blob: 3df8de0138dac18d3f96382712ab71efed2524b9 [file] [log] [blame]
Eric Nelsond67b0d92013-03-11 08:44:53 +00001/*
2 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Boundary Devices Nitrogen6X
5 * and Freescale i.MX6Q Sabre Lite boards.
6 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02007 * SPDX-License-Identifier: GPL-2.0+
Eric Nelsond67b0d92013-03-11 08:44:53 +00008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13#define CONFIG_MX6
14#define CONFIG_DISPLAY_CPUINFO
15#define CONFIG_DISPLAY_BOARDINFO
16
17#define CONFIG_MACH_TYPE 3769
18
19#include <asm/arch/imx-regs.h>
20#include <asm/imx-common/gpio.h>
21
22#define CONFIG_CMDLINE_TAG
23#define CONFIG_SETUP_MEMORY_TAGS
24#define CONFIG_INITRD_TAG
25#define CONFIG_REVISION_TAG
26
27/* Size of malloc() pool */
28#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
29
30#define CONFIG_BOARD_EARLY_INIT_F
31#define CONFIG_MISC_INIT_R
32#define CONFIG_MXC_GPIO
Troy Kiskyf3d7cff2013-09-25 18:41:18 -070033#define CONFIG_MV_UDC
34#define CONFIG_USBD_HS
35#define CONFIG_USB_GADGET_DUALSPEED
36#define CONFIG_USB_ETHER
37#define CONFIG_USB_ETH_CDC
38#define CONFIG_NETCONSOLE
Eric Nelsond67b0d92013-03-11 08:44:53 +000039
Benoît Thébaudeau70a5ef22013-04-23 10:17:46 +000040#define CONFIG_CMD_FUSE
41#ifdef CONFIG_CMD_FUSE
42#define CONFIG_MXC_OCOTP
43#endif
44
Eric Nelsond67b0d92013-03-11 08:44:53 +000045#define CONFIG_MXC_UART
46#define CONFIG_MXC_UART_BASE UART2_BASE
47
48#define CONFIG_CMD_SF
49#ifdef CONFIG_CMD_SF
50#define CONFIG_SPI_FLASH
51#define CONFIG_SPI_FLASH_SST
52#define CONFIG_MXC_SPI
53#define CONFIG_SF_DEFAULT_BUS 0
54#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
55#define CONFIG_SF_DEFAULT_SPEED 25000000
56#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
57#endif
58
59/* I2C Configs */
60#define CONFIG_CMD_I2C
tremb089d032013-09-21 18:13:36 +020061#define CONFIG_SYS_I2C
62#define CONFIG_SYS_I2C_MXC
Eric Nelsond67b0d92013-03-11 08:44:53 +000063#define CONFIG_SYS_I2C_SPEED 100000
64
65/* OCOTP Configs */
66#define CONFIG_CMD_IMXOTP
67#ifdef CONFIG_CMD_IMXOTP
68#define CONFIG_IMX_OTP
69#define IMX_OTP_BASE OCOTP_BASE_ADDR
70#define IMX_OTP_ADDR_MAX 0x7F
71#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA
72#define IMX_OTPWRITE_ENABLED
73#endif
74
75/* MMC Configs */
76#define CONFIG_FSL_ESDHC
77#define CONFIG_FSL_USDHC
78#define CONFIG_SYS_FSL_ESDHC_ADDR 0
79#define CONFIG_SYS_FSL_USDHC_NUM 2
80
81#define CONFIG_MMC
82#define CONFIG_CMD_MMC
83#define CONFIG_GENERIC_MMC
84#define CONFIG_BOUNCE_BUFFER
85#define CONFIG_CMD_EXT2
86#define CONFIG_CMD_FAT
87#define CONFIG_DOS_PARTITION
88
89#ifdef CONFIG_MX6Q
90#define CONFIG_CMD_SATA
91#endif
92
93/*
94 * SATA Configs
95 */
96#ifdef CONFIG_CMD_SATA
97#define CONFIG_DWC_AHSATA
98#define CONFIG_SYS_SATA_MAX_DEVICE 1
99#define CONFIG_DWC_AHSATA_PORT_ID 0
100#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
101#define CONFIG_LBA48
102#define CONFIG_LIBATA
103#endif
104
105#define CONFIG_CMD_PING
106#define CONFIG_CMD_DHCP
107#define CONFIG_CMD_MII
108#define CONFIG_CMD_NET
109#define CONFIG_FEC_MXC
110#define CONFIG_MII
111#define IMX_FEC_BASE ENET_BASE_ADDR
112#define CONFIG_FEC_XCV_TYPE RGMII
113#define CONFIG_ETHPRIME "FEC"
114#define CONFIG_FEC_MXC_PHYADDR 6
115#define CONFIG_PHYLIB
116#define CONFIG_PHY_MICREL
117#define CONFIG_PHY_MICREL_KSZ9021
118
119/* USB Configs */
120#define CONFIG_CMD_USB
121#define CONFIG_CMD_FAT
122#define CONFIG_USB_EHCI
123#define CONFIG_USB_EHCI_MX6
124#define CONFIG_USB_STORAGE
125#define CONFIG_USB_HOST_ETHER
126#define CONFIG_USB_ETHER_ASIX
127#define CONFIG_USB_ETHER_SMSC95XX
Troy Kiskyd1a52862013-10-10 15:27:59 -0700128#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
129#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
Eric Nelsond67b0d92013-03-11 08:44:53 +0000130#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
131#define CONFIG_MXC_USB_FLAGS 0
132
133/* Miscellaneous commands */
134#define CONFIG_CMD_BMODE
135#define CONFIG_CMD_SETEXPR
136
137/* Framebuffer and LCD */
138#define CONFIG_VIDEO
139#define CONFIG_VIDEO_IPUV3
140#define CONFIG_CFB_CONSOLE
141#define CONFIG_VGA_AS_SINGLE_DEVICE
142#define CONFIG_SYS_CONSOLE_IS_IN_ENV
143#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
144#define CONFIG_VIDEO_BMP_RLE8
145#define CONFIG_SPLASH_SCREEN
146#define CONFIG_BMP_16BPP
147#define CONFIG_VIDEO_LOGO
148#define CONFIG_IPUV3_CLK 260000000
149#define CONFIG_CMD_HDMIDETECT
150#define CONFIG_CONSOLE_MUX
Pardeep Kumar Singla5ea7f0e2013-07-25 12:12:13 -0500151#define CONFIG_IMX_HDMI
Eric Nelsond67b0d92013-03-11 08:44:53 +0000152
153/* allow to overwrite serial and ethaddr */
154#define CONFIG_ENV_OVERWRITE
155#define CONFIG_CONS_INDEX 1
156#define CONFIG_BAUDRATE 115200
157
158/* Command definition */
159#include <config_cmd_default.h>
160
161#undef CONFIG_CMD_IMLS
162
163#define CONFIG_BOOTDELAY 1
164
165#define CONFIG_PREBOOT ""
166
167#define CONFIG_LOADADDR 0x12000000
168#define CONFIG_SYS_TEXT_BASE 0x17800000
169
170#ifdef CONFIG_CMD_SATA
171#define CONFIG_DRIVE_SATA "sata "
172#else
173#define CONFIG_DRIVE_SATA
174#endif
175
176#ifdef CONFIG_CMD_MMC
177#define CONFIG_DRIVE_MMC "mmc "
178#else
179#define CONFIG_DRIVE_MMC
180#endif
181
182#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
183
Fabio Estevamf8b1e862013-07-26 11:37:17 -0300184#if defined(CONFIG_SABRELITE)
185#define CONFIG_EXTRA_ENV_SETTINGS \
186 "script=boot.scr\0" \
187 "uimage=uImage\0" \
188 "console=ttymxc1\0" \
189 "fdt_high=0xffffffff\0" \
190 "initrd_high=0xffffffff\0" \
191 "fdt_file=imx6q-sabrelite.dtb\0" \
192 "fdt_addr=0x11000000\0" \
193 "boot_fdt=try\0" \
194 "ip_dyn=yes\0" \
195 "mmcdev=0\0" \
196 "mmcpart=1\0" \
197 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
198 "mmcargs=setenv bootargs console=${console},${baudrate} " \
199 "root=${mmcroot}\0" \
200 "loadbootscript=" \
201 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
202 "bootscript=echo Running bootscript from mmc ...; " \
203 "source\0" \
204 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
205 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
206 "mmcboot=echo Booting from mmc ...; " \
207 "run mmcargs; " \
208 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
209 "if run loadfdt; then " \
210 "bootm ${loadaddr} - ${fdt_addr}; " \
211 "else " \
212 "if test ${boot_fdt} = try; then " \
213 "bootm; " \
214 "else " \
215 "echo WARN: Cannot load the DT; " \
216 "fi; " \
217 "fi; " \
218 "else " \
219 "bootm; " \
220 "fi;\0" \
221 "netargs=setenv bootargs console=${console},${baudrate} " \
222 "root=/dev/nfs " \
223 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
224 "netboot=echo Booting from net ...; " \
225 "run netargs; " \
226 "if test ${ip_dyn} = yes; then " \
227 "setenv get_cmd dhcp; " \
228 "else " \
229 "setenv get_cmd tftp; " \
230 "fi; " \
231 "${get_cmd} ${uimage}; " \
232 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
233 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
234 "bootm ${loadaddr} - ${fdt_addr}; " \
235 "else " \
236 "if test ${boot_fdt} = try; then " \
237 "bootm; " \
238 "else " \
239 "echo WARN: Cannot load the DT; " \
240 "fi; " \
241 "fi; " \
242 "else " \
243 "bootm; " \
244 "fi;\0"
245
246#define CONFIG_BOOTCOMMAND \
247 "mmc dev ${mmcdev}; if mmc rescan; then " \
248 "if run loadbootscript; then " \
249 "run bootscript; " \
250 "else " \
251 "if run loaduimage; then " \
252 "run mmcboot; " \
253 "else run netboot; " \
254 "fi; " \
255 "fi; " \
256 "else run netboot; fi"
257#else
Eric Nelsond67b0d92013-03-11 08:44:53 +0000258#define CONFIG_EXTRA_ENV_SETTINGS \
259 "console=ttymxc1\0" \
260 "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
261 "sf erase 0xc0000 0x2000 && " \
262 "echo restored environment to factory default ; fi\0" \
263 "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
264 "; do " \
265 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
266 "for fs in fat ext2 ; do " \
267 "${fs}load " \
268 "${dtype} ${disk}:1 " \
269 "10008000 " \
270 "/6x_bootscript" \
271 "&& source 10008000 ; " \
272 "done ; " \
273 "done ; " \
274 "done; " \
275 "setenv stdout serial,vga ; " \
276 "echo ; echo 6x_bootscript not found ; " \
277 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
278 "echo details at http://boundarydevices.com/6q_bootscript ; " \
279 "setenv stdout serial\0" \
280 "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
281 "; do " \
282 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
283 "for fs in fat ext2 ; do " \
284 "${fs}load ${dtype} ${disk}:1 10008000 " \
285 "/6x_upgrade " \
286 "&& source 10008000 ; " \
287 "done ; " \
288 "done ; " \
289 "done\0" \
290
Fabio Estevamf8b1e862013-07-26 11:37:17 -0300291#endif
Eric Nelsond67b0d92013-03-11 08:44:53 +0000292/* Miscellaneous configurable options */
293#define CONFIG_SYS_LONGHELP
294#define CONFIG_SYS_HUSH_PARSER
295#define CONFIG_SYS_PROMPT "U-Boot > "
296#define CONFIG_AUTO_COMPLETE
297#define CONFIG_SYS_CBSIZE 1024
298
299/* Print Buffer Size */
300#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
301#define CONFIG_SYS_MAXARGS 16
302#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
303
304#define CONFIG_SYS_MEMTEST_START 0x10000000
305#define CONFIG_SYS_MEMTEST_END 0x10010000
306#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
307
308#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
Eric Nelsond67b0d92013-03-11 08:44:53 +0000309
310#define CONFIG_CMDLINE_EDITING
311
312/* Physical Memory Map */
313#define CONFIG_NR_DRAM_BANKS 1
314#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
315
316#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
317#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
318#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
319
320#define CONFIG_SYS_INIT_SP_OFFSET \
321 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
322#define CONFIG_SYS_INIT_SP_ADDR \
323 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
324
325/* FLASH and environment organization */
326#define CONFIG_SYS_NO_FLASH
327
328#define CONFIG_ENV_SIZE (8 * 1024)
329
Fabio Estevamf8b1e862013-07-26 11:37:17 -0300330#if defined(CONFIG_SABRELITE)
331#define CONFIG_ENV_IS_IN_MMC
332#else
Eric Nelsond67b0d92013-03-11 08:44:53 +0000333#define CONFIG_ENV_IS_IN_SPI_FLASH
Fabio Estevamf8b1e862013-07-26 11:37:17 -0300334#endif
Eric Nelsond67b0d92013-03-11 08:44:53 +0000335
336#if defined(CONFIG_ENV_IS_IN_MMC)
337#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
338#define CONFIG_SYS_MMC_ENV_DEV 0
339#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
340#define CONFIG_ENV_OFFSET (768 * 1024)
341#define CONFIG_ENV_SECT_SIZE (8 * 1024)
342#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
343#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
344#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
345#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
346#endif
347
348#define CONFIG_OF_LIBFDT
349#define CONFIG_CMD_BOOTZ
350
Eric Nelsond67b0d92013-03-11 08:44:53 +0000351#ifndef CONFIG_SYS_DCACHE_OFF
352#define CONFIG_CMD_CACHE
353#endif
354
355#define CONFIG_CMD_BMP
356
357#define CONFIG_CMD_TIME
358#define CONFIG_SYS_ALT_MEMTEST
359
Robert Winkler9b9ba6f2013-06-06 10:39:26 -0700360#define CONFIG_CMD_BOOTZ
Robert Winkler36558292013-06-06 10:39:27 -0700361#define CONFIG_SUPPORT_RAW_INITRD
Robert Winkler262326b2013-06-06 10:39:28 -0700362#define CONFIG_CMD_FS_GENERIC
Robert Winkler9b9ba6f2013-06-06 10:39:26 -0700363
Eric Nelsond67b0d92013-03-11 08:44:53 +0000364#endif /* __CONFIG_H */