Sanchayan Maity | a94bb7a | 2015-04-15 16:24:27 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2015 Sanchayan Maity <sanchayan.maity@toradex.com> |
| 3 | * Copyright (C) 2015 Toradex AG |
| 4 | * |
| 5 | * Based on ehci-mx6 driver |
| 6 | * |
| 7 | * SPDX-License-Identifier: GPL-2.0+ |
| 8 | */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <usb.h> |
| 12 | #include <errno.h> |
| 13 | #include <linux/compiler.h> |
| 14 | #include <asm/io.h> |
| 15 | #include <asm/arch/clock.h> |
| 16 | #include <asm/arch/imx-regs.h> |
| 17 | #include <asm/arch/crm_regs.h> |
| 18 | #include <asm/imx-common/iomux-v3.h> |
| 19 | #include <asm/imx-common/regs-usbphy.h> |
| 20 | #include <usb/ehci-fsl.h> |
| 21 | |
| 22 | #include "ehci.h" |
| 23 | |
| 24 | #define USB_NC_REG_OFFSET 0x00000800 |
| 25 | |
| 26 | #define ANADIG_PLL_CTRL_EN_USB_CLKS (1 << 6) |
| 27 | |
| 28 | #define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ |
| 29 | #define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ |
| 30 | |
| 31 | /* USBCMD */ |
| 32 | #define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ |
| 33 | #define UCMD_RESET (1 << 1) /* controller reset */ |
| 34 | |
| 35 | static const unsigned phy_bases[] = { |
| 36 | USB_PHY0_BASE_ADDR, |
| 37 | USB_PHY1_BASE_ADDR, |
| 38 | }; |
| 39 | |
| 40 | static const unsigned nc_reg_bases[] = { |
| 41 | USBC0_BASE_ADDR, |
| 42 | USBC1_BASE_ADDR, |
| 43 | }; |
| 44 | |
| 45 | static void usb_internal_phy_clock_gate(int index) |
| 46 | { |
| 47 | void __iomem *phy_reg; |
| 48 | |
| 49 | phy_reg = (void __iomem *)phy_bases[index]; |
| 50 | clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE); |
| 51 | } |
| 52 | |
| 53 | static void usb_power_config(int index) |
| 54 | { |
| 55 | struct anadig_reg __iomem *anadig = |
| 56 | (struct anadig_reg __iomem *)ANADIG_BASE_ADDR; |
| 57 | void __iomem *pll_ctrl; |
| 58 | |
| 59 | switch (index) { |
| 60 | case 0: |
| 61 | pll_ctrl = &anadig->pll3_ctrl; |
| 62 | clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS); |
| 63 | setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE |
| 64 | | ANADIG_PLL3_CTRL_POWERDOWN |
| 65 | | ANADIG_PLL_CTRL_EN_USB_CLKS); |
| 66 | break; |
| 67 | case 1: |
| 68 | pll_ctrl = &anadig->pll7_ctrl; |
| 69 | clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS); |
| 70 | setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE |
| 71 | | ANADIG_PLL7_CTRL_POWERDOWN |
| 72 | | ANADIG_PLL_CTRL_EN_USB_CLKS); |
| 73 | break; |
| 74 | default: |
| 75 | return; |
| 76 | } |
| 77 | } |
| 78 | |
| 79 | static void usb_phy_enable(int index, struct usb_ehci *ehci) |
| 80 | { |
| 81 | void __iomem *phy_reg; |
| 82 | void __iomem *phy_ctrl; |
| 83 | void __iomem *usb_cmd; |
| 84 | |
| 85 | phy_reg = (void __iomem *)phy_bases[index]; |
| 86 | phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); |
| 87 | usb_cmd = (void __iomem *)&ehci->usbcmd; |
| 88 | |
| 89 | /* Stop then Reset */ |
| 90 | clrbits_le32(usb_cmd, UCMD_RUN_STOP); |
| 91 | while (readl(usb_cmd) & UCMD_RUN_STOP) |
| 92 | ; |
| 93 | |
| 94 | setbits_le32(usb_cmd, UCMD_RESET); |
| 95 | while (readl(usb_cmd) & UCMD_RESET) |
| 96 | ; |
| 97 | |
| 98 | /* Reset USBPHY module */ |
| 99 | setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST); |
| 100 | udelay(10); |
| 101 | |
| 102 | /* Remove CLKGATE and SFTRST */ |
| 103 | clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST); |
| 104 | udelay(10); |
| 105 | |
| 106 | /* Power up the PHY */ |
| 107 | writel(0, phy_reg + USBPHY_PWD); |
| 108 | |
| 109 | /* Enable FS/LS device */ |
| 110 | setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 | |
| 111 | USBPHY_CTRL_ENUTMILEVEL3); |
| 112 | } |
| 113 | |
| 114 | static void usb_oc_config(int index) |
| 115 | { |
| 116 | void __iomem *ctrl; |
| 117 | |
| 118 | ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET); |
| 119 | |
| 120 | setbits_le32(ctrl, UCTRL_OVER_CUR_POL); |
| 121 | setbits_le32(ctrl, UCTRL_OVER_CUR_DIS); |
| 122 | } |
| 123 | |
Sanchayan Maity | 08c11cb | 2015-10-26 18:28:50 +0530 | [diff] [blame] | 124 | int __weak board_usb_phy_mode(int port) |
| 125 | { |
| 126 | return 0; |
| 127 | } |
| 128 | |
Sanchayan Maity | 60ed286 | 2015-06-01 18:37:24 +0530 | [diff] [blame] | 129 | int __weak board_ehci_hcd_init(int port) |
| 130 | { |
| 131 | return 0; |
| 132 | } |
| 133 | |
Sanchayan Maity | a94bb7a | 2015-04-15 16:24:27 +0530 | [diff] [blame] | 134 | int ehci_hcd_init(int index, enum usb_init_type init, |
| 135 | struct ehci_hccr **hccr, struct ehci_hcor **hcor) |
| 136 | { |
| 137 | struct usb_ehci *ehci; |
Sanchayan Maity | 08c11cb | 2015-10-26 18:28:50 +0530 | [diff] [blame] | 138 | enum usb_init_type type; |
Sanchayan Maity | a94bb7a | 2015-04-15 16:24:27 +0530 | [diff] [blame] | 139 | |
| 140 | if (index >= ARRAY_SIZE(nc_reg_bases)) |
| 141 | return -EINVAL; |
| 142 | |
Sanchayan Maity | a94bb7a | 2015-04-15 16:24:27 +0530 | [diff] [blame] | 143 | ehci = (struct usb_ehci *)nc_reg_bases[index]; |
| 144 | |
Sanchayan Maity | 60ed286 | 2015-06-01 18:37:24 +0530 | [diff] [blame] | 145 | /* Do board specific initialisation */ |
| 146 | board_ehci_hcd_init(index); |
| 147 | |
Sanchayan Maity | a94bb7a | 2015-04-15 16:24:27 +0530 | [diff] [blame] | 148 | usb_power_config(index); |
| 149 | usb_oc_config(index); |
| 150 | usb_internal_phy_clock_gate(index); |
| 151 | usb_phy_enable(index, ehci); |
| 152 | |
| 153 | *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); |
| 154 | *hcor = (struct ehci_hcor *)((uint32_t)*hccr + |
| 155 | HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); |
| 156 | |
Sanchayan Maity | 08c11cb | 2015-10-26 18:28:50 +0530 | [diff] [blame] | 157 | type = board_usb_phy_mode(index); |
| 158 | if (type != init) |
| 159 | return -ENODEV; |
| 160 | |
Sanchayan Maity | a94bb7a | 2015-04-15 16:24:27 +0530 | [diff] [blame] | 161 | if (init == USB_INIT_DEVICE) { |
| 162 | setbits_le32(&ehci->usbmode, CM_DEVICE); |
| 163 | writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); |
| 164 | setbits_le32(&ehci->portsc, USB_EN); |
| 165 | } else if (init == USB_INIT_HOST) { |
| 166 | setbits_le32(&ehci->usbmode, CM_HOST); |
| 167 | writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); |
| 168 | setbits_le32(&ehci->portsc, USB_EN); |
| 169 | } |
| 170 | |
| 171 | return 0; |
| 172 | } |
| 173 | |
| 174 | int ehci_hcd_stop(int index) |
| 175 | { |
| 176 | return 0; |
| 177 | } |