Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / dd79c97b920fdaceb5bc3f8ad0b5092b5a43e0bf / . / arch / arm / dts / imx6qdl-gw53xx.dtsi
blob: 904b2283063187469c7c389f066fb62163de85f4 [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11 /* these are used by bootloader for disabling nodes */
12 aliases {
13 led0 = &led0;
14 led1 = &led1;
15 led2 = &led2;
Tim Harvey19a387f2021-03-01 14:33:35 -0800[diff] [blame]16 mmc0 = &usdhc3;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]17 nand = &gpmi;
18 ssi0 = &ssi1;
Tim Harveydd79c972021-07-24 10:40:36 -0700[diff] [blame^]19 usb0 = &usbotg;
20 usb1 = &usbh1;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]21 };
22
23 chosen {
24 bootargs = "console=ttymxc1,115200";
25 };
26
27 backlight {
28 compatible = "pwm-backlight";
29 pwms = <&pwm4 0 5000000>;
30 brightness-levels = <0 4 8 16 32 64 128 255>;
31 default-brightness-level = <7>;
32 };
33
34 gpio-keys {
35 compatible = "gpio-keys";
36 #address-cells = <1>;
37 #size-cells = <0>;
38
39 user-pb {
40 label = "user_pb";
41 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
42 linux,code = <BTN_0>;
43 };
44
45 user-pb1x {
46 label = "user_pb1x";
47 linux,code = <BTN_1>;
48 interrupt-parent = <&gsc>;
49 interrupts = <0>;
50 };
51
52 key-erased {
53 label = "key-erased";
54 linux,code = <BTN_2>;
55 interrupt-parent = <&gsc>;
56 interrupts = <1>;
57 };
58
59 eeprom-wp {
60 label = "eeprom_wp";
61 linux,code = <BTN_3>;
62 interrupt-parent = <&gsc>;
63 interrupts = <2>;
64 };
65
66 tamper {
67 label = "tamper";
68 linux,code = <BTN_4>;
69 interrupt-parent = <&gsc>;
70 interrupts = <5>;
71 };
72
73 switch-hold {
74 label = "switch_hold";
75 linux,code = <BTN_5>;
76 interrupt-parent = <&gsc>;
77 interrupts = <7>;
78 };
79 };
80
81 leds {
82 compatible = "gpio-leds";
83 pinctrl-names = "default";
84 pinctrl-0 = <&pinctrl_gpio_leds>;
85
86 led0: user1 {
87 label = "user1";
88 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
89 default-state = "on";
90 linux,default-trigger = "heartbeat";
91 };
92
93 led1: user2 {
94 label = "user2";
95 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
96 default-state = "off";
97 };
98
99 led2: user3 {
100 label = "user3";
101 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
102 default-state = "off";
103 };
104 };
105
106 memory@10000000 {
107 device_type = "memory";
108 reg = <0x10000000 0x40000000>;
109 };
110
111 pps {
112 compatible = "pps-gpio";
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_pps>;
115 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
116 status = "okay";
117 };
118
119 reg_1p0v: regulator-1p0v {
120 compatible = "regulator-fixed";
121 regulator-name = "1P0V";
122 regulator-min-microvolt = <1000000>;
123 regulator-max-microvolt = <1000000>;
124 regulator-always-on;
125 };
126
127 reg_3p3v: regulator-3p3v {
128 compatible = "regulator-fixed";
129 regulator-name = "3P3V";
130 regulator-min-microvolt = <3300000>;
131 regulator-max-microvolt = <3300000>;
132 regulator-always-on;
133 };
134
135 reg_usb_h1_vbus: regulator-usb-h1-vbus {
136 compatible = "regulator-fixed";
137 regulator-name = "usb_h1_vbus";
138 regulator-min-microvolt = <5000000>;
139 regulator-max-microvolt = <5000000>;
140 regulator-always-on;
141 };
142
143 reg_usb_otg_vbus: regulator-usb-otg-vbus {
144 compatible = "regulator-fixed";
145 regulator-name = "usb_otg_vbus";
146 regulator-min-microvolt = <5000000>;
147 regulator-max-microvolt = <5000000>;
148 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
149 enable-active-high;
150 };
151
152 sound {
153 compatible = "fsl,imx6q-ventana-sgtl5000",
154 "fsl,imx-audio-sgtl5000";
155 model = "sgtl5000-audio";
156 ssi-controller = <&ssi1>;
157 audio-codec = <&codec>;
158 audio-routing =
159 "MIC_IN", "Mic Jack",
160 "Mic Jack", "Mic Bias",
161 "Headphone Jack", "HP_OUT";
162 mux-int-port = <1>;
163 mux-ext-port = <4>;
164 };
165};
166
167&audmux {
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_audmux>;
170 status = "okay";
171};
172
173&can1 {
174 pinctrl-names = "default";
175 pinctrl-0 = <&pinctrl_flexcan1>;
176 status = "okay";
177};
178
179&clks {
180 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
181 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
182 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
183 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
184};
185
186&fec {
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_enet>;
189 phy-mode = "rgmii-id";
190 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
Tim Harveycd18f1e2021-05-03 11:21:27 -0700[diff] [blame]191 phy-reset-duration = <10>;
192 phy-reset-post-delay = <100>;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]193 status = "okay";
194};
195
196&gpmi {
197 pinctrl-names = "default";
198 pinctrl-0 = <&pinctrl_gpmi_nand>;
199 status = "okay";
200};
201
202&hdmi {
203 ddc-i2c-bus = <&i2c3>;
204 status = "okay";
205};
206
207&i2c1 {
208 clock-frequency = <100000>;
209 pinctrl-names = "default";
210 pinctrl-0 = <&pinctrl_i2c1>;
211 status = "okay";
212
213 gsc: gsc@20 {
214 compatible = "gw,gsc";
215 reg = <0x20>;
216 interrupt-parent = <&gpio1>;
217 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
218 interrupt-controller;
219 #interrupt-cells = <1>;
220 #size-cells = <0>;
221
222 adc {
223 compatible = "gw,gsc-adc";
224 #address-cells = <1>;
225 #size-cells = <0>;
226
227 channel@0 {
228 gw,mode = <0>;
229 reg = <0x00>;
230 label = "temp";
231 };
232
233 channel@2 {
234 gw,mode = <1>;
235 reg = <0x02>;
236 label = "vdd_vin";
237 };
238
239 channel@5 {
240 gw,mode = <1>;
241 reg = <0x05>;
242 label = "vdd_3p3";
243 };
244
245 channel@8 {
246 gw,mode = <1>;
247 reg = <0x08>;
248 label = "vdd_bat";
249 };
250
251 channel@b {
252 gw,mode = <1>;
253 reg = <0x0b>;
254 label = "vdd_5p0";
255 };
256
257 channel@e {
258 gw,mode = <1>;
259 reg = <0xe>;
260 label = "vdd_arm";
261 };
262
263 channel@11 {
264 gw,mode = <1>;
265 reg = <0x11>;
266 label = "vdd_soc";
267 };
268
269 channel@14 {
270 gw,mode = <1>;
271 reg = <0x14>;
272 label = "vdd_3p0";
273 };
274
275 channel@17 {
276 gw,mode = <1>;
277 reg = <0x17>;
278 label = "vdd_1p5";
279 };
280
281 channel@1d {
282 gw,mode = <1>;
283 reg = <0x1d>;
284 label = "vdd_1p8";
285 };
286
287 channel@20 {
288 gw,mode = <1>;
289 reg = <0x20>;
290 label = "vdd_1p0";
291 };
292
293 channel@23 {
294 gw,mode = <1>;
295 reg = <0x23>;
296 label = "vdd_2p5";
297 };
298
299 channel@26 {
300 gw,mode = <1>;
301 reg = <0x26>;
302 label = "vdd_gps";
303 };
304
305 channel@29 {
306 gw,mode = <1>;
307 reg = <0x29>;
308 label = "vdd_an1";
309 };
310 };
311 };
312
313 gsc_gpio: gpio@23 {
314 compatible = "nxp,pca9555";
315 reg = <0x23>;
316 gpio-controller;
317 #gpio-cells = <2>;
318 interrupt-parent = <&gsc>;
319 interrupts = <4>;
320 };
321
322 eeprom1: eeprom@50 {
323 compatible = "atmel,24c02";
324 reg = <0x50>;
325 pagesize = <16>;
326 };
327
328 eeprom2: eeprom@51 {
329 compatible = "atmel,24c02";
330 reg = <0x51>;
331 pagesize = <16>;
332 };
333
334 eeprom3: eeprom@52 {
335 compatible = "atmel,24c02";
336 reg = <0x52>;
337 pagesize = <16>;
338 };
339
340 eeprom4: eeprom@53 {
341 compatible = "atmel,24c02";
342 reg = <0x53>;
343 pagesize = <16>;
344 };
345
346 rtc: ds1672@68 {
347 compatible = "dallas,ds1672";
348 reg = <0x68>;
349 };
350};
351
352&i2c2 {
353 clock-frequency = <100000>;
354 pinctrl-names = "default";
355 pinctrl-0 = <&pinctrl_i2c2>;
356 status = "okay";
357
358 ltc3676: pmic@3c {
359 compatible = "lltc,ltc3676";
360 reg = <0x3c>;
361 interrupt-parent = <&gpio1>;
362 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
363
364 regulators {
365 /* VDD_SOC (1+R1/R2 = 1.635) */
366 reg_vdd_soc: sw1 {
367 regulator-name = "vddsoc";
368 regulator-min-microvolt = <674400>;
369 regulator-max-microvolt = <1308000>;
370 lltc,fb-voltage-divider = <127000 200000>;
371 regulator-ramp-delay = <7000>;
372 regulator-boot-on;
373 regulator-always-on;
374 };
375
376 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
377 reg_1p8v: sw2 {
378 regulator-name = "vdd1p8";
379 regulator-min-microvolt = <1033310>;
380 regulator-max-microvolt = <2004000>;
381 lltc,fb-voltage-divider = <301000 200000>;
382 regulator-ramp-delay = <7000>;
383 regulator-boot-on;
384 regulator-always-on;
385 };
386
387 /* VDD_ARM (1+R1/R2 = 1.635) */
388 reg_vdd_arm: sw3 {
389 regulator-name = "vddarm";
390 regulator-min-microvolt = <674400>;
391 regulator-max-microvolt = <1308000>;
392 lltc,fb-voltage-divider = <127000 200000>;
393 regulator-ramp-delay = <7000>;
394 regulator-boot-on;
395 regulator-always-on;
396 };
397
398 /* VDD_DDR (1+R1/R2 = 2.105) */
399 reg_vdd_ddr: sw4 {
400 regulator-name = "vddddr";
401 regulator-min-microvolt = <868310>;
402 regulator-max-microvolt = <1684000>;
403 lltc,fb-voltage-divider = <221000 200000>;
404 regulator-ramp-delay = <7000>;
405 regulator-boot-on;
406 regulator-always-on;
407 };
408
409 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
410 reg_2p5v: ldo2 {
411 regulator-name = "vdd2p5";
412 regulator-min-microvolt = <2490375>;
413 regulator-max-microvolt = <2490375>;
414 lltc,fb-voltage-divider = <487000 200000>;
415 regulator-boot-on;
416 regulator-always-on;
417 };
418
419 /* VDD_AUD_1P8: Audio codec */
420 reg_aud_1p8v: ldo3 {
421 regulator-name = "vdd1p8a";
422 regulator-min-microvolt = <1800000>;
423 regulator-max-microvolt = <1800000>;
424 regulator-boot-on;
425 };
426
427 /* VDD_HIGH (1+R1/R2 = 4.17) */
428 reg_3p0v: ldo4 {
429 regulator-name = "vdd3p0";
430 regulator-min-microvolt = <3023250>;
431 regulator-max-microvolt = <3023250>;
432 lltc,fb-voltage-divider = <634000 200000>;
433 regulator-boot-on;
434 regulator-always-on;
435 };
436 };
437 };
438};
439
440&i2c3 {
441 clock-frequency = <100000>;
442 pinctrl-names = "default";
443 pinctrl-0 = <&pinctrl_i2c3>;
444 status = "okay";
445
446 codec: sgtl5000@a {
447 compatible = "fsl,sgtl5000";
448 reg = <0x0a>;
449 clocks = <&clks IMX6QDL_CLK_CKO>;
450 VDDA-supply = <&reg_1p8v>;
451 VDDIO-supply = <&reg_3p3v>;
452 };
453
454 touchscreen: egalax_ts@4 {
455 compatible = "eeti,egalax_ts";
456 reg = <0x04>;
457 interrupt-parent = <&gpio1>;
458 interrupts = <11 2>;
459 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
460 };
461
462 accel@1e {
463 compatible = "nxp,fxos8700";
464 reg = <0x1e>;
465 };
466};
467
468&ldb {
469 status = "okay";
470
471 lvds-channel@0 {
472 fsl,data-mapping = "spwg";
473 fsl,data-width = <18>;
474 status = "okay";
475
476 display-timings {
477 native-mode = <&timing0>;
478 timing0: hsd100pxn1 {
479 clock-frequency = <65000000>;
480 hactive = <1024>;
481 vactive = <768>;
482 hback-porch = <220>;
483 hfront-porch = <40>;
484 vback-porch = <21>;
485 vfront-porch = <7>;
486 hsync-len = <60>;
487 vsync-len = <10>;
488 };
489 };
490 };
491};
492
493&pcie {
494 pinctrl-names = "default";
495 pinctrl-0 = <&pinctrl_pcie>;
496 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
497 status = "okay";
498};
499
500&pwm2 {
501 pinctrl-names = "default";
502 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
503 status = "disabled";
504};
505
506&pwm3 {
507 pinctrl-names = "default";
508 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
509 status = "disabled";
510};
511
512&pwm4 {
513 #pwm-cells = <2>;
514 pinctrl-names = "default";
515 pinctrl-0 = <&pinctrl_pwm4>;
516 status = "okay";
517};
518
519&ssi1 {
520 status = "okay";
521};
522
523&uart1 {
524 pinctrl-names = "default";
525 pinctrl-0 = <&pinctrl_uart1>;
526 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
527 status = "okay";
528};
529
530&uart2 {
531 pinctrl-names = "default";
532 pinctrl-0 = <&pinctrl_uart2>;
533 status = "okay";
534};
535
536&uart5 {
537 pinctrl-names = "default";
538 pinctrl-0 = <&pinctrl_uart5>;
539 status = "okay";
540};
541
542&usbotg {
543 vbus-supply = <&reg_usb_otg_vbus>;
544 pinctrl-names = "default";
545 pinctrl-0 = <&pinctrl_usbotg>;
546 disable-over-current;
Tim Harvey13acc632021-03-01 14:33:31 -0800[diff] [blame]547 dr_mode = "otg";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]548 status = "okay";
549};
550
551&usbh1 {
552 vbus-supply = <&reg_usb_h1_vbus>;
553 status = "okay";
554};
555
556&usdhc3 {
557 pinctrl-names = "default", "state_100mhz", "state_200mhz";
558 pinctrl-0 = <&pinctrl_usdhc3>;
559 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
560 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
561 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
562 vmmc-supply = <&reg_3p3v>;
563 no-1-8-v; /* firmware will remove if board revision supports */
564 status = "okay";
565};
566
567&wdog1 {
568 pinctrl-names = "default";
569 pinctrl-0 = <&pinctrl_wdog>;
570 fsl,ext-reset-output;
571};
572
573&iomuxc {
574 pinctrl_audmux: audmuxgrp {
575 fsl,pins = <
576 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
577 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
578 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
579 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
580 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
581 >;
582 };
583
584 pinctrl_enet: enetgrp {
585 fsl,pins = <
586 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
587 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
588 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
589 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
590 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
591 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
592 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
593 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
594 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
595 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
596 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
597 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
598 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
599 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
600 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
601 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
Tim Harveycd18f1e2021-05-03 11:21:27 -0700[diff] [blame]602 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]603 >;
604 };
605
606 pinctrl_flexcan1: flexcan1grp {
607 fsl,pins = <
608 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
609 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
610 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
611 >;
612 };
613
614 pinctrl_gpio_leds: gpioledsgrp {
615 fsl,pins = <
616 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
617 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
618 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
619 >;
620 };
621
622 pinctrl_gpmi_nand: gpminandgrp {
623 fsl,pins = <
624 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
625 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
626 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
627 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
628 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
629 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
630 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
631 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
632 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
633 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
634 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
635 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
636 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
637 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
638 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
639 >;
640 };
641
642 pinctrl_i2c1: i2c1grp {
643 fsl,pins = <
644 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
645 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
646 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
647 >;
648 };
649
650 pinctrl_i2c2: i2c2grp {
651 fsl,pins = <
652 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
653 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
654 >;
655 };
656
657 pinctrl_i2c3: i2c3grp {
658 fsl,pins = <
659 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
660 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
661 >;
662 };
663
664 pinctrl_pcie: pciegrp {
665 fsl,pins = <
666 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
667 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
668 >;
669 };
670
671 pinctrl_pmic: pmicgrp {
672 fsl,pins = <
673 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
674 >;
675 };
676
677 pinctrl_pps: ppsgrp {
678 fsl,pins = <
679 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
680 >;
681 };
682
683 pinctrl_pwm2: pwm2grp {
684 fsl,pins = <
685 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
686 >;
687 };
688
689 pinctrl_pwm3: pwm3grp {
690 fsl,pins = <
691 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
692 >;
693 };
694
695 pinctrl_pwm4: pwm4grp {
696 fsl,pins = <
697 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
698 >;
699 };
700
701 pinctrl_uart1: uart1grp {
702 fsl,pins = <
703 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
704 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
705 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
706 >;
707 };
708
709 pinctrl_uart2: uart2grp {
710 fsl,pins = <
711 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
712 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
713 >;
714 };
715
716 pinctrl_uart5: uart5grp {
717 fsl,pins = <
718 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
719 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
720 >;
721 };
722
723 pinctrl_usbotg: usbotggrp {
724 fsl,pins = <
725 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
726 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
727 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
728 >;
729 };
730
731 pinctrl_usdhc3: usdhc3grp {
732 fsl,pins = <
733 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
734 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
735 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
736 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
737 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
738 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
739 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
740 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
741 >;
742 };
743
744 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
745 fsl,pins = <
746 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
747 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
748 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
749 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
750 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
751 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
752 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
753 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
754 >;
755 };
756
757 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
758 fsl,pins = <
759 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
760 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
761 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
762 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
763 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
764 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
765 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
766 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
767 >;
768 };
769
770 pinctrl_wdog: wdoggrp {
771 fsl,pins = <
772 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
773 >;
774 };
775};