blob: 84d27b67a929d54473f77b3a1cdc1922a87c486b [file] [log] [blame]
wdenke2211742002-11-02 23:30:20 +00001/*
2 * (C) Copyright 2002 ELTEC Elektronik AG
3 * Frank Gottschling <fgottschling@eltec.de>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
wdenke2211742002-11-02 23:30:20 +000031#define GTREGREAD(x) 0xffffffff /* needed for debug */
32
33/*
34 * High Level Configuration Options
35 * (easy to change)
36 */
37
38/* these hardware addresses are pretty bogus, please change them to
39 suit your needs */
40
41/* first ethernet */
42#define CONFIG_ETHADDR 00:00:5b:ee:de:ad
43
44#define CONFIG_IPADDR 192.168.0.105
45#define CONFIG_SERVERIP 192.168.0.100
46
47#define CONFIG_ELPPC 1 /* this is an BAB740/BAB750 board */
48
49#define CONFIG_BAUDRATE 9600 /* console baudrate */
50
51#undef CONFIG_WATCHDOG
52
53#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
54
55#define CONFIG_ZERO_BOOTDELAY_CHECK
56
57#undef CONFIG_BOOTARGS
58#define CONFIG_BOOTCOMMAND \
59 "bootp 1000000; " \
60 "setenv bootargs root=ramfs console=ttyS00,9600 " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010061 "ip=${ipaddr}:${serverip}:${rootpath}:${gatewayip}:" \
62 "${netmask}:${hostname}:eth0:none; " \
wdenke2211742002-11-02 23:30:20 +000063 "bootm"
64
65#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020066#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
wdenke2211742002-11-02 23:30:20 +000067
Jon Loeliger5d2ebe12007-07-09 21:16:53 -050068/*
69 * BOOTP options
70 */
71#define CONFIG_BOOTP_SUBNETMASK
72#define CONFIG_BOOTP_GATEWAY
73#define CONFIG_BOOTP_HOSTNAME
74#define CONFIG_BOOTP_BOOTPATH
75
76#define CONFIG_BOOTP_BOOTFILESIZE
wdenke2211742002-11-02 23:30:20 +000077
wdenke2211742002-11-02 23:30:20 +000078
Jon Loeligerdcaa7152007-07-07 20:56:05 -050079/*
80 * Command line configuration.
81 */
82#include <config_cmd_default.h>
83
84#define CONFIG_CMD_PCI
85#define CONFIG_CMD_JFFS2
86
wdenke2211742002-11-02 23:30:20 +000087
88/*
89 * Miscellaneous configurable options
90 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020091#define CONFIG_SYS_LONGHELP /* undef to save memory */
92#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenke2211742002-11-02 23:30:20 +000093
94/*
95 * choose between COM1 and COM2 as serial console
96 */
97#define CONFIG_CONS_INDEX 1
98
Jon Loeligerdcaa7152007-07-07 20:56:05 -050099#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200100#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenke2211742002-11-02 23:30:20 +0000101#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200102#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenke2211742002-11-02 23:30:20 +0000103#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200104#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
105#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
106#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenke2211742002-11-02 23:30:20 +0000107
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200108#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
109#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
wdenke2211742002-11-02 23:30:20 +0000110
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200111#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
wdenke2211742002-11-02 23:30:20 +0000112
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200113#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */
wdenke2211742002-11-02 23:30:20 +0000114
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
wdenke2211742002-11-02 23:30:20 +0000116
117/*
118 * Low Level Configuration Settings
119 * (address mappings, register initial values, etc.)
120 * You should know what you are doing if you make changes here.
121 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200122#define CONFIG_SYS_BOARD_ASM_INIT
wdenke2211742002-11-02 23:30:20 +0000123#define CONFIG_MISC_INIT_R
124
125/*
126 * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP)
127 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200128#undef CONFIG_SYS_ADDRESS_MAP_A
wdenke2211742002-11-02 23:30:20 +0000129
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200130#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
131#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
132#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
wdenke2211742002-11-02 23:30:20 +0000133
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200134#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
135#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
136#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000
wdenke2211742002-11-02 23:30:20 +0000137
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
139#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000
140#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
wdenke2211742002-11-02 23:30:20 +0000141
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200142#define CONFIG_SYS_PCI_IO_BUS 0x00800000
143#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000
144#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
wdenke2211742002-11-02 23:30:20 +0000145
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_SYS_ISA_IO_BUS 0x00000000
147#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000
148#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
wdenke2211742002-11-02 23:30:20 +0000149
150/* driver defines FDC,IDE,... */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
152#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
153#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
wdenke2211742002-11-02 23:30:20 +0000154
155/*
156 * Start addresses for the final memory configuration
157 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200158 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenke2211742002-11-02 23:30:20 +0000159 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_SDRAM_BASE 0x00000000
wdenke2211742002-11-02 23:30:20 +0000161
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200162#define CONFIG_SYS_USR_LED_BASE 0x78000000
163#define CONFIG_SYS_NVRAM_BASE 0xff000000
164#define CONFIG_SYS_UART_BASE 0xff400000
165#define CONFIG_SYS_FLASH_BASE 0xfff00000
wdenke2211742002-11-02 23:30:20 +0000166
167#define MPC107_EUMB_ADDR 0xfce00000
168#define MPC107_EUMB_PI 0xfce41090
169#define MPC107_EUMB_GCR 0xfce41020
170#define MPC107_EUMB_IACKR 0xfce600a0
171#define MPC107_I2C_ADDR 0xfce03000
172
173/*
174 * Definitions for initial stack pointer and data area
175 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200176#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
177#define CONFIG_SYS_INIT_RAM_END 0x4000
178#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */
179#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
180#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenke2211742002-11-02 23:30:20 +0000181
182/*
183 * Flash mapping/organization on the MPC10x.
184 */
185#define FLASH_BASE0_PRELIM 0xff800000
186#define FLASH_BASE1_PRELIM 0xffc00000
187
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200188#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
189#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
wdenke2211742002-11-02 23:30:20 +0000190
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200191#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
192#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenke2211742002-11-02 23:30:20 +0000193
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200194/*
195 * JFFS2 partitions
196 *
197 */
198/* No command line, one static partition, whole device */
Stefan Roese68d7d652009-03-19 13:30:36 +0100199#undef CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200200#define CONFIG_JFFS2_DEV "nor0"
201#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
202#define CONFIG_JFFS2_PART_OFFSET 0x00000000
203
204/* mtdparts command line support */
205/* Note: fake mtd_id used, no linux mtd map file */
206/*
Stefan Roese68d7d652009-03-19 13:30:36 +0100207#define CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200208#define MTDIDS_DEFAULT "nor0=elppc-0,nor1=elppc-1"
209#define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)"
210*/
wdenke2211742002-11-02 23:30:20 +0000211
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200212#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
213#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
214#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
215#undef CONFIG_SYS_MEMTEST
wdenke2211742002-11-02 23:30:20 +0000216
217/*
218 * Environment settings
219 */
220#define CONFIG_ENV_OVERWRITE
Jean-Christophe PLAGNIOL-VILLARD9314cee2008-09-10 22:47:59 +0200221#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200222#define CONFIG_SYS_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200223#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
224#define CONFIG_ENV_ADDR 0x0
225#define CONFIG_ENV_MAP_ADRS 0xff000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200226#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
227#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */
228#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
wdenke2211742002-11-02 23:30:20 +0000229
230/*
231 * Serial devices
232 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200233#define CONFIG_SYS_NS16550
234#define CONFIG_SYS_NS16550_SERIAL
235#define CONFIG_SYS_NS16550_REG_SIZE 1
236#define CONFIG_SYS_NS16550_CLK 24000000
237#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0)
238#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_UART_BASE + 8)
wdenke2211742002-11-02 23:30:20 +0000239
240/*
241 * PCI stuff
242 */
243#define CONFIG_PCI /* include pci support */
244#define CONFIG_PCI_PNP /* pci plug-and-play */
245#define CONFIG_PCI_HOST PCI_HOST_AUTO
246#undef CONFIG_PCI_SCAN_SHOW
247
248/*
249 * Optional Video console (graphic: SMI LynxEM)
250 */
251#define CONFIG_VIDEO
252#define CONFIG_CFB_CONSOLE
253#define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10))
254#define VIDEO_TSTC_FCT serial_tstc
255#define VIDEO_GETC_FCT serial_getc
256
257#define CONFIG_VIDEO_SMI_LYNXEM
258#define CONFIG_VIDEO_LOGO
259#define CONFIG_CONSOLE_EXTRA_INFO
260
261/*
262 * Initial BATs
263 */
264#if 1
265
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_IBAT0L 0
267#define CONFIG_SYS_IBAT0U 0
268#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
269#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000270
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200271#define CONFIG_SYS_IBAT1L 0
272#define CONFIG_SYS_IBAT1U 0
273#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
274#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000275
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200276#define CONFIG_SYS_IBAT2L 0
277#define CONFIG_SYS_IBAT2U 0
278#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
279#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
wdenke2211742002-11-02 23:30:20 +0000280
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200281#define CONFIG_SYS_IBAT3L 0
282#define CONFIG_SYS_IBAT3U 0
283#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
284#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
wdenke2211742002-11-02 23:30:20 +0000285
286#else
287
288/* SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200289#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
290#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
291#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
292#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000293
294/* address range for flashes */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200295#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
296#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
297#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
298#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000299
300/* ISA IO space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
302#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
303#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
304#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
wdenke2211742002-11-02 23:30:20 +0000305
306/* ISA memory space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200307#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
308#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
309#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
310#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
wdenke2211742002-11-02 23:30:20 +0000311
312#endif
313
314/*
315 * Speed settings are board specific
316 */
Wolfgang Denkee80fa72010-06-13 18:38:23 +0200317#define CONFIG_SYS_BUS_CLK 100000000
318#define CONFIG_SYS_CPU_CLK 400000000
wdenke2211742002-11-02 23:30:20 +0000319
320/*
321 * For booting Linux, the board info and command line data
322 * have to be in the first 8 MB of memory, since this is
323 * the maximum mapped by the Linux kernel during initialization.
324 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200325#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenke2211742002-11-02 23:30:20 +0000326
327/*
328 * Cache Configuration
329 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200330#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
Jon Loeligerdcaa7152007-07-07 20:56:05 -0500331#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200332#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
wdenke2211742002-11-02 23:30:20 +0000333#endif
334
335/*
336 * L2CR setup -- make sure this is right for your board!
wdenk1d0350e2002-11-11 21:14:20 +0000337 * look in include/74xx_7xx.h for the defines used here
wdenke2211742002-11-02 23:30:20 +0000338 */
339
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200340#define CONFIG_SYS_L2
wdenke2211742002-11-02 23:30:20 +0000341
342#if 1
343#define L2_INIT 0 /* cpu 750 CXe*/
344#else
345#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
wdenk8bde7f72003-06-27 21:31:46 +0000346 L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
wdenke2211742002-11-02 23:30:20 +0000347#endif
348#define L2_ENABLE (L2_INIT | L2CR_L2E)
349
350/*
351 * Internal Definitions
352 *
353 * Boot Flags
354 */
355#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
356#define BOOTFLAG_WARM 0x02 /* Software reboot */
357
358#define CONFIG_NET_MULTI /* Multi ethernet cards support */
359#define CONFIG_EEPRO100
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200360#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
wdenke2211742002-11-02 23:30:20 +0000361#define CONFIG_EEPRO100_SROM_WRITE
362
363#endif /* __CONFIG_H */