PORT 0 /* Not used - implemented in BCSR */
90#define MDIO_ACTIVE (*(vu_char *)(CFG_BCSR + 8) &= 0xFB)
91#define MDIO_TRISTATE (*(vu_char *)(CFG_BCSR + 8) |= 0x04)
92#define MDIO_READ (*(vu_char *)(CFG_BCSR + 8) & 1)
93
94#define MDIO(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \
95 else *(vu_char *)(CFG_BCSR + 8) &= 0xFE
96
97#define MDC(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \
98 else *(vu_char *)(CFG_BCSR + 8) &= 0xFD
99
100#define MIIDELAY udelay(1)
101
102
103#ifndef CONFIG_8260_CLKIN
104#define CONFIG_8260_CLKIN 66000000 /* in Hz */
105#endif
106
107#define CONFIG_BAUDRATE 115200
108
109#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
110
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200111
Jon Loeliger1bec3d32007-07-04 22:32:10 -0500112/*
Jon Loeliger80ff4f92007-07-10 09:29:01 -0500113 * BOOTP options
114 */
115#define CONFIG_BOOTP_BOOTFILESIZE
116#define CONFIG_BOOTP_BOOTPATH
117#define CONFIG_BOOTP_GATEWAY
118#define CONFIG_BOOTP_HOSTNAME
119
120
121/*
Jon Loeliger1bec3d32007-07-04 22:32:10 -0500122 * Command line configuration.
123 */
124#include <config_cmd_default.h>
125
126
127#define CONFIG_CMD_DHCP
128#define CONFIG_CMD_ECHO
129#define CONFIG_CMD_I2C
130#define CONFIG_CMD_IMMAP
131#define CONFIG_CMD_MII
132#define CONFIG_CMD_PING
133#define CONFIG_CMD_DATE
134#define CONFIG_CMD_DTT
135#define CONFIG_CMD_EEPROM
136#define CONFIG_CMD_PCI
137#define CONFIG_CMD_DIAG
138
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200139
140#define CONFIG_ETHADDR 00:10:EC:00:88:65
141#define CONFIG_HAS_ETH1
142#define CONFIG_ETH1ADDR 00:10:EC:80:88:65
143#define CONFIG_IPADDR 10.0.0.245
144#define CONFIG_HOSTNAME EP82xxM
145#define CONFIG_SERVERIP 10.0.0.26
146#define CONFIG_GATEWAYIP 10.0.0.1
147#define CONFIG_NETMASK 255.255.255.0
148#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
149#define CFG_ENV_IN_OWN_SECT 1
Wolfgang Denk8078f1a2006-10-28 02:28:02 +0200150#define CONFIG_AUTO_COMPLETE 1
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200151#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"
152
Jon Loeliger1bec3d32007-07-04 22:32:10 -0500153#if defined(CONFIG_CMD_KGDB)
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200154#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
155#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
156#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
157#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
158#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
159#endif
160
161#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
162#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
163
164/*
165 * Miscellaneous configurable options
166 */
167#define CFG_HUSH_PARSER
168#define CFG_PROMPT_HUSH_PS2 "> "
169#define CFG_LONGHELP /* undef to save memory */
170#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */
Jon Loeliger1bec3d32007-07-04 22:32:10 -0500171#if defined(CONFIG_CMD_KGDB)
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200172#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
173#else
174#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
175#endif
176#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
177#define CFG_MAXARGS 16 /* max number of command args */
178#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
179
180#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
181#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
182
183#define CFG_LOAD_ADDR 0x100000 /* default load address */
184
185#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
186
187#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
188
189/*-----------------------------------------------------------------------
190 * Environment
191 *----------------------------------------------------------------------*/
192/*
193 * Define here the location of the environment variables (FLASH or EEPROM).
194 * Note: DENX encourages to use redundant environment in FLASH.
195 */
196#if 1
197#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
198#else
199#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
200#endif
201
202/*-----------------------------------------------------------------------
203 * FLASH related
204 *----------------------------------------------------------------------*/
205#define CFG_FLASH_BASE 0xFC000000
206#define CFG_FLASH_CFI
207#define CFG_FLASH_CFI_DRIVER
208#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
209#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
210#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector in flinfo */
211
212#ifdef CFG_ENV_IS_IN_FLASH
213#define CFG_ENV_SECT_SIZE 0x20000
214#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
215#endif /* CFG_ENV_IS_IN_FLASH */
216
217/*-----------------------------------------------------------------------
218 * I2C
219 *----------------------------------------------------------------------*/
220/* EEPROM Configuration */
221#define CFG_EEPROM_SIZE 0x1000
222#define CFG_I2C_EEPROM_ADDR 0x54
223#define CFG_I2C_EEPROM_ADDR_LEN 1
224#define CFG_EEPROM_PAGE_WRITE_BITS 3
225#define CFG_EEPROM_PAGE_WRITE_ENABLE
226#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
227
228#ifdef CFG_ENV_IS_IN_EEPROM
229#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
230#define CFG_ENV_OFFSET 0x0
231#endif /* CFG_ENV_IS_IN_EEPROM */
232
233/* RTC Configuration */
234#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */
235#define CFG_I2C_RTC_ADDR 0x68
236#define CONFIG_M41T11_BASE_YEAR 1900
237
238/* I2C SYSMON (LM75) */
239#define CONFIG_DTT_LM75 1
240#define CONFIG_DTT_SENSORS {0}
241#define CFG_DTT_MAX_TEMP 70
242#define CFG_DTT_LOW_TEMP -30
243#define CFG_DTT_HYSTERESIS 3
244
245/*-----------------------------------------------------------------------
246 * NVRAM Configuration
247 *-----------------------------------------------------------------------
248 */
249#define CFG_NVRAM_BASE_ADDR 0xFA080000
250#define CFG_NVRAM_SIZE (128*1024)-16
251
252
253/*-----------------------------------------------------------------------
254 * PCI stuff
255 *-----------------------------------------------------------------------
256 */
257/* General PCI */
258#define CONFIG_PCI /* include pci support */
259#define CONFIG_PCI_PNP /* do pci plug-and-play */
260#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
261#define CONFIG_PCI_BOOTDELAY 0
262
263/* PCI Memory map (if different from default map */
264#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
265#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
266#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
267 PICMR_PREFETCH_EN)
268
269/*
270 * These are the windows that allow the CPU to access PCI address space.
271 * All three PCI master windows, which allow the CPU to access PCI
272 * prefetch, non prefetch, and IO space (see below), must all fit within
273 * these windows.
274 */
275
276/*
277 * Master window that allows the CPU to access PCI Memory (prefetch).
278 * This window will be setup with the second set of Outbound ATU registers
279 * in the bridge.
280 */
281
282#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
283#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
284#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
285#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
286#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
287
288/*
289 * Master window that allows the CPU to access PCI Memory (non-prefetch).
290 * This window will be setup with the second set of Outbound ATU registers
291 * in the bridge.
292 */
293
294#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
295#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
296#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
297#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
298#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
299
300/*
301 * Master window that allows the CPU to access PCI IO space.
302 * This window will be setup with the first set of Outbound ATU registers
303 * in the bridge.
304 */
305
306#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
307#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
308#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
309#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
310#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
311
312
313/* PCIBR0 - for PCI IO*/
314#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */
315#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
316/* PCIBR1 - prefetch and non-prefetch regions joined together */
317#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
318#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
319
320
321#define CFG_DIRECT_FLASH_TFTP
322
Jon Loeliger1bec3d32007-07-04 22:32:10 -0500323#if defined(CONFIG_CMD_JFFS2)
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200324#define CFG_JFFS2_FIRST_BANK 0
325#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
326#define CFG_JFFS2_FIRST_SECTOR 0
327#define CFG_JFFS2_LAST_SECTOR 62
328#define CFG_JFFS2_SORT_FRAGMENTS
329#define CFG_JFFS_CUSTOM_PART
Jon Loeliger80ff4f92007-07-10 09:29:01 -0500330#endif
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200331
Jon Loeliger1bec3d32007-07-04 22:32:10 -0500332#if defined(CONFIG_CMD_I2C)
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200333#define CONFIG_HARD_I2C 1 /* To enable I2C support */
334#define CFG_I2C_SPEED 100000 /* I2C speed */
335#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
Jon Loeliger80ff4f92007-07-10 09:29:01 -0500336#endif
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200337
338#define CFG_MONITOR_BASE TEXT_BASE
339#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
340#define CFG_RAMBOOT
341#endif
342
343#define CFG_MONITOR_LEN (512 << 10) /* Reserve 256KB for Monitor */
344
345#define CFG_DEFAULT_IMMR 0x00010000
346#define CFG_IMMR 0xF0000000
347
348#define CFG_INIT_RAM_ADDR CFG_IMMR
349#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
350#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
351#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
352#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
353
354
355/* Hard reset configuration word */
356#define CFG_HRCW_MASTER 0 /*0x1C800641*/ /* Not used - provided by CPLD */
357/* No slaves */
358#define CFG_HRCW_SLAVE1 0
359#define CFG_HRCW_SLAVE2 0
360#define CFG_HRCW_SLAVE3 0
361#define CFG_HRCW_SLAVE4 0
362#define CFG_HRCW_SLAVE5 0
363#define CFG_HRCW_SLAVE6 0
364#define CFG_HRCW_SLAVE7 0
365
366#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
367#define BOOTFLAG_WARM 0x02 /* Software reboot */
368
369#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
370#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
371
372#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
Jon Loeliger1bec3d32007-07-04 22:32:10 -0500373#if defined(CONFIG_CMD_KGDB)
Wolfgang Denk7ce343e2006-10-09 00:48:57 +0200374#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
375#endif
376
377#define CFG_HID0_INIT 0
378#define CFG_HID0_FINAL 0
379
380#define CFG_HID2 0
381
382#define CFG_SIUMCR 0x02610000
383#define CFG_SYPCR 0xFFFF0689
384#define CFG_BCR 0x8080E000
385#define CFG_SCCR 0x00000001
386
387#define CFG_RMR 0
388#define CFG_TMCNTSC 0x000000C3
389#define CFG_PISCR 0x00000083
390#define CFG_RCCR 0
391
392#define CFG_MPTPR 0x0A00
393#define CFG_PSDMR 0xC432246E
394#define CFG_PSRT 0x32
395
396#define CFG_SDRAM_BASE 0x00000000
397#define CFG_SDRAM_BR (CFG_SDRAM_BASE | 0x00000041)
398#define CFG_SDRAM_OR 0xF0002900
399
400#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801)
401#define CFG_OR0_PRELIM 0xFC000882
402#define CFG_BR4_PRELIM (CFG_BCSR | 0x00001001)
403#define CFG_OR4_PRELIM 0xFFF00050
404
405#define CFG_RESET_ADDRESS 0xFFF00100
406
407#endif /* __CONFIG_H */