Tianrui Wei | 8a44fe6 | 2021-07-01 12:54:19 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* Copyright (c) 2021 Tianrui Wei <tianrui-wei@outlook.com> */ |
| 3 | |
| 4 | /* |
| 5 | * This dts is for a dual core instance of OpenPiton+Ariane built |
| 6 | * to run on a Digilent Genesys 2 FPGA at 66.67MHz. These files |
| 7 | * are automatically generated by the OpenPiton build system and |
| 8 | * this configuration may not be what you need if your configuration |
| 9 | * is different from the below. |
| 10 | */ |
| 11 | |
| 12 | /dts-v1/; |
| 13 | |
| 14 | / { |
| 15 | #address-cells = <2>; |
| 16 | #size-cells = <2>; |
| 17 | compatible = "openpiton,riscv64"; |
| 18 | |
| 19 | chosen { |
| 20 | stdout-path = "uart0:115200"; |
| 21 | }; |
| 22 | |
| 23 | aliases { |
| 24 | console = &uart0; |
| 25 | serial0 = &uart0; |
| 26 | }; |
| 27 | |
| 28 | cpus { |
| 29 | #address-cells = <1>; |
| 30 | #size-cells = <0>; |
| 31 | timebase-frequency = <520835>; |
| 32 | |
| 33 | CPU0: cpu@0 { |
| 34 | clocks = <&clk0>; |
| 35 | u-boot,dm-spl; |
| 36 | device_type = "cpu"; |
| 37 | reg = <0>; |
| 38 | compatible = "openhwgroup,cva6", "riscv"; |
| 39 | riscv,isa = "rv64imafdc"; |
| 40 | mmu-type = "riscv,sv39"; |
| 41 | tlb-split; |
| 42 | // HLIC - hart local interrupt controller |
| 43 | CPU0_intc: interrupt-controller { |
| 44 | #interrupt-cells = <1>; |
| 45 | interrupt-controller; |
| 46 | compatible = "riscv,cpu-intc"; |
| 47 | }; |
| 48 | }; |
| 49 | |
| 50 | CPU1: cpu@1 { |
| 51 | clocks = <&clk0>; |
| 52 | device_type = "cpu"; |
| 53 | reg = <1>; |
| 54 | compatible = "openhwgroup,cva6", "riscv"; |
| 55 | riscv,isa = "rv64imafdc"; |
| 56 | mmu-type = "riscv,sv39"; |
| 57 | tlb-split; |
| 58 | // HLIC - hart local interrupt controller |
| 59 | CPU1_intc: interrupt-controller { |
| 60 | #interrupt-cells = <1>; |
| 61 | interrupt-controller; |
| 62 | compatible = "riscv,cpu-intc"; |
| 63 | }; |
| 64 | }; |
| 65 | |
| 66 | }; |
| 67 | |
| 68 | clocks { |
| 69 | clk0: osc { |
| 70 | compatible = "fixed-clock"; |
| 71 | #clock-cells = <0>; |
| 72 | clock-frequency = <66667000>; |
| 73 | }; |
| 74 | }; |
| 75 | |
| 76 | memory@80000000 { |
| 77 | u-boot,dm-spl; |
| 78 | device_type = "memory"; |
| 79 | reg = < 0x00000000 0x80000000 0x00000000 0x40000000 >; |
| 80 | }; |
| 81 | |
| 82 | soc { |
Tianrui Wei | c9135d5 | 2021-07-07 15:48:22 +0800 | [diff] [blame] | 83 | #address-cells = <2>; |
| 84 | #size-cells = <2>; |
Tianrui Wei | 8a44fe6 | 2021-07-01 12:54:19 +0800 | [diff] [blame] | 85 | compatible = "openpiton,chipset", "simple-bus"; |
| 86 | ranges; |
| 87 | |
| 88 | uart0: uart@fff0c2c000 { |
| 89 | compatible = "ns16550", "openpiton,ns16550"; |
| 90 | reg = < 0x000000ff 0xf0c2c000 0x00000000 0x000d4000 >; |
| 91 | interrupt-parent = <&PLIC0>; |
| 92 | interrupts = <1>; |
| 93 | reg-shift = <0>; |
| 94 | // regs are spaced on 8 bit boundary |
| 95 | }; |
| 96 | |
| 97 | eth: ethernet@fff0d00000 { |
| 98 | compatible = "xlnx,xps-ethernetlite-1.00.a", "openpiton,ethernet"; |
| 99 | device_type = "network"; |
| 100 | reg = < 0x000000ff 0xf0d00000 0x00000000 0x00100000 >; |
| 101 | interrupt-parent = <&PLIC0>; |
| 102 | interrupts = <2>; |
| 103 | phy-handle = <&phy0>; |
| 104 | xlnx,duplex = <0x1>; |
| 105 | xlnx,include-global-buffers = <0x1>; |
| 106 | xlnx,include-internal-loopback = <0x0>; |
| 107 | xlnx,include-mdio = <0x1>; |
| 108 | xlnx,rx-ping-pong = <0x1>; |
| 109 | xlnx,s-axi-id-width = <0x1>; |
| 110 | xlnx,tx-ping-pong = <0x1>; |
| 111 | xlnx,use-internal = <0x0>; |
| 112 | axi_ethernetlite_0_mdio: mdio { |
| 113 | #address-cells = <1>; |
| 114 | #size-cells = <0>; |
| 115 | phy0: phy@1 { |
| 116 | compatible = "ethernet-phy-id001C.C915"; |
| 117 | device_type = "ethernet-phy"; |
| 118 | reg = <1>; |
| 119 | }; |
| 120 | }; |
| 121 | }; |
| 122 | |
| 123 | sdhci_0: sdhci@f000000000 { |
| 124 | u-boot,dm-spl; |
| 125 | compatible = "openpiton,piton-mmc", "openpiton,mmc"; |
| 126 | reg = < 0x000000f0 0x00000000 0x00000000 0x00300000 >; |
| 127 | }; |
| 128 | |
| 129 | clint@fff1020000 { |
| 130 | compatible = "sifive,clint0", "openpiton,clint"; |
| 131 | interrupts-extended = < &CPU0_intc 3 |
| 132 | &CPU0_intc 7 |
| 133 | &CPU1_intc 3 |
| 134 | &CPU1_intc 7 >; |
| 135 | reg = < 0x000000ff 0xf1020000 0x00000000 0x000c0000 >; |
| 136 | clocks = <&clk0>; |
| 137 | }; |
| 138 | |
| 139 | PLIC0: plic@fff1100000 { |
| 140 | u-boot,dm-spl; |
| 141 | #interrupt-cells = <1>; |
| 142 | compatible = "sifive,plic-1.0.0", "openpiton,plic"; |
| 143 | interrupt-controller; |
| 144 | interrupts-extended = < &CPU0_intc 11 |
| 145 | &CPU0_intc 9 |
| 146 | &CPU1_intc 11 |
| 147 | &CPU1_intc 9 >; |
| 148 | reg = < 0x000000ff 0xf1100000 0x00000000 0x04000000 >; |
| 149 | riscv,max-priority = <7>; |
| 150 | riscv,ndev = <2>; |
| 151 | }; |
| 152 | }; |
| 153 | }; |