blob: cae70760bcb5a3ea4ecd28ab44fb12a3daaecf8e [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Stefan Roese01e62c72016-05-17 15:04:16 +02002/*
3 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
Stefan Roese01e62c72016-05-17 15:04:16 +02004 */
5
Konstantin Porotchkinc5330ae2017-02-16 13:52:22 +02006#ifndef _CONFIG_MVEBU_ARMADA_37XX_H
7#define _CONFIG_MVEBU_ARMADA_37XX_H
Stefan Roese01e62c72016-05-17 15:04:16 +02008
Vladimir Vid6728da52020-09-07 08:56:45 +02009#include <linux/sizes.h>
10
Stefan Roese01e62c72016-05-17 15:04:16 +020011/*
12 * High Level Configuration Options (easy to change)
13 */
Stefan Roese01e62c72016-05-17 15:04:16 +020014
Stefan Roese01e62c72016-05-17 15:04:16 +020015/* additions for new ARM relocation support */
16#define CONFIG_SYS_SDRAM_BASE 0x00000000
17
Vladimir Vid6728da52020-09-07 08:56:45 +020018#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
19
Pali Rohár7d9e9f52021-05-25 19:42:42 +020020#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \
21 9600, 19200, 38400, 57600, 115200, \
22 230400, 460800, 500000, 576000, \
23 921600, 1000000, 1152000, 1500000, \
24 2000000, 2500000, 3000000, 3500000, \
25 4000000, 4500000, 5000000, 5500000, \
26 6000000 }
Stefan Roese01e62c72016-05-17 15:04:16 +020027
Stefan Roese01e62c72016-05-17 15:04:16 +020028/*
Stefan Roese01e62c72016-05-17 15:04:16 +020029 * Other required minimal configurations
30 */
Stefan Roese01e62c72016-05-17 15:04:16 +020031
Stefan Roese01e62c72016-05-17 15:04:16 +020032/*
Pali Rohárc4df0f62020-12-23 12:21:29 +010033 * Environment
34 */
35#define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */
36
Bin Mengcbb89ed2017-07-19 21:50:06 +080037#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
Stefan Roese01e62c72016-05-17 15:04:16 +020038
Stefan Roese01e62c72016-05-17 15:04:16 +020039/*
40 * SATA/SCSI/AHCI configuration
41 */
Stefan Roese01e62c72016-05-17 15:04:16 +020042#define CONFIG_LBA48
43#define CONFIG_SYS_64BIT_LBA
44
Andre Heider6779d652017-12-02 10:46:37 +010045#define BOOT_TARGET_DEVICES(func) \
46 func(MMC, mmc, 1) \
47 func(MMC, mmc, 0) \
48 func(USB, usb, 0) \
49 func(SCSI, scsi, 0) \
50 func(PXE, pxe, na) \
51 func(DHCP, dhcp, na)
52
53#include <config_distro_bootcmd.h>
54
Pali Rohárc4df0f62020-12-23 12:21:29 +010055/* filler for default values filled by board_early_init_f() */
56#define ENV_RW_FILLER \
Pali Rohár44be8352020-12-23 12:21:30 +010057 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for ethaddr= */ \
58 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth1addr= */ \
59 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth2addr= */ \
60 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth3addr= */ \
Pali Rohárc4df0f62020-12-23 12:21:29 +010061 "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for fdtfile= */ \
62 ""
63
Pali Rohár6b610662020-08-27 15:01:27 +020064/* fdt_addr and kernel_addr are needed for existing distribution boot scripts */
Andre Heidere1489ba2017-12-02 10:46:35 +010065#define CONFIG_EXTRA_ENV_SETTINGS \
Pali Rohárbb40fe12020-08-27 15:01:25 +020066 "scriptaddr=0x6d00000\0" \
67 "pxefile_addr_r=0x6e00000\0" \
Pali Rohár6b610662020-08-27 15:01:27 +020068 "fdt_addr=0x6f00000\0" \
Pali Rohárbb40fe12020-08-27 15:01:25 +020069 "fdt_addr_r=0x6f00000\0" \
Pali Rohár6b610662020-08-27 15:01:27 +020070 "kernel_addr=0x7000000\0" \
Pali Rohárbb40fe12020-08-27 15:01:25 +020071 "kernel_addr_r=0x7000000\0" \
72 "ramdisk_addr_r=0xa000000\0" \
Pali Rohárc4df0f62020-12-23 12:21:29 +010073 BOOTENV \
74 ENV_RW_FILLER
Andre Heidere1489ba2017-12-02 10:46:35 +010075
Konstantin Porotchkinc5330ae2017-02-16 13:52:22 +020076#endif /* _CONFIG_MVEBU_ARMADA_37XX_H */