blob: 159fe76aa5f88d7d60b18a716ccaa6983b27a1f3 [file] [log] [blame]
Guennadi Liakhovetskie0056b32008-08-31 00:39:47 +02001/*
2 * (C) Copyright 2006 DENX Software Engineering
3 *
4 * Implementation for U-Boot 1.1.6 by Samsung
5 *
6 * (C) Copyright 2008
7 * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * MA 02111-1307 USA
26 */
27
28#include <common.h>
29
30#include <nand.h>
31#include <s3c6400.h>
32
33#include <asm/io.h>
34#include <asm/errno.h>
35
36#define MAX_CHIPS 2
37static int nand_cs[MAX_CHIPS] = {0, 1};
38
39#ifdef CONFIG_NAND_SPL
40#define printf(arg...) do {} while (0)
41#endif
42
43/* Nand flash definition values by jsgood */
44#ifdef S3C_NAND_DEBUG
45/*
46 * Function to print out oob buffer for debugging
47 * Written by jsgood
48 */
49static void print_oob(const char *header, struct mtd_info *mtd)
50{
51 int i;
52 struct nand_chip *chip = mtd->priv;
53
54 printf("%s:\t", header);
55
56 for (i = 0; i < 64; i++)
57 printf("%02x ", chip->oob_poi[i]);
58
59 printf("\n");
60}
61#endif /* S3C_NAND_DEBUG */
62
63#ifdef CONFIG_NAND_SPL
64static u_char nand_read_byte(struct mtd_info *mtd)
65{
66 struct nand_chip *this = mtd->priv;
67 return readb(this->IO_ADDR_R);
68}
69
70static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
71{
72 int i;
73 struct nand_chip *this = mtd->priv;
74
75 for (i = 0; i < len; i++)
76 writeb(buf[i], this->IO_ADDR_W);
77}
78
79static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
80{
81 int i;
82 struct nand_chip *this = mtd->priv;
83
84 for (i = 0; i < len; i++)
85 buf[i] = readb(this->IO_ADDR_R);
86}
87#endif
88
89static void s3c_nand_select_chip(struct mtd_info *mtd, int chip)
90{
91 int ctrl = readl(NFCONT);
92
93 switch (chip) {
94 case -1:
95 ctrl |= 6;
96 break;
97 case 0:
98 ctrl &= ~2;
99 break;
100 case 1:
101 ctrl &= ~4;
102 break;
103 default:
104 return;
105 }
106
107 writel(ctrl, NFCONT);
108}
109
110/*
111 * Hardware specific access to control-lines function
112 * Written by jsgood
113 */
114static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
115{
116 struct nand_chip *this = mtd->priv;
117
118 if (ctrl & NAND_CTRL_CHANGE) {
119 if (ctrl & NAND_CLE)
120 this->IO_ADDR_W = (void __iomem *)NFCMMD;
121 else if (ctrl & NAND_ALE)
122 this->IO_ADDR_W = (void __iomem *)NFADDR;
123 else
124 this->IO_ADDR_W = (void __iomem *)NFDATA;
125 if (ctrl & NAND_NCE)
126 s3c_nand_select_chip(mtd, *(int *)this->priv);
127 else
128 s3c_nand_select_chip(mtd, -1);
129 }
130
131 if (cmd != NAND_CMD_NONE)
132 writeb(cmd, this->IO_ADDR_W);
133}
134
135/*
136 * Function for checking device ready pin
137 * Written by jsgood
138 */
139static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
140{
141 return !!(readl(NFSTAT) & NFSTAT_RnB);
142}
143
144#ifdef CFG_S3C_NAND_HWECC
145/*
146 * This function is called before encoding ecc codes to ready ecc engine.
147 * Written by jsgood
148 */
149static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode)
150{
151 u_long nfcont, nfconf;
152
153 /*
154 * The original driver used 4-bit ECC for "new" MLC chips, i.e., for
155 * those with non-zero ID[3][3:2], which anyway only holds for ST
156 * (Numonyx) chips
157 */
158 nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT;
159
160 writel(nfconf, NFCONF);
161
162 /* Initialize & unlock */
163 nfcont = readl(NFCONT);
164 nfcont |= NFCONT_INITECC;
165 nfcont &= ~NFCONT_MECCLOCK;
166
167 if (mode == NAND_ECC_WRITE)
168 nfcont |= NFCONT_ECC_ENC;
169 else if (mode == NAND_ECC_READ)
170 nfcont &= ~NFCONT_ECC_ENC;
171
172 writel(nfcont, NFCONT);
173}
174
175/*
176 * This function is called immediately after encoding ecc codes.
177 * This function returns encoded ecc codes.
178 * Written by jsgood
179 */
180static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
181 u_char *ecc_code)
182{
183 u_long nfcont, nfmecc0;
184
185 /* Lock */
186 nfcont = readl(NFCONT);
187 nfcont |= NFCONT_MECCLOCK;
188 writel(nfcont, NFCONT);
189
190 nfmecc0 = readl(NFMECC0);
191
192 ecc_code[0] = nfmecc0 & 0xff;
193 ecc_code[1] = (nfmecc0 >> 8) & 0xff;
194 ecc_code[2] = (nfmecc0 >> 16) & 0xff;
195 ecc_code[3] = (nfmecc0 >> 24) & 0xff;
196
197 return 0;
198}
199
200/*
201 * This function determines whether read data is good or not.
202 * If SLC, must write ecc codes to controller before reading status bit.
203 * If MLC, status bit is already set, so only reading is needed.
204 * If status bit is good, return 0.
205 * If correctable errors occured, do that.
206 * If uncorrectable errors occured, return -1.
207 * Written by jsgood
208 */
209static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
210 u_char *read_ecc, u_char *calc_ecc)
211{
212 int ret = -1;
213 u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr;
214 u_char err_type, repaired;
215
216 /* SLC: Write ecc to compare */
217 nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0];
218 nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2];
219 writel(nfmeccdata0, NFMECCDATA0);
220 writel(nfmeccdata1, NFMECCDATA1);
221
222 /* Read ecc status */
223 nfestat0 = readl(NFESTAT0);
224 err_type = nfestat0 & 0x3;
225
226 switch (err_type) {
227 case 0: /* No error */
228 ret = 0;
229 break;
230
231 case 1:
232 /*
233 * 1 bit error (Correctable)
234 * (nfestat0 >> 7) & 0x7ff :error byte number
235 * (nfestat0 >> 4) & 0x7 :error bit number
236 */
237 err_byte_addr = (nfestat0 >> 7) & 0x7ff;
238 repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7));
239
240 printf("S3C NAND: 1 bit error detected at byte %ld. "
241 "Correcting from 0x%02x to 0x%02x...OK\n",
242 err_byte_addr, dat[err_byte_addr], repaired);
243
244 dat[err_byte_addr] = repaired;
245
246 ret = 1;
247 break;
248
249 case 2: /* Multiple error */
250 case 3: /* ECC area error */
251 printf("S3C NAND: ECC uncorrectable error detected. "
252 "Not correctable.\n");
253 ret = -1;
254 break;
255 }
256
257 return ret;
258}
259#endif /* CFG_S3C_NAND_HWECC */
260
261/*
262 * Board-specific NAND initialization. The following members of the
263 * argument are board-specific (per include/linux/mtd/nand.h):
264 * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
265 * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
266 * - hwcontrol: hardwarespecific function for accesing control-lines
267 * - dev_ready: hardwarespecific function for accesing device ready/busy line
268 * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
269 * only be provided if a hardware ECC is available
270 * - eccmode: mode of ecc, see defines
271 * - chip_delay: chip dependent delay for transfering data from array to
272 * read regs (tR)
273 * - options: various chip options. They can partly be set to inform
274 * nand_scan about special functionality. See the defines for further
275 * explanation
276 * Members with a "?" were not set in the merged testing-NAND branch,
277 * so they are not set here either.
278 */
279int board_nand_init(struct nand_chip *nand)
280{
281 static int chip_n;
282
283 if (chip_n >= MAX_CHIPS)
284 return -ENODEV;
285
286 NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6;
287
288 nand->IO_ADDR_R = (void __iomem *)NFDATA;
289 nand->IO_ADDR_W = (void __iomem *)NFDATA;
290 nand->cmd_ctrl = s3c_nand_hwcontrol;
291 nand->dev_ready = s3c_nand_device_ready;
292 nand->select_chip = s3c_nand_select_chip;
293 nand->options = 0;
294#ifdef CONFIG_NAND_SPL
295 nand->read_byte = nand_read_byte;
296 nand->write_buf = nand_write_buf;
297 nand->read_buf = nand_read_buf;
298#endif
299
300#ifdef CFG_S3C_NAND_HWECC
301 nand->ecc.hwctl = s3c_nand_enable_hwecc;
302 nand->ecc.calculate = s3c_nand_calculate_ecc;
303 nand->ecc.correct = s3c_nand_correct_data;
304
305 /*
306 * If you get more than 1 NAND-chip with different page-sizes on the
307 * board one day, it will get more complicated...
308 */
309 nand->ecc.mode = NAND_ECC_HW;
310 nand->ecc.size = CFG_NAND_ECCSIZE;
311 nand->ecc.bytes = CFG_NAND_ECCBYTES;
312#else
313 nand->ecc.mode = NAND_ECC_SOFT;
314#endif /* ! CFG_S3C_NAND_HWECC */
315
316 nand->priv = nand_cs + chip_n++;
317
318 return 0;
319}