blob: 9b83e21a1f70e5956154aadeed740cbb91d4d4c9 [file] [log] [blame]
Stefan Roeseb79316f2005-08-15 12:31:23 +02001/*
2 * (C) Copyright 2004 Sandburst Corporation
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23/************************************************************************
24 * METROBOX.h - configuration Sandburst MetroBox
25 ***********************************************************************/
26
27/*
28 * $Id: METROBOX.h,v 1.21 2005/06/03 15:05:25 tsawyer Exp $
29 *
30 *
31 * $Log: METROBOX.h,v $
32 * Revision 1.21 2005/06/03 15:05:25 tsawyer
33 * MB rev 2.0.3 KA rev 0.0.7. Add CONFIG_VERSION_VARIABLE, Add fakeled to MB
34 *
35 * Revision 1.20 2005/04/11 20:51:11 tsawyer
36 * fix ethernet
37 *
38 * Revision 1.19 2005/04/06 15:13:36 tsawyer
39 * Update appropriate files to coincide with u-boot 1.1.3
40 *
41 * Revision 1.18 2005/03/10 14:16:02 tsawyer
42 * add def'n for cis8201 short etch option.
43 *
44 * Revision 1.17 2005/03/09 19:49:51 tsawyer
45 * Remove KGDB to allow use of 2nd serial port
46 *
47 * Revision 1.16 2004/12/02 19:00:23 tsawyer
48 * Add misc_init_f to turn on i2c-1 and all four fans before sdram init
49 *
50 * Revision 1.15 2004/09/15 18:04:12 tsawyer
51 * add multiple serial port support
52 *
53 * Revision 1.14 2004/09/03 15:27:51 tsawyer
54 * All metrobox boards are at 66.66 sys clock
55 *
56 * Revision 1.13 2004/08/05 20:27:46 tsawyer
57 * Remove system ace definitions, add net console support
58 *
59 * Revision 1.12 2004/07/29 20:00:13 tsawyer
60 * Add i2c bus 1
61 *
62 * Revision 1.11 2004/07/21 13:44:18 tsawyer
63 * SystemACE is out, CF direct to local bus is in
64 *
65 * Revision 1.10 2004/06/29 19:08:55 tsawyer
66 * Add CONFIG_MISC_INIT_R
67 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020068 * Revision 1.9 2004/06/28 21:30:53 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020069 * Fix default BOOTARGS
70 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020071 * Revision 1.8 2004/06/17 15:51:08 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020072 * auto complete
73 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020074 * Revision 1.7 2004/06/17 15:08:49 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020075 * Add autocomplete
76 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020077 * Revision 1.6 2004/06/15 12:33:57 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020078 * debugging checkpoint
79 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020080 * Revision 1.5 2004/06/12 19:48:28 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020081 * Debugging checkpoint
82 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020083 * Revision 1.4 2004/06/02 13:03:06 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020084 * Fix eth addrs
85 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020086 * Revision 1.3 2004/05/18 19:56:10 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020087 * Change default bootcommand to pImage.metrobox
88 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020089 * Revision 1.2 2004/05/18 14:13:44 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020090 * Add bringup values for bootargs and bootcommand.
91 * Remove definition of ipaddress and serverip addresses.
92 *
Wolfgang Denk3d078ce2005-08-15 16:03:56 +020093 * Revision 1.1 2004/04/16 15:08:54 tsawyer
Stefan Roeseb79316f2005-08-15 12:31:23 +020094 * Initial Revision
95 *
96 *
97 */
98
99#ifndef __CONFIG_H
100#define __CONFIG_H
101
102/*-----------------------------------------------------------------------
103 * High Level Configuration Options
104 *----------------------------------------------------------------------*/
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200105#define CONFIG_METROBOX 1 /* Board is Metrobox */
106#define CONFIG_440GX 1 /* Specifc GX support */
Grzegorz Bernackiefa35cf2007-06-15 11:19:28 +0200107#define CONFIG_440 1 /* ... PPC440 family */
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200108#define CONFIG_4xx 1 /* ... PPC4xx family */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200109#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200110#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
111#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
Wolfgang Denk2ae18242010-10-06 09:05:45 +0200112
113#define CONFIG_SYS_TEXT_BASE 0xFFF80000
114
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200116#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200117
118#define CONFIG_VERY_BIG_RAM 1
119#define CONFIG_VERSION_VARIABLE
120
121#define CONFIG_IDENT_STRING " Sandburst Metrobox"
122
123/*-----------------------------------------------------------------------
124 * Base addresses -- Note these are effective addresses where the
125 * actual resources get mapped (not physical addresses)
126 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
128#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
129#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */
130#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
132#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200133
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200134#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
135#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000)
136#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000)
137#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
Stefan Roeseb79316f2005-08-15 12:31:23 +0200138
139/*-----------------------------------------------------------------------
140 * Initial RAM & stack pointer (placed in internal SRAM)
141 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200142#define CONFIG_SYS_TEMP_STACK_OCM 1
143#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
144#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
Wolfgang Denk553f0982010-10-26 13:32:32 +0200145#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200146
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200147#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Michael Zaidman800eb092010-09-20 08:51:53 +0200148#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
Stefan Roeseb79316f2005-08-15 12:31:23 +0200149
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
151#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200152
153/*-----------------------------------------------------------------------
154 * Serial Port
155 *----------------------------------------------------------------------*/
Stefan Roese550650d2010-09-20 16:05:31 +0200156#define CONFIG_CONS_INDEX 1 /* Use UART0 */
157#define CONFIG_SYS_NS16550
158#define CONFIG_SYS_NS16550_SERIAL
159#define CONFIG_SYS_NS16550_REG_SIZE 1
160#define CONFIG_SYS_NS16550_CLK get_serial_clock()
Stefan Roeseb79316f2005-08-15 12:31:23 +0200161#define CONFIG_SERIAL_MULTI 1
162#define CONFIG_BAUDRATE 9600
163
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200164#define CONFIG_SYS_BAUDRATE_TABLE \
Stefan Roeseb79316f2005-08-15 12:31:23 +0200165 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
166
167/*-----------------------------------------------------------------------
168 * NVRAM/RTC
169 *
170 * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
171 * The DS1743 code assumes this condition (i.e. -- it assumes the base
172 * address for the RTC registers is:
173 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200174 * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
Stefan Roeseb79316f2005-08-15 12:31:23 +0200175 *
176 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200178#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200179
180/*-----------------------------------------------------------------------
181 * FLASH related
182 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200183#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
184#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200185
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200186#undef CONFIG_SYS_FLASH_CHECKSUM
187#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
188#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200189
190/*-----------------------------------------------------------------------
191 * DDR SDRAM
192 *----------------------------------------------------------------------*/
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200193#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
194#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200195
196/*-----------------------------------------------------------------------
197 * I2C
198 *----------------------------------------------------------------------*/
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200199#define CONFIG_HARD_I2C 1 /* I2C hardware support */
200#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
Stefan Roesed0b0dca2010-04-01 14:37:24 +0200201#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200202#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */
203#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
204#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200205#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200206
207
208/*-----------------------------------------------------------------------
209 * Environment
210 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD9314cee2008-09-10 22:47:59 +0200211#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200212#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */
Jean-Christophe PLAGNIOL-VILLARDbb1f8b42008-09-05 09:19:30 +0200213#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200214#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200215
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200216#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200217#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR)
Stefan Roeseb79316f2005-08-15 12:31:23 +0200218
219#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none "
220#define CONFIG_BOOTCOMMAND "tftp 8000000 pImage.metrobox;bootm 8000000"
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200221#define CONFIG_BOOTDELAY 5 /* disable autoboot */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200222
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200223#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200224#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200225
226/*-----------------------------------------------------------------------
227 * Networking
228 *----------------------------------------------------------------------*/
Ben Warren96e21f82008-10-27 23:50:15 -0700229#define CONFIG_PPC4xx_EMAC
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200230#define CONFIG_MII 1 /* MII PHY management */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200231#define CONFIG_NET_MULTI 1
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200232#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
233#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
234#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
235#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200236#define CONFIG_HAS_ETH0
237#define CONFIG_HAS_ETH1
238#define CONFIG_HAS_ETH2
239#define CONFIG_HAS_ETH3
Stefan Roesed6c61aa2005-08-16 18:18:00 +0200240#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200241#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
242#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
243#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200244#define CONFIG_PHY_RESET_DELAY 1000
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200245#define CONFIG_NETMASK 255.255.0.0
246#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
247#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200249
250
Jon Loeliger8353e132007-07-08 14:14:17 -0500251/*
Jon Loeliger659e2f62007-07-10 09:10:49 -0500252 * BOOTP options
253 */
254#define CONFIG_BOOTP_BOOTFILESIZE
255#define CONFIG_BOOTP_BOOTPATH
256#define CONFIG_BOOTP_GATEWAY
257#define CONFIG_BOOTP_HOSTNAME
258
259
260/*
Jon Loeliger8353e132007-07-08 14:14:17 -0500261 * Command line configuration.
262 */
263#include <config_cmd_default.h>
Stefan Roeseb79316f2005-08-15 12:31:23 +0200264
Jon Loeliger8353e132007-07-08 14:14:17 -0500265#define CONFIG_CMD_PCI
266#define CONFIG_CMD_IRQ
267#define CONFIG_CMD_I2C
268#define CONFIG_CMD_DHCP
269#define CONFIG_CMD_DATE
270#define CONFIG_CMD_BEDBUG
271#define CONFIG_CMD_PING
272#define CONFIG_CMD_DIAG
273#define CONFIG_CMD_MII
274#define CONFIG_CMD_NET
275#define CONFIG_CMD_ELF
276#define CONFIG_CMD_IDE
277#define CONFIG_CMD_FAT
Stefan Roeseb79316f2005-08-15 12:31:23 +0200278
279
280/* Include NetConsole support */
281#define CONFIG_NETCONSOLE
282
283/* Include auto complete with tabs */
284#define CONFIG_AUTO_COMPLETE 1
Wolfgang Denk8078f1a2006-10-28 02:28:02 +0200285#define CONFIG_AUTO_COMPLETE 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200286#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200287
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200288#define CONFIG_SYS_LONGHELP /* undef to save memory */
289#define CONFIG_SYS_PROMPT "MetroBox=> " /* Monitor Command Prompt */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200290
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200291#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */
292#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Stefan Roeseb79316f2005-08-15 12:31:23 +0200293
294
295/*-----------------------------------------------------------------------
296 * Console Buffer
297 *----------------------------------------------------------------------*/
Jon Loeliger8353e132007-07-08 14:14:17 -0500298#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200299#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200300#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200302#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200303#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200304 /* Print Buffer Size */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200305#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
306#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200307
308/*-----------------------------------------------------------------------
309 * Memory Test
310 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200311#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
312#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200313
314/*-----------------------------------------------------------------------
315 * Compact Flash (in true IDE mode)
316 *----------------------------------------------------------------------*/
317#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
318#undef CONFIG_IDE_LED /* no led for ide supported */
319
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200320#define CONFIG_IDE_RESET /* reset for ide supported */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200321#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */
322#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200323
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200324#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000
325#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
326#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
327#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
328#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200329
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200330#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200331 to get to the correct offset */
332#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200333
334/*-----------------------------------------------------------------------
335 * PCI
336 *----------------------------------------------------------------------*/
337/* General PCI */
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200338#define CONFIG_PCI /* include pci support */
339#define CONFIG_PCI_PNP /* do pci plug-and-play */
340#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200341#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE)
Stefan Roeseb79316f2005-08-15 12:31:23 +0200342
343/* Board-specific PCI */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200344#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/
Stefan Roeseb79316f2005-08-15 12:31:23 +0200345
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200346#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
347#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200348
349/*
350 * For booting Linux, the board info and command line data
351 * have to be in the first 8 MB of memory, since this is
352 * the maximum mapped by the Linux kernel during initialization.
353 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200354#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200355
Jon Loeliger8353e132007-07-08 14:14:17 -0500356#if defined(CONFIG_CMD_KGDB)
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200357#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
358#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200359#endif
360
361/*-----------------------------------------------------------------------
362 * Miscellaneous configurable options
363 *----------------------------------------------------------------------*/
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200364#undef CONFIG_WATCHDOG /* watchdog disabled */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200365#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */
366#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200367
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200368#define CONFIG_SYS_HZ 100 /* decr freq: 1 ms ticks */
Stefan Roeseb79316f2005-08-15 12:31:23 +0200369
370
371#endif /* __CONFIG_H */